ChangeSet@1.1562, 2005-03-03 09:39:57-03:00, marcelo@logos.cnet
Allow lseek on SCSI tapes
ChangeSet@1.1560, 2005-03-02 14:12:47-08:00, davem@nuts.davemloft.net
[SPARC64]: Accept 'm5823' clock chip as seen on SB1500.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1558.1.2, 2005-03-02 13:55:07-03:00, marcelo@logos.cnet
Cset exclude: solar@openwall.com|ChangeSet|20041125155150|65356
ChangeSet@1.1558.1.1, 2005-02-27 11:33:05-08:00, davem@nuts.davemloft.net
[AF_UNIX]: Fix SIOCINQ for STREAM.
We should report the total bytes in the whole receive
queue, not just the first packet, in these cases.
Reported by Uwe Bonnes.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1559, 2005-02-26 13:27:40-08:00, krzysztof.h1@wp.pl
[SPARC]: DBRI fixes and improvements
- [audio.c] Added missing semicolon when debug information is enabled
(compilation bug).
- [audio.c] Number of input and output 8KB buffers is now a module
parameter as previous authors requested. More buffers should help on
slower machines.
- [audio.c] Fixes some debug strings, so compilation warnings are gone
(when debug is enabled).
- [dbri.c] Added missing dbri_get_formats() function, so sox/play now
plays sound files without forcing it to Sun audio output interface (OSS
works).
- [dbri.c] Enabled burst transfers for DBRI.
- [dbri.c] Added a fix to not leave few bytes in a next memory chunk
when building chain of output data buffers for DBRI. It is really a
critical thing if the next change is applied.
- [dbri.c] [the most important one] Writing an output data (playback)
returns immediately which allows audio player to prepare next data when
an audio codec is playing the previous. It removes clicking noise on
output signal.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1558, 2005-02-26 10:45:45-03:00, slee@netengine1.com
[PATCH] Fix units/partition count in sd.c
Symptom:
When a scsi disk is removed other scsi disk with biggest minor #
disapears in /proc/partition at the same time.
Cause and fix:
sd.c decreases nr_real on disk removal but because nr_real is not
real # of devices but max # of devices of a major #,
it doesn't need to be changed on disk add/remove.
2.6 has little different structure but it does like this
sd.c:sd_probe()
gd->minors = 16;
ChangeSet@1.1557, 2005-02-26 09:59:34-03:00, solar@openwall.com
[PATCH] Fix proc_tty.c comment typos
ChangeSet@1.1556, 2005-02-26 09:28:54-03:00, solar@openwall.com
[PATCH] Fix for swapoff after re-creating device files
$SUBJECT says it all - if device is recreated the current dentry-only
comparison in sys_swapoff() might have problems.
ChangeSet@1.1555, 2005-02-26 06:59:14-03:00, hifumi.hisashi@lab.ntt.co.jp
[PATCH] BUG on error handlings in Ext3 under I/O
I found bugs on error handlings in the functions arround the file system,
which cause inadequate completions of synchronous write I/O operations
when disk I/O failures occur.
I carried out following experiment:
1. Mount a ext3 file system on a SCSI disk with ordered mode.
2. Open a file on the file system with O_SYNC|O_RDWR|O_TRUNC|O_CREAT flag.
3. Write 512 bytes data to the file by calling write() every 5 seconds, and
examine return values from the syscall.
from write().
4. Disconnect the SCSI cable, and examine messages from the kernel.
After the SCSI cable is disconnected, write() must fail. But write()
succeeded for a while even though messages of the kernel notified SCSI I/O error.
By applying following modifications, the above problem was solved.
In fact I have send patch for both 2.4 and 2.6 to Andrew, but only 2.6 was
accepted.
So I send you my patch for the 2.4 kernel.
Please consider applying this patch to the 2.4 mainline kernel.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@lab.ntt.co.jp>
ChangeSet@1.1548.1.11, 2005-02-26 04:19:29-05:00, linville@tuxdriver.com
[PATCH] tulip: make tulip_stop_rxtx() wait for DMA to fully stop
tulip_stop_rxtx() doesn't wait for DMA to fully stop like the function
call name implies.
Acked-by: Grant Grundler <grant.grundler@hp.com>
Acked-by: Charlie Brett <charlie.brett@hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1554, 2005-02-25 18:19:47-03:00, zwane@arm.linux.org.uk
[PATCH] Fix timer override on nforce
Per our discussion, i've ported the 2.6 nforce skip timer override (and
early PCI access) code to 2.4. This fixes an issue whereupon nforce
systems have incorrect override values for irq0. Architectures affected
are i386 and x86_64
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
ChangeSet@1.1553, 2005-02-25 17:35:21-03:00, Matt_Domsch@dell.com
[PATCH] aic7xxx: don't reset chip on pause
(resend)
Patch below taken from RHEL3 Update 4 kernel 2.4.21-27.EL, fixes a bug
in the aic79xx and aic7xxx drivers, where upon trying to pause the
controller chip, it is accidentally hard-reset. This causes PCI
Parity errors to appear on Dell PowerEdge 4600 servers as the inb()
immediately after accidental reset receives corrupted data.
Patch was submitted by Justin Gibbs many moons ago, but never applied
to mainline 2.4. It's in mainline 2.6. Marcelo, please apply.
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
ChangeSet@1.1552, 2005-02-25 17:24:34-03:00, paulkf@microgate.com
[PATCH] fix synclinkmp register access typo
Fix typo to correctly access
rx ready control (RRC) register instead of
the tx ready control (TRC0) register.
ChangeSet@1.1551, 2005-02-25 17:19:51-03:00, marcelo@logos.cnet
Merge bk://kernel.bkbits.net/davem/sparc-2.4
into logos.cnet:/home/marcelo/bk/linux-2.4
ChangeSet@1.1537.8.3, 2005-02-25 11:06:47-08:00, davem@nuts.davemloft.net
[SPARC64]: Fix 32bit compat layer bugs in sys_ipc() and sys_rt_sigtimedwait().
1) sys_ipc() compat wrappers need to verify length
before allocating kernel data and performing copies.
2) sys_rt_sigtimedwait() had one schedule_timeout() too
many.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1537.6.12, 2005-02-24 14:53:59-05:00, jgarzik@pobox.com
[libata ahci] Print out port id on error messages
Pointed out by Justin Cormack, Brett Russ, and others.
ChangeSet@1.1548.1.10, 2005-02-24 00:41:15-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Driver version white space,
10 Driver version number, white space, comments, device id & other changes
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.9, 2005-02-24 00:41:10-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Fixes related to Cable length
9 Fixes related to Cable length estimation
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.8, 2005-02-24 00:41:05-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Report failure code when loopback
8 Report failure code when loopback test fails
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.7, 2005-02-24 00:41:00-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Checks for desc ring/rx data
7 Add checks for desc ring/rx data bufs spanning 64k address boundary
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.6, 2005-02-24 00:40:56-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Patch from Peter Kjellstroem --
6 Patch from Peter Kjellstroem -- fix lockup with 82547
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.5, 2005-02-24 00:40:51-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Fix WOL settings in 82544 based
5 Fix WOL settings in 82544 based adapters
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.4, 2005-02-24 00:40:46-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Delay clean-up of last Tx buffer
4 Delay clean-up of last Tx buffer to fix pre-mature writeback of Tx descriptors.
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.3, 2005-02-24 00:40:41-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: Avoid race between e1000_watchdog
3 Avoid race condition between e1000_watchdog and e1000_clean_tx_irq
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.2, 2005-02-24 00:40:36-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: 2 use netif_poll_{enable|disable}
2 use netif_poll_{enable|disable} to synchronize between poll and i/f down/up
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1548.1.1, 2005-02-24 00:40:31-05:00, mallikarjuna.chilakala@intel.com
[PATCH] e1000: 1 Robert Olsson's fix and
1 Rober Olsson's fix and refinement to the poll routine
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1537.6.11, 2005-02-24 00:38:15-05:00, jgarzik@pobox.com
[libata] Use DMA_{32,64}BIT_MASK in ahci, sata_vsc drivers.
Similar to a patch applied in 2.6.x by Tobias Klauser.
ChangeSet@1.1537.6.10, 2005-02-24 00:32:06-05:00, mlord@pobox.com
[libata qstor] minor update per LKML comments
* use __le{32,64}
* use DMA_{32,64}BIT_MASK
Also, add these to linux/libata-compat.h since they are not
defined in 2.4.x.
ChangeSet@1.1537.6.9, 2005-02-23 15:10:27-05:00, jgarzik@pobox.com
[libata] Add missing hooks, to avoid oops in advanced SATA drivers
Advanced SATA drivers should not (and cannot) use the basic
PCI IDE hooks for checking the Status and Error registers, as these
registers are either in non-standard locations, or simply don't
exist.
In the error handling path, libata was unconditionally calling some
PCI IDE hardware bitbanging functions, which would cause an oops
in the AHCI driver and any other advanced libata driver.
ChangeSet@1.1550, 2005-02-23 05:03:49-03:00, marcelo@dmt.cnet
Changed VERSION to v2.4.30-pre2
TAG: v2.4.30-pre2