ChangeSet@1.1562, 2005-02-09 13:01:13-02:00, alanh@fairlite.demon.co.uk
[PATCH] Intel i915GM support (add PCI ID and small tweak)
Attached are some small diffs to support Intel's new chipset - i915GM.
ChangeSet@1.1561, 2005-02-09 12:33:55-02:00, chrisw@osdl.org
[PATCH] Fix potential leak of kernel data to user space in wireless private handler helper.
Jean Tourrilhes wrote:
> There is a potential leak of kernel data to user space in
> private handler handling. Few drivers use that feature, there is no
> risk of crash or direct attack, so I would not worry about it.
> Its not like you can read any arbitrary address, exploiting
> such a flaw is in my mind theoritical. Let's not overblow things,
> there are some real bugs to take care of.
If the fix is simple (as it appears to be), there's no good reason to
leave the risk there.
prism54 uses this, and is a reasonably popular card.
thanks,
-chris
===== net/core/wireless.c 1.4 vs edited =====
ChangeSet@1.1560, 2005-02-09 12:09:17-02:00, Mark.Haigh@spirentcom.com
[PATCH] arch/i386/kernel/pci-irq.c: Wrong message output
I'd submitted a patch earlier for this file, fixing a warning. When I
looked at it further, I noticed it can output an incorrect warning
message under certain circumstances. I've confirmed that this can and
does happen in the wild:
PCI: Enabling device 0000:00:0a.0 (0000 -> 0001)
PCI: No IRQ known for interrupt pin @ of device 0000:00:0a.0. Probably
buggy MP table.
It should read "No IRQ known for interrupt pin A", but the 'pin'
variable has already been decremented (from 1 to 0), so the line:
printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device
%s.%s\n", 'A' + pin - 1, dev->slot_name, msg);
causes "pin @" to be output, because 'A' + 0 - 1 == '@'.
This patch also fixes the original warning:
pci-irq.c: In function `pcibios_enable_irq':
pci-irq.c:1128: warning: 'msg' might be used uninitialized in this function
ChangeSet@1.1559, 2005-02-09 12:09:03-02:00, marcelo@logos.cnet
Cset exclude: Mark.Haigh@spirentcom.com|ChangeSet|20050203152306|59941
ChangeSet@1.1558, 2005-02-09 11:56:37-02:00, Mark.Haigh@spirentcom.com
[PATCH] sym53c8xx.c: Add ULL suffix to fix warning
Noticed that in drivers/scsi/sym53c8xx.c:
sym53c8xx.c:13185: warning: integer constant is too large for "long" type
Since we're not dealing with C99 (yet), this 64 bit integer constant
needs to be suffixed with ULL. Patch included.
Signed-off-by: Mark F. Haigh <Mark.Haigh@spirentcom.com>
ChangeSet@1.1557, 2005-02-09 10:04:36-02:00, marcelo@logos.cnet
Merge bk://kernel.bkbits.net/davem/sparc-2.4
into logos.cnet:/home/marcelo/bk/linux-2.4
ChangeSet@1.1539.1.10, 2005-02-08 16:00:23-08:00, davem@nuts.davemloft.net
[TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.1.9, 2005-02-08 16:00:02-08:00, grundler@parisc-linux.org
[TG3]: Clean up grc_local_ctrl usage.
Make the code more readable by only flipping the specific
bits that need to change each register write.
Signed-off-by: Grant Grundler (grundler@parisc-linux.org)
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1555, 2005-02-08 12:35:49-02:00, marcelo@logos.cnet
Solar Designer: missing f_maxcount initialization
ChangeSet@1.1539.3.4, 2005-02-07 20:24:13-08:00, davem@nuts.davemloft.net
[SPARC64]: Mask off stack ptr in alloc_user_space() for 32-bit.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1554, 2005-02-07 17:22:57-02:00, marcelo@logos.cnet
Linus Torvalds: Add extra debugging help for bad user accesses.
ChangeSet@1.1553, 2005-02-07 17:20:08-02:00, marcelo@logos.cnet
Linus Torvalds: backport 2.6 rw_verify_area() to check against file offset overflows
- Make generic rw_verify_area check against file offset overflows.
- Add 'f_maxcount' to allow filesystems to set a per-file maximum IO size.
- Rename "locks_verify_area()" to "rw_verify_area()" and clean up the arguments.
ChangeSet@1.1539.1.8, 2005-02-06 22:21:22-08:00, matthew@wil.cx
[IPV4]: ipconfig should use memmove() instead of strcpy()
strcpy is undefined if src and dest overlap. That's clearly possible
here with a sufficiently deep path on the server. Use memmove instead.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
ChangeSet@1.1539.1.7, 2005-02-06 22:01:47-08:00, tgraf@suug.ch
[NETLINK]: Use SKB_MAXORDER to calculate NLMSG_GOODSIZE
NLMSG_GOODSIZE specifies a good default size for the skb tailroom
used in netlink messages when the size is unknown at the time of
the allocation.
The current value doesn't make much sense anymore because
skb_shared_info isn't taken into account which means that
depending on the architecture NLMSG_GOOSIZE can exceed PAGE_SIZE
resulting in a waste of almost a complete page.
Using SKB_MAXORDER solves this potential leak at the cost of
slightly smaller but safer sizes for some architectures.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.1.6, 2005-02-06 21:47:40-08:00, shemminger@osdl.org
[PKT_SCHED]: netem: memory leak
Good catch.. netem needs to free skb's that are dropped due to loss
simulation.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.3.3, 2005-02-06 20:55:36-08:00, davem@nuts.davemloft.net
[SPARC64]: Add missing membars for xchg() and cmpxchg().
read_unlock should order all previous memory operations
before the atomic counter update to drop the lock.
The debugging version of write_unlock had a similar error.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.3.2, 2005-02-06 20:47:34-08:00, davem@nuts.davemloft.net
[SPARC64]: Add missing membars for xchg() and cmpxchg().
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1551, 2005-02-06 01:58:11-05:00, jgarzik@pobox.com
[libata ahci] Add support for ULi M5288
ChangeSet@1.1550, 2005-02-06 00:30:11-05:00, bunk@stusta.de
[PATCH] scsi/ahci.c: remove an unused function
The patch below removes an unused function from drivers/scsi/ahci.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1549, 2005-02-06 00:06:58-05:00, mkrikis@yahoo.com
[PATCH] libata: fix ata_piix on ICH6R in RAID mode
Here is the cleaned up patch (as you suggested) that enables ata_piix
to work in RAID mode on ICH6R. I tested it and it seems to behave
correctly
in all the modes---sees all 4 disks in IDE and RAID modes, doesn't
see any in Compatibility mode (which is right, because only two are
available and the regular IDE driver has picked them up already).
Change description: only test for PCI IDE legacy mode, via the
PCI programming interface register, if the PCI device is of class
PCI_CLASS_STORAGE_IDE.
Signed-off-by: Martins Krikis <mkrikis@yahoo.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548, 2005-02-05 21:56:29-05:00, jpaana@s2.org
[libata sata_promise] add PCI ID for new SATAII TX2 card
ChangeSet@1.1547, 2005-02-05 21:29:38-05:00, syntax@pa.net
[libata sata_sil] add another Seagate drive to blacklist
ChangeSet@1.1546, 2005-02-05 21:24:09-05:00, zaitcev@redhat.com
[libata] fix probe object allocation bugs
The code previously alloced a 2-entry array, then freed each
entry individually, for users of "combined mode".
Convert code to use allocation function that only allocates
one object at a time.
Also, un-export ata_pci_init_legacy_mode(), as its only user is
libata-core.
ChangeSet@1.1539.3.1, 2005-02-05 18:03:10-08:00, davem@nuts.davemloft.net
[SPARC64]: atomic and bitop fixes
1) Correct memory barriers. Routines not returning a value need
no memory barriers, however routines returning values do need
them.
2) Actually implement non-atomic ext2 bitops.
Thanks to Anton Blanchard for pointing out the memory barrier
requirements.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1545, 2005-02-05 20:31:23-05:00, russb@emc.com
[libata scsi] verify cmd bug fixes/support
Also, trim trailing whitespace.
ChangeSet@1.1539.1.5, 2005-02-05 17:09:11-08:00, herbert@gondor.apana.org.au
[NET]: Add barriers for dst refcnt.
In light of the recent discussion about sk_buff, I think we need
the following patch for dst_entry. This adds a memory barrier
before dst_release drops the refcnt, and a read memory barrier
before dst_destroy starts destroying the entry.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.1.4, 2005-02-05 16:56:05-08:00, herbert@gondor.apana.org.au
[NET]: Add missing memory barrier to kfree_skb().
Also kill kfree_skb_fast(), that is a relic from fast switching
which was killed off years ago.
The bug is that in the case where we do the atomic_read()
optimization, we need to make sure that reads of skb state
later in __kfree_skb() processing (particularly the skb->list
BUG check) are not reordered to occur before the counter
read by the cpu.
Thanks to Olaf Kirch and Anton Blanchard for discovering
and helping fix this bug.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.2.3, 2005-02-03 13:30:57-02:00, marcelo@logos.cnet
Changed VERSION to 2.4.30-pre1
ChangeSet@1.1539.2.2, 2005-02-03 13:23:06-02:00, Mark.Haigh@spirentcom.com
[PATCH] Remove redundant check and fix warning in pcibios_lookup_irq()
In arch/i386/kernel/pci-irq.c:pcibios_enable_irq(), there is a redundant
check:
if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
/* ... */
if (pin) {
We don't need the second 'if (pin)', as we already know it's nonzero
from the first check. Also note that this fixes the following warning
(which happens because gcc's isn't always perfect with determining
whether a variable is used uninitialized):
pci-irq.c: In function `pcibios_enable_irq':
pci-irq.c:1128: warning: 'msg' might be used uninitialized in this function
All the patch does is remove the duplicate check and shift everything
else over.
ChangeSet@1.1539.2.1, 2005-02-03 13:17:21-02:00, petrides@redhat.com
[PATCH] fix for memory corruption from /proc/kcore access
A fairly nasty memory corruption potential exists when
/proc/kcore is accessed and there are at least 62 vmalloc'd areas.
The problem is that get_kcore_size() does not properly account for
the elf_prstatus, elf_prpsinfo, and task_struct structure sizes in
the fabricated ELF header, and then elf_kcore_store_hdr() and its
associated calls to storenote() will possibly overrun the "elf_buf"
buffer allocated by read_kcore(). Because the requested buffer size
is rounded up to a page multiple, only certain ranges of counts of
vmalloc'd areas will actually lead to a memory corruption. When it
does happen, usually the end of the /proc/kcore reader's task_struct
ends up being copied into a slab page (or sometimes into a data page)
causing a kernel crash (or data corruption) at a later point in time.
The 1st hunk of the patch below fixes this problem. The latter 3
hunks correct the "p_filesz" value for the note section (which is
already initialized to 0 on line 232) as stored in the ELF header,
but these hunks are not necessary to fix the corruption possiblity.
The fix is already in 2.6.
ChangeSet@1.1539.1.3, 2005-02-02 15:43:09-08:00, davem@nuts.davemloft.net
[TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.1.2, 2005-02-02 15:42:40-08:00, mchan@broadcom.com
[TG3]: 5704 serdes fixes
- Fix capacitive coupling detection by reading the correct offset in sram
- Add support for different signal pre-emphasis on 5704S (used in some blade
servers)
- Improve 5704S link parallel detection. When autonegotiation fails, we only
detect link-up if we have PCS_SYNC and we are not receiving config code
words. This will prevent false link-up when only the rx cable is attached.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1539.1.1, 2005-02-02 14:06:35-08:00, tgraf@suug.ch
[PKT_SCHED]: Fix ingress qdisc to pick up IPv6 packets when using netfilter hooks.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1544, 2005-02-02 04:10:37-05:00, jgarzik@pobox.com
[libata sata_promise] support Promise SATAII TX2/TX4 cards
Originally from Peter Smith, with testing and additional
contributions from Jens Axboe.
ChangeSet@1.1543, 2005-02-02 04:10:25-05:00, albertcc@tw.ibm.com
[libata] SCSI-to-ATA translation fixes
Fixes lesser-used READ VERIFY and READ_16/WRITE_16 translations.
Changes:
#1. ata_scsi_rw_xlat():
Fix incorrect SCSI to ATA translation for 16 bytes SCSI Read/Write commands.
#2. Fix ata_scsi_verify_xlat():
Fix incorrect tf->hob_lbax translation.
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
ChangeSet@1.1542, 2005-02-02 04:10:03-05:00, jgarzik@pobox.com
[libata] Remove CDROM drive from PATA DMA blacklist
Mirrors changeset from Bart to drivers/ide/*
ChangeSet@1.1541, 2005-02-02 04:09:43-05:00, jgarzik@pobox.com
[libata] add DMA blacklist
Blacklist devices that seem to have some problem with DMA.
From drivers/ide/ide-dma.c blacklist.
ChangeSet@1.1540, 2005-02-01 22:20:57-05:00, achew@nvidia.com
[PATCH] sata_nv: enable generic class support for future NVIDIA SATA
This patch adds a new entry in the pci_device_id table that filters
by class code, in order to cause unlisted NVIDIA SATA controllers to
be probed. In the probe function, we determine whether the device is
a SATA or IDE controller by checking the device's bars (NVIDIA SATA
controllers will always have 6 bars). Bar5 I/O mapped vs. memory
mapped is now determined programmatically by looking at the resource
flags of the bar.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1521.19.2, 2005-02-01 12:26:07-08:00, davem@nuts.davemloft.net
[SPARC64]: __atomic_{add,sub}() must sign-extend return value.
Even though we declare these functions as returning
a 32-bit signed integer, the sparc64 ABI states that
such functions must properly sign-extend the return
value to the full 64-bits.
Due to this bug, parts of mm/rmap.c were misbehaving
when compiled with gcc-3.4 on sparc64. gcc-3.4 was
legally using a 64-bit comparison against zero with
the return value of __atomic_add().
I would like to thank Hugh Daniels and others for helping
to track down this peculiar bug.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.1.61, 2005-01-31 20:07:37-08:00, kaber@trash.net
[NETFILTER]: Fix ip_fw_compat.c build after IP_DEFRAG_* changes.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1537, 2005-01-31 01:36:12-05:00, len.brown@intel.com
Merge intel.com:/home/lenb/src/24-stable-dev
into intel.com:/home/lenb/src/24-latest-dev
ChangeSet@1.1521.22.1, 2005-01-31 00:38:19-05:00, len.brown@intel.com
Merge intel.com:/home/lenb/bk/linux-2.4.29
into intel.com:/home/lenb/src/24-stable-dev
ChangeSet@1.1536, 2005-01-31 00:13:49-05:00, len.brown@intel.com
Merge intel.com:/home/lenb/src/24-stable-dev
into intel.com:/home/lenb/src/24-latest-dev
ChangeSet@1.1521.20.18, 2005-01-29 14:26:17-02:00, james4765@cwazy.co.uk
[PATCH] lcd: fix memory leak in lcd_ioctl()
This patch fixes a memory leak in the FLASH_Burn ioctl for the Cobalt LCD interface driver.
Signed-off-by: James Nelson <james4765@gmail.com>
ChangeSet@1.1521.20.17, 2005-01-29 14:25:32-02:00, james4765@cwazy.co.uk
[PATCH] lcd: Add checks to CAP_SYS_ADMIN to potentially dangerous ioctl's
This patch adds CAP_SYS_ADMIN checks to the potentially dangerous ioctls FLASH_Erase and FLASH_Burn
in the Cobalt LCD interface driver.
Signed-off-by: James Nelson <james4765@gmail.com>
ChangeSet@1.1521.20.16, 2005-01-29 14:23:05-02:00, khali@linux-fr.org
[PATCH] I2C updates: Document that the "id" member of the i2c_client structure was discarded in Linux 2.6.
Original discussion:
http://archives.andrew.net.au/lm-sensors/msg29038.html
http://archives.andrew.net.au/lm-sensors/msg29041.html
Bottom line:
The "id" member of the i2c_client structure was discarded in Linux 2.6
due to a lack of consistent use and overall need. While we of course
won't backport this to Linux 2.4 so as to not break compatibility with
existing 2.4 drivers, it still seems wise to update the documentation so
that new drivers written for Linux 2.4 today (*sigh*) do not rely on it.
ChangeSet@1.1521.20.15, 2005-01-29 14:21:15-02:00, khali@linux-fr.org
[PATCH] I2C updates: small header cleanups
While editing i2c-algo-bit.c and i2c-algo-pcf.c (see 1/3 of this patch
set), I noticed that both files include header files they do not need at
all (namely linux/ioport.h and asm/uaccess.h). The following patch
cleans this, additionally bringing the files in line with what we have
in i2c CVS (thus the blank lines changes).
ChangeSet@1.1521.20.14, 2005-01-29 13:27:33-02:00, khali@linux-fr.org
[PATCH] I2C updates: The "bit" and "pcf" i2c algorithms should declare themselves fully I2C capable
Bottom line:
The "bit" and "pcf" i2c algorithms should declare themselves fully I2C
capable, but do not.
Credits go to Ian Campbell for noticing and proposing patches.
This is a backport from Linux 2.6.11-rc1.
ChangeSet@1.1521.18.4, 2005-01-28 22:30:08-05:00, mkrikis@yahoo.com
[PATCH] fix an oops in ata_to_sense_error
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1521.20.13, 2005-01-28 15:18:14-02:00, kronos@kronoz.cjb.net
[PATCH] Fix MSF overflow in ide-cd with multisession DVDs
This a backport of my patch that went into 2.6.10.
cdrom_read_toc (ide-cd.c) always reads the TOC using MSF format. If the
last session of the disk starts beyond block 1152000 (LBA) there's an
overflow in the MSF format and kernel complains:
Unable to identify CD-ROM format.
So read the multi-session TOC in LBA format in order to avoid an
overflow in MSF format with multisession DVDs.
Signed-off-by: Luca Tettamanti <kronos@kronoz.cjb.net>
ChangeSet@1.1521.20.12, 2005-01-28 07:46:20-02:00, npollitt@mvista.com
[PATCH] Configure mangles hex values
When doing a make oldconfig, the hex function strips the leading '0x' from hex
values. The '0x' is needed in the final autoconf.h, and its absence causes
the following problem.
If I start with a hex value in my config file like this:
CONFIG_LOWMEM_SIZE=0x40000000
When I run make oldconfig, it strips out the '0x' leaving this:
CONFIG_LOWMEM_SIZE=40000000
Then if I run make xconfig, this is not considered a valid hex value, so it
replaces my value with the default:
CONFIG_LOWMEM_SIZE=0x20000000
The following patch removes the lines that strip the 0x from the hex value.
It also checks the result for the leading 0x and inserts it if necessary.
ChangeSet@1.1521.20.11, 2005-01-28 07:43:18-02:00, marcelo@logos.cnet
Hugh Dickins: remove rlim_rss and this RLIMIT_RSS code from madvise. Presumably the code crept in by mistake.
Isn't the right fix just to remove rlim_rss and this RLIMIT_RSS code
from here? It's pretty silly for madvise alone to be taking notice
of it. Presumably the code crept in by mistake from some tree which
was using an RLIMIT_RSS patch on 2.4.
ChangeSet@1.1521.20.10, 2005-01-28 07:35:27-02:00, marcelo@logos.cnet
Cset exclude: dan@embeddedalley.com|ChangeSet|20050128083257|00819
ChangeSet@1.1521.20.9, 2005-01-28 06:32:57-02:00, dan@embeddedalley.com
[PATCH] add AMD Geode processor support
Here is a patch for 2.4 that adds the basic AMD Geode GX2/GX3
and GX1/SC1200 support. This patch updates configuration
scripts, defconfig, and setup files.
Signed-off-by: Dan Malek <dan@embeddedalley.com>
ChangeSet@1.1521.18.3, 2005-01-27 16:53:51-05:00, jason.d.gaston@intel.com
[PATCH] SATA AHCI support for Intel ICH7R
This patch adds the Intel ICH7R DID's to the ahci.c SATA AHCI driver
for ICH7R SATA support.
Signed-off-by: �Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1521.18.2, 2005-01-27 15:38:14-05:00, haroldo.gamal@infolink.com.br
[libata sata_sil] add another Seagate driver to blacklist
ChangeSet@1.1521.20.8, 2005-01-27 08:06:04-02:00, marcelo.tosatti@cyclades.com
[PATCH] Ake Sandgren: Fix RLIMIT_RSS madvise calculation bug
On Wed, Jan 26, 2005 at 12:07:50PM +0100, Ake wrote:
> Use of rlim[RLIMIT_RSS] in mm/filemap.c is wrong.
> It is passed down to kernel as a number of bytes but is being used as a
> number of pages.
>
> There is also a misinformative comment in fs/proc/array.c
> in proc_pid_stat where it says
> mm ? mm->rss : 0, /* you might want to shift this left 3 */
> the number 3 should probably be PAGE_SHIFT-10.
Amazing that this has never been noticed before - I bet not many people use RSS
limits with madvise().
This transform the rlimit in pages before the comparison, can you please test
it.
ChangeSet@1.1521.20.7, 2005-01-27 07:28:56-02:00, zaitcev@redhat.com
[PATCH] USB: Workarounds for Genesys Logics
Disk enclosures with Genesys Logics chipset require additional delays, or
commands are not processed. Also, their maximum transfer size is limited.
Patch by Martin Strigl.
ChangeSet@1.1521.20.6, 2005-01-27 07:28:42-02:00, zaitcev@redhat.com
[PATCH] USB: Prevent hiddev from looping
In the loop, schedule() returns with the current state TASK_RUNNING, so at the
next revolution it returns immediately, and the task sits there burning CPU.
The fix is to add the forgotten state assignment.
Patch from David Micon.
ChangeSet@1.1521.1.59, 2005-01-26 22:04:53-08:00, kaber@trash.net
[IPV4]: Keep fragment queues private to each user.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.1.58, 2005-01-26 15:10:46-08:00, davem@nuts.davemloft.net
[TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.1.57, 2005-01-26 15:10:13-08:00, mchan@broadcom.com
[TG3]: 5750 fixes
Some misc. fixes for 5750. The first 2 fixes below are for correctness.
- Do not set extended MAC addresses for 5750
- Do not set NIC ring addresses in send ring and receive return ring
RCBs for 5750
- Check eeprom write protect bit for 5750
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.20.5, 2005-01-26 10:10:40-02:00, mauelshagen@redhat.com
[PATCH] fix panics while backing up LVM snapshots
this patch fixes lvm-snap.c in order to avoid a list update
on the snapshot exception hash happening while only holding a
read lock as documented in Red Hat bugzilla #135266.
ChangeSet@1.1499.5.2, 2005-01-26 03:49:55-05:00, len.brown@intel.com
[ACPI] via interrupt quirk fix from 2.6
http://bugzilla.kernel.org/show_bug.cgi?id=3319
Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com.
ChangeSet@1.1521.1.56, 2005-01-25 22:06:47-08:00, tgraf@suug.ch
[NET]: Set NLM_F_MULTI for neighbour rtnetlink messages to userspace.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.1.55, 2005-01-25 21:32:20-08:00, mostrows@watson.ibm.com
[MAINTAINERS]: Fix my email address in PPPOE entry.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.20.4, 2005-01-25 06:56:30-02:00, marcelo@logos.cnet
Cset exclude: temnota@kmv.ru|ChangeSet|20050119161632|63236
ChangeSet@1.1521.1.54, 2005-01-24 17:41:05-08:00, davem@nuts.davemloft.net
[TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.1.53, 2005-01-24 17:40:28-08:00, mchan@broadcom.com
[TG3]: Fix TSO for 5750
- Fix TSO for 5750 chips by setting tcp checksum field to 0 for TSO packets
- Add TG3_FLG2_HW_TSO flag for 5750 and newer chips that use the same TSO
scheme
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.20.3, 2005-01-24 21:16:35-02:00, marcelo@logos.cnet
Merge bk://linux@linux.bkbits.net/linux-2.4
into logos.cnet:/home/marcelo/bk/linux-2.4
ChangeSet@1.1521.21.2, 2005-01-24 16:59:07-02:00, paul.clements@steeleye.com
[PATCH] Rogier Wolff: fix nbd ioctl permissions
Here's a patch for nbd that Rogier recently sent me. It allows non-root
to do BLKGETSIZE, et al. on nbd devices, which he needs for his data
recovery applications.
From: Rogier Wolff <R.E.Wolff@BitWizard.nl>
Signed-Off-By: Paul Clements <Paul.Clements@SteelEye.com>
Description: We shouldn't need CAP_SYS_ADMIN to ask for disk capacity and such.
ChangeSet@1.1521.21.1, 2005-01-24 16:51:44-02:00, marcelo@logos.cnet
[PATCH] Karsten Keil: Eicon Diva PCI 2.02 bugfix
This bugfix solve a race between card initialization and S0
bus events, if the S0 bus is already active on driver load
time.
Signed-off-by: Karsten Keil <kkeil@suse.de>
ChangeSet@1.1521.20.2, 2005-01-24 12:48:08-02:00, paul.clements@steeleye.com
[PATCH] nbd: fix ioctl permissions
Here's a patch for nbd that Rogier recently sent me. It allows non-root
to do BLKGETSIZE, et al. on nbd devices, which he needs for his data
recovery applications.
ChangeSet@1.1521.20.1, 2005-01-24 07:36:05-02:00, khali@linux-fr.org
[PATCH] PCI: Kill duplicate definition of INTEL_82801DB_10
I noticed that PCI_DEVICE_ID_INTEL_82801DB_10 is currently defined twice
in linux-2.4.29/include/linux/pci_ids.h. The trivial patch below kills
the second definition.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
ChangeSet@1.1521.1.52, 2005-01-22 19:47:23-08:00, davem@nuts.davemloft.net
[TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.19.1, 2005-01-21 13:59:28-08:00, krzysztof.h1@wp.pl
[SPARC]: Fix asm constraints in muldiv.c
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.1.51, 2005-01-20 16:31:46-08:00, mchan@broadcom.com
[TG3]: add tg3_set_eeprom()
- Add nvram size detection
- Add appropriate byte swapping to tg3_get_eeprom so that the same byte
stream is read in all systems
- Fix tg3_get_eeprom to read both eeprom and flash
- Add tg3_set_eeprom to write eeprom and flash
- Change tg3_nvram_init to detect all supported nvram devices
- Change tg3_nvram_read to properly detect Atmel flash that requires
address translation
- Increase nvram polling delay to account for slower eeprom devices
- Remove some of the flushing read that is not required for the
production 5750 devices
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1521.1.49, 2005-01-19 14:57:17-02:00, trini@kernel.crashing.org
[PATCH] ppc32: Fix a problem with the TLB Miss handler
There is a problem in the TLB Miss (and Error, as they jump to the Miss
handler) handlers. The problem is that when an app spans more than one
L1 entry, we don't have all of the correct information, and do_page_fault()
things a protection fault happened, when it didn't really. The fix for
this is to modify the handlers slightly to force a TLB Error in this case.
Lots of suggestions from: Joakim Tjernlund <joakim.tjernlund@lumentis.se>
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
ChangeSet@1.1521.1.48, 2005-01-19 14:16:32-02:00, temnota@kmv.ru
[PATCH] Prevent NMI oopser from triggering when megaraid2 waits for abort/reset cmd completion
> We should backport msleep() in 2.4.29-pre1.
Ok, msleep() backported, but driver isn't fixed. This patch acceptable?
Prevent NMI oopser kill kernel thread when megaraid2 driver waiting
abort or reset command completion.
Signed-off-by: Andrey Melnikov <temnota+kernel@kmv.ru>
ChangeSet@1.1521.1.47, 2005-01-19 14:09:30-02:00, marcelo@logos.cnet
Change VERSION to v2.4.29
TAG: v2.4.29