ChangeSet@1.1208.1.1, 2003-05-03 22:48:53-07:00, rth@eeyore.twiddle.net
Fix unwind info for sysenter entry point.
Add unwind info for sigreturn entry points.
ChangeSet@1.1218, 2003-05-03 18:50:19-07:00, roland@redhat.com
[PATCH] allow ptrace and /proc/PID/mem to read fixmap pages
This allows access to the globally shared FIXMAP mapping for ptrace
and frieds, so that debuggers can sanely trace through the vsyscall
sequence.
ChangeSet@1.1217, 2003-05-03 18:42:55-07:00, levon@movementarian.org
[PATCH] OProfile update
Schedule work away on an unmap, instead of calling it directly. Should result
in less lost samples, and it fixes a lock ordering problem buffer_sem <-> mmap_sem
ChangeSet@1.1216, 2003-05-03 18:42:47-07:00, levon@movementarian.org
[PATCH] OProfile update
Change the lost_mmap_sem stat to lost_no_mm, and account it.
ChangeSet@1.1215, 2003-05-03 18:42:38-07:00, levon@movementarian.org
[PATCH] OProfile update
We were doing del_timer_sync() on shutdown, but not ensuring that any queued work
was done as well.
ChangeSet@1.1214, 2003-05-03 18:42:29-07:00, levon@movementarian.org
[PATCH] OProfile update
Now we don't do buffer syncs whilst holding current's mmap_sem ever,
we can wait to hold it. Also take task_lock and try to improve the docs a bit.
ChangeSet@1.1213, 2003-05-03 18:42:19-07:00, levon@movementarian.org
[PATCH] OProfile update
If there's are multiple tasks sleeping inside the read routine ever, this is necessary.
ChangeSet@1.1212, 2003-05-03 18:42:12-07:00, levon@movementarian.org
[PATCH] OProfile update
Clear up the code around start_sem so it's more obvious, and remove a pointless
down/up pair on buffer_sem (shutdown is already synchronised in sync_stop()).
ChangeSet@1.1211, 2003-05-03 18:42:02-07:00, levon@movementarian.org
[PATCH] OProfile update
Consolidate all the arch copies of timer_int.c into one place. Also fixes
a problem with PA-RISC not using instruction_pointer() when it should.
ChangeSet@1.1210, 2003-05-03 18:41:31-07:00, levon@movementarian.org
[PATCH] OProfile update
Convention is that error returns are negative.
ChangeSet@1.1209, 2003-05-03 18:36:37-07:00, torvalds@home.transmeta.com
Revert pmd/pgd slabification. wli will fix it properly
Cset exclude: akpm@digeo.com|ChangeSet|20030204165956|06074
Cset exclude: akpm@digeo.com|ChangeSet|20030204165949|06077
ChangeSet@1.1207, 2003-05-03 10:39:08-07:00, paulkf@microgate.com
[PATCH] pci.ids update
This patch adds new PCI IDs to the drivers/pci/pci.ids file.
ChangeSet@1.1206, 2003-05-03 10:39:00-07:00, paulkf@microgate.com
[PATCH] Added new PCI ID
ChangeSet@1.1205, 2003-05-03 10:38:26-07:00, torvalds@home.transmeta.com
PCI ID's for Quadrics from Daniel Blueman
ChangeSet@1.1202, 2003-05-03 10:01:33-07:00, jmorris@intercode.com.au
[NET]: Cosmetic cleanups of jhash code.
- Consistent naming (i.e. jhash_xxx)
- Reduces the 2&1 word variants to call jhash_3words()
- Replaces __inline__ with inline.
ChangeSet@1.1201, 2003-05-03 08:03:38-07:00, laforge@netfilter.org
[NETFILTER]: Trivial but important state fix for ipt_conntrack.
ChangeSet@1.1200, 2003-05-03 01:55:30-07:00, davem@nuts.ninka.net
[IPV4]: Add missing init_timer for rt_secret_timer.
ChangeSet@1.1199, 2003-05-03 01:41:16-07:00, niv@us.ibm.com
[AF_UNIX]: Fix max_dgram_qlen procfs permissions.
ChangeSet@1.1198, 2003-05-03 01:13:39-07:00, davem@nuts.ninka.net
Merge bk://kernel.bkbits.net/acme/net_family-2.5
into nuts.ninka.net:/home/davem/src/BK/net-2.5
ChangeSet@1.1197, 2003-05-03 01:06:51-07:00, davem@nuts.ninka.net
[IPV4]: Fix typo in hashing changes.
ChangeSet@1.1196, 2003-05-03 00:54:29-07:00, davem@nuts.ninka.net
[IPV4]: Fix ip_rt_acct reading.
ChangeSet@1.1195, 2003-05-03 00:43:27-07:00, davem@nuts.ninka.net
[NET]: Fix hashing exploits in ipv4 routing, IP conntrack, and TCP synq.
Several hash table implementations in the networking were
remotely exploitable. Remote attackers could launch attacks
whereby, using carefully choosen forged source addresses, make
every routing cache entry get hashed into the same hash chain.
Netfilter's IP conntrack module and the TCP syn-queue implementation
had identical vulnerabilities and have been fixed too.
The choosen solution to the problem involved using Bob's Jenkins
hash along with a randomly choosen input. For the ipv4 routing
cache we take things one step further and periodically choose a
new random secret. By default this happens every 10 minutes, but
this is configurable by the user via sysctl knobs.
ChangeSet@1.1190.1.21, 2003-05-03 03:43:10-03:00, acme@conectiva.com.br
o ipv4: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops
registered with the core. The sk_set_owner cases are in the callers
of tp->af_specific->syn_recv_sock so as to not have spurious extra
sk_set_owner calls in the ipv6 code that reuses ipv4 code.
ChangeSet@1.1190.1.20, 2003-05-03 03:42:36-03:00, acme@conectiva.com.br
o ipv6: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops
registered with the core, also remove the MOD_{INC,DEC}_USE_COUNT,
as they are not needed anymore with this new net module infrastructure
for struct sock and struct socket. (well, see the netdev discussion :)
ChangeSet@1.1190.1.19, 2003-05-03 03:41:55-03:00, acme@conectiva.com.br
o sctp: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.18, 2003-05-03 03:41:14-03:00, acme@conectiva.com.br
o x25: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.17, 2003-05-03 03:40:29-03:00, acme@conectiva.com.br
o wanpipe: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.16, 2003-05-03 03:39:46-03:00, acme@conectiva.com.br
o unix: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.15, 2003-05-03 03:38:52-03:00, acme@conectiva.com.br
o rose: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.14, 2003-05-03 03:38:04-03:00, acme@conectiva.com.br
o packet: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.13, 2003-05-03 03:34:13-03:00, acme@conectiva.com.br
o netrom: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.12, 2003-05-03 03:31:41-03:00, acme@conectiva.com.br
o netlink: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.11, 2003-05-03 03:23:58-03:00, acme@conectiva.com.br
o llc: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.10, 2003-05-03 03:20:22-03:00, acme@conectiva.com.br
o af_key: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.9, 2003-05-03 03:19:27-03:00, acme@conectiva.com.br
o irda: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.8, 2003-05-03 03:18:07-03:00, acme@conectiva.com.br
o ipx: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.7, 2003-05-03 03:16:52-03:00, acme@conectiva.com.br
o econet: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.6, 2003-05-03 03:16:12-03:00, acme@conectiva.com.br
o decnet: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.5, 2003-05-03 03:15:24-03:00, acme@conectiva.com.br
o ax25: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.4, 2003-05-03 03:14:32-03:00, acme@conectiva.com.br
o appletalk: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.3, 2003-05-03 03:13:25-03:00, acme@conectiva.com.br
o bluetooth: use revised net module infrastructure
Using THIS_MODULE in the struct proto_ops registered with the core.
ChangeSet@1.1190.1.2, 2003-05-03 03:01:05-03:00, acme@conectiva.com.br
o pppoe: use revised net module infrastructure
Using sk_set_owner and having THIS_MODULE in the struct proto_ops registered
with the core.
ChangeSet@1.1190.1.1, 2003-05-03 02:57:58-03:00, acme@conectiva.com.br
o net: improve the current module infrastructure
As per discussions in netdev we'll probably be moving to a brand new scheme, but this
set of changesets have been discussed and are an improvement to the current situation
and were already done prior to this thread happening.
ChangeSet@1.1193, 2003-05-03 02:17:31-03:00, acme@conectiva.com.br
o net/core/dev: another fix for the seq_file handling of /proc/net/dev
With this one and 100 dummy interfaces everything now is working
flawlessly, case closed :-)
ChangeSet@1.1192, 2003-05-03 02:15:44-03:00, acme@conectiva.com.br
o net/core/dev: add missing ++*pos in dev_seq_next
This cures the problem reported in lkml when there are lots
of net devices, tested with 50 dummy interfaces, there is
still one glitch when there are more info produced than
one page, where one entry is missed, I'm working on this
one now.
Ah, dev_seq_show needs only seq_puts, not the more expensive
seq_printf.
ChangeSet@1.1191, 2003-05-03 02:13:08-03:00, acme@conectiva.com.br
o net/core/dev: fix obvious bug in dev_get_idx.
Thanks to Randy Dunlap for spotting this one, now to study report
about /proc/net/dev breakage with many interfaces.
ChangeSet@1.1189.2.11, 2003-05-02 22:04:46+02:00, nathans@sgi.com
[XFS] Fix compile for Alpha architecture.
SGI Modid: 2.5.x-xfs:slinx:147717a
ChangeSet@1.1189.2.10, 2003-05-02 22:01:38+02:00, cattelan@sgi.com
[XFS] Rework the way xfs includes xfs_<blah>.h headers.
This reduces a lot of the compile dependencies�, and should
reduce some of the "recompile all" situations.
SGI Modid: 2.5.x-xfs:slinx:147637a
ChangeSet@1.1189.2.9, 2003-05-02 21:58:23+02:00, sandeen@sgi.com
[XFS] Make MODULE_AUTHOR consistent with other SGI modules
SGI Modid: 2.5.x-xfs:slinx:147518a
ChangeSet@1.1189.2.8, 2003-05-02 21:56:00+02:00, lord@sgi.com
[XFS] report extended attribute existence in the xattr flags field
SGI Modid: 2.5.x-xfs:slinx:146356a
ChangeSet@1.1189.2.7, 2003-05-02 21:54:06+02:00, lord@sgi.com
[XFS] Fix a use after free in the unwritten extent code. Also rework the
interface to the allocator to have its own flag set, and always
go through the same interface in all cases rather than having
unwritten extent requests take a different path from all others.
SGI Modid: 2.5.x-xfs:slinx:146678a
ChangeSet@1.1189.2.6, 2003-05-02 21:51:28+02:00, lord@sgi.com
[XFS] Rework the remount path to better seperate the linux vfs portion
and the xfs portion of it. Move the code to more appropriate
places in the tree.
SGI Modid: 2.5.x-xfs:slinx:146667a
ChangeSet@1.1189.2.5, 2003-05-02 21:41:07+02:00, nathans@sgi.com
[XFS] Add a validity check for unwritten extents, trying to trap a problem
on ia64.
SGI Modid: 2.5.x-xfs:slinx:144727a
ChangeSet@1.1189.2.4, 2003-05-02 21:38:37+02:00, nathans@sgi.com
[XFS] Fix build for big endian platforms; make xfs_xlate_dinode_core consistent.
SGI Modid: 2.5.x-xfs:slinx:144702a
ChangeSet@1.1189.2.3, 2003-05-02 21:36:22+02:00, cattelan@sgi.com
[XFS] Whitespace cleanup
Merge whitespace cleanup to 2.5 tree
SGI Modid: 2.5.x-xfs:slinx:144573a
ChangeSet@1.1189.2.2, 2003-05-02 21:32:43+02:00, nathans@sgi.com
[XFS] UUID cleanup - remove unused functions, create a decent table abstraction
and make the mount code simpler in the process.
SGI Modid: 2.5.x-xfs:slinx:144596a
ChangeSet@1.1189.2.1, 2003-05-02 21:30:40+02:00, nstraz@sgi.com
[XFS] Use "%p" to print out addresses from xfs_error_report(). This is so addresses
don't get truncated on 64-bit archs.
SGI Modid: 2.5.x-xfs:slinx:144138a
ChangeSet@1.1189.1.3, 2003-05-02 01:29:38-07:00, torvalds@home.transmeta.com
DRI texmem branch merge cleanups. Texture ages are unsigned, and
radeon should use generic texture structure now.
ChangeSet@1.1189.1.2, 2003-05-02 00:58:32-07:00, roland@redhat.com
[PATCH] Fix the DSO patch..
D'oh! My patch didn't include the new file:
ChangeSet@1.1189.1.1, 2003-05-01 23:18:50-07:00, roland@redhat.com
[PATCH] i386 vsyscall DSO implementation
This creates the full debugging input for the vsyscall page as a DSO,
allowing for debuggers and exception handlers to correctly handle the
processor state during the vsyscall.
There was a small bug in the core dump changes in the original patch I
posted. I fixed that, and the rest of the patch is unchanged.
ChangeSet@1.1187.1.5, 2003-05-01 09:32:29-07:00, bcollins@debian.org
[VIDEO]: Revert atyfb back to known working clean base.
ChangeSet@1.1187.1.4, 2003-05-01 08:03:38-07:00, davem@nuts.ninka.net
[SPARC64]: Update defconfig.
ChangeSet@1.1187.1.3, 2003-05-01 08:01:37-07:00, bcollins@debian.org
[VIDEO]: Revert cfbimgblt.c back to a working state on 64-bit.
ChangeSet@1.1187.2.1, 2003-05-01 03:25:51-07:00, jmorris@intercode.com.au
[IPSEC]: pmtu discovery support at local tunnel gateway.
ChangeSet@1.1187.1.2, 2003-05-01 01:17:41-07:00, bcollins@debian.org
[SPARC64]: Fix ioctl32.c in latest BK.
ChangeSet@1.1187.1.1, 2003-05-01 01:10:11-07:00, wesolows@foobazco.org
[SPARC]: Replace "magic" values.
ChangeSet@1.1189, 2003-04-30 21:52:59-07:00, ak@muc.de
[PATCH] discontigmem fix
Try to avoid calling "pfn_to_page()" on invalid pfn's. It used to be
legal, but the CONFIG_DISCONTIGMEM people want us to try to avoid it,
since they do magic stuff in their "pfn_to_page" translations.
ChangeSet@1.1188, 2003-04-30 21:44:30-07:00, ak@muc.de
[PATCH] x86-64 update
Just make x86-64/amd64 compile again. Only architecture specific
changes.
And a workaround for the Opteron prefetch bug.
Also remove the obsolete LVM1 ioctl emulation code.
ChangeSet@1.1187, 2003-04-30 18:13:50-07:00, ak@muc.de
[PATCH] Fix prefetch patching in 2.5-bk
Brown paperbag time. I forgot to take the modrm byte in account
with the prefetch patch replacement. With 3.2 it worked because
it used the right registers in my configuration.
But gcc 2.96 uses a different register in __dpath and the prefetch becomes
4 bytes with modrm and the original nop needs to be as long as that too.
ChangeSet@1.1186, 2003-04-30 18:00:45-07:00, akpm@digeo.com
[PATCH] cs46xx: fix incomplete search-and-replace
Leftovers from the mem_map_reserve-removal patch.
ChangeSet@1.1165.1.16, 2003-04-30 13:05:27-07:00, bcollins@debian.org
[PATCH] Merge to current SVN repo (r915)
Changes:
- Convert to a static highlevel handle for all drivers. Gets rid of
a kmalloc for each driver and consolidates the highlevel handle and
highlevel ops. Reduces points of failure as well.
- Move host number allocation to hosts.c, giving all drivers access to
it.
- Implemented S800 changes for core and sbp2. Thanks to TI and LaCie
for hardware to test this. 1394b support coming soon.
- Convert nodemgr to using a similar device classification hack as
usb. The old class_num hack I had in place was broken do to its
removal. This is a much cleaner solution.
ChangeSet@1.1165.1.15, 2003-04-30 12:27:09-07:00, pavel@ucw.cz
[PATCH] ioctl32: leftovers
Missed parts of the ioctl32 compatibility patch: a few ioctls from
PA-RISC, and missing <linux/compat_ioctl.h> file.
ChangeSet@1.1183, 2003-04-30 12:07:11-07:00, James@superbug.demon.co.uk
[PATCH] USB: Add support for Pentax Still Camera to linux kernel
ChangeSet@1.1182, 2003-04-30 12:06:25-07:00, ccheney@cheney.cx
[PATCH] USB: vicam.c copyright patches
Here are two vicam.c patches to clean up and restore copyright notices
for 2.4.21-rc1 and 2.5.68-bk9. At some point in time Pavel and my
copyrights were remove inadvertenly from the code.
ChangeSet@1.1181, 2003-04-30 11:58:52-07:00, randy.dunlap@verizon.net
[PATCH] uinput.c: reduce stack usage
drivers/input/misc/uinput.c::uinput_alloc_device(): reduce stack size
from 0x480 to 0x24;
ChangeSet@1.1180, 2003-04-30 11:58:30-07:00, randy.dunlap@verizon.net
[PATCH] sidewinder: reduce stack usage
reduce stack usage in sw_connect() from 0x490 to 0x98 on P4 SMP (gcc 3.2);
ChangeSet@1.1179, 2003-04-30 11:57:51-07:00, gj@pointblue.com.pl
[PATCH] USB: fix usbkbd.c compilation error
ChangeSet@1.1165.1.14, 2003-04-30 11:12:00-07:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] Kill dups of read_24(), rename it to ide_read_24().
- kill dups in ide.c and ide-disk.c
- read_24() is exported so rename it to ide_read_24()
- add it ide.h
ChangeSet@1.1165.1.13, 2003-04-30 11:11:52-07:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] Remove duplication of generic ide funcs from ide-taskfile.c.
They are unused, not needed and identical to generic ones so kill 'em:
task_read_24(),
task_try_to_flush_leftover_data(),
taskfile_dump_status(),
taskfile_error().
ChangeSet@1.1165.1.12, 2003-04-30 09:46:04-07:00, hch@lst.de
[PATCH] add an missing prototype to initrd.h
ChangeSet@1.1165.1.11, 2003-04-30 09:45:56-07:00, hch@lst.de
[PATCH] remove devfs hack from misc_register
There's an (fortunately unused) devfs in misc_register currently,
when the name of the miscdevice contains a slash the name is used
as devfs name instead of misc/<name>. Kill if as we have .devfs_name
for this kind of stuff now.
ChangeSet@1.1165.1.10, 2003-04-30 09:17:21-07:00, pavel@ucw.cz
[PATCH] ioctl32 cleanups
ioctl32 cleanups are pretty neccessary (we have 6+ copies of 600+
lines tables, all getting slightly out of sync, not speaking about
surrounding code produced by cut-and-paste).
ChangeSet@1.1165.1.9, 2003-04-30 08:41:51-07:00, hch@lst.de
[PATCH] use .devfs_name in struct miscdevice
There's three drivers in the tree that workaround the suboptimal
devfs name choice of the misc device layer (/dev/misc/<foo>) using
devfs_mk_symlink. Switch them to set miscdev.devfs_name instead
to get the right name from the very beginning.
ChangeSet@1.1165.6.24, 2003-04-30 07:34:03-07:00, akpm@digeo.com
[PATCH] oom-killer locking fix
From: William Lee Irwin III <wli@holomorphy.com>, Robert Love
Add some spinlock protection around the oom-killer state.
ChangeSet@1.1165.6.23, 2003-04-30 07:33:54-07:00, akpm@digeo.com
[PATCH] config menu cleanups
From Robert Day, through "Randy.Dunlap" <rddunlap@osdl.org>
This is a patch from Robert Day that does the following:
1) shift menu item in "Processor type and features" menu
2) clean up "Bus options" menu so it's actually hierarchical
Part of it (moving X86_IO_APIC around) looked a little odd to me,
so I asked Roman Zippel about it, and he replied:
"It's correct, although I wouldn't call it a 'design quirk'. :)
It forces one to group options which belong logically together and in this
case X86_IO_APIC is really a bit misplaced, even if it's not visible."
I have tested it (on 2.5.68-plain) and it does indeed make the menus
more hierarchical.
ChangeSet@1.1165.6.22, 2003-04-30 07:33:47-07:00, akpm@digeo.com
[PATCH] percpu counters cause UML compilation errors in with SMP
The percpu counters break UML SMP compilation (in current 2.5.58 bk snapshot)
(first NR_CPUS undeclared in header, then dereference of incomplete structure
in .c file)
ChangeSet@1.1165.6.21, 2003-04-30 07:33:38-07:00, akpm@digeo.com
[PATCH] aio support for block devices
From: Janet Morgan <janetmor@us.ibm.com>
Here's a small patch that adds aio_read and aio_write methods to the
block device driver.
ChangeSet@1.1165.6.20, 2003-04-30 07:33:29-07:00, akpm@digeo.com
[PATCH] zone accounting race fix
Fix a bug identified by Nikita Danilov: refill_inactive_zone() is deferring
the update of zone->nr_inactive and zone->nr_active for too long - it needs
to be consistent whenever zone->lock is not held.
ChangeSet@1.1165.6.19, 2003-04-30 07:33:21-07:00, akpm@digeo.com
[PATCH] lost_tick fixes
From: john stultz <johnstul@us.ibm.com>
- Whitespace fixes
- Fix for the case where HZ != 1000 (pointed out by Mika Penttila).
ChangeSet@1.1165.6.18, 2003-04-30 07:33:13-07:00, akpm@digeo.com
[PATCH] update nr_threads commentary
From: Manfred Spraul <manfred@colorfullife.com>
Update some no-longer-true comments around nr_threads locking.
ChangeSet@1.1165.6.17, 2003-04-30 07:33:04-07:00, akpm@digeo.com
[PATCH] fs/ext3/super.c fix for orphan recovery error path
From: Ernie Petrides <petrides@redhat.com>
The problem resolved by this patch is that if a root file system has an
error recorded from a previous mount, and then (when rebooting) the orphan
recovery procedure is initiated, the recovery is correctly skipped but the
file system is incorrectly left in a writable state.
This causes the subsequent fsck to fail due to the root file system
being dirty, and then requires manual intervention to get the system
fully booted.
ChangeSet@1.1165.6.16, 2003-04-30 07:32:57-07:00, akpm@digeo.com
[PATCH] simple mwave code cleanup
From: Paul B Schroeder <paulsch@haywired.net>
The following patch simply moves the 'nr_registered_attrs' and
'device_registered' variables in mwavedd.c into the MWAVE_DEVICE_DATA struct
which is defined in mwavedd.h..
ChangeSet@1.1165.6.15, 2003-04-30 07:32:48-07:00, akpm@digeo.com
[PATCH] buffer.c unused vars
- Remove dead variable from block_read_full_page (Oleg Drokin)
ChangeSet@1.1165.6.14, 2003-04-30 07:32:40-07:00, hch@lst.de
[PATCH] improved bdevname
ChangeSet@1.1165.6.13, 2003-04-30 07:32:31-07:00, akpm@digeo.com
[PATCH] proc_file_read fix
From: Miklos.Szeredi@eth.ericsson.se (Miklos Szeredi)
This fixes a problem with method 0 of proc_file_read (when the whole file
is copied to the page). The calculation of the final bytecount is wrong,
and hence smaller then page size reads will give a truncated file.
Current 2.4 kernels do it this way as well.
ChangeSet@1.1165.6.12, 2003-04-30 07:32:23-07:00, akpm@digeo.com
[PATCH] generic HDLC module API update
From: Krzysztof Halasa <khc@pm.waw.pl>
Updates the HDLC drivers to the approved module API.
ChangeSet@1.1165.6.11, 2003-04-30 07:32:14-07:00, akpm@digeo.com
[PATCH] allow modular JBD
From: Paul Clements <Paul.Clements@SteelEye.com>
Currently, when I build ext3 as a module, jbd gets built into the kernel
proper. This trivial patch allows jbd to be built as a module when ext3 is
also modular. I believe this is the intention, as this is how it works in
2.4. I've built and tested with modular jbd and ext3 on 2.5.68.
ChangeSet@1.1165.6.10, 2003-04-30 07:32:05-07:00, ak@muc.de
[PATCH] Update alt_instr to handle SSE2 prefetch and better nops
ChangeSet@1.1165.6.9, 2003-04-30 07:31:56-07:00, akpm@digeo.com
[PATCH] DAC960 patch to entry points with a new fix
From: Dave Olien <dmo@osdl.org>
Christoph submitted a patch to linus last week fixing up some DAC960 driver
entry points. That patch will OOPS during boot on version 2 controller
types. Christoph's version of the disk_size() function was dereferencing
a NULL pointer in it's "else" clause.
Christoph's patch hasn't appeared in linus's BK tree yet. So, I'm
resending Christoph's orignal patch with my fix to disk_size() included.
This patch can be applied to the driver in Linus's BK tree from April 28.
Here's Christoph's original description of his patch:
Some grepping showed that DAC960's open routine was duplicating parts
of check_disk_change(). I went on fixing this by implementing a
media_changed method and making DAC960_Open use it. While looking
at the surrounding code I noticed that
(a) all methods weren't using the private data the upperlayer
hands to it properly, but instead using kdev_t-based indexes
(b) DAC960_Open/DAC960_Release was keeping never used counters
(c) DAC960_Open was doing tons of checks the upperlayer already does
(d) DAC960_Release was entirely superflous.
The patch below corrects that and rewrites the block entry points
into readable code - 100 LOC are gone and the same amount replaced
by readable code.
ChangeSet@1.1165.6.8, 2003-04-30 07:31:48-07:00, akpm@digeo.com
[PATCH] Fix warnings in xd.c
Fix a few unused var warnings in drivers/block/xd.c
ChangeSet@1.1165.6.7, 2003-04-30 07:31:39-07:00, akpm@digeo.com
[PATCH] APM locking fix
From: Manfred Spraul <manfred@colorfullife.com>
apm.c:suspend() calls set_system_power_state() under (effectively)
spin_lock_irq(i8253_lock).
But set_system_power_state() unconditionally enables interrupts, in
apm_bios_call_simple(). This generates nasty warnings from the uniprocessor
spinlock debugging code, and would be deadlocky if APM worked on SMP.
So drop the locks around the set_system_power_state() call.
ChangeSet@1.1165.6.6, 2003-04-30 07:31:30-07:00, akpm@digeo.com
[PATCH] irqs: bttv
Update bttv driver to the new IRQ API.
ChangeSet@1.1165.6.5, 2003-04-30 07:31:22-07:00, akpm@digeo.com
[PATCH] Fix slab-vs-gfp bitflag clash
Fixes a bug spotted by Alexey Mahotkin <alexm@hsys.msk.ru>: the slab-internal
SLAB_NO_GROW bit clashes with __GFP_NORETRY.
Fix that up so it won't happen again by moving the bit layout into gfp.h.
ChangeSet@1.1165.6.4, 2003-04-30 07:31:14-07:00, akpm@digeo.com
[PATCH] irqs: IRDA
Some IRQ udpates for IRDA which seemed to get lost.
ChangeSet@1.1165.6.3, 2003-04-30 07:31:04-07:00, akpm@digeo.com
[PATCH] irqs: i2c
IRQ API udpate in i2c-elektor.c
ChangeSet@1.1165.6.2, 2003-04-30 07:17:42-07:00, rusty@rustcorp.com.au
[PATCH] __module_get
Introduces __module_get for places where we know we already hold
a reference and ignoring the fact that the module is being "rmmod --wait"ed
is simpler.
ChangeSet@1.1165.6.1, 2003-04-30 07:17:33-07:00, rusty@rustcorp.com.au
[PATCH] complete modinfo section
Restores .modinfo section, and uses it to store license and vermagic.
ChangeSet@1.1165.5.2, 2003-04-30 13:52:03+01:00, aia21@cantab.net
NTFS: 2.1.4 release - Reduce compiler requirements.
- Remove all uses of unnamed structs and unions in the driver to make
old and newer gcc versions happy. Makes it a bit uglier IMO but at
least people will stop hassling me
ChangeSet@1.1165.1.7, 2003-04-30 22:48:56+10:00, benh@kernel.crashing.org
PPC32: Fix for older SMP powermacs.
ChangeSet@1.1165.1.6, 2003-04-30 22:46:32+10:00, benh@kernel.crashing.org
PPC32: Updates for newer PowerMac/PowerBook machines.
ChangeSet@1.1165.1.5, 2003-04-30 22:41:51+10:00, paulus@samba.org
PPC32: Move xmon declarations to their own header file.
ChangeSet@1.1165.1.4, 2003-04-30 22:31:10+10:00, benh@kernel.crashing.org
PPC32: flush the cache more thoroughly on sleep.
ChangeSet@1.1165.2.10, 2003-04-30 02:04:09-07:00, davem@nuts.ninka.net
[PKT SCHED]; Missing semicolon in acme cleanups.
ChangeSet@1.1165.2.9, 2003-04-30 01:35:41-07:00, davem@nuts.ninka.net
[IPV4]: Fix typos in ipip.c commented out code.
ChangeSet@1.1165.2.8, 2003-04-30 01:34:59-07:00, davem@nuts.ninka.net
[IPV4]: Use dst_pmtu not dev->mtu to determine if fragmentation is needed.
ChangeSet@1.1165.2.7, 2003-04-30 01:32:32-07:00, akpm@digeo.com
[NETFILTER]: Put back missing list_head iterator local var.
ChangeSet@1.1165.4.2, 2003-04-30 01:07:03-07:00, zaitcev@redhat.com
[SPARC]: The iommu rewrite.
ChangeSet@1.1165.2.6, 2003-04-30 01:00:04-07:00, bdschuym@pandora.be
[NETFILTER]: Possible use of freed skbuff in netfilter.c
ChangeSet@1.1165.2.5, 2003-04-30 00:58:15-07:00, shemminger@osdl.org
[BRIDGE}: Change bridge forwarding table to use hlist.
ChangeSet@1.1165.3.1, 2003-04-30 04:17:25-03:00, shemminger@osdl.org
Replace br_lock() in snap with Read Copy Update.
Straightforward since SNAP uses list macros already.
Tested by bringing up/down Appletalk on SMP system and making sure packets
get through.
This is the last subsystem that depends on br_lock before IPV4,IPV6
can be converted.
ChangeSet@1.1165.2.3, 2003-04-29 23:45:14-07:00, robert.olsson@data.slu.se
[NET]: Remove skb_head_pool.
ChangeSet@1.1165.2.2, 2003-04-30 02:49:19-03:00, acme@conectiva.com.br
o net/sched: some trivial code cleanups, making some code smaller
Smaller by not calling write_unlock two times.
ChangeSet@1.1165.2.1, 2003-04-30 02:44:44-03:00, acme@conectiva.com.br
o net/llc: simple cleanups
. align switch with its cases
. fit some lines in 80 columns
ChangeSet@1.1178, 2003-04-29 16:14:49-07:00, greg@kroah.com
[PATCH] USB: add comment to storage/unusual_devs.h that specifies how to add new entries.
ChangeSet@1.1177, 2003-04-29 16:06:16-07:00, greg@kroah.com
[PATCH] USB: added support for Sony DSC-P8
Thanks to David Kimdon <David_Kimdon@alumni.hmc.edu> for the information.
ChangeSet@1.1176, 2003-04-29 16:05:39-07:00, linux-usb@gemeinhardt.info
[PATCH] USB: add support for Mello MP3 Player
ChangeSet@1.1165.1.2, 2003-04-29 15:48:59-07:00, torvalds@home.transmeta.com
Merge bk://bk.arm.linux.org.uk/linux-2.5-serial
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1165.1.1, 2003-04-29 15:46:23-07:00, torvalds@home.transmeta.com
Merge bk://bk.arm.linux.org.uk/linux-2.5-pcmcia
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1175, 2003-04-29 15:32:01-07:00, joe@perches.com
[PATCH] USB: fix up usb.h's dbg macro to take up less space
ChangeSet@1.1174, 2003-04-29 15:31:38-07:00, joe@perches.com
[PATCH] USB: fix up usb_serial.h's dbg macro to take up less space
ChangeSet@1.1173, 2003-04-29 15:31:17-07:00, joe@perches.com
[PATCH] USB: fix up usbnet's macros for older compilers
ChangeSet@1.1172, 2003-04-29 15:30:55-07:00, david-b@pacbell.net
[PATCH] USB: usbnet, config changes for CDC Ether
This patch changes how usbnet and CDC Ether get configured,
switching to the newer implementation with that CDC model
(using a "minidriver" for "usbnet").
- Removes "cdc-ether" from Kconfig and Makefile.
Once everything flies, "cdc-ether.c" can be
removed from the kernel.
- Makes all the "minidriver" options in "usbnet"
explicit in Kconfig, defaulting to "y" for most
cases. So folk expecting a CDC Ether option in
Kconfig will still have one, and during config
a list of hardware (cables, PDAs, etc) using the
"usbnet" driver is now available. (It's possible
to save a few pages of code by configuring out
drivers that use custom framing.)
- Since now it's possible to create broken configs,
this checks for them. The two basic errors being
configuring "usbnet" with no minidrivers, and
needing to blacklist Zaurus in CDC-only configs.
- Zaurus shouldn't do full CDC style init, since it
doesn't uniquify the Ethernet address it reports;
and it still shouldn't come up as an "eth%d" link.
The CDC support is still "experimental", since I want
to see a few interop reports for commercial products
before changing that.
ChangeSet@1.1171, 2003-04-29 15:30:31-07:00, stern@rowland.harvard.edu
[PATCH] USB: Minor patch for uhci-hcd.c
ChangeSet@1.1170, 2003-04-29 15:12:04-07:00, greg@kroah.com
USB: create usb_init_urb() for those people who like to live dangerously (like the bluetooth stack.)
ChangeSet@1.1169, 2003-04-29 15:06:55-07:00, greg@kroah.com
[PATCH] USB: fix CHECKER found bug in the keyspan.c driver
ChangeSet@1.1168, 2003-04-29 15:06:34-07:00, greg@kroah.com
[PATCH] USB: fix CHECKER found bug in the ipaq.c driver
ChangeSet@1.1167, 2003-04-29 15:06:12-07:00, greg@kroah.com
[PATCH] USB: fix CHECKER found bug in the io_edgeport.c driver
ChangeSet@1.1166, 2003-04-29 15:05:50-07:00, greg@kroah.com
[PATCH] USB: fix CHECKER found bug in the empeg.c driver
ChangeSet@1.1155.1.4, 2003-04-29 08:56:41-07:00, hch@lst.de
[PATCH] update dcache documentation
Update the dcache section in Documentation/filesystems/Locking to match
reality. Note that there's other parts of this file that are badly out
of date - I'll look into it later.
ChangeSet@1.1155.1.3, 2003-04-29 08:56:33-07:00, hch@lst.de
[PATCH] fix devfs_register_tape stub
this fixes a harmless but annoying warning when compiling one of the
tape drivers without devfs.
ChangeSet@1.1155.3.1, 2003-04-29 15:09:32+01:00, alex_williamson@com.rmk.(none)
[PATCH] 8250_pci include offset in iomap_base
This one-liner is required for PCI serial ports that have multiple
MMIO ports off a single PCI BAR. Calls to request_mem_resource() fail
after the first one otherwise. Patch against 2.5.67. Thanks,
ChangeSet@1.1155.2.1, 2003-04-29 03:33:28-07:00, mzyngier@freesurf.fr
[PATCH] EISA/sysfs update
The included patch cleans up the EISA code :
- Documentation update,
- Remove i386 EISA ID reservation (handled in the generic code),
- Add some preliminary support for EISA-like VLB cards (Adaptec 287x),
- Add some stricter dependancies for EISA_VIRTUAL_ROOT
- Preliminary support for EISA DMA,
- Much more conservative probing,
- EISA IDs list update (Compaq stuff).
ChangeSet@1.1155.1.1, 2003-04-29 02:41:05-07:00, davem@kernel.bkbits.net
Merge davem@nuts.ninka.net:/home/davem/src/BK/net-2.5
into kernel.bkbits.net:/home/davem/net-2.5
ChangeSet@1.1139.3.13, 2003-04-29 03:19:06-07:00, davem@nuts.ninka.net
[IPV6]: Kill unused vars in mcast procfs code.
ChangeSet@1.1139.3.12, 2003-04-29 02:37:14-07:00, shemminger@osdl.org
[BRIDGE}: More user hz conversions.
ChangeSet@1.1139.3.11, 2003-04-29 02:36:09-07:00, shemminger@osdl.org
[BRIDGE]: Inline and _rcu change.
* Need _rcu on the list_for_each_entry in br_get_port because called in
read path for some ioctls
* Move two small functions is_root_bridge and is_designated_port into
inlines because they are so short.
ChangeSet@1.1139.3.10, 2003-04-29 02:34:32-07:00, shemminger@osdl.org
[NETFILTER]: Use Read Copy Update.
ChangeSet@1.1139.3.9, 2003-04-29 02:33:09-07:00, bdschuym@pandora.be
[BRIDGE]: Always set BRNF_BRIDGED mask when bridging.
ChangeSet@1.1139.3.8, 2003-04-29 02:32:00-07:00, shemminger@osdl.org
[BRIDGE]: Use C99 initializers for netfilter bridge.
ChangeSet@1.1139.3.7, 2003-04-29 02:30:58-07:00, scole@zianet.com
[NET]: Spelling fixes for net/
ChangeSet@1.1128.1.21, 2003-04-29 06:06:37-03:00, acme@conectiva.com.br
o net/socket: return -EAFNOSUPPORT if net_family_get fails at sock_create and sys_accept
Thanks to Rusty for spotting this one, if the net family module is not there
anymore (or is going away at that time) it is not supported, not busy.
ChangeSet@1.1128.1.20, 2003-04-29 05:53:59-03:00, acme@conectiva.com.br
o af_pppox: return -EPROTONOSUPPORT if try_module_get fails at pppox_create
Thanks to Rusty for spotting this one, if the protocol module is not there
anymore (or is going away at that time) it is not supported, not busy.
ChangeSet@1.1164, 2003-04-29 00:32:23-07:00, greg@kroah.com
driver core: removed drivers/base/fs/*, drivers/base/intf.c and drivers/base/hotplug.c
These files are no longer needed due to class changes.
ChangeSet@1.1163, 2003-04-29 00:26:59-07:00, greg@kroah.com
driver core: fix up the pcmcia code to work with the new class changes.
This isn't the optimal fix, but things still work properly for me with
my hardware and this patch.
Dominik Brodowski has stated he will be fixing up this code a lot more
after the class changes are in the main tree.
ChangeSet@1.1162, 2003-04-29 00:12:08-07:00, greg@kroah.com
driver core: fix up scsi code to compile due to the class changes.
Yes, this patch is not logically correct, in that the scsi-host class
no longer works, but Mike Anderson has a patch that will be submitted
that fixes all of these problems.
ChangeSet@1.1161, 2003-04-28 23:51:52-07:00, greg@kroah.com
driver core: fix up tty code to work with the new class changes.
Note, tty_class will be flushed out in the future, this is just to
get things building again properly.
ChangeSet@1.1160, 2003-04-28 23:50:28-07:00, greg@kroah.com
driver core: fix up cpufreq code to work with new class changes.
ChangeSet@1.1159, 2003-04-28 23:32:36-07:00, greg@kroah.com
driver core: fix up the input_class logic due to the class changes.
ChangeSet@1.1158, 2003-04-28 23:16:45-07:00, greg@kroah.com
driver core: fix up cpu.c, memblk.c, and node.c due to the class changes
ChangeSet@1.1157, 2003-04-28 23:05:37-07:00, greg@kroah.com
driver core: rework driver class structures and logic
Removes the device_class, devclass_attribute, and device_interface structures
and replaces them with class, class_device, and class_interface structures.
This allows us to have multiple class_device structures per device structures
which mirrors the ways things really are within the kernel. It also allows
class_device structures to be created later than struct devices as they
are naturally created much later in the initialization process of a device.
ChangeSet@1.1128.1.19, 2003-04-29 02:55:39-03:00, acme@conectiva.com.br
o af_pppox: create module infrastructure for protocol modules
With this the pppox module is protected by the networking core and
the pppox "core" protects modules for specific pppox protocols (pppoe,
for instance), while doing it removed some not needed struct sock
member initializations in pppoe_create that are done by sock_init_data.
ChangeSet@1.1156, 2003-04-28 22:27:58-07:00, greg@kroah.com
kobject: kobj_lock needs to be grabed using spinlock_irq
This is because some subsystems (cough, usb...) can grab a kobject from irq context.
This lock can be completely removed once the sysfs_init() code is cleaned up.
Patch originally by Andrew Morton.
ChangeSet@1.1128.1.18, 2003-04-29 00:52:38-03:00, acme@conectiva.com.br
o pppox: simple code cleanups
. rename proto to pppox_protos, even being static this is too generic a name
. use rc as the name for result variables, just for consistency with other
net sources
This is in preparation for having a proper net family module level modules
infrastructure, with the top level (af_pppox) doing the module refcounting
before calling any functions registered by the lower level protocol modules
(in this case just PPPOE for now).
ChangeSet@1.1155, 2003-04-28 20:01:29-07:00, torvalds@home.transmeta.com
DRI CVS merge: memory barrier updates
ChangeSet@1.1154, 2003-04-28 20:01:03-07:00, torvalds@home.transmeta.com
DRI CVS merge: make sure the device is properly initialized
before opening it.
ChangeSet@1.1153, 2003-04-28 20:00:26-07:00, torvalds@home.transmeta.com
DRI CVS merge: only free pages when we _have_ pages to free.
Cleanups.
ChangeSet@1.1152, 2003-04-28 19:59:53-07:00, torvalds@home.transmeta.com
DRI CVS merge: make sure to clean up irq and DMA on final close.
ChangeSet@1.1151, 2003-04-28 19:57:50-07:00, torvalds@home.transmeta.com
Remove old (disabled) debugging code.
ChangeSet@1.1150, 2003-04-28 19:57:08-07:00, torvalds@home.transmeta.com
Previous DRI CVS merge improperly removed some sparc-only
support. Add it back in now that DRI is synched up again.
ChangeSet@1.1128.1.17, 2003-04-28 23:56:31-03:00, acme@conectiva.com.br
o ipx: several simple cleanups
. use switch/case alignment at the same column,
more common in the kernel sources
. remove outdated module refcounting comments
. have just one exit (return) in the ioctl functions
. use 'rc' for return variables, not ret or err, for
consistency on naming.
ChangeSet@1.1149, 2003-04-28 19:54:58-07:00, torvalds@home.transmeta.com
DRI CVS merge: move more gamma-only functions away from
generic dri files and into gamma driver files.
ChangeSet@1.1146, 2003-04-28 23:45:13+01:00, rmk@flint.arm.linux.org.uk
[ARM] Update mach-types to latest version.
ChangeSet@1.1145, 2003-04-28 23:06:46+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix elf_fpregset_t
This is a fix from eons ago, which apparantly has been in the old
Rebel.com netwinder CVS for several years, and has never been
submitted upstream.
This fix allows FP registers to be correctly written to ELF core
files, as well as preventing corruption of other parts of ELF core
files caused by data on the kernel stack being overwritten.
ChangeSet@1.1144, 2003-04-28 22:56:31+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix a collection of missed changes from cache API changes.
ChangeSet@1.1143, 2003-04-28 22:15:23+01:00, rmk@flint.arm.linux.org.uk
[ARM] Switch to SVC mode using read/modify/write.
ChangeSet@1.1142, 2003-04-28 22:01:32+01:00, rmk@flint.arm.linux.org.uk
[ARM] Remove unused msleep() function in h3600.c
ChangeSet@1.1141, 2003-04-28 21:31:10+01:00, rmk@flint.arm.linux.org.uk
[ARM] Don't allow FPE modules to be built as a module.
ChangeSet@1.1140, 2003-04-28 21:23:19+01:00, rmk@flint.arm.linux.org.uk
Merge flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-nwfpe
into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk
ChangeSet@1.1128.1.16, 2003-04-28 16:05:05-03:00, acme@conectiva.com.br
o af_decnet: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.15, 2003-04-28 13:28:08-03:00, acme@conectiva.com.br
o net: save some more bytes in the kernel image moving global zero inits to .bss
ChangeSet@1.1128.1.14, 2003-04-28 13:22:38-03:00, acme@conectiva.com.br
o net: several C99 struct init style conversions and cleanups
ChangeSet@1.1128.1.13, 2003-04-28 11:13:08-03:00, acme@conectiva.com.br
o rose/rose_dev: use SET_MODULE_OWNER, removing calls to MOD_{INC,DEC}_USE_COUNT
ChangeSet@1.1128.1.12, 2003-04-28 11:11:54-03:00, acme@conectiva.com.br
o netrom/nr_dev: use SET_MODULE_OWNER, removing calls to MOD_{INC,DEC}_USE_COUNT
ChangeSet@1.1128.1.11, 2003-04-28 11:10:11-03:00, acme@conectiva.com.br
o af_x25: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.10, 2003-04-28 11:07:45-03:00, acme@conectiva.com.br
o af_wanpipe: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.9, 2003-04-28 11:05:15-03:00, acme@conectiva.com.br
o af_rose: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.8, 2003-04-28 11:01:16-03:00, acme@conectiva.com.br
o af_packet: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.7, 2003-04-28 10:58:48-03:00, acme@conectiva.com.br
o af_netrom: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.6, 2003-04-28 10:55:26-03:00, acme@conectiva.com.br
o af_key: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.5, 2003-04-28 10:46:43-03:00, acme@conectiva.com.br
o af_irda: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.4, 2003-04-28 10:39:41-03:00, acme@conectiva.com.br
o af_econet: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1128.1.3, 2003-04-28 10:37:20-03:00, acme@conectiva.com.br
o af_ax25: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1138, 2003-04-28 02:36:08-07:00, davem@nuts.ninka.net
[NETFILTER]: Use proper size_t printf format in ip6t_LOG.c
ChangeSet@1.1137, 2003-04-28 02:34:23-07:00, davem@nuts.ninka.net
[NETFILTER]: Kill unused var in nf_reinject.
ChangeSet@1.1136, 2003-04-28 02:28:47-07:00, rusty@rustcorp.com.au
[NETFILTER]: Add owner field to nf_hook_ops.
Adds an owner field to nf_hook_ops, and use it to hold the hook in place
for queued packets.
ChangeSet@1.1122.5.1, 2003-04-28 02:24:33-07:00, davem@nuts.ninka.net
[SPARC64]: Update defconfig.
ChangeSet@1.889.310.24, 2003-04-28 10:19:30+01:00, rmk@flint.arm.linux.org.uk
[ARM] Clean up nwfpe makefile.
ChangeSet@1.1135, 2003-04-28 01:44:24-07:00, davem@nuts.ninka.net
[NETFILTER]: Make ip_conntrack_core.c use correct printf format for size_t.
ChangeSet@1.1134, 2003-04-28 01:43:06-07:00, davem@nuts.ninka.net
[DECNET]: Kill warning with gcc-3.x in dn_route.c
ChangeSet@1.1133, 2003-04-28 01:41:57-07:00, davem@nuts.ninka.net
[EBTABLES]: Make ebt_vlan.c use correct printf format for size_t.
ChangeSet@1.1118.1.78, 2003-04-27 21:51:21-07:00, maxk@qualcomm.com
[Bluetooth] Initialize ->owner field of the RFCOMM tty driver.
In order to fix all MOD_INC/DECs in the RFCOMM code we need __module_get().
ChangeSet@1.1118.1.77, 2003-04-27 21:43:10-07:00, maxk@qualcomm.com
[Bluetooth] Initialize net_proto_family->owner field. This covers only HCI sockets.
Other protocols cannot be fixes at this point because current net_proto_family
code does not support "family owner != socket owner" case.
ChangeSet@1.1122.3.18, 2003-04-28 00:42:37-04:00, jgarzik@redhat.com
[netdrvr ixgb] more cleanups
- support new 2.5 irqreturn_t
- s/usec_delay/udelay/
- remove two stored-but-never-used members of struct ixgb_hw
- read PCI vendor/device ids from struct pci_dev, not h/w
- remove some unused wrappers from ixgb_osdep.h
ChangeSet@1.1118.1.76, 2003-04-27 21:33:46-07:00, maxk@qualcomm.com
[Bluetooth] USB drivers cannot call usb_unlink_urb() under spin lock.
ChangeSet@1.1122.3.17, 2003-04-28 00:22:21-04:00, jgarzik@redhat.com
[netdrvr ixgb] use standard kernel u8/u16/u32 types
ChangeSet@1.1122.3.16, 2003-04-28 00:12:23-04:00, jgarzik@redhat.com
[netdrvr ixgb] Lindent, then fix up obvious indent uglies by hand
ChangeSet@1.1122.3.15, 2003-04-28 00:05:23-04:00, ganesh.venkatesan@intel.com
[netdrvr ixgb] add new driver for Intel's 10 gig ethernet
ChangeSet@1.1122.3.14, 2003-04-27 23:54:37-04:00, scott.feldman@intel.com
[netdrvr e1000] add a bit of source cross-version compat
* Wrap TSO support with NETIF_F_TSO to keep same driver
source between 2.4 and 2.5.
ChangeSet@1.1122.3.13, 2003-04-27 23:53:00-04:00, scott.feldman@intel.com
[netdrvr e1000] mark e1000 NAPI feature not-experimental
ChangeSet@1.1122.2.4, 2003-04-27 23:36:38-04:00, akpm@digeo.com
net driver cleanup, volume 7
100% irqreturn_t cleanups
Affected drivers: 3c523, 527, 68360enet, 7990, a2065, am79c961a,
appletalk/{ltpc,cops}, ariadne, {lotsa}lance, au1000_eth, eth16i,
ewrk3, gt96100eth, hamradio/several, ibmlana, ioc3-eth, *-skeleton,
lasi_82596, mac89x0, pcmcia/3c574_cs, rrunner, sb1000, sb1250-mac,
sgiseeq, sk_g16, sk_mca, skfddi, sonic, sun3_82586, tc35815,
tokenring/several, wan/several
ChangeSet@1.1128.1.2, 2003-04-27 23:18:17-03:00, acme@conectiva.com.br
o wireless: make the ioctl tables more resilient to errors using C99 style init
ChangeSet@1.1128.1.1, 2003-04-27 23:06:26-03:00, acme@conectiva.com.br
o af_unix: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1130, 2003-04-27 19:03:49-07:00, laforge@netfilter.org
[NETFILTER]: Makefile and build fixes.
ChangeSet@1.1127.1.4, 2003-04-27 18:49:20-07:00, kaber@trash.net
[NETFILTER]: Multiple ipt_REJECT fixes.
- fix tcp-rst routing
- fix memory leak
- remove unecessary "struct in_device" declaration
- remove RTO_CONN
ChangeSet@1.1127.1.3, 2003-04-27 18:42:39-07:00, mulix@mulix.org
[NETFILTER]: ip_queue memory leaks
ChangeSet@1.1127.1.2, 2003-04-27 18:41:03-07:00, bdschuym@pandora.be
[NETFILTER]: Add ipt_physdev extension.
ChangeSet@1.1122.3.11, 2003-04-27 17:47:54-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] hd98 compile fixes
hd98 had missed a lot of required block device patches (e.g.
it used BLK_DEFAULT_QUEUE and that had been gone for ~ half a year).
Reproduced the changes done to hd.c.
ChangeSet@1.1122.3.10, 2003-04-27 17:47:46-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ataflop.c cleanup
Somewhat cleaned up, sanitized the module init/exit code (BTW,
built-in case was b0rken for quite a while - somebody forgot to add
initcall there; converted the bugger to module_init/module_exit)
ChangeSet@1.1122.3.9, 2003-04-27 17:47:38-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] bdget_disk()
New helper - bdget_disk(gendisk, partition)
invalidate_device() replaced with invalidate_partition(disk, part)
ChangeSet@1.1122.3.8, 2003-04-27 17:47:29-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] blkmtd init cleanup
Obvious cleanup of the code in init_blkmtd(). Killed code duplication,
replaced opening underlying block device manually with use of appropriate
helpers.
ChangeSet@1.1122.3.7, 2003-04-27 17:47:21-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] open_by_devnum()
New helper - open_by_devnum(). Opens block_device by device number;
for use in situations when we really have nothing better than dev_t (i.e.
had received it from stupid userland API).
ChangeSet@1.1122.3.6, 2003-04-27 17:47:14-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] pin_fs/release_fs
A couple of helpers - simple_pin_fs() and simple_release_fs().
My fault - that code should've been put into libfs.c from the very
beginning. As it is, it got copied all over the place (binfmt_misc,
capifs, usbfs, usbdevfs, rpc_pipefs).
Taken to libfs.c and cleaned up.
ChangeSet@1.1122.3.5, 2003-04-27 17:47:05-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] simple_fill_super()
New libfs.c helper - simple_fill_super(). Abstracted from
nfsd/nfsctl.c, couple of filesystems converted to it (nfsctl, binfmt_misc).
Function takes an array of triples (name, file_operations, mode),
superblock and value for its ->s_magic. It acts as fill_super() - populates
superblock or fails. We get a ramfs-style flat tree - root directory and
a bunch of files in it.
That animal allows to put together a simple filesystem without
touching any directory-related stuff - now it's as easy as implementing
file_operations for files you want to have and telling what to call them.
ChangeSet@1.1118.1.75, 2003-04-27 17:18:09-07:00, maxk@qualcomm.com
[Bluetooth] Fix race condition in RFCOMM session and dcl scheduler.
This fixes random RFCOMM freezes reported by some people.
ChangeSet@1.1118.43.18, 2003-04-28 01:17:22+01:00, rmk@flint.arm.linux.org.uk
[ARM] set_pgd is confusing; rename it switch_mm
set_pgd implies that we're setting a pgd entry. We aren't; we're
switching the MMU page table pointer. Call it switch_mm instead.
ChangeSet@1.1118.1.74, 2003-04-27 17:08:49-07:00, maxk@qualcomm.com
[Bluetooth] Improved RFCOMM TTY TX buffer management.
Don't buffer more data than we have credits for.
Patch from David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1118.43.17, 2003-04-28 00:56:26+01:00, rmk@flint.arm.linux.org.uk
[ARM] Remove check_bugs()
check_bugs() has never been used to detect buggy ARM CPUs. Therefore
is no point in passing it to the per-cpu support code.
ChangeSet@1.1118.43.16, 2003-04-28 00:47:44+01:00, rmk@flint.arm.linux.org.uk
[ARM] Part 2 in the cache API changes.
This is the new API; we now have methods for handling DMA which are
separate from those handling the TLB consistency issues, which are
in turn separate from the methods handling the cache coherency
issues.
Implementations are, however, free to alias these methods internally.
ChangeSet@1.1122.3.3, 2003-04-27 15:37:34-07:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] remove duplicated defines from ide.h
[trivia] Remove duplicated defines of PRD_BYTES and PRD_ENTRIES.
ChangeSet@1.1122.3.2, 2003-04-27 15:37:23-07:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] fix compilation of taskfile IO
Fix compilation of CONFIG_IDE_TASKFILE_IO, but don't expose this config
option yet.
ChangeSet@1.1122.3.1, 2003-04-27 15:37:14-07:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] fix DMA for taskfile IO
Fix handling of read/write DMA in do_rw_taskfile(),
it was broken because default return value is ide_stopped.
ChangeSet@1.1118.43.15, 2003-04-27 20:28:25+01:00, rmk@flint.arm.linux.org.uk
[ARM] Clean up ARM cache handling interfaces (part 1)
This starts to move the ARM cache handling interface towards a
purpose-defined rather than functionality-defined interface.
This is necessary so we are able to support a wide range of ARM
CPUs.
ChangeSet@1.1122.2.3, 2003-04-27 13:34:53-04:00, romieu@fr.zoreil.com
[wan dscc4] irqreturn_t update
ChangeSet@1.1122.2.2, 2003-04-27 13:32:58-04:00, hch@lst.de
[netdrvr pcmcia] switch drivers to using pcmcia_register_driver
Affected drivers: 3c574_cs, 3c589_cs, axnet_cs, com20020_cs,
fmvj18x_cs, ibmtr_cs, nmclan_cs, smc91c92_cs, xir2ps_cs
ChangeSet@1.1122.2.1, 2003-04-27 13:30:52-04:00, anton@samba.org
[netdrvr 8139cp] enable MWI via pci_set_mwi, rather than manually
ChangeSet@1.1118.43.14, 2003-04-27 17:51:24+01:00, rmk@flint.arm.linux.org.uk
[ARM] Inline PMD entry cache handling
The common case is building a kernel for one CPU type, and we are
able to allow GCC to optimise any the PMD entry cache handling
assembly which will never be used.
ChangeSet@1.1118.43.13, 2003-04-27 17:30:54+01:00, rmk@flint.arm.linux.org.uk
[ARM] Make tlb_start_vma() flush the cache
ChangeSet@1.1118.43.12, 2003-04-27 17:24:23+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix includes
fault-common.c included unnecessary headers.
mach-integrator.c needed list.h included.
ChangeSet@1.1122.1.1, 2003-04-27 09:12:39-07:00, paulus@samba.org
[PATCH] drivers/macintosh irq handler type
This patch changes the interrupt handler routines in four of the
macintosh-specific drivers to return an irqreturn_t value.
ChangeSet@1.1128, 2003-04-27 13:12:20-03:00, acme@conectiva.com.br
o af_llc: add missing include module.h
ChangeSet@1.1118.43.11, 2003-04-27 17:07:00+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix integrator cpufreq build errors
ChangeSet@1.1127, 2003-04-27 12:59:15-03:00, acme@conectiva.com.br
o appletalk: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1118.43.10, 2003-04-27 16:57:01+01:00, rmk@flint.arm.linux.org.uk
[ARM] Ensure gcc does not assume asm() is conditional.
Prevent all gcc's from assuming that assembly within asm() may be
conditional.
ChangeSet@1.1118.43.9, 2003-04-27 16:41:57+01:00, rmk@flint.arm.linux.org.uk
[ARM] lock up() functions should be memory barriers.
ChangeSet@1.1118.43.8, 2003-04-27 16:36:49+01:00, rmk@flint.arm.linux.org.uk
[ARM] Provide more early command line parsing.
We need to parse the command line arguments not only for the memory
parameters, but also CPU cache policies. Rather than extending the
early parsing in arch/arm/kernel/setup.c, we make this a generic
feature. The parameters and their parsing function can now be
placed along side the code which makes use of the parsed information.
ChangeSet@1.1126, 2003-04-27 12:33:16-03:00, acme@conectiva.com.br
o af_llc: initialize ->owner in llc_ui_family_ops
The previous changeset for llc was enough when the BSD sockets interface
for AF_LLC was not selected, but this changeset is needed when it is
selected.
ChangeSet@1.1125, 2003-04-27 12:04:25-03:00, acme@conectiva.com.br
o llc: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net
protocol families, its just a matter of setting the ->owner field in the
registered struct net_proto_family to THIS_MODULE.
ChangeSet@1.1118.43.7, 2003-04-27 15:40:55+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix another case of looking at task_struct instead of thread_info
ChangeSet@1.1118.43.6, 2003-04-27 15:32:16+01:00, rmk@flint.arm.linux.org.uk
[ARM] Bypass cache cleaning if cache/mmu was disabled.
ChangeSet@1.1118.43.5, 2003-04-27 15:23:25+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix two makefile problems
Saner selection of architecture build flags (for Xscale)
Make asm-offsets.s depend on the selected platform
ChangeSet@1.1118.43.4, 2003-04-27 15:06:59+01:00, alexander.schulz@com.rmk.(none)
[ARM PATCH] 1518/1: Shark: cyberpro broken by machine_is_netwinder
Patch from Alexander Schulz
I cannot compile the file cyber2000fb.c because of an undifined
reference to machine_is_netwinder(). This patch makes it compile again.
ChangeSet@1.1124, 2003-04-27 11:03:43-03:00, acme@conectiva.com.br
o ipx: remove MOD_{INC,DEC}_USE_COUNT
Now the core networking infrastructure will (finally) do that for the net protocol
families, its just a matter of setting the ->owner field in the registered struct
net_proto_family to THIS_MODULE.
ChangeSet@1.1118.43.3, 2003-04-27 15:02:51+01:00, alexander.schulz@com.rmk.(none)
[ARM PATCH] 1517/1: Shark: new defconfig
Patch from Alexander Schulz
This updates the defconfig for the Shark
ChangeSet@1.1118.43.2, 2003-04-27 14:58:17+01:00, eli.carter@com.rmk.(none)
[ARM PATCH] 1514/1: iq80321 MTD C99 fix
Patch from Eli Carter
# Tue Apr 22 14:28:13 CDT 2003 ejc@rnd-linux-c84
# e45-iq80321-mtd-c99-fix
#
# I didn't test my C99 fix for the iq80321 MTD mapping. "If you didn't test it,
# it's broken." This fixes that (embarrasing) blunder.
#
# Diffed against linux-2.5.68-rmk1+1513
#
# drivers/mtd/maps/iq80321.c | 22 +++++++++++-----------
# 1 files changed, 11 insertions(+), 11 deletions(-)
#
ChangeSet@1.1118.43.1, 2003-04-27 14:55:02+01:00, eli.carter@com.rmk.(none)
[ARM PATCH] 1513/1: iq80310 fix missing header
Patch from Eli Carter
# Tue Apr 22 10:26:15 CDT 2003 ejc@rnd-linux-c84
# e42-fix-missing-iop-header
#
# Add in the missing iop310-irq.h header file.
#
# Diffed against linux-2.5.59-rmk1-ec0
# Applies cleanly to 2.5.67-rmk1, 2.5.68-rmk1
#
# include/asm-arm/arch-iop3xx/iop310-irqs.h | 80 ++++++++++++++++++++++++++++++
# 1 files changed, 80 insertions(+)
#
ChangeSet@1.1123, 2003-04-27 10:34:17-03:00, acme@conectiva.com.br
o net/socket: make sys_accept bump the net proto family module usage count
Thanks to Max Krasnyansky for spotting this.
ChangeSet@1.1118.41.6, 2003-04-27 22:41:55+10:00, benh@kernel.crashing.org
PPC32: Handle CPUs that have extra BAT (block address translation) registers
ChangeSet@1.1118.41.5, 2003-04-27 22:18:18+10:00, paulus@samba.org
PPC32: Reduce __MAX_NDELAY a little to avoid compiler warnings.
ChangeSet@1.1118.41.4, 2003-04-27 21:56:57+10:00, paulus@samba.org
PPC32: Change interrupt handlers to return irqreturn_t.
ChangeSet@1.1121, 2003-04-27 00:25:42-05:00, stevef@smfhome1.austin.rr.com
Fix delete of files with readonly attribute. Reflect setting of
readonly dos attribute in mode when server does not support
CIFS Unix extensions. Fix abbreviated readdir to servers that
do support CIFS Unix extensions.
ChangeSet@1.1118.41.2, 2003-04-26 21:16:42-07:00, willy@debian.org
[PATCH] fix iomem_resource
Every 64-bit architecture changes the end of iomem_resources. Some more
gracefully than others. This patch does away with all that by making
it end at ~0UL by default.
ChangeSet@1.1118.41.1, 2003-04-26 18:20:47-07:00, torvalds@home.transmeta.com
scsi.c needs <linux/interrupt.h>. Somebody was a bit over-eager
at cleanups.
ChangeSet@1.1118.40.1, 2003-04-26 16:12:29-07:00, torvalds@home.transmeta.com
Automerge
ChangeSet@1.1118.23.50, 2003-04-26 15:52:43-07:00, jmorris@intercode.com.au
[IPSEC]: allow only tunnel mode in xfrm4_tunnels.
ChangeSet@1.1118.39.1, 2003-04-26 23:21:30+02:00, oliver@oenone.homelinux.org
- add DC395 SCSI driver
ChangeSet@1.1118.1.71, 2003-04-26 15:49:21-05:00, jejb@raven.il.steeleye.com
Fix mismerge in megaraid.c
ChangeSet@1.1118.23.49, 2003-04-26 11:43:43-07:00, torvalds@home.transmeta.com
Avoid warning: print out hw_status_page as the pointer it now is.
ChangeSet@1.1118.23.48, 2003-04-26 11:43:07-07:00, torvalds@home.transmeta.com
Fix up some mixing of ramdisk/initrd. They have nothing in common,
but the build was confused by the fact that they did share some files.
Move INITRD code from do_mounts_rd.c to new file do_mounts_initrd.c.
ChangeSet@1.1118.1.70, 2003-04-26 13:36:34-05:00, jejb@raven.il.steeleye.com
Merge
ChangeSet@1.1118.38.1, 2003-04-26 13:22:12-05:00, hch@lst.de
[PATCH] de-uglify scsi.c
It's the last file of the scsi core that needed to be converted from
the old scsi style.
ChangeSet@1.1118.1.69, 2003-04-26 13:18:07-05:00, patmans@us.ibm.com
[PATCH] scsi-misc-2.5 remove scsi_scan.c EVPD code
Patch against current scsi-misc-2.5 tree.
Remove the scsi EVPD code.
Set the sysfs name to the form "SCSI scsi-type".
ChangeSet@1.1118.37.1, 2003-04-26 17:17:25+01:00, hch@de.rmk.(none)
[PCMCIA] consolidate cs_error()
I don't think having a copy of this in about every pcmcia driver is
a good idea.
ChangeSet@1.1118.1.68, 2003-04-26 09:42:12-05:00, jejb@raven.il.steeleye.com
Merge akpm/jejb changes
ChangeSet@1.1118.36.1, 2003-04-25 23:03:27-07:00, zaitcev@redhat.com
[SPARC]: Openprom drivers needs linux/fs.h
ChangeSet@1.1118.35.10, 2003-04-25 22:54:45-07:00, davem@nuts.ninka.net
[BRIDGE]: br_if.c needs linux/init.h
ChangeSet@1.1118.35.9, 2003-04-25 22:24:16-07:00, shemminger@osdl.org
[BRIDGE]: Use RCU for port table.
ChangeSet@1.1118.35.8, 2003-04-25 22:20:12-07:00, shemminger@osdl.org
[BRIDGE]: Use list macros for ports.
ChangeSet@1.1118.35.7, 2003-04-25 22:18:59-07:00, shemminger@osdl.org
[BRIDGE]: Possible race with timer on shutdown.
ChangeSet@1.1118.35.6, 2003-04-25 22:17:14-07:00, shemminger@osdl.org
[BRIDGE]: Get write lock in config PDU processing.
ChangeSet@1.1118.35.5, 2003-04-25 22:13:47-07:00, davem@nuts.ninka.net
[IPV6]: Export in6_dev_finish_destroy.
ChangeSet@1.1118.35.4, 2003-04-25 21:20:24-07:00, davem@nuts.ninka.net
[SCTP]: ICMP6 per-device changes for sctp.
ChangeSet@1.1118.35.3, 2003-04-25 21:06:47-07:00, rddunlap@osdl.org
[IPV6]: Per-interfave icmpv6 statistics support.
ChangeSet@1.1118.35.2, 2003-04-25 21:02:11-07:00, yoshfuji@linux-ipv6.org
[IPV6]: Per-interface statistics infrastructure.
ChangeSet@1.1118.23.44, 2003-04-26 00:01:49-04:00, Valdis.Kletnieks@vt.edu
[netdrvr typhoon] s/#if/#ifdef/ for a CONFIG_ var
ChangeSet@1.1118.35.1, 2003-04-25 20:59:35-07:00, yoshfuji@linux-ipv6.org
[IPV6]: SNMP6 clean-up.
ChangeSet@1.1118.33.40, 2003-04-25 23:59:25-04:00, Valdis.Kletnieks@vt.edu
cpp cleanups: use KERNEL_VERSION macro from linux/version.h
Updated ncr53c8xx and sym53c8xx scsi drivers.
ChangeSet@1.1118.33.39, 2003-04-25 23:56:32-04:00, Valdis.Kletnieks@vt.edu
cpp cleanups for ia32/io_apic.c, sound/oss/trident.c
ChangeSet@1.1118.23.43, 2003-04-25 23:32:18-04:00, edward_peng@dlink.com.tw
[netdrvr sundance] bug fixes, VLAN support
- Fix tx bugs in big-endian machines
- Remove unused max_interrupt_work module parameter, the new
NAPI-like rx scheme doesn't need it.
- Remove redundancy get_stats() in intr_handler(), those
I/O access could affect performance in ARM-based system
- Add Linux software VLAN support
- Fix bug of custom mac address
(StationAddr register only accept word write)
ChangeSet@1.1118.33.38, 2003-04-25 23:22:32-04:00, jgarzik@redhat.com
[hw_random] fix bug, bump version
Fix ugly bug in read(2) path for odd buffer sizes.
Noticed by Joseph Chan @ Via.
Bump version to 1.0.0.
ChangeSet@1.1118.33.37, 2003-04-25 23:16:14-04:00, pixi@burble.org
[quota] provide no-op sync_dquots_dev, one .config case wants it
ChangeSet@1.1118.23.42, 2003-04-25 22:57:54-04:00, edward_peng@dlink.com.tw
[netdrvr via-rhine] fix promisc mode
I found a via-rhine bug, it can't receive BPDU (mac: 0180c2000000)
in promiscuous mode.
Fill all "1" in hash table to fix this problem in promiscuous mode.
(RCR remain 0x1c, write it as 0x1f don't work)
ChangeSet@1.1118.23.41, 2003-04-25 22:38:15-04:00, riel@redhat.com
[wireless airo] make end-of-array test more portable
FYI statsLabels[] is an array of char*, so the fix below
is pretty obvious.
ChangeSet@1.1118.33.36, 2003-04-25 21:41:02-04:00, jgarzik@redhat.com
s/#if/#ifdef/ for a few CONFIG_SMP tests in public headers
Headers touched: linux/interrupt.h, linux/sched.h, linux/timer.h
ChangeSet@1.1118.33.35, 2003-04-25 16:09:01-07:00, torvalds@penguin.transmeta.com
'hw_status_page' looks like a pointer, quacks like a pointer and
walks like a pointer. It _is_ a pointer. So make it one, and remove
a lot of silly casts.
ChangeSet@1.1118.33.34, 2003-04-25 15:58:02-07:00, torvalds@home.transmeta.com
Merge with DRI CVS tree: remove stale old context switching code and
DMA histogramming. Be more careful about DMA page-list allocations,
and remove old and broken (not SMP-safe, and unused) DRM read(), write()
and poll() support.
ChangeSet@1.1118.33.33, 2003-04-25 14:18:43-07:00, l.s.r@web.de
[PATCH] Remove unused function from fs/isofs/rock.c
find_rock_ridge_relocation() has been unused since 2.4.0-test11 -- time
to bury it.
Acked by Peter Anvin.
ChangeSet@1.1118.33.32, 2003-04-25 00:19:18-07:00, hunold@convergence.de
[PATCH] Fix mxb.c stack usage
This does the following:
- make initialization data for helper chipsets (saa7111 and saa7740)
static and with file scope
Additionally fixes:
- don't use irq driven i2c transfer when saa7740 is present (this screws
up the i2c bus and may hang the computer)
- add MODULE_DEVICE_TABLE to allow /sbin/hotplug to handle the device
ChangeSet@1.1118.33.31, 2003-04-24 22:59:36-07:00, akpm@digeo.com
[PATCH] jiffy type warning fixes
Fix various places which aren't using unsigned long for jiffies.
Also other warnings and compilation errors as encountered.
ChangeSet@1.1118.33.30, 2003-04-24 22:59:28-07:00, akpm@digeo.com
[PATCH] bttv warning fix
Fix a bttv compile warning
ChangeSet@1.1118.33.29, 2003-04-24 22:59:20-07:00, akpm@digeo.com
[PATCH] watchdog driver compile fixes
The header file cleanups bite. All these watchdog drivers need fs.h for
struct inode, struct file, etc.
ChangeSet@1.1118.33.28, 2003-04-24 22:59:11-07:00, akpm@digeo.com
[PATCH] parkbd.c jiffies fix
- jiffies is unsigned long
- don't zero-init BSS.
ChangeSet@1.1118.33.27, 2003-04-24 22:59:05-07:00, akpm@digeo.com
[PATCH] various irqreturn_t fixes
Basically a mop-up of missed bits. Also fix various warnings and compilation
errors.
ChangeSet@1.1118.33.26, 2003-04-24 22:58:56-07:00, akpm@digeo.com
[PATCH] CPU flags fixes
teach various drivers that the CPU flags require unsigned long
ChangeSet@1.1118.33.25, 2003-04-24 22:58:48-07:00, akpm@digeo.com
[PATCH] sound driver fixes
All these drivers have a return hidden in a macro and I missed the lot in the
first pass due to some config option not begin set.
ChangeSet@1.1118.33.24, 2003-04-24 22:58:39-07:00, akpm@digeo.com
[PATCH] irqs: scsi
Update SCSI drivers for the new IRQ API. Also fix warnings and compilation
errors as encountered.
ChangeSet@1.1118.33.23, 2003-04-24 22:58:29-07:00, akpm@digeo.com
[PATCH] irqs: char drivers
Fix up various char drivers for the IRQ API change. Also IDE, ISDN and i2o
bits. Fix various warnings and compilation errors.
ChangeSet@1.1118.33.22, 2003-04-24 22:58:21-07:00, akpm@digeo.com
[PATCH] irqs: drivers/block
Mop up various block and cdrom drivers. Also fix a bunch of warnings and
compilation failures.
ChangeSet@1.1118.33.21, 2003-04-24 22:58:13-07:00, akpm@digeo.com
[PATCH] irqs: ATM
Update ATM drivers to new IRQ API
ChangeSet@1.1118.33.20, 2003-04-24 22:58:04-07:00, akpm@digeo.com
[PATCH] Fix IRQ_NONE clash
Several scsi drivers are already using an IRQ_NONE. Rename that to
SCSI_IRQ_NONE.
ChangeSet@1.1118.33.19, 2003-04-24 22:42:51-07:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] fix mismatched access_ok() checks in sg_io()
I found this while doing bio_map_user() changes.
Acked by Jens.
ChangeSet@1.1118.33.18, 2003-04-24 22:42:43-07:00, axboe@suse.de
[PATCH] cleanup bio_map_user and helper
Bart did this patch, I changed it a bit. Basically it cleans the mapping
interface up a bit, and adds a little helper to set up the request from
the bio.
In addition, it fixes a long standing bug where bio_map_user() would
call blk_queue_bounce() without the direction bit being set, auch.
- Abstract out bio request preparation
- Have bio_map_user() set data direction (fixes bug where blk_queue_bounce()
is called without it set)
- Split bio_map_user() in two
ChangeSet@1.1118.33.17, 2003-04-24 22:41:11-07:00, hch@lst.de
[PATCH] use file->private_data in ide-tape
So we don't have to lookup the private data everytime.
ChangeSet@1.1118.33.16, 2003-04-24 22:41:01-07:00, hch@lst.de
[PATCH] kill <linux/wrapper.h>
Kill one user of mem_map_reserve/mem_map_unreserve I missed the
last time and it can go away.
ChangeSet@1.1118.33.15, 2003-04-24 22:39:58-07:00, anton@samba.org
[PATCH] ppc64 needs setup-bus.c
ChangeSet@1.1118.33.14, 2003-04-24 22:39:15-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ppc boot device selection cleanup
PPC logics for choice of default boot device number switched to
dev_t. Rationale: it belongs to userland; we notice partitions with
certain properties and choose one of them as the best candidate for
being a root fs; then we put the resulting device number into ROOT_DEV,
which has only one use - it's passed to mknod(2) to create a device node
on rootfs and allow mount(2) get us the final root.
IOW, all that code has nothing whatsoever with kernel internals
of any description - the value we are generating will be passed to
mknod(2) anyway. Switched to dev_t.
Note: that code should eventually be moved to early userland.
ChangeSet@1.1118.33.13, 2003-04-24 22:39:06-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] invalidate_device()/check_disk_change() fixes
* bogus calls of invalidate_buffers() gone from floppy_open()
* invalidate_buffers() killed.
* new helper - __invalidate_device(bdev, do_sync). invalidate_device()
is calling it.
* fixed races between floppy_open()/floppy_open and
floppy_open()/set_geometry():
a) floppy_open()/floppy_release() is done under a semaphore. That
closes the races between simultaneous open() on /dev/fd0foo and /dev/fd0bar.
b) pointer to struct block_device is kept as long as floppy is
opened (per-drive, non-NULL when number of openers is non-zero, does not
contribute to block_device refcount).
c) set_geometry() grabs the same semaphore and invalidates the
devices directly instead of messing with setting fake "it had changed"
and calling __check_disk_change().
* __check_disk_change() killed - no remaining callers
* full_check_disk_change() killed - ditto.
ChangeSet@1.1118.33.12, 2003-04-24 22:38:58-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] capifs cleanup
capifs switched to ramfs-style tree and cleaned up; it's the same
changes that had been done its prototype (devpts) + stuff needed to
deal with unload (devpts is non-modular and always internally mounted).
ChangeSet@1.1118.33.11, 2003-04-24 22:38:50-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] fbdev cleanup
fbdev.node converted from kdev_t to int - all of its users
have register_framebuffer() which sets .node to mk_kdev(FB_MAJOR, index)
already called and all of them start with applying minor(). IOW, what
they actually want is framebuffer number.
* type of ->node changed to int
* register_framebuffer() sets it to index instead of mk_kdev(...)
* users converted from minor(foo.node) to foo.node
* useless assignments (typically to NODEV) removed - we never
look at that field before register_framebuffer() overwrites it and thus
any assignments prior to register_framebuffer() call are dead code.
ChangeSet@1.1118.33.10, 2003-04-24 22:38:39-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] console cleanup (2/2)
Console drivers cleanup. In current tree interaction between
console and tty layer sits in the ->device() method of struct console.
It takes a pointer to console and returns device number of its tty
device. open(2) on /dev/console goes through the list of registered
consoles, picks the first one that has ->device() and remaps the device
number to console->device(console). Then it proceeds with normal
opening of tty. This is the only caller of ->device().
Cleanup: let ->device() return a pair (pointer to tty_driver, index
of tty in question) instead of device number. Note that
a) the first thing tty_open() does with remapped device number is
conversion to such pair.
b) console driver _knows_ which tty_driver we want - one that
implements tty interface to the same physical device (i.e. the part of
the same driver).
c) current code expects the result of ->device() to be a device
number of tty device - anything else is immediate -ENODEV from tty_open();
might as well have NULL ->device in that driver.
Console drivers converted, (the only) caller updated.
ChangeSet@1.1118.33.9, 2003-04-24 22:38:30-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] console cleanup (1/2)
Preparation to console->device() cleanup: serial drivers converted
to common helper for their ->device() methods.
ChangeSet@1.1118.33.8, 2003-04-24 22:34:58-07:00, ak@muc.de
[PATCH] Minor 32bit Opteron fixes
Don't disable the Northbridge Machine Check.
Use the unrolled "INTEL_USERCOPY" too.
ChangeSet@1.1118.33.6, 2003-04-24 16:14:59-07:00, greg@kroah.com
[PATCH] tty: let tiocmset pass TIOCM_LOOP changes to the tty drivers.
ChangeSet@1.1118.33.5, 2003-04-24 16:02:13-07:00, greg@kroah.com
Merge kroah.com:/home/greg/linux/BK/bleed-2.5
into kroah.com:/home/greg/linux/BK/gregkh-2.5
ChangeSet@1.1118.14.19, 2003-04-24 14:54:09-07:00, greg@kroah.com
[PATCH] USB: add error reporting functionality to the pl2303 driver.
ChangeSet@1.1118.27.10, 2003-04-24 13:38:03-07:00, greg@kroah.com
[PATCH] i2c: remove a lot of dupliated macros from i2c-sensor.h and use the current values in i2c.h
ChangeSet@1.1118.33.4, 2003-04-24 13:25:58-07:00, davem@nuts.ninka.net
[USB INPUT]: hiddev.c needs dev_fs_kernel.h
ChangeSet@1.1118.27.9, 2003-04-24 11:14:26-07:00, greg@kroah.com
[PATCH] i2c: removed unneeded typedef from i2c-sensor.h
ChangeSet@1.1118.27.8, 2003-04-24 11:14:04-07:00, greg@kroah.com
[PATCH] i2c: fix up the media drivers due to removing flags paramater of callback function
ChangeSet@1.1118.27.7, 2003-04-24 11:13:08-07:00, greg@kroah.com
[PATCH] i2c: removed unused flags paramater in found_proc callback.
ChangeSet@1.1118.27.6, 2003-04-24 10:26:56-07:00, greg@kroah.com
[PATCH] i2c: fix up it87.c check_region mess.
ChangeSet@1.1118.33.2, 2003-04-24 10:10:50-07:00, hch@lst.de
[PATCH] Fix devfs botch in IDE naming
Linus, could you please apply this patch so all thos poor devfs
users get their disks back?
ChangeSet@1.1118.33.1, 2003-04-24 10:07:04-07:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] fix init_irq
The patch is obviously correct and has been floating on lkml for some time.
From Manfred Spraul:
"My init_irq cleanup introduced a bug: on error, the function must return 1."
ChangeSet@1.1118.27.5, 2003-04-24 09:57:20-07:00, florin@iucha.net
[PATCH] i2c: added it87 driver
ChangeSet@1.1118.1.67, 2003-04-24 09:40:57-04:00, jejb@mulgrave.(none)
convert Megaraid to irqreturn_t
ChangeSet@1.1118.1.66, 2003-04-24 09:13:49-04:00, akpm@digeo.com
[PATCH] irqs: scsi
Update SCSI drivers for the new IRQ API. Also fix warnings and compilation
errors as encountered.
ChangeSet@1.1118.1.65, 2003-04-24 09:07:50-04:00, dmo@osdl.org
[PATCH] 2.5.68 scsi/gdth compile warnings and stack usage
James Bottomley, please apply this patch. It was sent out on
linux-scsi last week and drew no responses.
This is a patch for the scsi/gdth driver. It was originally
done in 2.5.67, but the patch applies to 2.5.68.
There are two components to this patch. The first component fixes
with compilation warnings (which did uncover real bugs). The other component
(by Randy Dunlap) reduces stack size usage in gdth_ioctl().
The compilation warnings occur only when CONFIG_HIGHMEM=y in the kernel
configuration file (enable either 4gig or 64gig memory support). This
changes the size of the dma_addr_t from u32 to u64.
The calls to pci_alloc_consistent return a value of type dma_addr_t.
But the code was casting a pointer to what was ony a 32-bit memory location.
This seonc component of the patch reduces stack size in
scsi/gdth.c::gdth_ioctl() by making each separate ioctl have its own
handler function, so that several large data structs are all declared on
the stack at the same time.
patch_name: gdth-stack_warnings.patch
patch_version: 2003-04-14.16:31:30
author: Randy.Dunlap <rddunlap@osdl.org>, Dave.Olien<dmo@osdl.org)
description: reduce stack usage in drivers/scsi/gdth.c::gdth_ioctl()
from 0xb50 to 0x5c (on P4, gcc 2.96); the large (ioctl)
function sizes in gdth.o now are:
150 ioc_event
178 ioc_resetdrv
190 ioc_general
30c ioc_hdrlist
324 ioc_rescan
so the largest cumulative size of calling gdth_ioctl() +
a specific ioctl is 0x5c + 0x324 = 0x380.
Fix compilation warnings in calls to pci_alloc_consistent()
that occur only when CONFIG_HIGHMEM=y. The compiler
warnings result from dma_addr_t changing in size from u32
to u64.
product: Linux
product_versions: 2.5.67
changelog: make each ioctl that uses large stack space into its own
function;
mostly moving lines of code around;
duplicates some local data in multiple functions;
fix compiler warnings by adding intermediate dma_addr_t local
variables to hold returns from pci_alloc_consistent.
maintainer: Achim Leubner (achim.leubner@intel.com)
diffstat: =
drivers/scsi/gdth.c | 664 ++++++++++++++++++++++++++---------------------
drivers/scsi/gdth_proc.c | 5
2 files changed, 374 insertions(+), 295 deletions(-)
FYI: The killer data structs in gdth_ioctl() (on x86, P4, gcc 2.96) are:
sizeof gdth_cmd_str: 336 bytes
sizeof gdth_ioctl_general: 356 bytes
sizeof gdth_ioctl_event: 308 bytes
sizeof gdth_ioctl_lockdrv: 204 bytes
sizeof gdth_ioctl_rescan: 406 bytes
###
ChangeSet@1.1118.1.64, 2003-04-24 09:07:26-04:00, patmans@us.ibm.com
[PATCH] scsi-misc-2.5 fix repeat_inquiry bflags setting
James -
The new printk for BLIST_INQUIRY_36 is getting a warning, and the
repeat_inquiry code is not quite right, since we reset *bflags after
getting the first INQUIRY.
Get rid of the warning, change the or-ing of the bflags settings, and get
rid of an extraneous BUG_ON.
===== drivers/scsi/scsi_scan.c 1.78 vs edited =====
ChangeSet@1.1118.1.63, 2003-04-24 09:07:09-04:00, hch@lst.de
[PATCH] remove proc_print_scsidevice abuse from drivers
proc_print_scsidevice is used for the scsi device listing in
/proc/scsi/scsi, but in addition two drivers (advansys and eata_pio)
are using it to duplicate the same information in their proc_info
method. Remove that output and make the function static to
scsi_proc.c. Also remove proc_scsi from the public headers - it
should really be private to the scsi midlayer but I don't think
we can shange the sg procfs name anymore.
ChangeSet@1.1118.32.2, 2003-04-24 00:32:52-07:00, shemminger@osdl.org
[BRIDGE]: Bridge confuses kernel user HZ.
ChangeSet@1.1118.32.1, 2003-04-24 00:31:25-07:00, shemminger@osdl.org
[BRIDGE]: Missing unlocks in ioctl error paths.
ChangeSet@1.1118.23.39, 2003-04-23 23:02:26-04:00, jgarzik@redhat.com
[netdrvr tg3] fix omission in board shutdown sequence
ChangeSet@1.1118.31.1, 2003-04-23 21:47:22-04:00, jgarzik@redhat.com
[netdrvr tg3] detect shared (and screaming) interrupts
ChangeSet@1.1118.23.37, 2003-04-23 18:32:58-07:00, akpm@digeo.com
[PATCH] fix typo in m68k mm code
Looks like my finger fell off the control key..
ChangeSet@1.1118.23.36, 2003-04-23 18:32:50-07:00, akpm@digeo.com
[PATCH] warning fixes
Fix some warnings from the new code-patching stuff.
ChangeSet@1.1118.23.35, 2003-04-23 18:32:42-07:00, akpm@digeo.com
[PATCH] print IRQ handler addresses
- Fix printk bug in the diagnostic code.
- If an error occurs, print the address of all the offending action
handlers. Also the symbol name if CONFIG_KALLSYMS.
ChangeSet@1.1118.23.34, 2003-04-23 18:28:28-07:00, hch@lst.de
[PATCH] fix dasd open/release
The invalidate_buffers in ->release is wrong, get a reference to the
discipline in the beginning of ->open.
ChangeSet@1.1118.23.33, 2003-04-23 18:28:20-07:00, hch@lst.de
[PATCH] remove a wrong invalidate_bdev from ide-disk.c
This one probably crept in during an ide merge from 2.4..
ChangeSet@1.1118.23.32, 2003-04-23 18:28:12-07:00, hch@lst.de
[PATCH] update s390 tape_block for 2.5 APIs
It looks like no one even tried to use it on 2.5..
ChangeSet@1.1118.23.31, 2003-04-23 18:28:03-07:00, hch@lst.de
[PATCH] fix devfs_mk_dir prototype
Return an error code instead of a devfs_handle_t. The handle isn't
useful for anything and the !CONFIG_DEVFS_FS stub in fact returned
NULL which made it entirely useless. Thus only one driver is actually
checking the retval in the current tree..
ChangeSet@1.1118.23.30, 2003-04-23 18:27:54-07:00, hch@lst.de
[PATCH] don't include devfs_fs_kernel.h in global headers
Now that devfs_handle_t is gone from all structs there is no
reason to include it in headers.
Fix the fallout by including previously implicit headers and fixing
the drivers that didn't include devfs_fs_kernel.h explicitly.
ChangeSet@1.1118.23.29, 2003-04-23 18:27:45-07:00, hch@lst.de
[PATCH] don't use mem_map_reserve/mem_map_unreserve
They are obsfucating aliases for SetPageReserved/ClearPageReserved.
And once they're gone we can nuke <linux/wrapper.h>
ChangeSet@1.1118.23.28, 2003-04-23 18:27:34-07:00, hch@lst.de
[PATCH] kill LOCAL_END_REQUEST
And uninline end_request - it's calling to many functions to be useful
inline.
ChangeSet@1.1118.23.27, 2003-04-23 18:27:26-07:00, hch@lst.de
[PATCH] split initrd from ramdisk driver
They don't have any code in common, so the initrd support can
go into a separate file and not require ramdisk support.
Lots of ifdefs gone and smaller kernel images for initrd users.
ChangeSet@1.1118.23.26, 2003-04-23 18:21:46-07:00, torvalds@home.transmeta.com
Since "apply_alternatives()" also runs at module load time it must
not be marked __init.
Noted by Petr Vandrovec
ChangeSet@1.1118.23.25, 2003-04-23 18:19:54-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (12/12)
* we allow tty_driver to cover more than 256 devices
* pty.c cleaned up - now we only one driver for UNIX98 masters and
only one driver for UNIX98 slaves, so a lot of ugliness can be killed.
* get_tty_driver() became an analog of get_gendisk() - it does
a lookup by device number and gives (pointer to tty_driver,index).
* registration/unregistration of tty_driver updated
* /proc/tty/drivers code updated (now one structure can be responsible
for several lines)
ChangeSet@1.1118.23.24, 2003-04-23 18:19:46-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (11/12)
tty->device switched to dev_t
There are very few uses of tty->device left by now; most of
them actually want dev_t (process accounting, proc/<pid>/stat, several
ioctls, slip.c logics, etc.) and the rest will go away shortly.
ChangeSet@1.1118.23.23, 2003-04-23 18:19:36-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (10/12)
Preparations to cleanup:
* call of get_tty_driver() moved from init_dev() to its callers
* instead of kdev_t dev we pass struct tty_struct *driver and int index
ChangeSet@1.1118.23.22, 2003-04-23 18:19:27-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (9/12)
* drivers/char/rio/* supports up to 4 boards, each with up to 128
lines. It used to share termios for 1st/3rd and 2nd/4th boards, Fixed.
* cleanups and kdev_t removals - we pass tty instead of tty->device
in a couple of helper functions and instead of comparisons on major(tty->device)
we check where does tty->driver point to.
ChangeSet@1.1118.23.21, 2003-04-23 18:19:18-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (8/12)
* generic_serial.c typo fix (->driver used instead of correct
->driver_data)
* tubio cleaned up
ChangeSet@1.1118.23.20, 2003-04-23 18:19:08-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (7/12)
sanitized driver->driver_name initialization and use
ChangeSet@1.1118.23.19, 2003-04-23 18:18:59-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (6/12)
tty->tty_index added; we initialize it with minor(tty->device) -
tty->driver->minor_start. Majority of remaining tty->device uses had
that form and are switched to use of tty->index.
ChangeSet@1.1118.23.18, 2003-04-23 18:18:48-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (5/12)
new field - tty->tty_name;
initialized to <driver->name><tty index+driver->base_name>
when we allocate tty_struct. Drivers code switched to use of that
beast (in debugging printks, mostly). Large, but trivial.
ChangeSet@1.1118.23.17, 2003-04-23 18:18:37-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (4/12)
Instead of registering "drivers" for /dev/tty, /dev/vc/0, /dev/ptmx
and /dev/console (they are never looked up since tty_open() special-cases
them and they should not be looked up - these devices are remapped on open)
we register corresponding chrdev ranges and devfs nodes directly.
/proc/tty/drivers code updated to keep the contents unchanged
ChangeSet@1.1118.23.16, 2003-04-23 18:18:28-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (3/12)
/proc/tty/drivers converted to seq_file
ChangeSet@1.1118.23.15, 2003-04-23 18:18:18-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (2/12)
Instead of copying tty_driver into tty_struct we put a reference
in there. tty->driver turned into a pointer, users updated. Large, but
trivial
ChangeSet@1.1118.23.14, 2003-04-23 18:18:07-07:00, viro@www.linux.org.uk
[PATCH] tty cleanups (1/12)
Christoph's fix for devfs problems with pty.
ChangeSet@1.1118.23.13, 2003-04-23 18:09:04-07:00, ahaas@airmail.net
[PATCH] C99 initializers for fs/proc/proc_misc.c
ChangeSet@1.1118.23.12, 2003-04-23 18:08:57-07:00, ahaas@airmail.net
[PATCH] Fix C99 initializers in fs/nfs/nfs4proc.c
ChangeSet@1.1118.23.11, 2003-04-23 18:08:48-07:00, ahaas@airmail.net
[PATCH] C99 initializers for drivers/block/genhd.c
ChangeSet@1.1118.23.10, 2003-04-23 18:08:40-07:00, elenstev@mesatop.com
[PATCH] Avast there ye swabs, prepare to fire a broadside!
Chuck Ebbert notes that kernel developers are apparently pirates in the
_original_ meaning of the word, and like to "cannonicalize".
I prepared a patch in case anyone cares enough about this. I tested on
i386 by building and booting.
ChangeSet@1.1118.23.9, 2003-04-23 18:08:30-07:00, pavel@ucw.cz
[PATCH] Fix SWSUSP & !SWAP
Swsusp without swap makes no sense, and leads to compilation
failure. So make the dependency clear in the config files.
ChangeSet@1.1118.23.8, 2003-04-23 17:50:15-07:00, bcollins@debian.org
[PATCH] IEEE1394/Firewire updates
- Workaround possible reset loop trying to get IRM sanity
- Logical Unit DIrectory (LUN) support for sbp2(scsi) devices.
- Fix hostnum allocation.
- Whitespace and formatting sync with 2.4 branch.
- Make pcilynx return IRQ_NONE for no interrupts to handle.
ChangeSet@1.1118.14.18, 2003-04-23 17:49:06-07:00, greg@kroah.com
[PATCH] USB: whiteheat: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.17, 2003-04-23 17:48:48-07:00, greg@kroah.com
[PATCH] USB: pl2303: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.16, 2003-04-23 17:48:28-07:00, greg@kroah.com
[PATCH] USB: mct_u232: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.15, 2003-04-23 17:48:10-07:00, greg@kroah.com
[PATCH] USB: kobil_sct: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.14, 2003-04-23 17:47:50-07:00, greg@kroah.com
[PATCH] USB: kl5kusb105: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.13, 2003-04-23 17:47:05-07:00, greg@kroah.com
[PATCH] USB: keyspan_pda: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.12, 2003-04-23 17:38:41-07:00, greg@kroah.com
[PATCH] USB: ftdi_sio: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.11, 2003-04-23 17:37:29-07:00, greg@kroah.com
[PATCH] USB: digi_acceleport: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.10, 2003-04-23 17:36:29-07:00, greg@kroah.com
[PATCH] USB: belkin_sa: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.9, 2003-04-23 17:35:42-07:00, greg@kroah.com
[PATCH] USB: usb-serial core: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.14.8, 2003-04-23 17:35:11-07:00, greg@kroah.com
[PATCH] USB: cdc-acm: add support for new tty tiocmget and tiocmset functions.
ChangeSet@1.1118.23.7, 2003-04-23 15:35:33-07:00, torvalds@home.transmeta.com
Merge bk://bk.arm.linux.org.uk/linux-2.5-pcmcia
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1118.29.5, 2003-04-23 22:04:13+01:00, rmk@flint.arm.linux.org.uk
[PCMCIA] Make cb_release_cis_mem() local to cardbus.c
The cardbus CIS parsing code does not use the PCMCIA resource
subsystem, so there isn't any point in freeing its memory when
we remove PCMCIA memory resources. We also free CIS resources
immediately prior to calling cb_free(). We might as well move
the function call into cb_free(), thereby making all references
to cb_release_cis_mem() local to cardbus.c
ChangeSet@1.1118.29.4, 2003-04-23 21:18:16+01:00, rmk@flint.arm.linux.org.uk
[PCMCIA] Don't cache CIS bytes found to be invalid.
Several PCMCIA cards I have here do not work correctly over a
suspend/resume cycle; the PCMCIA code believes that the card has
been changed in the slot, and therefore performs a remove/insert
cycle.
This seems to be because the card returns more or less random data
when reading memory space, leading to the CIS cache mismatching
the card data. This in turn is caused because we try to read CIS
data from both the attribute and memory spaces, and we add the result
to the CIS cache whether or not the returned data was valid.
We therefore convert the CIS cache to use a linked list, and provide
a way to remove cached data from that list. We also replace the
"s->cis_used=0;" construct with a function "destroy_cis_cache(s)"
which clearly describes what we're doing.
ChangeSet@1.1118.29.3, 2003-04-23 20:59:33+01:00, proski@org.rmk.(none)
[PCMCIA] Fix oops in validate_mem when CONFIG_PCMCIA_PROBE=n
If I compile a recent 2.5.x kernel without CONFIG_ISA defined, I get
an oops in validate_mem(). Stack trace contains 0x6b6b6b6 - a clear
sign that freed memory is being accessed.
It's the second validate_mem() in drivers/pcmcia/rsrc_mgr.c - the one
used when CONFIG_PCMCIA_PROBE is not defined. It turns out the memory
is freed in do_mem_probe() when it's called from validate_mem().
The solution is to use the same trick as in the first validate_mem().
This problem is quite serious and it's not specific to the plx9052
driver. I see it with yenta_socket as well.
ChangeSet@1.1118.29.2, 2003-04-23 20:55:14+01:00, hch@de.rmk.(none)
[PCMCIA] remove unused files
From Christoph Hellwig
There's no need to keep the stubs around.
ChangeSet@1.1118.29.1, 2003-04-23 20:51:31+01:00, proski@org.rmk.(none)
[PCMCIA] Fix compilation of cardmgr
Patch from Pavel Roskin
ds.h should not be including linux/device.h when compiling userspace
code.
ChangeSet@1.1118.28.2, 2003-04-23 21:18:52+02:00, marcel@holtmann.org
[Bluetooth] Correction of the HCI USB driver description
This patch reverts the module description and other comments.
ChangeSet@1.1118.14.7, 2003-04-23 12:07:03-07:00, baldrick@wanadoo.fr
[PATCH] USB speedtouch: compile fix
The rx_inuse field no longer exists.
ChangeSet@1.1118.14.6, 2003-04-23 12:06:40-07:00, baldrick@wanadoo.fr
[PATCH] USB speedtouch: crc optimization
ChangeSet@1.1118.14.5, 2003-04-23 12:06:14-07:00, baldrick@wanadoo.fr
[PATCH] USB speedtouch: bump the version number
ChangeSet@1.1118.14.4, 2003-04-23 12:05:40-07:00, david-b@pacbell.net
[PATCH] usb: fix (rare?) disconnect
It's not good to dereference pointers before checking
them for null. Seen once on a faulty device init,
which I don't think I'd ever seen before "in the wild".
(Caused by some other 2.5.68 strangeness.)
ChangeSet@1.1118.14.3, 2003-04-23 12:05:10-07:00, david-b@pacbell.net
[PATCH] USB: hcd-pci.c catch up to dev_printk changes
The preceding patch to fix this was incomplete, since
it didn't work for the pure debug messages. And that
was because the DEBUG-vs-CONFIG_USB_DEBUG stuff changed
somewhere.
ChangeSet@1.1118.14.2, 2003-04-23 12:04:22-07:00, akpm@digeo.com
[PATCH] usb: minor usb stuff
- nail a couple of warnings
- usbnet is not compilable with gcc-2.95.3. Fix.
ChangeSet@1.1118.27.4, 2003-04-23 11:33:48-07:00, hch@lst.de
[PATCH] i2c: bring i2c-viapro uptodate with the style guide
ChangeSet@1.1118.27.3, 2003-04-23 11:33:28-07:00, hch@lst.de
[PATCH] i2c: remove dead init code from i2c-sensors.c
ChangeSet@1.1118.27.2, 2003-04-23 11:33:09-07:00, hch@lst.de
[PATCH] i2c: remove dead code from adm1021
Enough testing :) This is the last user of some junk in i2c-sensors.h,
so it should better go away sooner than later..
ChangeSet@1.1118.27.1, 2003-04-23 11:32:48-07:00, hch@lst.de
[PATCH] i2c: remove dead junk from i2c-sensors.h
ChangeSet@1.1118.25.3, 2003-04-23 10:57:23-07:00, agrover@groveronline.com
ACPI: Indicate whether we handled the interrupt or not
ChangeSet@1.1118.25.2, 2003-04-23 10:32:32-07:00, agrover@groveronline.com
Merge groveronline.com:/root/bk/linux-2.5
into groveronline.com:/root/bk/linux-acpi
ChangeSet@1.971.119.3, 2003-04-23 10:22:16-07:00, agrover@groveronline.com
ACPI: Add missing include
ChangeSet@1.1118.16.2, 2003-04-23 10:01:20-07:00, maxk@qualcomm.com
Merge bk://linux-bt.bkbits.net/marcel-2.5
into qualcomm.com:/home/kernel/bt-2.5
ChangeSet@1.1118.25.1, 2003-04-23 08:50:36-07:00, torvalds@home.transmeta.com
Never merge vma's that have mapping-private data.
ChangeSet@1.1120, 2003-04-23 07:16:28-05:00, stevef@steveft21.ltcsamba
fix hang in truncate setting file size
ChangeSet@1.971.23.3, 2003-04-23 13:55:48+02:00, marcel@holtmann.org
[Bluetooth] Fix L2CAP binding to local address
In the function l2cap_connect_ind() we compare the bounded
address with the address of an incoming connection, but we
have to compare it with the local address of the HCI device.
ChangeSet@1.1118.24.7, 2003-04-23 00:19:42-07:00, davem@nuts.ninka.net
[NET]: SG without checksum support is illegal.
ChangeSet@1.1118.23.4, 2003-04-23 00:07:21-07:00, rob@osinvestor.com
[SPARC]: Kill initialize_secondary, unused.
ChangeSet@1.1118.24.6, 2003-04-22 23:57:57-07:00, yoshfuji@linux-ipv6.org
[IPV6]: dst_alloc() clean-up.
ChangeSet@1.1118.24.5, 2003-04-22 23:56:10-07:00, whydoubt@yahoo.com
[NETFILTER IPV4]: Fix typo in Kconfig.
ChangeSet@1.1118.24.4, 2003-04-22 23:53:39-07:00, dlstevens@us.ibm.com
[IGMP]: Fix bug in broadcast handling.
ChangeSet@1.1118.24.3, 2003-04-22 23:51:48-07:00, dlstevens@us.ibm.com
[IGMPv3/MPDv2]: Bug fixes and ipv4 multiprotocol API.
ChangeSet@1.1118.23.3, 2003-04-22 23:40:17-07:00, davem@nuts.ninka.net
[SPARC64]: Kill unnecessary MOD_{INC,DEC}_USE_COUNT in cpwatchdog and envctrl drivers.
ChangeSet@1.1118.24.2, 2003-04-22 23:14:38-07:00, davem@nuts.ninka.net
[NET]: Do not let GCC reload pointers after NULL checks.
ChangeSet@1.1118.24.1, 2003-04-23 02:53:59-03:00, acme@conectiva.com.br
o net: module refcounting for sk_alloc/sk_free
I had to move the rtnetlink_init and init_netlink calls to af_netlink init time, so that
the sk_alloc called down the rtnetlink_init callchain is done after the PF_NETLINK
net_proto_family is sock_registered, and because of that the af_netlink init function
call had to be moved to earlier by means of subsys_initcall (DaveM's suggestion).
ChangeSet@1.1118.23.2, 2003-04-22 22:43:16-07:00, ebrower@usa.net
[SPARC]: Refactor AUXIO support.
ChangeSet@1.1118.23.1, 2003-04-22 21:37:21-07:00, zaitcev@redhat.com
[SPARC]: Colin Gibbs gcc-3.x support.
ChangeSet@1.1118.10.14, 2003-04-22 15:55:13-05:00, jejb@raven.il.steeleye.com
Compile fix for 53c700 on PA-RISC
ChangeSet@1.1118.10.13, 2003-04-22 15:53:08-05:00, jejb@raven.il.steeleye.com
Fix ncr53c8xx for PA-RISC Zalon SCSI driver
Although this driver is ancient and unmaintained, it is still used
by the 53c700 based PA-RISC zalon. The changes are:
- Add slave_configure entry for zalon
- Moved to new error handling
- changed to irqreturn_t for interrupt handler
ChangeSet@1.1118.10.12, 2003-04-22 14:56:31-05:00, ahaas@airmail.net
[PATCH] C99 initializers for drivers/scsi
This set of 4 patches convert files to use C99 initializers. The patches
are against the current BK.
ChangeSet@1.971.48.3, 2003-04-22 17:41:00+01:00, aia21@cantab.net
NTFS: Fix typo and release 2.1.3.
ChangeSet@1.1118.1.61, 2003-04-22 09:34:47-07:00, lkml@shemesh.biz
[PATCH] Fix IRDA irq handler prototype
This fixes a mismatch in declaration between "irport_interrupt" in the
header files (returning void) and in the definition (returning
irqreturn_t).
ChangeSet@1.1118.20.4, 2003-04-22 08:33:21-07:00, neilb@cse.unsw.edu.au
[PATCH] Update umem driver for newer cards.
ChangeSet@1.1118.20.3, 2003-04-22 08:33:10-07:00, neilb@cse.unsw.edu.au
[PATCH] Update umem to new request_irq interface
request_irq requires a handler that returns irqreturn_t,
so mm_interrupt now returns the appropriate value
ChangeSet@1.1118.21.1, 2003-04-22 08:18:01-07:00, axboe@suse.de
[PATCH] request structure stack corruption
This fixes a problem with drivers that have request on the stack for
some operations, like IDE. If we wake before releasing the request, the
stack may have already disappeared beneath us when the rest of
end_that_request_last() is run.
Fix by making sure the completion is done _last_.
ChangeSet@1.1118.10.11, 2003-04-22 09:04:38-05:00, jejb@raven.il.steeleye.com
Add irqreturn_t to scsi/psi240i
ChangeSet@1.1118.10.10, 2003-04-22 08:58:50-05:00, mikenc@us.ibm.com
[PATCH] fixes compile errors in psi240i.c
The attached patch fixes the compile errors in psi240i.c described in
Bugzilla bug #468 at http://bugme.osdl.org/show_bug.cgi?id=468. It was
built against 2.5.68. I do not have the hardware, so I have only
verified that it compiles correctly.
ChangeSet@1.1118.1.58, 2003-04-22 00:47:19-07:00, steve@gw.chygwyn.com
[IP_GRE]: Kill duplicate update_pmtu call.
ChangeSet@1.1118.1.57, 2003-04-22 00:41:06-07:00, shemminger@osdl.org
[BRIDGE]: New maintainership.
ChangeSet@1.1118.19.4, 2003-04-22 00:36:52-07:00, davem@nuts.ninka.net
[SPARC64]: Add LOOP_{GET,SET}_STATUS64 to ioctl32.
ChangeSet@1.1118.19.3, 2003-04-22 00:09:33-07:00, davem@nuts.ninka.net
[SPARC]: CLOCK_MONOTONIC fixes, from x86.
ChangeSet@1.1118.1.56, 2003-04-22 00:00:59-07:00, davem@nuts.ninka.net
[NETLINK]: Fix minor numbers in netlink_dev.c
ChangeSet@1.1118.19.2, 2003-04-21 23:58:39-07:00, davem@nuts.ninka.net
[SPARC64]: Update defconfig.
ChangeSet@1.1118.19.1, 2003-04-21 23:13:33-07:00, elenstev@mesatop.com
[SPARC64]: Spelling fixes.
ChangeSet@1.1118.18.1, 2003-04-21 23:05:40-07:00, torvalds@home.transmeta.com
Fix irq event debug print-out, and add stack dump which can
give a clue about what the context was that might have caused
the spurious interrupt.
ChangeSet@1.1118.17.3, 2003-04-22 00:16:52-03:00, acme@conectiva.com.br
o rtnetlink_dev: use C99 struct init style
ChangeSet@1.1118.17.2, 2003-04-22 00:07:15-03:00, acme@conectiva.com.br
o atm/lec.c: use C99 struct init style
ChangeSet@1.1118.17.1, 2003-04-21 23:48:15-03:00, acme@conectiva.com.br
o rtnetlink: use C99 struct init style
ChangeSet@1.1118.16.1, 2003-04-21 16:48:01-07:00, linux-bt.adm@hostme.bitkeeper.com
Merge bk://linux.bkbits.net/linux-2.5
into hostme.bitkeeper.com:/ua/repos/l/linux-bt/bt-2.5
ChangeSet@1.1118.1.52, 2003-04-21 16:31:33-07:00, torvalds@home.transmeta.com
Add the Xeon variations (Pentium-III and P4-based) to the list
of Intel CPU optimizations. From Andi Kleen.
ChangeSet@1.1118.10.9, 2003-04-21 18:24:19-05:00, patmans@us.ibm.com
[PATCH] fix ppa locking and oops
We no longer hold the host_lock while calling the detect function, so
re-acquiring the lock while (without even unlocking it) in ppa_detect is
very wrong. References to the possibly NULL value hreg can also cause
oopses.
ChangeSet@1.1118.1.51, 2003-04-21 16:23:20-07:00, ak@muc.de
[PATCH] Runtime memory barrier patching
This implements automatic code patching of memory barriers based
on the CPU capabilities. Normally lock ; addl $0,(%esp) barriers
are used, but these are a bit slow on the Pentium 4.
Linus proposed this a few weeks ago after the support for SSE1/SSE2
barriers was introduced. I now got around to implement it.
The main advantage is that it allows distributors to ship less binary
kernels but still get fast kernels. In particular it avoids the
need of a special Pentium 4 kernel.
The patching code is quite generic and could be used to patch
other instructions (like prefetches or specific other critical
instructions) too.
Thanks to Rusty's in kernel loader it also works seamlessly for modules.
The patching is done before other CPUs start to avoid potential
erratas with self modifying code on SMP systems. It makes no
attempt to automatically handle assymetric systems (an secondary
CPU having less capabilities than the boot CPU). In this
case just boot with "noreplacement"
ChangeSet@1.1118.1.50, 2003-04-21 16:23:10-07:00, akpm@digeo.com
[PATCH] More careful about VMA merging
The VMA merging code can merge vmas which have a ->vm_ops->close() handler.
But this means that per-VMA resources in one of the merged VMAs will not be
freed.
Fix that up by just refusing to merge any VMA's which look "complex": they
have special flags set or they have a ->close handler.
ChangeSet@1.1118.11.4, 2003-04-21 23:45:12+01:00, elenstev@com.rmk.(none)
[ARM] spelling fixes for arm
Patch from Steven Cole.
Here are some spelling fixes for arm.
This was diffed against the current 2.5 tree.
ChangeSet@1.1118.10.8, 2003-04-21 17:03:47-05:00, jejb@raven.il.steeleye.com
irqreturn_t fixup for 53c700
ChangeSet@1.1118.14.1, 2003-04-21 13:41:39-07:00, greg@kroah.com
Merge kroah.com:/home/greg/linux/BK/bleed-2.5
into kroah.com:/home/greg/linux/BK/gregkh-2.5
ChangeSet@1.1118.13.1, 2003-04-21 13:24:30-07:00, rml@tech9.net
[PATCH] trivial task_prio() fix
Here is a trivial fix for task_prio() in the case MAX_RT_PRIO !=
MAX_USER_RT_PRIO. In this case, all priorities are skewed by
(MAX_RT_PRIO - MAX_USER_RT_PRIO).
The fix is to subtract the full MAX_RT_PRIO value from p->prio, not just
MAX_USER_RT_PRIO. This makes sense, as the full priority range is
unrelated to the maximum user value. Only the real maximum RT value
matters.
This has been in Andrew's tree for awhile, with no issue. Also, Ingo
acked it.
ChangeSet@1.1118.1.48, 2003-04-21 13:10:51-07:00, torvalds@penguin.transmeta.com
Allow gcc to generate better code for irq handling.
Ok, now that most drivers have been converted to the new
irqreturn_t, we can remove the fascist type-checks and just
use a regular integer type which has a simpler calling
convention.
ChangeSet@1.1118.1.47, 2003-04-21 12:46:13-07:00, paulkf@microgate.com
[PATCH] n_hdlc update
With suggestions from Chritoph Hellwig
- Remove MODULE_USE_COUNT macros
- Add owner member to struct tty_ldisc
- Init tty_ldisc at compile time
- make some functions static
ChangeSet@1.1118.10.7, 2003-04-21 14:20:45-05:00, jejb@raven.il.steeleye.com
scsi_scan.c: cope with second inquiry failure
If the second (and longer inquiry) in scsi_scan.c fails for any
reason, we should fall back to the original (and successful)
36 byte inquiry rather than not configuring the device.
ChangeSet@1.1118.1.46, 2003-04-21 11:48:52-07:00, paulkf@microgate.com
[PATCH] synclink_cs update
- Remove MODULE_USE_COUNT macros
- Add owner member
- Add tiocmget/tiocmset tty callbacks
ChangeSet@1.1118.1.45, 2003-04-21 11:47:01-07:00, paulkf@microgate.com
[PATCH] synclinkmp update
- Remove MODULE_USE_COUNT macros
- Add owner member
- Add tiocmget/tiocmset tty callbacks
ChangeSet@1.1118.1.44, 2003-04-21 11:45:56-07:00, paulkf@microgate.com
[PATCH] synclink update
- Remove MODULE_USE_COUNT macros
- Add owner member
- Add tiocmget/tiocmset tty callbacks
ChangeSet@1.1118.1.43, 2003-04-21 11:28:14-07:00, bcollins@debian.org
[PATCH] 1394 updates
- New irq handler prototypes.
- Lots of un-enumurated locking fixes/cleanups (thanks in large part to
spinlock debug compile options in the kernel).
- Other various trivial fixes.
ChangeSet@1.1118.1.42, 2003-04-21 11:27:24-07:00, torvalds@home.transmeta.com
Return IRQ_NONE for ieee1394 driver when the interrupt was for
somebody else.
ChangeSet@1.1118.1.41, 2003-04-21 11:23:36-07:00, mzyngier@freesurf.fr
[PATCH] Convert Alpha to the new 2.5 IRQ API
This converts the Alpha architecture to the new IRQ API. Tested on
Jensen.
ChangeSet@1.1118.1.40, 2003-04-21 11:23:28-07:00, jgarzik@pobox.com
[PATCH] fix printk when an irq doesn't get responded to
ChangeSet@1.1118.1.38, 2003-04-21 10:39:45-07:00, torvalds@home.transmeta.com
Resolve differences between Davem and Andrew on irq updates
ChangeSet@1.1118.1.37, 2003-04-21 10:32:35-07:00, akpm@digeo.com
[PATCH] irqs: hotplug drivers
Update hotplug and pcmcia drivers to the new IRQ API.
ChangeSet@1.1118.12.15, 2003-04-21 10:21:28-07:00, akpm@digeo.com
[PATCH] irqs: input drivers
Update the input and joystick drivers to the new IRQ API.
ChangeSet@1.1118.12.14, 2003-04-21 10:21:21-07:00, akpm@digeo.com
[PATCH] irqs: ISDN
Update ISDN for the new IRQ API.
ChangeSet@1.1118.12.13, 2003-04-21 10:21:11-07:00, akpm@digeo.com
[PATCH] irqs: IRDA
Update the IRDA drivers to the new IRQ API.
ChangeSet@1.1118.12.12, 2003-04-21 10:21:04-07:00, akpm@digeo.com
[PATCH] ax25 build fix
spin_lock() does not take a spinlock_t**
ChangeSet@1.1118.12.11, 2003-04-21 10:20:56-07:00, akpm@digeo.com
[PATCH] parport_serial fix
parport_serial is calling a couple of 8250 driver functions with no prototypes
in scope.
Turns out it was calling them with too many args, too.
ChangeSet@1.1118.12.10, 2003-04-21 10:20:47-07:00, akpm@digeo.com
[PATCH] irqs: 1394
Update 1394 to the new IRQ API
ChangeSet@1.1118.12.9, 2003-04-21 10:20:39-07:00, akpm@digeo.com
[PATCH] irqs: video drivers
Update video drivers to the new IRQ API.
Almost none of them compile, so it was done on-spec.
ChangeSet@1.1118.12.8, 2003-04-21 10:20:32-07:00, akpm@digeo.com
[PATCH] irqs: multimedia drivers
Update a couple of media drivers to the new IRQ API.
Some stuff in there doesn't link btw:
drivers/built-in.o: In function `rds_waitread':
drivers/built-in.o(.text+0x6c152): undefined reference to `aci_port'
drivers/built-in.o: In function `rds_rawwrite':
drivers/built-in.o(.text+0x6c1a3): undefined reference to `aci_port'
ChangeSet@1.1118.12.7, 2003-04-21 10:19:17-07:00, akpm@digeo.com
[PATCH] irqs: various char drivers
Fix up a bunch of char drivers for the new IRQ API.
ChangeSet@1.1118.12.6, 2003-04-21 10:19:09-07:00, akpm@digeo.com
[PATCH] irqs: watchdog drivers
Update the watchdog drivers to the new IRQ API.
Also, give a couple of irq handlers static scope.
ChangeSet@1.1118.12.5, 2003-04-21 10:19:01-07:00, akpm@digeo.com
[PATCH] irqs: ipmi driver
Update the ipmi driver to the new IRQ API
ChangeSet@1.1118.12.4, 2003-04-21 10:18:53-07:00, akpm@digeo.com
[PATCH] irqs in sound/
Updates all sound drivers to the new IRQ API.
The patch also fixes
- a return-with-lock-held
- a bunch of warnings and 64-bit bugs (CPU flags must be held in an
unsigned long)
- jiffies must use unsigned longs
- two functions returning uninitialised values
ChangeSet@1.1118.12.3, 2003-04-21 10:18:42-07:00, akpm@digeo.com
[PATCH] irqs: rtc
update rtc driver to new IRQ API
ChangeSet@1.1118.12.2, 2003-04-21 10:18:34-07:00, akpm@digeo.com
[PATCH] irqs: sym2
update sym2 for new IRQ API
ChangeSet@1.1118.12.1, 2003-04-21 10:18:27-07:00, akpm@digeo.com
[PATCH] irqs: drivers/block
update drivers/block for new IRQ API.
ChangeSet@1.1118.11.3, 2003-04-21 17:36:54+01:00, eli.carter@com.rmk.(none)
[ARM PATCH] 1510/1: use a #define for asm jump address
Patch from Eli Carter
# Mon Apr 21 11:11:41 CDT 2003 ejc@rnd-linux-c84
# use-physoffset-define
#
# Use the PHYS_OFFSET #define instead of a hard-coded value.
#
# Diffed against linux-2.5.67-rmk1+1501-3+1506
#
# arch/arm/boot/compressed/head-xscale.S | 2 +-
# 1 files changed, 1 insertion(+), 1 deletion(-)
#
ChangeSet@1.1118.11.2, 2003-04-21 17:31:47+01:00, eli.carter@com.rmk.(none)
[ARM PATCH] 1511/1: iop321 #define cleanup
Patch from Eli Carter
# Mon Apr 21 11:20:06 CDT 2003 ejc@rnd-linux-c84
# pci-io-mem-size-defines
#
# Rename the IOP321_PCI_WINDOW_SIZE #defines to use
# IOP321_PCI_{IO,MEM}_{BASE,SIZE} instead. This makes the #defines a bit more
# consistent. No functional change, though it does bring up the question of
# whether res[].end should be BASE+SIZE-1 or BASE+SIZE.
#
# Diffed against linux-2.5.67-rmk1+1501-3+1506+1508-10
#
# arch/arm/mach-iop3xx/iop321-pci.c | 8 ++++----
# include/asm-arm/arch-iop3xx/iop321.h | 10 ++++------
# 2 files changed, 8 insertions(+), 10 deletions(-)
#
ChangeSet@1.1118.11.1, 2003-04-21 17:27:44+01:00, eli.carter@com.rmk.(none)
[ARM PATCH] 1508/1: use #define's for iq80321
Patch from Eli Carter
# Thu Apr 17 16:37:58 CDT 2003 ejc@rnd-linux-c84
# iq80321-use-addr-defines
#
# Use #define's instead of hard-coded numbers for the device locations for the
# iq80321 board.
#
# Diffed against linux-2.5.65-rmk1+1472-4+1502-3+1506
# Applies cleanly to linux-2.5.67-rmk1+1502-3+1506
#
# arch/arm/mach-iop3xx/mm-321.c | 4 ++--
# 1 files changed, 2 insertions(+), 2 deletions(-)
#
ChangeSet@1.1118.10.6, 2003-04-21 09:42:53-05:00, dougg@torque.net
scsi_mid_low_api.txt update for 2.5.67
ChangeSet@1.1118.10.5, 2003-04-21 09:35:07-05:00, hch@lst.de
[PATCH] kill ASSERT_LOCK
There's just one user left, and that one is in aha152x.c and thus
clearly bogus..
ChangeSet@1.1118.10.4, 2003-04-21 09:33:52-05:00, hch@lst.de
[PATCH] unexport scsi_host_get_next
No drivers are using it anymore, and having this private to the
midlayer should make proper shost refcounting easier.
ChangeSet@1.1118.10.3, 2003-04-21 09:32:33-05:00, hch@lst.de
[PATCH] scsi_scan.c coding style fixes
Just some random styleups I made while walking over the file
for the devfs work.
ChangeSet@1.1118.10.1, 2003-04-21 09:17:58-05:00, jejb@raven.il.steeleye.com
Merge raven.il.steeleye.com:/home/jejb/BK/scsi-misc-old-2.5
into raven.il.steeleye.com:/home/jejb/BK/scsi-misc-2.5
ChangeSet@1.1118.1.36, 2003-04-21 00:05:54-07:00, davem@nuts.ninka.net
[SOUND TRIDENT]: Update for irqreturn_t.
ChangeSet@1.1118.1.35, 2003-04-21 00:04:40-07:00, davem@nuts.ninka.net
[SOUND PCI]: Update several drivers for irqreturn_t.
ChangeSet@1.1118.1.34, 2003-04-21 00:01:36-07:00, davem@nuts.ninka.net
[MYRI_SBUS]: Update for irqreturn_t.
ChangeSet@1.1118.1.33, 2003-04-21 00:00:40-07:00, davem@nuts.ninka.net
[NET SUN]: Update for irqreturn_t.
ChangeSet@1.1118.1.32, 2003-04-20 23:59:56-07:00, davem@nuts.ninka.net
[TG3]: Update to irqreturn_t.
ChangeSet@1.1118.1.31, 2003-04-20 23:57:00-07:00, davem@nuts.ninka.net
[SCSI SYM53C8XX_2]: Update for irqreturn_t.
ChangeSet@1.1118.1.30, 2003-04-20 23:56:22-07:00, davem@nuts.ninka.net
[SCSI AIC7XXX_OLD]: Update for irqreturn_t.
ChangeSet@1.1118.1.29, 2003-04-20 23:55:54-07:00, davem@nuts.ninka.net
[SCSI QLOGICPTI]: Update for irqreturn_t.
ChangeSet@1.1118.1.28, 2003-04-20 23:55:37-07:00, davem@nuts.ninka.net
[SCSI QLOGICISP]: Update for irqreturn_t.
ChangeSet@1.1118.1.27, 2003-04-20 23:55:14-07:00, davem@nuts.ninka.net
[SCSI QLOGICFC]: Update for irqreturn_t.
ChangeSet@1.1118.1.26, 2003-04-20 23:54:57-07:00, davem@nuts.ninka.net
[SCSI ESP]: Update for irqreturn_t.
ChangeSet@1.1118.1.25, 2003-04-20 23:54:23-07:00, davem@nuts.ninka.net
[MESSAGE FUSION]: Update for irqreturn_t.
ChangeSet@1.1118.1.24, 2003-04-20 23:51:55-07:00, davem@nuts.ninka.net
[FC4 SPARC]: Update for irqreturn_t.
ChangeSet@1.1118.1.23, 2003-04-20 23:50:54-07:00, davem@nuts.ninka.net
[RTC]: Update for irqreturn_t.
ChangeSet@1.1118.1.22, 2003-04-20 23:48:31-07:00, davem@nuts.ninka.net
[CHAR SPARC]: Update for irqreturn_t.
ChangeSet@1.1118.1.21, 2003-04-20 23:46:05-07:00, davem@nuts.ninka.net
[SOUND]: mpu401.h needs linux/interrupt.h
ChangeSet@1.1118.1.20, 2003-04-20 23:45:08-07:00, davem@nuts.ninka.net
[SERIAL SPARC]: Update for irqreturn_t.
ChangeSet@1.1118.1.19, 2003-04-20 23:43:58-07:00, davem@nuts.ninka.net
[SPARC]: Platform code changes for irqreturn_t.
ChangeSet@1.1118.1.18, 2003-04-20 23:41:32-07:00, davem@nuts.ninka.net
[SPARC]: Fix dumb typo in sun4c mm code.
ChangeSet@1.1118.1.17, 2003-04-20 23:41:00-07:00, davem@nuts.ninka.net
[SOUND SPARC]: Update for irqreturn_t.
ChangeSet@1.1118.1.16, 2003-04-20 23:39:28-07:00, davem@nuts.ninka.net
[SPARC]: setup.c needs linux/initrd.h
ChangeSet@1.1118.7.7, 2003-04-21 02:39:27-04:00, jgarzik@redhat.com
net driver cleanup, volume 6
Affected drivers: atp, de600, de620, eepro, eexpress, lp486e,
3c589_cs, axnet_cs, fmvj18x_cs, nmclan_cs, pcnet_cs, smc91c92_cs,
xirc2ps_cs, sk98lin, xircom_cb, xircom_tulip_cb, airo, arlan,
netwave_cs, orinoco, ray_cs, wavelan, znet
98% contributed by Andrew Morton
ChangeSet@1.1118.7.6, 2003-04-21 02:00:55-04:00, jgarzik@redhat.com
net driver cleanup, volume 5
Affected drivers: 3c505 (notably), depca, ni5010, ni52, ni65,
dmfe, winbond-840.
3c505 included quite a few s/int timeout/unsigned long timeout/
changes as well, for proper jiffies comparison typing.
98% contributed by Andrew Morton.
ChangeSet@1.1118.7.5, 2003-04-21 01:41:23-04:00, jgarzik@redhat.com
net driver cleanup, volume 4
Affected drivers: 3c501, 3c507, 3c509, 3c5154, 3c59x, amd8111e,
at1700, e1000, hp100, lance, smc9194, de2104x, de4x5, tulip,
typhoon.
98% contributed by Andrew Morton.
ChangeSet@1.1118.8.1, 2003-04-20 22:30:13-07:00, davem@nuts.ninka.net
[NET]: In sock_alloc_send_pskb, add __GFP_REPEAT when __GFP_WAIT.
ChangeSet@1.1118.7.4, 2003-04-21 01:10:01-04:00, jgarzik@redhat.com
net driver cleanup, volume 3
Affected drivers: 8139cp, 8139too, 82596, b44, cs89x0, dl2k, r8169
Vast majority of changes contributed by Andrew Morton.
ChangeSet@1.1118.1.15, 2003-04-20 22:05:24-07:00, davem@nuts.ninka.net
[SPARC]: Rename signal macros SV_foo --> _SV_foo.
ChangeSet@1.1118.7.3, 2003-04-21 00:58:42-04:00, jgarzik@redhat.com
net driver cleanup, volume 2
morq irqreturn_t,
some s/long flags/unsigned long flags/,
more set_bit-on-something-other-than-long cleanups
Affected drivers: epic100, fealnx, natsemi, ns83820, starfire,
sundance, via-rhine, yellowfin. (and also include/linux/eeprom.h)
Several changes contributed by Andrew Morton.
ChangeSet@1.1118.7.2, 2003-04-21 00:26:55-04:00, jgarzik@redhat.com
net driver cleanup, volume 1:
Mostly updating to new irqreturn_t, but also includes some needed
SET_MODULE_OWNER and set_bit cleanups as well.
Affects: 8390, dgrs, eepro100, epic100, pcnet32, rcpci45,
sis900, tlan
ChangeSet@1.1118.1.14, 2003-04-20 18:29:08-07:00, davem@nuts.ninka.net
[SPARC64]: A few missing pgtable __GFP_REPEAT.
ChangeSet@1.1118.1.13, 2003-04-20 16:00:26-07:00, torvalds@home.transmeta.com
Fix IO-APIC vector allocation boundary case - we never want to
allocate FIRST_SYSTEM_VECTOR as an external interrupt. It's unlikely,
but could happen if we have a _ton_ of interrupt sources.
Found by Chuck Ebbert.
ChangeSet@1.1118.1.12, 2003-04-20 15:20:38-07:00, rddunlap@osdl.org
[PATCH] replace URLs in Kconfig
This is a patch from Robert P.J. Day that replaces www.linuxdoc.org
(which is outdated and unspported according to www.tldp.org)
with www.tldp.org in lots of Kconfig files.
ChangeSet@1.1118.4.5, 2003-04-20 14:52:14-07:00, torvalds@home.transmeta.com
Merge
ChangeSet@1.1118.6.38, 2003-04-20 14:50:20-07:00, hch@lst.de
[PATCH] remove a tiny bit of kdev_t abuse from the floppy driver
ChangeSet@1.1118.6.37, 2003-04-20 14:50:12-07:00, hch@lst.de
[PATCH] remove some junk from hd98.c's ioctl implementation
Also pointed out by Al.
ChangeSet@1.1118.6.36, 2003-04-20 14:50:04-07:00, hch@lst.de
[PATCH] remove dasd_get_kdev
Al pointed out that it's unused after my last series of devfs patches.
ChangeSet@1.1118.6.35, 2003-04-20 14:49:56-07:00, hch@lst.de
[PATCH] replace __blk_run_queue with blk_run_queue
All callers of __blk_run_queue are of the form
spin_lock_irqsave(q->queue_lock, flags);
__blk_run_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
Replace it with a blk_run_queue that does the locking itself.
ChangeSet@1.1118.6.34, 2003-04-20 14:49:47-07:00, hch@lst.de
[PATCH] rename end_request in floppy() and raid1
In preparation of getting rid of the LOCAL_END_REQUEST mess.
ChangeSet@1.1118.6.33, 2003-04-20 14:49:38-07:00, hch@lst.de
[PATCH] initrd.h
split the initrd stuff out of blk.h, it's only needed in the boot code
and the ramdisk driver.
ChangeSet@1.1118.4.4, 2003-04-20 14:47:49-07:00, torvalds@home.transmeta.com
Merge home.transmeta.com:/home/torvalds/v2.5/akpm
into home.transmeta.com:/home/torvalds/v2.5/linux
ChangeSet@1.1118.4.3, 2003-04-20 14:45:10-07:00, torvalds@penguin.transmeta.com
Update ensoniq driver to return whether the interrupt was for it
or not.
ChangeSet@1.1118.6.32, 2003-04-20 14:43:34-07:00, hch@lst.de
[PATCH] devfs: warn on block modes in devfs_register
ChangeSet@1.1118.6.31, 2003-04-20 14:43:26-07:00, hch@lst.de
[PATCH] devfs: kill devfs_register_partition
ChangeSet@1.1118.6.30, 2003-04-20 14:43:19-07:00, hch@lst.de
[PATCH] devfs: md
ChangeSet@1.1118.6.29, 2003-04-20 14:43:11-07:00, hch@lst.de
[PATCH] devfs: device-mapper
ChangeSet@1.1118.6.28, 2003-04-20 14:43:04-07:00, hch@lst.de
[PATCH] devfs: floppy
The following patches switch the few drivers that have to register
devfs entries independand of gendisks to devfs_mk_bdev.
ChangeSet@1.1118.6.27, 2003-04-20 14:42:56-07:00, hch@lst.de
[PATCH] devfs: xpram
ChangeSet@1.1118.6.26, 2003-04-20 14:42:48-07:00, hch@lst.de
[PATCH] devfs: mtdblock
ChangeSet@1.1118.6.25, 2003-04-20 14:42:40-07:00, hch@lst.de
[PATCH] devfs: sonycd
ChangeSet@1.1118.6.24, 2003-04-20 14:42:31-07:00, hch@lst.de
[PATCH] devfs: sjcd
ChangeSet@1.1118.6.23, 2003-04-20 14:42:24-07:00, hch@lst.de
[PATCH] devfs: optcd
ChangeSet@1.1118.6.22, 2003-04-20 14:42:15-07:00, hch@lst.de
[PATCH] devfs: gscd
ChangeSet@1.1118.6.21, 2003-04-20 14:42:07-07:00, hch@lst.de
[PATCH] devfs: aztcd
ChangeSet@1.1118.6.20, 2003-04-20 14:42:00-07:00, hch@lst.de
[PATCH] devfs: swim3
ChangeSet@1.1118.6.19, 2003-04-20 14:41:52-07:00, hch@lst.de
[PATCH] devfs: rd
ChangeSet@1.1118.6.18, 2003-04-20 14:41:44-07:00, hch@lst.de
[PATCH] devfs: nbd
ChangeSet@1.1118.6.17, 2003-04-20 14:41:36-07:00, hch@lst.de
[PATCH] devfs: loop
This and the next patches switches over drivers to gendisk.devfs_name.
ChangeSet@1.1118.6.16, 2003-04-20 14:41:28-07:00, hch@lst.de
[PATCH] devfs: gendisk.devfs_name updates
Previously gendisk.devfs_name was used only for partitioned devices
or CDroms, and for the latter it was slightly broken. Fix it to
work genericly for all gendisks.
ChangeSet@1.1118.6.15, 2003-04-20 14:41:20-07:00, hch@lst.de
[PATCH] devfs: introduce devfs_mk_bdev
Replaces devfs_register for block devices. Note that we do NOT pass in
an operaion vector here - it was unused in devfs_register already
and our block device code fundamentally ties the operations to the
gendisk. There will be only very few callers of this one anyway..
ChangeSet@1.1118.6.14, 2003-04-20 14:41:11-07:00, hch@lst.de
[PATCH] devfs: superflous devfs_remove in scsi
Already handled by the gendisk layer.
ChangeSet@1.1118.6.13, 2003-04-20 14:41:04-07:00, hch@lst.de
[PATCH] devfs: remove dead devfs code in dasd
Dasd is partitioned - all devfs stuff is handled by the gendisk layer.
ChangeSet@1.1118.6.12, 2003-04-20 14:40:56-07:00, hch@lst.de
[PATCH] devfs: switch over ubd to ->devfs_name
Duh, ubd is partitioned.
ChangeSet@1.1118.6.11, 2003-04-20 14:40:48-07:00, hch@lst.de
[PATCH] devfs: remove devfs_unregister
ChangeSet@1.1118.6.10, 2003-04-20 14:40:40-07:00, hch@lst.de
[PATCH] devfs: uml
ChangeSet@1.1118.6.9, 2003-04-20 14:40:32-07:00, hch@lst.de
[PATCH] devfs: swim3
ChangeSet@1.1118.6.8, 2003-04-20 14:40:25-07:00, hch@lst.de
[PATCH] devfs: ipmi
ChangeSet@1.1118.6.7, 2003-04-20 14:40:17-07:00, hch@lst.de
[PATCH] devfs: s390
ChangeSet@1.1118.6.6, 2003-04-20 14:40:08-07:00, hch@lst.de
[PATCH] devfs: miscdev
ChangeSet@1.1118.6.5, 2003-04-20 14:40:00-07:00, hch@lst.de
[PATCH] devfs: videodev
ChangeSet@1.1118.6.4, 2003-04-20 14:39:52-07:00, hch@lst.de
[PATCH] devfs: sound
ChangeSet@1.1118.6.3, 2003-04-20 14:39:44-07:00, hch@lst.de
[PATCH] devfs: usb
ChangeSet@1.1118.6.2, 2003-04-20 14:39:36-07:00, hch@lst.de
[PATCH] devfs: dvb
ChangeSet@1.1118.6.1, 2003-04-20 14:39:29-07:00, hch@lst.de
[PATCH] devfs: input
Make sure input always uses devfs_remove. While at it I've also
remove lots of code duplication - every upper input driver contained
the code surrounding devfs_unregister in two identical copies.
ChangeSet@1.1118.5.39, 2003-04-20 14:34:45-07:00, akpm@digeo.com
[PATCH] fbdev build fix
- fb_prepare_logo() is calling the undefined find_logo(). I think it wants
fb_find_logo().
- fb_prepare_logo is not __init, therefore fb_find_logo() cannot be __init.
ChangeSet@1.1118.5.38, 2003-04-20 14:30:01-07:00, akpm@digeo.com
[PATCH] Aggregated disk statistics
From: Rick Lindsley <ricklind@us.ibm.com>
To access all the system's disk statitics we currently need to access one
sysfs file per disk. This clearly will not be acceptable with thousands of
disks.
The patch aggregates the system-wide statistics in real time and exposes them
via /proc/diskstats
ChangeSet@1.1118.5.37, 2003-04-20 14:29:55-07:00, akpm@digeo.com
[PATCH] Fix nfsctl for larger dev_t
From: Andries.Brouwer@cwi.nl
The old NFS control interface passes dev_t's in from userspace. This patch
keeps it working when the size of dev_t changes.
This is a deprecated interface - new nfs-utils uses an ascii representation
in exportfs.
Acked by Neil.
ChangeSet@1.1118.5.36, 2003-04-20 14:29:47-07:00, akpm@digeo.com
[PATCH] smbfs: larger dev_t preparation
Discard fewer bits of the device number recd with smb.
This does not depend on anything else.
Andries
ChangeSet@1.1118.5.35, 2003-04-20 14:29:39-07:00, akpm@digeo.com
[PATCH] prepare device mapper for larger dev_t
From: Joe Thornber <thornber@sistina.com>
The only other thing that will need changing in dm to cope with 64bit
dev_t concerns the bitset I'm using to keep track of allocated minor
numbers. A trivial patch like this would work for now:
ChangeSet@1.1118.5.34, 2003-04-20 14:29:32-07:00, akpm@digeo.com
[PATCH] don't shrink slab for highmem allocations
From: William Lee Irwin III <wli@holomorphy.com>
If one's goal is to free highmem pages, shrink_slab() is an ineffective
method of recovering them, as slab pages are all ZONE_NORMAL or ZONE_DMA.
Hence, this "FIXME: do not do for zone highmem". Presumably this is a
question of policy, as highmem allocations may be satisfied by reaping slab
pages and handing them back; but the FIXME says what we should do.
ChangeSet@1.1118.5.33, 2003-04-20 14:29:25-07:00, akpm@digeo.com
[PATCH] Extend map_vm_area()/get_vm_area()
From: Christoph Hellwig <hch@infradead.org> and David M-T
The ia64 port can use vmap(), but needs to be able to specify the protection
flags and the resulting vma's vm_flags.
The patch adds the two extra args to vmap(), updates the two callers and
fixes some comment spellos.
ChangeSet@1.1118.5.32, 2003-04-20 14:29:19-07:00, akpm@digeo.com
[PATCH] fix CONFIG_NOMMU mismerges
From: Christoph Hellwig <hch@lst.de>
we already have better stubs in nommu.c, the additional inlines in mm.h only
cause compile failures.
ChangeSet@1.1118.5.31, 2003-04-20 14:29:12-07:00, akpm@digeo.com
[PATCH] Allocate hd_structs dynamically
From: Badari Pulavarty <pbadari@us.ibm.com>
Here is the patch to allocate hd_struct dynamically as we find
partitions.
There are 3 things I didn't like in the patch.
1) The patch allocates 15 pointers instead of 15 hd_structs. (incase of
s= csi). I was really hoping to get rid of "15" and make it really
dynamic. (In ca= se if we ever want to support more than 15 partitions
per disk etc..).=20 I was thought about making it a linked list, but
blk_partition_remap() needs to get to hd_struct for a given partition
everytime we do IO. So linked list would be bad, we really need direct
access to partition in= fo.
2) I had to add "partno" to hd_struct, since part_dev_read() used to calc=
ulate partition number from the address before.
3) kmalloc() failure in add_partition() will be silently ignored.
It saves 2048 bytes per disk.
ChangeSet@1.1118.5.30, 2003-04-20 14:29:05-07:00, akpm@digeo.com
[PATCH] shm_get_stat-handle-hugetlb-pages.patch
From: William Lee Irwin III <wli@holomorphy.com>
shm_get_stat() didn't know about hugetlbpage-backed shm.
ChangeSet@1.1118.5.29, 2003-04-20 14:28:59-07:00, akpm@digeo.com
[PATCH] DAC960: add call to blk_queue_bounce_limit
From: Dave Olien <dmo@osdl.org>
The following patch adds a call to blk_queue_bounce_limit to the DAC960
driver. Otherwise, it uses bounce buffering more than it needs to.
ChangeSet@1.1118.5.28, 2003-04-20 14:28:52-07:00, akpm@digeo.com
[PATCH] oom-kill: preferentially kill swapoff
From: Hugh Dickins <hugh@veritas.com>
The current behaviour is that once swapoff has filled memory, other tasks get
OOMkilled one by one until swapoff completes, or more likely hangs. It is
better that swapoff be the first choice for OOMkill.
The patch changes the oom-killer so that it will kill off any
currently-running swapoff instance before killing any other task.
(Bit kludgy, couldn't think of a better way)
ChangeSet@1.1118.5.27, 2003-04-20 14:28:45-07:00, akpm@digeo.com
[PATCH] Permit interruption of swapoff
From: Hugh Dickins <hugh@veritas.com>
Sometimes you start a swapoff and, seeing how long it takes, wish you had
not: allow signal to interrupt and stop swapoff.
ChangeSet@1.1118.5.26, 2003-04-20 14:28:39-07:00, akpm@digeo.com
[PATCH] Disallow swapoff if there is insufficient memory
From: Hugh Dickins <hugh@veritas.com>
First of three small "stop swapoff" patches based on 2.5.67-mm3:
stop swapoff 1/3 vm_enough_memory?
Before embarking upon swapoff, check vm_enough_memory. Mainly
for consistency in the overcommit_memory 2 (strict accounting) case:
fail with -ENOMEM if it wouldn't let the amount removed be committed.
Will always succeed in the overcommit_memory 1 case, as it should in
root-shoot-foot mode. In the overcommit_memory 0 case, well, I don't
care much either way, so opted for the simplest code: no special case.
Which means it could now fail at the start; but that's unlikely (case 0
is over-generous) and only when it would have got stuck later on anyway.
ChangeSet@1.1118.5.25, 2003-04-20 14:28:32-07:00, akpm@digeo.com
[PATCH] use __GFP_REPEAT in pmd_alloc_one()
Convert all pmd_alloc_one() implementations to use __GFP_REPEAT
ChangeSet@1.1118.5.24, 2003-04-20 14:28:25-07:00, akpm@digeo.com
[PATCH] use __GFP_REPEAT in pte_alloc_one()
Remove all the open-coded retry loops in various architectures, use
__GFP_REPEAT.
It could be that at some time in the future we change __GFP_REPEAT to give up
after ten seconds or so, so all the checks for failed allocations are
retained.
ChangeSet@1.1118.5.23, 2003-04-20 14:28:19-07:00, akpm@digeo.com
[PATCH] make alloc_buffer_head take gfp_flags
- alloc_buffer_head() should take the allocation mode as an arg, and not
assume.
- Use __GFP_NOFAIL in JBD's call to alloc_buffer_head().
- Remove all the retry code from jbd_kmalloc() - do it via page allocator
controls.
ChangeSet@1.1118.5.22, 2003-04-20 14:28:12-07:00, akpm@digeo.com
[PATCH] implement __GFP_REPEAT, __GFP_NOFAIL, __GFP_NORETRY
This is a cleanup patch.
There are quite a lot of places in the kernel which will infinitely retry a
memory allocation.
Generally, they get it wrong. Some do yield(), the semantics of which have
changed over time. Some do schedule(), which can lock up if the caller is
SCHED_FIFO/RR. Some do schedule_timeout(), etc.
And often it is unnecessary, because the page allocator will do the retry
internally anyway. But we cannot rely on that - this behaviour may change
(-aa and -rmap kernels do not do this, for instance).
So it is good to formalise and to centralise this operation. If an
allocation specifies __GFP_REPEAT then the page allocator must infinitely
retry the allocation.
The semantics of __GFP_REPEAT are "try harder". The allocation _may_ fail
(the 2.4 -aa and -rmap VM's do not retry infinitely by default).
The semantics of __GFP_NOFAIL are "cannot fail". It is a no-op in this VM,
but needs to be honoured (or fix up the callers) if the VM ischanged to not
retry infinitely by default.
The semantics of __GFP_NOREPEAT are "try once, don't loop". This isn't used
at present (although perhaps it should be, in swapoff). It is mainly for
completeness.
ChangeSet@1.1118.5.21, 2003-04-20 14:28:04-07:00, akpm@digeo.com
[PATCH] shmdt() speedup
From: William Lee Irwin III <wli@holomorphy.com>
Micro-optimize sys_shmdt(). There are methods of exploiting knowledge
of the vma's being searched to restrict the search space. These are:
(1) shm mappings always start their lives at file offset 0, so only
vma's above shmaddr need be considered. find_vma() can be used
to seek to the proper position in mm->mmap in O(lg(n)) time.
(2) The search is for a vma which could be a fragment of a broken-up
shm mapping, which would have been created starting at shmaddr
with vm_pgoff 0 and then continued no further into userspace
than shmaddr + size. So after having found an initial vma, find
the size of the shm segment it maps to calculate an upper bound
to the virtualspace that needs to be searched.
(3) mremap() would have caused the original checks to miss vma's mapping
the shm segment if shmaddr were the original address at which
the shm segments were attached. This does no better and no worse
than the original code in that situation.
(4) If the chain of references in vma->vm_file->f_dentry->d_inode->i_size
is not guaranteed by refcounting and/or the shm code then this is
oopsable; AFAICT an inode is always allocated.
ChangeSet@1.1118.5.20, 2003-04-20 14:27:57-07:00, akpm@digeo.com
[PATCH] AIO mmap fix
From: Badari Pulavarty <pbadari@us.ibm.com>
Here is a small bug fix for AIO. get_user_pages() takes number
of pages to map as argument. (not in bytes)
ChangeSet@1.1118.5.19, 2003-04-20 14:27:50-07:00, akpm@digeo.com
[PATCH] quotactl(): sync all quotas
From: Jan Kara <jack@suse.cz>
I'm resending a patch which implements quotactl(2) call for syncing
all devices. Particulary it allows the caller not to specify the device
for syncing and in that case quotas on all the devices are written.
The patch is rather trivial (mostly moving the code).
ChangeSet@1.1118.5.18, 2003-04-20 14:27:44-07:00, akpm@digeo.com
[PATCH] ATI Mach64 build fix
From: Geert Uytterhoeven <geert@linux-m68k.org>
Atyfb: Add missing parts of reversal of Mobility changes, allowing ATI Mach64
GX support to compile again.
ChangeSet@1.1118.5.17, 2003-04-20 14:27:37-07:00, akpm@digeo.com
[PATCH] hugetlb math overflow fix
From: William Lee Irwin III <wli@holomorphy.com>
And this one fixes an overflow when there is more than 4GB of hugetlb.
ChangeSet@1.1118.5.16, 2003-04-20 14:27:30-07:00, akpm@digeo.com
[PATCH] follow_hugetlb_page fix
From: William Lee Irwin III <wli@holomorphy.com>
follow_hugetlb_page() drops out of the loop prematurely and fails to take the
appropriate refcounts if its starting address was not hugepage-aligned.
It looked a bit unclean too, so I rewrote it. This fixes a bug, and more
importantly, makes the thing readable by something other than a compiler
(e.g. programmers).
ChangeSet@1.1118.5.15, 2003-04-20 14:27:23-07:00, akpm@digeo.com
[PATCH] Clean up various buffer-head dependencies
From: William Lee Irwin III <wli@holomorphy.com>
Remove page_has_buffers() from various functions, document the dependencies
on buffer_head.h from other files besides filemap.c, and s/this file/core VM/
in filemap.c
ChangeSet@1.1118.5.14, 2003-04-20 14:27:14-07:00, akpm@digeo.com
[PATCH] Move __set_page_dirty_buffers to fs/buffer.c
From: William Lee Irwin III <wli@holomorphy.com>
Move __set_page_dirty_buffers() to fs/buffer.c, as per the FIXME.
ChangeSet@1.1118.5.13, 2003-04-20 14:27:09-07:00, akpm@digeo.com
[PATCH] Turn on NUMA rebalancing
From: "Martin J. Bligh" <mbligh@aracnet.com>
I'd forgotten that I'd set this to only fire every 20s in the past, because
it would rebalance too agressively. That seems to be fixed now, so we should
turn it back on.
ChangeSet@1.1118.5.12, 2003-04-20 14:27:02-07:00, akpm@digeo.com
[PATCH] Make PCI scanning order the same as 2.4
From: Chuck Ebbert <76306.1226@compuserve.com>
2.4 builds its global PCI device list in breadth-first order.
2.5 is doing the scan that way but defers the construction of the global list
until later and then does it depth-first. This causes devices to found in
different order by drivers. The below fixed that problem for me.
Russell King has acked this change.
ChangeSet@1.1118.5.11, 2003-04-20 14:26:55-07:00, akpm@digeo.com
[PATCH] keyboard.c Fix SAK in raw mode
From: Chris Heath <chris@heathens.co.nz>
Trivial fix to get the SAK key working in raw and medium raw modes. Patch is
against kernel 2.5.67.
ChangeSet@1.1118.5.10, 2003-04-20 14:26:49-07:00, akpm@digeo.com
[PATCH] Minor fix for driver/serial/core.c
From: Jean Tourrilhes <jt@bougret.hpl.hp.com>
The following command will do nothing at all on 2.5.X :
setserial /dev/ttyS0 uart none
ChangeSet@1.1118.5.9, 2003-04-20 14:26:42-07:00, akpm@digeo.com
[PATCH] detect_lost_tick locking fixes
From: john stultz <johnstul@us.ibm.com>
This patch fixes a race in the timer_interrupt code caused by
detect_lost_tick(). Since we're doing lost-tick compensation outside
timer->mark_offset, time can pass between time-source reads which can cause
gettimeofday inconsistencies.
Additionally detect_lost_tick() was broken for the PIT case, since the whole
point of detect_lost_tick() is to interpolate between two time sources to
find inconsistencies. Additionally this could cause xtime_lock seq_lock
reader starvation which has been causing machine hangs for SMP boxes that use
the PIT as a time source.
This patch fixes the described race by removing detect_lost_tick() and
instead implementing the lost tick detection code inside mark_offset().
Some of the divs and mods being added here might concern folks, but by not
calling timer->get_offset() in detect_lost_tick() we eliminate much of the
same math. I did some simple cycle counting and the new code comes out on
average equivalent or faster.
ChangeSet@1.1118.5.8, 2003-04-20 14:26:34-07:00, akpm@digeo.com
[PATCH] get_offset_pit and do_timer_overflow vs IRQ locking
From: john stultz <johnstul@us.ibm.com>, Alexander Atanasov <alex@ssi.bg>
We want to make sure we update jiffies_p and count_p atomically. So I'm
inserting the spin_unlock_irqrestore() after we update count_p, rather then
just before.
ChangeSet@1.1118.5.7, 2003-04-20 14:26:28-07:00, akpm@digeo.com
[PATCH] Fix jiffies_to_time[spec | val] and converse to use
From: george anzinger <george@mvista.com>
In the current system (2.5.67) time_spec to jiffies, time_val to
jiffies and the converse (jiffies to time_val and jiffies to
time_spec) all use 1/HZ as the measure of a jiffie. Because of the
inability of the PIT to actually generate an accurate 1/HZ interrupt,
the wall clock is updated with a more accurate value (999848
nanoseconds per jiffie for HZ = 1000). This causes a 1/HZ
interpretation of jiffies based timing to run faster than the wall
clock, thus causing sleeps and timers to expire short of the requested
time. Try, for example:
time sleep 60
This patch changes the conversion routines to use the same value as
the wall clock update code to do the conversions.
The actual math is almost all done at compile time. The run time
conversions require little if any more execution time.
This patch must be applied after the patch I posted earlier today
which fixed the CLOCK_MONOTONIC resolution issue.
ChangeSet@1.1118.5.6, 2003-04-20 14:26:21-07:00, akpm@digeo.com
[PATCH] Fix POSIX timers to give CLOCK_MONOTONIC full
The POSIX CLOCK_MONOTONIC currently has only 1/HZ resolution. Further, it is
tied to jiffies (i.e. is a restatment of jiffies) rather than "xtime" or the
gettimeofday() clock.
This patch changes CLOCK_MONOTONIC to be a restatment of gettimeofday() plus
an offset to remove any clock setting activity from CLOCK_MONOTONIC. An
offset is kept that represents the difference between CLOCK_MONOTONIC and
gettimeofday(). This offset is updated when ever the gettimeofday() clock is
set to back the clock setting change out of CLOCK_MONOTONIC (which by the
standard, can not be set).
With this change CLOCK_REALTIME (a direct restatement of gettimeofday()),
CLOCK_MONOTONIC and gettimeofday() will all tick at the same time and with
the same rate. And all will be affected by NTP adjustments (save those which
actually set the time).
ChangeSet@1.1118.5.5, 2003-04-20 14:26:14-07:00, akpm@digeo.com
[PATCH] Fix and clean up DCACHE_REFERENCED usage
From: Maneesh Soni <maneesh@in.ibm.com>
This patch changes the way DCACHE_REFERENCED flag is used. It
got messed up in dcache_rcu iterations. I hope this will be ok now.
The flag was meant to be advisory flag which is used while
prune_dcache() so as not to free dentries which have recently
entered d_lru list. At first pass in prune_dcache the dentries
marked DCACHE_REFERENCED are left with the flag reset. and they
are freed in the next pass.
So, now we mark the dentry as DCACHE_REFERENCED when it is first
entering the d_lru list in dput() and resetthe flag in prune_dcache().
If the flag remains reset in the next call to prune_dcache(), the
dentry is then freed.
Also I don't think any file system have to use this flag as it is taken
care by the dcache layer. The patch removes such code from a few of file
systems. Moreover these filesystems were anyway doing worng thing as they
were changing the flag out of dcache_lock.
Changes:
o dput() marks dentry DCACHE_REFERENCED when it is added to the dentry_unused
list
o no need to set the flag in dget, dget_locked, d_lookup as these guys anyway
increments the ref count.
o check the ref count in prune_dcache and use DCACHE_REFERENCED flag just for
two stage aging.
o remove code for setting DACACHE_REFERENCED from reiserfs, fat, xfs and
exportfs.
ChangeSet@1.1118.5.4, 2003-04-20 14:26:07-07:00, akpm@digeo.com
[PATCH] dentry_stat accounting fix
From: Maneesh Soni <maneesh@in.ibm.com>
This patch the corrects the dentry_stat.nr_unused calculation.
In select_parent() and shrink_dcache_anon() we were not doing any adjustments
to the nr_unused count after manipulating the dentry_unused list. Now the
nr_unused count is decremented if the dentry is on dentry_unused list and is
removed from there.
Further in the same routines, we have to adjust the nr_unused count again if
the dentry is moved to the end of d_lru list for pruning.
ChangeSet@1.1118.5.3, 2003-04-20 14:26:00-07:00, akpm@digeo.com
[PATCH] dmfe: don't free skb with local interrupts disabled
dev_kfree_skb() can end up calling local_bh_enable() which goes BUG if local
interrupts are disabled. Apparently it can deadlock.
So move the skb freeing outside the lock in the dmfe driver. It will
decrease the lock hold time as well.
ChangeSet@1.1118.5.2, 2003-04-20 14:25:54-07:00, akpm@digeo.com
[PATCH] Fix nc98 partition parser link error
Fix this:
fs/partitions/nec98.c:169: undefined reference to `parse_bsd'
ChangeSet@1.1118.5.1, 2003-04-20 14:25:47-07:00, akpm@digeo.com
[PATCH] 3c574_cs fixes
- It was doing spin_lock_irqsave()/spin_unlock()
- Can't free the skb inside local_irq_save(): kfree_skb ends up running
local_bh_enable(), which enables interrupts.
ChangeSet@1.1118.4.2, 2003-04-20 14:14:34-07:00, torvalds@home.transmeta.com
Interrupt handlers should return whether the interrupt
was for them or not, so that the irq subsystem can properly
handle screaming shared interrupts.
So change the irq handlers to return a "irqretval_t", which
is either IRQ_HANDLED or IRQ_NONE.
ChangeSet@1.1118.4.1, 2003-04-20 14:12:21-07:00, torvalds@home.transmeta.com
Fix-ups for i830 from Arjan
ChangeSet@1.1118.3.2, 2003-04-20 12:18:42-04:00, jgarzik@redhat.com
[rcpci45] typo fix: s/virual/virtual/
ChangeSet@1.1118.3.1, 2003-04-20 12:10:07-04:00, jgarzik@redhat.com
Modernize rcpci45 I2O LAN driver (#204):
* Convert to PCI DMA mapping API (Francios Romieu). Gets driver
compiling again. Fixes bugzilla bug #204.
* use SET_MODULE_OWNER
* remove MOD_*_USE_COUNT from all but one place
(and add FIXME to that one place)
* fix printk in rclanmtl.c, though more work is needed
ChangeSet@1.1118.1.10, 2003-04-20 00:57:31-07:00, davem@nuts.ninka.net
[PKT_SCHED]: Proper module refcounting for packet schedulers.
ChangeSet@1.1118.1.9, 2003-04-20 00:25:42-07:00, davem@nuts.ninka.net
[PKT_SCHED]: Proper module refcounting for packet classifiers.
ChangeSet@1.1118.1.8, 2003-04-19 20:42:38-07:00, yoshfuji@linux-ipv6.org
[IPSEC]: nexthdr in xfrm6_input needs to be int.
ChangeSet@1.1118.1.6, 2003-04-19 19:39:11-07:00, torvalds@home.transmeta.com
Linux 2.5.68
TAG: v2.5.68