From: William Lee Irwin III <wli@holomorphy.com>
Move __set_page_dirty_buffers() to fs/buffer.c, as per the FIXME.
fs/buffer.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++
mm/page-writeback.c | 82 ----------------------------------------------------
2 files changed, 79 insertions(+), 82 deletions(-)
diff -puN fs/buffer.c~move-__set_page_dirty-buffers fs/buffer.c
--- 25/fs/buffer.c~move-__set_page_dirty-buffers 2003-04-15 00:07:59.000000000 -0700
+++ 25-akpm/fs/buffer.c 2003-04-15 00:07:59.000000000 -0700
@@ -779,6 +779,85 @@ void mark_buffer_dirty_inode(struct buff
EXPORT_SYMBOL(mark_buffer_dirty_inode);
/*
+ * Add a page to the dirty page list.
+ *
+ * It is a sad fact of life that this function is called from several places
+ * deeply under spinlocking. It may not sleep.
+ *
+ * If the page has buffers, the uptodate buffers are set dirty, to preserve
+ * dirty-state coherency between the page and the buffers. It the page does
+ * not have buffers then when they are later attached they will all be set
+ * dirty.
+ *
+ * The buffers are dirtied before the page is dirtied. There's a small race
+ * window in which a writepage caller may see the page cleanness but not the
+ * buffer dirtiness. That's fine. If this code were to set the page dirty
+ * before the buffers, a concurrent writepage caller could clear the page dirty
+ * bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean
+ * page on the dirty page list.
+ *
+ * There is also a small window where the page is dirty, and not on dirty_pages.
+ * Also a possibility that by the time the page is added to dirty_pages, it has
+ * been set clean. The page lists are somewhat approximate in this regard.
+ * It's better to have clean pages accidentally attached to dirty_pages than to
+ * leave dirty pages attached to clean_pages.
+ *
+ * We use private_lock to lock against try_to_free_buffers while using the
+ * page's buffer list. Also use this to protect against clean buffers being
+ * added to the page after it was set dirty.
+ *
+ * FIXME: may need to call ->reservepage here as well. That's rather up to the
+ * address_space though.
+ *
+ * For now, we treat swapper_space specially. It doesn't use the normal
+ * block a_ops.
+ */
+int __set_page_dirty_buffers(struct page *page)
+{
+ struct address_space * const mapping = page->mapping;
+ int ret = 0;
+
+ if (mapping == NULL) {
+ SetPageDirty(page);
+ goto out;
+ }
+
+ if (!PageUptodate(page))
+ buffer_error();
+
+ spin_lock(&mapping->private_lock);
+ if (page_has_buffers(page)) {
+ struct buffer_head *head = page_buffers(page);
+ struct buffer_head *bh = head;
+
+ do {
+ if (buffer_uptodate(bh))
+ set_buffer_dirty(bh);
+ else
+ buffer_error();
+ bh = bh->b_this_page;
+ } while (bh != head);
+ }
+ spin_unlock(&mapping->private_lock);
+
+ if (!TestSetPageDirty(page)) {
+ spin_lock(&mapping->page_lock);
+ if (page->mapping) { /* Race with truncate? */
+ if (!mapping->backing_dev_info->memory_backed)
+ inc_page_state(nr_dirty);
+ list_del(&page->list);
+ list_add(&page->list, &mapping->dirty_pages);
+ }
+ spin_unlock(&mapping->page_lock);
+ __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
+ }
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL(__set_page_dirty_buffers);
+
+/*
* Write out and wait upon a list of buffers.
*
* We have conflicting pressures: we want to make sure that all
diff -puN mm/page-writeback.c~move-__set_page_dirty-buffers mm/page-writeback.c
--- 25/mm/page-writeback.c~move-__set_page_dirty-buffers 2003-04-15 00:07:59.000000000 -0700
+++ 25-akpm/mm/page-writeback.c 2003-04-15 00:08:28.000000000 -0700
@@ -462,88 +462,6 @@ int write_one_page(struct page *page, in
EXPORT_SYMBOL(write_one_page);
/*
- * Add a page to the dirty page list.
- *
- * It is a sad fact of life that this function is called from several places
- * deeply under spinlocking. It may not sleep.
- *
- * If the page has buffers, the uptodate buffers are set dirty, to preserve
- * dirty-state coherency between the page and the buffers. It the page does
- * not have buffers then when they are later attached they will all be set
- * dirty.
- *
- * The buffers are dirtied before the page is dirtied. There's a small race
- * window in which a writepage caller may see the page cleanness but not the
- * buffer dirtiness. That's fine. If this code were to set the page dirty
- * before the buffers, a concurrent writepage caller could clear the page dirty
- * bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean
- * page on the dirty page list.
- *
- * There is also a small window where the page is dirty, and not on dirty_pages.
- * Also a possibility that by the time the page is added to dirty_pages, it has
- * been set clean. The page lists are somewhat approximate in this regard.
- * It's better to have clean pages accidentally attached to dirty_pages than to
- * leave dirty pages attached to clean_pages.
- *
- * We use private_lock to lock against try_to_free_buffers while using the
- * page's buffer list. Also use this to protect against clean buffers being
- * added to the page after it was set dirty.
- *
- * FIXME: may need to call ->reservepage here as well. That's rather up to the
- * address_space though.
- *
- * For now, we treat swapper_space specially. It doesn't use the normal
- * block a_ops.
- *
- * FIXME: this should move over to fs/buffer.c - buffer_heads have no business in mm/
- */
-#include <linux/buffer_head.h>
-int __set_page_dirty_buffers(struct page *page)
-{
- struct address_space * const mapping = page->mapping;
- int ret = 0;
-
- if (mapping == NULL) {
- SetPageDirty(page);
- goto out;
- }
-
- if (!PageUptodate(page))
- buffer_error();
-
- spin_lock(&mapping->private_lock);
- if (page_has_buffers(page)) {
- struct buffer_head *head = page_buffers(page);
- struct buffer_head *bh = head;
-
- do {
- if (buffer_uptodate(bh))
- set_buffer_dirty(bh);
- else
- buffer_error();
- bh = bh->b_this_page;
- } while (bh != head);
- }
- spin_unlock(&mapping->private_lock);
-
- if (!TestSetPageDirty(page)) {
- spin_lock(&mapping->page_lock);
- if (page->mapping) { /* Race with truncate? */
- if (!mapping->backing_dev_info->memory_backed)
- inc_page_state(nr_dirty);
- list_del(&page->list);
- list_add(&page->list, &mapping->dirty_pages);
- }
- spin_unlock(&mapping->page_lock);
- __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
- }
-
-out:
- return ret;
-}
-EXPORT_SYMBOL(__set_page_dirty_buffers);
-
-/*
* For address_spaces which do not use buffers. Just set the page's dirty bit
* and move it to the dirty_pages list. Also perform space reservation if
* required.
_