ChangeSet@1.1350, 2003-09-20 19:44:15-07:00, torvalds@home.osdl.org
Don't ask about SERIO selection - let Kconfig select it
automatically as needed.
ChangeSet@1.1347.3.1, 2003-09-20 20:39:42-04:00, jgarzik@redhat.com
[sound/oss i810_audio] sync with 2.4
* increase length of wait for analog-ready
* fix printk prefix (cosmetic)
* bail out for pure MMIO interfaces, instead of attempting to use it
via PIO and hanging the system.
ChangeSet@1.1347.1.41, 2003-09-20 17:10:07-07:00, torvalds@home.osdl.org
Avoid type warning for bit operation in atkbd.c
ChangeSet@1.1347.2.1, 2003-09-20 16:51:41-07:00, torvalds@home.osdl.org
Merge bk://kernel.bkbits.net/vojtech/input
into home.osdl.org:/home/torvalds/v2.5/linux
ChangeSet@1.1347.1.39, 2003-09-20 15:10:14-04:00, shemminger@osdl.org
[PATCH] Road Runner HIPPI driver (rrunner)
Small clean up, to use current APIs.
ChangeSet@1.1347.1.38, 2003-09-20 15:08:21-04:00, achirica@telefonica.net
[wireless airo] Fix MIC support with CryptoAPI
ChangeSet@1.1347.1.37, 2003-09-20 15:06:32-04:00, achirica@telefonica.net
[wireless airo] fix PCI probe
ChangeSet@1.1347.1.36, 2003-09-20 15:03:43-04:00, jochen@scram.de
[tokenring] fix breakage in proteon, skisa
this one fixes both drivers. They have been broken since the
reorganization in June. Unfortunately, my major build platform (alpha) had
some issues with later 2.5.X kernels (cache problems causing all kind of
funny behaviour), so i waited until these problems had been resolved by
the alpha gurus :-/...
In the mean time i also upgraded pine. I hope the patch corruption issue
is resolved by now.
ChangeSet@1.1347.1.35, 2003-09-20 15:02:24-04:00, shemminger@osdl.org
[PATCH] hamradio/scc -
Update hamradio/scc for 2.6.0-test5
- use seq_file for /proc
- get rid of dev_get()
- use alloc_netdev
Don't have hardware, but can load/unload the module fine.
ChangeSet@1.1347.1.34, 2003-09-20 14:49:10-04:00, amir.noam@intel.com
[PATCH] [bonding] Convert /proc to seq_file
This patch converts /proc/net/bondX/info into /proc/net/bonding/bondX
using the seq_file interface.
This is based on Stephen's recent patch, but slightly modified to work
with the propagation patch set and with some locking changes to make it
simpler.
The patch applies both on 2.4 (after the sync set from earlier today)
and on 2.6 (after the propagation set from 2003/11/9).
Amir
ChangeSet@1.1347.1.33, 2003-09-20 14:49:01-04:00, bunk@fs.tum.de
[PATCH] fix sbni.c compile with gcc 3.3
sbni.c in 2.6.0-test5 fails to compile with gcc 3.3 with the following
error:
<-- snip -->
...
CC drivers/net/wan/sbni.o
...
drivers/net/wan/sbni.c: In function `calc_crc32':
drivers/net/wan/sbni.c:1568: error: asm-specifier for variable `_crc'
conflicts with asm clobber list
make[3]: *** [drivers/net/wan/sbni.o] Error 1
<-- snip -->
Below is the patch by Margit Schubert-White to fix this issue (it is
already in 2.4).
cu
Adrian
ChangeSet@1.1347.1.32, 2003-09-20 14:48:53-04:00, akpm@osdl.org
[PATCH] e1000 bug
Rick Lindsley <ricklind@us.ibm.com> wrote:
>
> since it's been out for a while you probably already know, but the patch
> for e1000_main.c has a bug in it. Looks like it will fail at line 1550 if
> compiled with NETIF_F_TSO defined.
>
So it will. I blame the gcc developers.
25-akpm/drivers/net/e1000/e1000_main.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)
ChangeSet@1.1347.1.31, 2003-09-20 14:15:22-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] Fix ipx_hdr compile error
ChangeSet@1.1347.1.30, 2003-09-20 14:15:15-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] Add missing free_netdev()
ChangeSet@1.1347.1.29, 2003-09-20 14:15:07-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] Enhance netdev notification handling
ChangeSet@1.1347.1.28, 2003-09-20 14:14:59-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] Consolidate /proc code, add CHANGENAME handler
ChangeSet@1.1347.1.27, 2003-09-20 14:14:52-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] Add support for changing HW address in ALB/TLB modes
ChangeSet@1.1347.1.26, 2003-09-20 14:14:44-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] Add support for changing HW address and MTU
ChangeSet@1.1347.1.25, 2003-09-20 14:14:36-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] Decouple promiscuous handling from multicast mode setting
ChangeSet@1.1347.1.24, 2003-09-20 14:14:29-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] fix assign_current_slave
ChangeSet@1.1347.1.23, 2003-09-20 14:14:21-04:00, amir.noam@intel.com
[PATCH] [bonding 2.6] consolidate change_active operations
ChangeSet@1.1347.1.22, 2003-09-20 14:13:00-04:00, shemminger@osdl.org
[PATCH] update arcnet/pcmcia driver
Redo of earlier patch to get rid of MOD_INC/DEC and use alloc_netdev.
This is against 2.6.0-test5 bk latest.
ChangeSet@1.1347.1.21, 2003-09-20 14:12:52-04:00, shemminger@osdl.org
[PATCH] sealevel wan driver
Update sealevel driver to match current net_device interface:
- dynamically allocate netdevice and private data.
- get rid of MOD_INC/DEC
- if_ptr not used
- bugfix: not all of board structure was being zeroed.
Note: this driver still doesn't probe() correctly since it just assumes that
if loaded the hardware is there!
Since I don't have one of these boards...
tested it by #ifdef'ing out all the bits that touch actual hardware.
ChangeSet@1.1347.1.20, 2003-09-20 14:06:08-04:00, shemminger@osdl.org
[IrDA] ali-ircc -- dev_alloc cleanout
Convert ali-ircc driver to:
- use alloc_net_dev not dev_alloc
- allocate private data at same time
- cleanup error unwinds
- call free_netdev.
Builds and loads, but don't have real hardware.
ChangeSet@1.1347.1.19, 2003-09-20 14:06:01-04:00, shemminger@osdl.org
[IrDA] via-ircc -- dev_alloc cleanout
Convert via-ircc 2.6.0-test5
- use alloc_net_dev not dev_alloc
- allocate private data at same time
- cleanup error unwinds
- call free_netdev.
Builds and loads, but don't have real hardware.
ChangeSet@1.1347.1.18, 2003-09-20 14:05:53-04:00, shemminger@osdl.org
[IrDA] nsc-ircc -- dev_alloc cleanout
Cleanup nsc-ircc driver for 2.6.0-test5
- replace dev_alloc with alloc_netdev
- use private data allocated with alloc_netdev
- error unwind cleanup
ChangeSet@1.1347.1.17, 2003-09-20 14:05:46-04:00, shemminger@osdl.org
[IrDA] donahoboe -- dev_alloc cleanout
Fixes for donauboe for 2.6.0-test5
- replace dev_alloc with alloc_netdev
- error unwind cleanup
ChangeSet@1.1347.1.16, 2003-09-20 14:05:38-04:00, shemminger@osdl.org
[IrDA] w83977af -- dev_alloc cleanout
Yet another irda driver cleanup for 2.6.0-test5
- replace dev_alloc with alloc_netdev
- use private data allocated with alloc_netdev
- use free_netdev
ChangeSet@1.1347.1.15, 2003-09-20 14:05:31-04:00, shemminger@osdl.org
[IrDA] irda-usb -- dev_alloc cleanout
Update irda-usb for 2.6.0-test5
- use alloc_netdev (but can't use dev->priv area cause that is allocated elsewhere).
ChangeSet@1.1347.1.14, 2003-09-20 14:00:00-04:00, rddunlap@osdl.org
[PATCH] janitor: ns83820 error handling
Subject: Re: [Kernel-janitors] [PATCH] insert missing free_irq and fix cleanup path
From: Leann Ogasawara <ogasawara@osdl.org>
On Thu, 2003-09-04 at 13:17, Benjamin LaHaise wrote:
> The if()s before free are redundant, turf them and it's good.
ChangeSet@1.1347.1.13, 2003-09-20 13:59:53-04:00, rddunlap@osdl.org
[PATCH] janitor: insert a missing iounmap()
From: Leann Ogasawara <ogasawara@osdl.org>
Subject: [Kernel-janitors] [PATCH] insert missing iounmap()
Patch inserts a missing iounmap().
ChangeSet@1.1347.1.12, 2003-09-20 13:59:45-04:00, shemminger@osdl.org
[PATCH] get rid of old IRDA drivers.
According to Jean the toshoboe and old smc ircc drivers are no longer needed.
This patch removes them from 2.6.0-test5
ChangeSet@1.1347.1.11, 2003-09-20 13:59:37-04:00, chrisw@osdl.org
[netdrvr] use cpu_relax() in busy loop, or mdelay instead of busy loop
Replace busy loop nop with cpu_relax(), and just use mdelay where it's better.
ChangeSet@1.1347.1.10, 2003-09-20 13:56:15-04:00, rddunlap@osdl.org
[PATCH] janitor: remove (or add) unneeded includes (drivers/net/)
From: Randy Hron <rwhron@earthlink.net>
ChangeSet@1.1347.1.9, 2003-09-20 13:56:07-04:00, rddunlap@osdl.org
[PATCH] janitor: remove unneeded includes (hamradio)
From: Randy Hron <rwhron@earthlink.net>
ChangeSet@1.1347.1.8, 2003-09-20 13:56:00-04:00, rddunlap@osdl.org
[PATCH] janitor: remove (or add) unneeded includes (wireless)
From: Randy Hron <rwhron@earthlink.net>
ChangeSet@1.1347.1.7, 2003-09-20 13:55:52-04:00, rddunlap@osdl.org
[PATCH] janitor: remove unneeded includes (skfp)
From: Randy Hron <rwhron@earthlink.net>
ChangeSet@1.1347.1.6, 2003-09-20 13:55:45-04:00, rddunlap@osdl.org
[PATCH] janitor: remove (or add) unneeded includes
From: Randy Hron <rwhron@earthlink.net>
ChangeSet@1.1347.1.5, 2003-09-20 13:55:37-04:00, rddunlap@osdl.org
[PATCH] janitor: remove unneeded includes (sk98lin)
From: Randy Hron <rwhron@earthlink.net>
ChangeSet@1.1347.1.4, 2003-09-20 13:55:29-04:00, rddunlap@osdl.org
[PATCH] janitor: remove unneeded includes (tokenring)
From: Randy Hron <rwhron@earthlink.net>
ChangeSet@1.1347.1.3, 2003-09-20 13:55:21-04:00, shemminger@osdl.org
[PATCH] replace sppp_of macro with inline
Replace macro with inline and get some type checking.
ChangeSet@1.1347.1.2, 2003-09-20 13:55:14-04:00, felipewd@terra.com.br
[PATCH] Unneeded memory barrier in net/irda code
ChangeSet@1.1347.1.1, 2003-09-20 13:55:06-04:00, mzyngier@freesurf.fr
[PATCH] depca update
I finally found some time to hack the depca driver, in basically the
same way I did with the de4x5 driver. The patch is quite big (shuffles
a lot of code around, removes lots of global variables), mainly in
order to use the driver model on every bus supported by this driver.
I also removed the probing from Space.c, so the usual warning about
device renumbering applies.
Tested on alpha (DE422, EISA) and i386 (two DE201, ISA), built-in and
modular. The MCA part is completly untested, since I lack the hardware
(no, I do not own every single piece of junk hardware out
there... ;-).
ChangeSet@1.1348, 2003-09-19 16:51:20-07:00, greg@kroah.com
Merge kroah.com:/home/linux/BK/bleed-2.5
into kroah.com:/home/linux/BK/gregkh-2.6
ChangeSet@1.1315.8.30, 2003-09-19 16:28:31-07:00, dhollis@davehollis.com
[PATCH] USB: ethtool_ops and ax8817x fixes for usbnet
This is a resend of all of my recent usbnet additions which
center on adding ethtool_ops support. All have been re-diffed
against the latest usbnet from BK.
Changes:
* Add ethtool_ops support to usbnet
* Add GPIO bit toggling upon initialization of ax8817x devices
so that xmit works properly
* Add Wake-On-Lan and eeprom dump support for ax8817x devices
(this only adds the config support for WOL, actual operation
is more of a USB/Power Management function)
* Change ax8817x_set_multicast to not kmalloc for the filter
since there was no clean way to free the memory after URB submit.
Instead, we make use of the 20 byte dev->data.
ChangeSet@1.1347, 2003-09-19 14:27:20-07:00, vojtech@suse.cz
[PATCH] Fix memory leak in hiddev.c found by Stanford Checker
ChangeSet@1.1346, 2003-09-19 14:27:08-07:00, vojtech@suse.cz
[PATCH] Remove a not necessary #ifdef CONFIG_PROC_FS/#endif in input.c
ChangeSet@1.1345, 2003-09-19 14:26:50-07:00, vojtech@suse.cz
[PATCH] Fix a warning in input.c when CONFIG_PROC_FS is not set
ChangeSet@1.1342.1.1, 2003-09-19 13:49:28-07:00, torvalds@laptop.osdl.org
Merge http://lia64.bkbits.net/to-linus-2.5
into laptop.osdl.org:/home/torvalds/v2.5/linux
ChangeSet@1.1338.1.4, 2003-09-19 15:20:02-05:00, sandeen@sgi.com
[XFS] Update sysctls - use ints, not ulongs, and show pagebuf
values in jiffies like everybody else
SGI Modid: 2.5.x-xfs:slinx:158665a
ChangeSet@1.1338.1.3, 2003-09-19 14:14:55-05:00, lord@sgi.com
[XFS] Make xfs_ichgtime call mark_inode_dirty_sync instead of mark_inode_dirty
makes the just the inode look dirty, and not the inode and the data.
SGI Modid: 2.5.x-xfs:slinx:158670a
ChangeSet@1.1338.3.11, 2003-09-19 17:42:24+01:00, rmk@flint.arm.linux.org.uk
[ARM] Update bootp kernel+initrd loader.
Drop support for old param struct method, and clean up code.
ChangeSet@1.1338.3.10, 2003-09-19 17:26:49+01:00, rmk@flint.arm.linux.org.uk
[ARM] Update mach-types with latest version.
ChangeSet@1.1338.3.9, 2003-09-19 16:20:22+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix AMBA keyboard/mouse driver.
Fix the AMBA kmi driver which got broken when the name field was
removed from struct device. Change the name used to claim resources
to "kmi-pl050". Fix resume method.
ChangeSet@1.1338.3.8, 2003-09-19 15:58:18+01:00, rmk@flint.arm.linux.org.uk
[ARM] Optimise io-writesl for cpus with ldr result delays.
ChangeSet@1.1338.3.7, 2003-09-19 15:49:37+01:00, nico@org.rmk.(none)
[ARM PATCH] 1528/1: big endian support for io-readsb/io-writesb
Patch from Nicolas Pitre
ChangeSet@1.1338.3.6, 2003-09-19 15:45:48+01:00, rmk@flint.arm.linux.org.uk
[ARM] Optimise io-readsb for CPUs with delay slots after ldr.
ChangeSet@1.1338.3.5, 2003-09-19 14:50:07+01:00, rmk@flint.arm.linux.org.uk
[ARM] Place initial data/code in assembly into the correct section
We were mixing some data and code in the processor support assembly
files. Place the correct objects into their respective sections.
ChangeSet@1.1338.3.4, 2003-09-19 14:04:10+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix abort handler typo affecting Xscale CPUs.
ChangeSet@1.1324.1.2, 2003-09-19 07:38:33-05:00, nathans@sgi.com
[XFS] Fix some compile warnings and errors from some long-forgotten 2.4 mods
SGI Modid: 2.5.x-xfs:slinx:158642a
ChangeSet@1.1338.2.16, 2003-09-19 13:51:40+02:00, bunk@fs.tum.de
input: Fix Kconfig KEYBOARD_ATKBD when SERIO is modular.
ChangeSet@1.1338.2.15, 2003-09-19 13:32:38+02:00, vojtech@suse.cz
input: Fix memory leak in hiddev.c found by Stanford Checker.
ChangeSet@1.1338.2.14, 2003-09-19 13:25:06+02:00, lcapitulino@prefeitura.sp.gov.br
input: Remove a not necessary #ifdef CONFIG_PROC_FS/#endif in input.c
ChangeSet@1.1338.2.13, 2003-09-19 13:23:54+02:00, lcapitulino@prefeitura.sp.gov.br
input: Fix a warning in input.c when CONFIG_PROC_FS is not set.
ChangeSet@1.1338.2.12, 2003-09-19 13:15:12+02:00, Andries.Brouwer@cwi.nl
input: Fix Set3 keycode for right control in atkbd.c
ChangeSet@1.1338.3.3, 2003-09-19 11:55:41+01:00, rmk@flint.arm.linux.org.uk
[ARM] Correct comments for abort handler parameters.
ChangeSet@1.1338.3.2, 2003-09-19 10:03:54+01:00, rmk@flint.arm.linux.org.uk
[ARM] Remove private %_config makefile rule
ChangeSet@1.1338.3.1, 2003-09-19 09:53:36+01:00, rmk@flint.arm.linux.org.uk
[ARM] Massive rename of default configuration files.
This renames all 48 (800K-ish of) ARM default configuration files,
as required by Sam's latest default configuration file system.
ChangeSet@1.1338.2.11, 2003-09-19 01:25:39-07:00, dtor_core@ameritech.net
serio.c:
claim serio early in serio_open()
ChangeSet@1.1338.2.10, 2003-09-19 01:24:36-07:00, oliver@neukum.org
iforce-usb.c, iforce-packets.c:
Fix I-Force sleeping issues.
ChangeSet@1.1338.2.9, 2003-09-19 01:23:29-07:00, vojtech@suse.cz
psmouse-base.c:
Enlarge the timeout for PS/2 mouse full reset.
ChangeSet@1.1338.2.8, 2003-09-19 01:22:06-07:00, vojtech@suse.cz
input.h, keyboard.c, evdev.c:
Fix the INPUT_KEYCODE macro and its usage.
ChangeSet@1.1338.2.7, 2003-09-19 01:20:33-07:00, vojtech@suse.cz
psmouse-base.c:
Make sure psmouse->pktcnt is zero after passing a byte
to be processed by synaptics code.
ChangeSet@1.1338.2.6, 2003-09-19 01:19:41-07:00, vojtech@suse.cz
psmouse-base.c:
Change the name od the Synaptics protocol to SynPS/2
ChangeSet@1.1338.2.5, 2003-09-19 01:18:46-07:00, petero2@telia.com
psmouse-base.c:
Fix resume of PS/2 mouse. Uses old PM interface at the moment.
ChangeSet@1.1338.2.4, 2003-09-19 01:17:37-07:00, petero2@telia.com
Input: Big Synaptics update:
Restore synaptics pad mode on module unload.
Support Synaptics touchpads with multiple buttons.
Make Synaptics touchpad support optional.
Add passthrough support for Synaptics touchpads. [Dmitry]
Add support for old Synaptics protocol.
Set mode byte correctly for old Synaptics pads.
Fix multibutton support of Synaptics pads.
ChangeSet@1.1338.2.3, 2003-09-19 01:01:20-07:00, vojtech@suse.cz
db9.c:
input: Fix Sega Saturn pad support.
ChangeSet@1.1338.2.2, 2003-09-19 00:58:34-07:00, vojtech@suse.cz
input.c:
input: Don't set autorepeat times in core if already set by driver.
atkbd.c:
input: Automatic forced release of keys if keyrelease gets lost
ChangeSet@1.1338.2.1, 2003-09-19 00:20:17-07:00, petero2@telia.com
synaptics.c, psmouse-base.c:
input: Restore synaptics pad mode on module unload.
ChangeSet@1.1324.1.1, 2003-09-18 21:36:31-05:00, lord@jen.americas.sgi.com
[XFS] Fix initialization of inode flags from xfs inode fields.
ChangeSet@1.1342, 2003-09-18 18:58:50-07:00, Andries.Brouwer@cwi.nl
[PATCH] fix keycode for rctrl in scancode set 3
By mistake the keycode for right control in scancode set 3
was the same as that for right alt. This fixes that.
ChangeSet@1.1341, 2003-09-18 18:58:32-07:00, axboe@suse.de
[PATCH] io scheduler barrier fix
From: Nick Piggin <piggin@cyberone.com.au>
This should be the last piece to ensure correct barrier handling for AS
and DL?
ChangeSet@1.1315.8.29, 2003-09-18 14:33:50-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (9 of 9)
This patch implements the change discussed last weekend. Rather than
allocating separate memory areas for the "extra" descriptors and copying
the descriptor contents, it simply makes the "extra" pointers refer to
memory within the rawdescriptor arrays.
ChangeSet@1.1315.8.28, 2003-09-18 14:33:32-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (8 of 9)
This patch adds some extra error checking. The patch-comments list most
it. Particularly worth noting is the check on the endpoint addresses.
Since these addresses are used as indexes for the epmaxpacketin and
epmaxpacketout arrays, illegal values could result in overwriting
unrelated areas of memory.
Other noteworthy checks involve interface and alsetting numbers. Since
the old code ignored those values, of course it didn't bother to check
them. Here we make sure that the numbers lie in the proper ranges and
that there are no "missing" entries.
Add error checking and improved error messages:
Check for invalid endpoint descriptors and invalid endpoint addresses.
Check for duplicate interface/altsetting descriptors.
Check for invalid configuration descriptors.
Check for missing interface/altsetting descriptors.
ChangeSet@1.1315.8.27, 2003-09-18 14:33:14-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (7 of 9)
This patch changes the usb_parse_interface() routine so that it only
handles a single interface/altsetting descriptor at a time, rather than
trying to handle all the altsettings for an interface at once. Besides
shrinking the code slightly, this has the advantage of not requiring the
interfaces to be listed in order or all the altsetting descriptors for an
interface to be contiguous. While there probably aren't any devices that
have _discontiguous_ altsetting descriptors, there's no harm in allowing
it -- particularly since doing so provides an overall simplification.
This is another of those hard-to-read patches. It moves most of the body
of the usb_parse_interface() function out of a loop, thereby changing the
indentation level without actually altering the code.
ChangeSet@1.1315.8.26, 2003-09-18 14:15:11-07:00, greg@kroah.com
[PATCH] USB: unusual device fixup for the Y-E floppy drive.
ChangeSet@1.1315.3.7, 2003-09-18 20:55:41+01:00, davej@redhat.com
[CPUFREQ] Explicitly disable scaling we don't need in powernow-k7
The VIDC/FIDC controls could have been left at 1 from a previous call to
one of the scaling routines. Make sure we set them back to 0 to avoid
writing garbage into the scaling registers.
ChangeSet@1.1315.3.6, 2003-09-18 20:47:26+01:00, davej@redhat.com
[CPUFREQ] Powernow-k7 latency timer needs to be in values of 10ns.
We were 'slightly' off in our calculations. This increased settling
time might actually increase the stability of some setups.
ChangeSet@1.1315.3.5, 2003-09-18 20:36:26+01:00, davej@redhat.com
[CPUFREQ] Work around buggy powernow-k7 BIOSes with low settling times.
ChangeSet@1.1315.3.4, 2003-09-18 20:33:30+01:00, davej@redhat.com
[CPUFREQ] We need to set SGTC when we change powernow-k7 voltage.
ChangeSet@1.1217.3.39, 2003-09-18 12:15:04-07:00, bjorn.helgaas@hp.com
[PATCH] ia64: trivial sba_iommu patch
I'm aligning the 2.4 and 2.5 versions of arch/ia64/hp/common/sba_iommu.c
and found a couple nits in the 2.5 version. No functional change, just
whitespace, comment, and parameter name changes (and I made
one function static).
ChangeSet@1.1217.3.38, 2003-09-18 12:11:58-07:00, jes@wildopensource.com
[PATCH] ia64: fix for include/asm-ia64/acpi.h
asm/acpi.h relies on struct pci_vector_struct which is defined in
asm/system.h.
ChangeSet@1.1217.3.37, 2003-09-18 12:10:35-07:00, jes@wildopensource.com
[PATCH] ia64: include/asm-ia64/sn/router.h cleanup
Minor cleanup.
ChangeSet@1.1217.3.36, 2003-09-18 12:09:27-07:00, jes@wildopensource.com
[PATCH] ia64: sn2 header file cleanup
This patch removes a ton of pointless big endian defines for some
registers on SN2 and cleans up the #include hierachy making it include
some really big header files only when they are really needed.
ChangeSet@1.1217.3.35, 2003-09-18 12:07:24-07:00, eranian@hpl.hp.com
[PATCH] ia64: pass si_isr for a few more signal sources
This patch changes the kernel such that si_isr gets setup for hardware
breakpoints, single-step, and taken-branch traps. This is useful, e.g., to
determine what kind of hw breakpoint triggered the signal.
ChangeSet@1.1217.3.34, 2003-09-18 12:04:44-07:00, jes@wildopensource.com
[PATCH] ia64: small sn2 cleanup
Attached is a small cleanup patch for the sn2 header files which removes
some cases of excessive header file inclusion.
ChangeSet@1.1217.3.33, 2003-09-18 12:03:39-07:00, davidm@tiger.hpl.hp.com
ia64: Control /proc/bus/mckinley/zx1 via separate SBA_PROC_FS macro and turn
SBA_PROC_FS off by default (it's too much of a scalability bottleneck).
ChangeSet@1.1315.3.3, 2003-09-18 11:17:21+01:00, davej@redhat.com
[CPUFREQ] Read MSRs before trying to use them in powernow-k7
Very silly bug spotted by Ducrot Bruno
ChangeSet@1.1217.3.32, 2003-09-17 18:59:48-07:00, davidm@tiger.hpl.hp.com
ia64: In <asm-ia64/param.h>, do not include <linux/config.h> outside
the #ifdef __KERNEL__ bracket. Doing so pollutes the user-
level namespace. Bug report & proposed fix by GOTO Masanori.
ChangeSet@1.1315.4.5, 2003-09-18 02:25:39+01:00, davej@redhat.com
[AGPGART] Fix module alias.
From OGAWA Hirofumi
ChangeSet@1.1315.8.25, 2003-09-17 17:59:57-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (6 of 9)
This patch removes the home-brewed resizeable arrays used to store
altsetting structures, along with the now-unneeded max_altsetting field.
Since we are already making a preliminary pass through all the descriptors
to check their lengths, we take the opportunity to also count the number
of altsetting descriptors for each interface. Then exactly the right
number can be allocated all at once.
This also moves the code that allocates the altsettings outside the
usb_parse_interface() routine. Though not important now, this change will
come in handy in the next patch.
ChangeSet@1.1315.8.24, 2003-09-17 17:59:40-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (5 of 9)
This patch centralizes the error checking for invalid descriptor lengths
and unexpected descriptor types. Instead of doing it in three different
places -- while parsing configuration, interface, and endpoint descriptors
-- the new code does it all at once. Not surprisingly, this yields a net
savings in code size.
ChangeSet@1.1315.8.23, 2003-09-17 17:09:21-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (4 of 9)
Although it's hard to tell from reading the patch, this just moves one
section of code to a slightly different spot. Currently the code that
skips over the extra class- and vendor-specific configuration-related
descriptors is part of the loop that parses interface descriptors. The
patch moves it outside, immediately before that loop -- where it belongs.
ChangeSet@1.1315.8.22, 2003-09-17 17:09:04-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (3 of 9)
This patch includes a bunch of little local improvements to the code,
listed in the patch comments. There are only two notable changes. If a
device has more configurations than our maximum, the code doesn't reject
the device but simply parses as many configurations as it can and ignores
the rest. Likewise, if a configuration contains too many interfaces, the
code parses as many as it can and skips the excess. That way such devices
will be at least partially useable. Since these limits are arbitrary and
set by the implementation (not part of the USB spec), it doesn't make
sense to reject a device that violates them.
Numerous local programming improvements:
Don't initialize to 0 fields in structures that have been memset to 0.
Don't constantly keep track of how many bytes are parsed.
Use local variables to hold unwieldy values.
Remove redundant tests.
Allow devices to have more configurations or interfaces than we can handle.
ChangeSet@1.1315.8.21, 2003-09-17 17:08:46-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (2 of 9)
This patch fixes the most blatant problems that can happen when an error
is encountered during descriptor parsing.
The struct device embedded within a struct usb_interface is
initialized as soon as the structure is allocated, so that when
put_device() is called it will contain valid data.
put_device() is not called for unallocated interfaces.
The pointers in config->extra are freed when the struct
usb_host_config is freed.
rawdescriptor pointers are initialized to 0 so that they can be
freed without error.
Partially parsed configurations are remembered so that they will
be deallocated when the entire struct usb_device is freed.
ChangeSet@1.1315.8.20, 2003-09-17 17:06:26-07:00, david-b@pacbell.net
[PATCH] USB: psdocs fails for usbgadget
It updates the "gadget" kerneldoc, removing some (new) warnings, and
showing some fields it hadn't previously been showing (due to
limitations in docproc). Plus it adds a bit of information about recent
changes (new drivers).
ChangeSet@1.1315.8.19, 2003-09-17 17:06:09-07:00, dan@reactivated.net
[PATCH] USB: Debug code fixes for dabusb
ChangeSet@1.1315.8.18, 2003-09-17 16:54:30-07:00, greg@kroah.com
[PATCH] USB: make sure we never reference a usbserial port after it has been unregistered.
ChangeSet@1.1315.8.17, 2003-09-17 14:20:32-07:00, stern@rowland.harvard.edu
[PATCH] USB: Changes to core/config.c (1 of 9)
This first patch makes only trivial changes. Excess whitespace at the end
of lines is removed and return codes are altered from -1 to symbolic error
values. The only significant difference is that in one spot a valid
return is changed to an error return, when a descriptor does not have the
correct type.
- Remove excess whitespace at the ends of lines.
- Change return codes to symbolic values.
- Return an error when an invalid endpoint descriptor is found.
ChangeSet@1.1315.8.16, 2003-09-17 14:20:01-07:00, rwhron@earthlink.net
[PATCH] [PATCH] drivers/usb version/include cleanup
Remove unneeded version.h and doubley included header.
Test compiled on 2.6.0-test5-bk3.
ChangeSet@1.1315.8.15, 2003-09-17 14:18:13-07:00, dan@reactivated.net
[PATCH] USB: Debug code fixes for usblp
When compiling usblp with debug info, a compile error occurs. I presume
this is because this part of the code has not been updated since the 2.4
kernels. This patch fixes this.
I also enhanced the debug output a little, as suggested by Randy Dunlap.
ChangeSet@1.1315.8.14, 2003-09-17 14:17:50-07:00, dan@reactivated.net
[PATCH] USB: Debug code fixes for vicam
When compiling vicam with debug info, a compile error occurs. I presume
this is because this part of the code has not been updated since the 2.4
kernels. This patch fixes this.
ChangeSet@1.1338, 2003-09-17 13:56:41-07:00, shemminger@osdl.org
[PATCH] (2/2) drivers/char/misc -- seq_file
Use seq_file for /proc/misc
ChangeSet@1.1337, 2003-09-17 13:56:30-07:00, shemminger@osdl.org
[PATCH] drivers/char/misc -- use list() macros
Use list macros for misc_device list.
ChangeSet@1.1336, 2003-09-17 13:23:06-07:00, andrew.grover@intel.com
[PATCH] ACPI maintainer change
This updates the maintainer entry for ACPI. Len has already assumed
most of this responsibility, as other projects demand my attention.
My team will continue to maintain the OS-independent ACPI CA release,
but Len will be responsible for pulling ACPI CA updates into the Linux
release, and the rest of Linux-specific code in general.
ChangeSet@1.1335, 2003-09-17 13:22:54-07:00, rmk@arm.linux.org.uk
[PATCH] Make /proc/kcore configurable
This allows /proc/kcore to be entirely disabled and dropped out of the
kernel - we already select between a.out and ELF.
Right now it only drops /proc/kcore out of the kernel for ARM.
ChangeSet@1.1334, 2003-09-17 13:22:37-07:00, marcelo.tosatti@cyclades.com.br
[PATCH] WM9712 suspend/resume nopop
From: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
This patch eliminates pop noises when doing a PM suspend/resume with the
WM9712 AC97 codec.
ChangeSet@1.1333, 2003-09-17 13:22:25-07:00, axboe@suse.de
[PATCH] shared block queue tag map
This implements the possibility for sharing a tag map between queues.
Some (most?) scsi host adapters needs this, and SATA tcq will need it
for some cases, too.
ChangeSet@1.1332, 2003-09-17 13:22:12-07:00, axboe@suse.de
[PATCH] ide-cd capacity "bug"
From Daniel Pittman <daniel@rimspace.net>
Using the lra (last recorded address) isn't always reliable on some
drives, so use the regular TOC if it returns 0 capacity.
ChangeSet@1.1331, 2003-09-17 13:21:55-07:00, Urban.Widmark@enlight.net
[PATCH] smbfs module unload and highuid
I haven't been doing much smbfs work recently, but here are some bugfixes:
- Fix module unload (Angus Sawyer).
- Fix the smbfs error handling if kernel_thread() should fail.
- Allow high uids/gids to be used as the fake uid smbfs sets as file owner.
ChangeSet@1.1330, 2003-09-17 13:21:43-07:00, piggin@cyberone.com.au
[PATCH] AS documentation
The as-iosched.c source code has said this is here for a long time but
it kept getting lost.
ChangeSet@1.1329, 2003-09-17 13:21:27-07:00, chrisw@osdl.org
[PATCH] root_plug fixup
From: bert hubert <ahu@ds9a.nl>
LSM: To recap, this patch allows root_plug to work again. It needs functions
that used to reside in capability.c but linking in capability.c, disabled
root_plug from loading, as a security module is already present then. This
patch splits out the functions root_plug needs from capability.c.
ChangeSet@1.1328, 2003-09-17 13:21:14-07:00, chrisw@osdl.org
[PATCH] LSM comment fixup
From: John Levon <levon@movementarian.org>
LSM: Update comments in register_security to reflect reality
ChangeSet@1.1327, 2003-09-17 13:21:01-07:00, chrisw@osdl.org
[PATCH] Add LSM maintainer entry
Add LSM maintainer entry
ChangeSet@1.1326, 2003-09-17 13:20:43-07:00, chrisw@osdl.org
[PATCH] update credits
Update CREDITS with new contact info.
ChangeSet@1.1315.8.13, 2003-09-17 12:20:18-07:00, nikai@nikai.net
[PATCH] USB: Remove modules.txt: usb serial & storage
ChangeSet@1.1315.8.12, 2003-09-17 12:18:01-07:00, nikai@nikai.net
[PATCH] USB: Remove modules.txt: usb_media, usb_input
ChangeSet@1.1315.4.4, 2003-09-17 18:53:22+01:00, davej@redhat.com
[AGPGART] Add HP AGP 8x bridge and fix ACPI claim
The following patch to the HP ZX1 GART driver
- adds recognition of the "HWP0007" device (an AGP 8X bridge)
- fixes the use of acpi_get_devices()
The problem with acpi_get_devices() is that it always returns AE_OK,
except when the callback (zx1_gart_probe()) returns a failure. That
means agp_hp_init() cannot use the status from acpi_get_devices()
to distinguish between (1) an AGP bridge was found and successfully
initialized, and (2) no AGP bridge was found at all.
ChangeSet@1.1315.5.13, 2003-09-17 10:34:24-05:00, lord@sgi.com
[XFS] fix build for gcc 3.2
SGI Modid: 2.5.x-xfs:slinx:158511a
ChangeSet@1.1315.7.14, 2003-09-17 13:51:46+01:00, rmk@flint.arm.linux.org.uk
[ARM] Ensure that MM initialisation warnings are reported as bugs.
ChangeSet@1.1315.7.13, 2003-09-17 13:43:47+01:00, rmk@flint.arm.linux.org.uk
[ARM] Update machine types list.
ChangeSet@1.1315.7.12, 2003-09-17 13:39:26+01:00, rmk@flint.arm.linux.org.uk
[ARM] Dynamically allocate SA1111 component devices.
ChangeSet@1.1315.5.12, 2003-09-17 07:28:02-05:00, lord@jen.americas.sgi.com
[XFS] Some tweaks to the additional inode flags, suggested by Ethan Benson
SGI Modid: 2.5.x-xfs:slinx:158493a
ChangeSet@1.1315.7.11, 2003-09-17 12:47:14+01:00, rmk@flint.arm.linux.org.uk
[ARM] Clean up PCI error reporting.
Don't try to clear PCI status on devices which are no longer present.
Only clear PCI status bits which we're interested in.
Use pci_name to report the device name.
ChangeSet@1.1315.7.10, 2003-09-17 12:21:55+01:00, rmk@flint.arm.linux.org.uk
[ARM] Provide bus type and support for logic modules.
The IMPD-1 is a logic module (a stackable module) - rather than
trying to abuse platform devices, create our own bus type to handle
these.
ChangeSet@1.1322, 2003-09-16 18:07:17-07:00, shemminger@osdl.org
[PATCH] use seq_lock for monotonic time
Monotonic clock code uses reader/writer lock which is prone to same
starvation problems as we saw with xtime. This patch changes it to seq_lock
which is faster and won't starve writers in face of lots of readers.
ChangeSet@1.1315.3.2, 2003-09-17 02:04:11+01:00, davej@redhat.com
[CPUFREQ] Add missing config.h includes
ChangeSet@1.1315.4.3, 2003-09-17 01:58:33+01:00, davej@redhat.com
[AGPGART] Fix missing/bogus includes.
ChangeSet@1.1315.9.5, 2003-09-16 17:33:57-07:00, jaharkes@cs.cmu.edu
[PATCH] Coda updates [5/5]
Introduce a new kernel-userspace interface that uses 128-bit file
identifiers instead of the previously used 96-bit fileids. We also
replacing the coda_creds structure with only the fsuid.
This new API has been used by for a couple of months now, people had to
patch their kernels whenever they want to run a current Coda release.
A new Kconfig option is added to fall back on the old API for older Coda
clients and other userspace filesystems that might use our protocol.
ChangeSet@1.1315.9.4, 2003-09-16 17:33:45-07:00, jaharkes@cs.cmu.edu
[PATCH] Coda updates [4/5]
The ViceFid structure is really a Coda server datatype and the kernel
really shouldn't have to know its internal structure. Replace all
instances with struct CodaFid with opaque members.
ChangeSet@1.1315.9.3, 2003-09-16 17:33:32-07:00, jaharkes@cs.cmu.edu
[PATCH] Coda updates [3/5]
Both userspace and the kernel are testing only the fsuid part of the
coda_creds credentials structure. Nothing else is really used, so we now
match the code with the actual usage by only passing fsuid around. The
kernel-userspace API is kept compatible (for now).
ChangeSet@1.1315.9.2, 2003-09-16 17:33:13-07:00, jaharkes@cs.cmu.edu
[PATCH] Coda updates [2/5]
Use a global 'epoch' counter to invalidate cached permissions instead of
traversing a racy linked list of all known Coda inodes.
ChangeSet@1.1315.9.1, 2003-09-16 17:32:51-07:00, jaharkes@cs.cmu.edu
[PATCH] Coda updates [1/5]
- Remove unused functions and variables.
- Be a bit more strict with the definition of various types that are
shared between kernel and userspace.
- Included a couple of cleanups from Maximilian Attems and Stephen
Hemminger.
ChangeSet@1.1315.7.9, 2003-09-16 23:41:39+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix name of "cache format" cpuinfo description.
ChangeSet@1.1315.7.8, 2003-09-16 23:21:07+01:00, rmk@flint.arm.linux.org.uk
[ARM] Kill gcc preprocessor warning.
ChangeSet@1.1315.7.7, 2003-09-16 23:14:24+01:00, rmk@flint.arm.linux.org.uk
[ARM] Remove CONFIG_KBDMOUSE from arch/arm/Kconfig
ChangeSet@1.1315.7.6, 2003-09-16 22:49:30+01:00, rmk@flint.arm.linux.org.uk
[ARM] Fix gcc3 multi-line string literal build error.
ChangeSet@1.1315.7.5, 2003-09-16 22:44:42+01:00, rmk@flint.arm.linux.org.uk
[ARM] Add newly discovered CR register function.
ChangeSet@1.1315.7.4, 2003-09-16 22:40:21+01:00, rmk@flint.arm.linux.org.uk
[ARM] Provide __HAVE_ARCH_BCOPY
This squashes another compiler warning.
ChangeSet@1.1315.7.3, 2003-09-16 22:31:42+01:00, rmk@flint.arm.linux.org.uk
[ARM] Detect and fix up CPUs with non-coherent write buffers.
Jamie Lokier's cache testing program discovered a problem which seems
to be present in some CPU write buffers. This cset allows the kernel
to detect the flaw and activate a workaround to restore the user
space expectations.
ChangeSet@1.1315.8.11, 2003-09-16 13:42:41-07:00, stern@rowland.harvard.edu
[PATCH] USB: Use num_altsetting in usbnet and usbtest
This patch fixes usbnet and usbtest. When checking endpoints, they
iterate through all interfaces out to intf->max_altsetting, but they
should only go up to intf->num_altsetting. The max_altsetting value
refers to the amount of space _allocated_ for usb_host_interface
structures, not the number that are really in use.
ChangeSet@1.1315.7.2, 2003-09-16 19:46:00+01:00, rmk@flint.arm.linux.org.uk
[ARM] Update ARM CPU support.
Move ARM CPU configuration to arch/arm/mm. Seperate out the selection
of the abort, cache handling, optimised page copying and TLB handling
from the Makefile, and move it into the configuration system. This
allows us to select the correct files in arch/arm/mm and pick the
appropriate definitions in include/asm-arm/* based upon a config
symbol rather than a bunch of configuration symbols.
Also add ARM1020E, ARM1022 and ARM1026 CPU support.
ChangeSet@1.1315.8.10, 2003-09-16 11:40:50-07:00, greg@kroah.com
[PATCH] USB: fix up missing </para> in usb documentation.
This fixes build problem.
ChangeSet@1.1315.8.9, 2003-09-16 11:40:17-07:00, ramune@net-ronin.org
[PATCH] USB: make pdfdocs problem
The `make pdfdocs' target still fails for me on the
`writing_usb_drivers' document. There's one small bug in it, and one
problem I haven't figured out yet.
There is a malformed <literal>blah<literal> sequence, where the
closing tag is instead an opening tag. Patch for that below.
ChangeSet@1.1315.8.8, 2003-09-16 11:28:17-07:00, david-b@pacbell.net
[PATCH] USB: usb/gadget/Kconfig, use right PXA2xx symbols
I just noticed that Linus' tree is using the wrong CONFIG_* symbols
for kicking in the PXA 2xx support (except for "gadgetfs"). It
should use USB_PXA2XX not USB_PXA250, since it handles PXA 255,
PXA 210, PXA 263, and others.
ChangeSet@1.1315.8.7, 2003-09-16 11:28:01-07:00, zaitcev@redhat.com
[PATCH] USB: Drop debounce printout for 2.6
This seems to work well enough, we do not need the printout anymore.
ChangeSet@1.1315.8.6, 2003-09-16 11:18:25-07:00, baldrick@free.fr
[PATCH] USB speedtouch: bump the version number
ChangeSet@1.1315.8.5, 2003-09-16 11:18:08-07:00, baldrick@free.fr
[PATCH] USB speedtouch: neater sanity check
Biscuit for Greg.
ChangeSet@1.1315.8.4, 2003-09-16 11:17:53-07:00, baldrick@free.fr
[PATCH] USB: New email address for duncan
ChangeSet@1.1315.8.3, 2003-09-16 11:17:37-07:00, baldrick@free.fr
[PATCH] USB speedtouch: use multiple urbs by default
ChangeSet@1.1315.8.2, 2003-09-16 10:53:37-07:00, greg@kroah.com
[PATCH] USB: fix oops in ipaq driver
Should fix bug number 1227
ChangeSet@1.1315.8.1, 2003-09-16 10:47:50-07:00, greg@kroah.com
[PATCH] USB: fix oops when trying to suspend and resume.
Thanks to Pavel for the original version of this patch.
ChangeSet@1.1315.5.11, 2003-09-16 10:07:58-05:00, nathans@sgi.com
[XFS] Automatically set logbsize for larger stripe units
SGI Modid: 2.5.x-xfs:slinx:157534a
ChangeSet@1.1315.7.1, 2003-09-16 15:14:41+01:00, rmk@flint.arm.linux.org.uk
[ARM] Remove compiler warning in sa1111-pcipool.c
ChangeSet@1.1315.6.1, 2003-09-16 07:24:02-05:00, shaggy@shaggy.austin.ibm.com
JFS: Fix rampant data corruption
A recent change causes pervasive data corruption by over-writing inode
metadata with a word of garbage. The field, di_rdev, should only be set
for a device inode.
ChangeSet@1.1315.4.2, 2003-09-16 01:04:25+01:00, davej@redhat.com
[AGPGART] Missing prefixes in printk's
ChangeSet@1.1217.3.31, 2003-09-15 15:24:02-07:00, eranian@hpl.hp.co
[PATCH] ia64: minor perfmon2 patch
This patch fixes a typo in pfm_write_pmcs() in the test for the default
value. The code was using the lop index instead of the register
index in the PMC_DFL_VAL() macro. This was causing valid values
for some PMCs to be rejected.
ChangeSet@1.1217.3.30, 2003-09-15 15:22:48-07:00, davidm@tiger.hpl.hp.com
ia64: Re-enable /proc/sal support. Bug reported by Stephane Eranian, patch
by Jesse Barnes.
ChangeSet@1.1217.3.29, 2003-09-15 15:18:00-07:00, jbarnes@sgi.com
[PATCH] ia64: protect PAL mapping printk with EFI_DEBUG
Having this print out for every CPU on a large system was a pain, so
protect the printk with EFI_DEBUG.
ChangeSet@1.1217.3.28, 2003-09-15 15:16:29-07:00, jbarnes@sgi.com
[PATCH] ia64: turn off SLIT debugging
This code works pretty well now, so we don't need to dump all this stuff
at boot time (esp. on 128 node systems).
ChangeSet@1.1315.5.10, 2003-09-15 14:03:40-05:00, cattelan@sgi.com
[XFS] Fix from Christoph
gcc 3.3 complains about this and indeed it can only trigger if
someone magically enlarges __uint8_t :)
SGI Modid: 2.5.x-xfs:slinx:157731a
ChangeSet@1.1315.5.9, 2003-09-15 13:18:00-05:00, roehrich@sgi.com
[XFS] Change dm_send_namesp_event to take vnode ptrs rather than bhv ptrs.
SGI Modid: 2.5.x-xfs:slinx:157475a
ChangeSet@1.1315.5.8, 2003-09-15 13:07:42-05:00, nathans@sgi.com
[XFS] Alternate, cleaner fix for the ENOSPC/ACL lookup problem
SGI Modid: 2.5.x-xfs:slinx:157531a
ChangeSet@1.1315.5.7, 2003-09-15 13:03:45-05:00, cattelan@sgi.com
[XFS] IRIX sets KM_SLEEP to 0 but the support routines sets KM_SLEEP to 1.
So somebodys shortcut on irix is incorrect on linux and results in the sleep
behaviour not being set.
SGI Modid: 2.5.x-xfs:slinx:157773a
ChangeSet@1.1315.5.6, 2003-09-15 12:58:34-05:00, nathans@sgi.com
[XFS] Separate the big filesystems macro out into separate big inums and blknos macros; fix the check for too-large filesystems in the process.
SGI Modid: 2.5.x-xfs:slinx:158361a
ChangeSet@1.1315.5.5, 2003-09-15 12:57:15-05:00, nathans@sgi.com
[XFS] Add inode64 mount option; fix case where growfs can push 32 bit inodes into 64 bit space accidentally - both changes originally from IRIX
SGI Modid: 2.5.x-xfs:slinx:157935a
ChangeSet@1.1315.5.4, 2003-09-15 12:50:46-05:00, sandeen@sgi.com
[XFS] Re-work xfs stats macros to support per-cpu data
SGI Modid: 2.5.x-xfs:slinx:156453a
ChangeSet@1.1315.5.3, 2003-09-15 12:39:24-05:00, nathans@sgi.com
[XFS] Implement several additional inode flags - immutable, append-only, etc; contributed by Ethan Benson.
SGI Modid: 2.5.x-xfs:slinx:158362a
ChangeSet@1.1315.5.2, 2003-09-15 12:29:36-05:00, sandeen@sgi.com
[XFS] remove doubly-included header files
SGI Modid: 2.5.x-xfs:slinx:157933a
ChangeSet@1.1283.2.2, 2003-09-13 17:54:03+01:00, davej@redhat.com
[AGPGART] Fix silly logic bug in modular AMD64 GART driver.
We found a device, and then claimed we couldn't find one due to a
silly thinko.
agpgart: Detected AMD 8151 AGP Bridge rev B2
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: AGP aperture is 64M @ 0xe0000000
No supported AGP bridge found.
You can try agp_try_unsupported=1
ChangeSet@1.1153.107.31, 2003-09-13 17:46:42+01:00, davej@redhat.com
[CPUFREQ] Fix up debug printk formatting string in speedstep-smi
ChangeSet@1.1153.107.30, 2003-09-13 17:36:30+01:00, davej@redhat.com
[CPUFREQ] use PFX macro in common printk's
ChangeSet@1.1153.107.29, 2003-09-13 17:20:21+01:00, davej@redhat.com
[CPUFREQ] Don't print out speedstep stuff on non-Intel CPUs.
ChangeSet@1.1153.107.28, 2003-09-13 16:30:57+01:00, davej@redhat.com
[CPUFREQ] CodingStyle fixes for speedstep-smi
ChangeSet@1.1320, 2003-09-12 21:06:59-07:00, laforge@netfilter.org
[NETFILTER]: Use u16 for port numbers.
ChangeSet@1.1315.2.1, 2003-09-12 21:03:20-07:00, davem@nuts.ninka.net
[SPARC64]: Make sure cpu_data[0].udelay_val gets setup on non-SMP (found by bde@nwlink.com).
ChangeSet@1.1319, 2003-09-12 17:25:22-07:00, krkumar@us.ibm.com
[IPV6]: Export devconf device settings via netlink.
ChangeSet@1.1318, 2003-09-12 17:22:11-07:00, shemminger@osdl.org
[NET]: Better proc_net macros for non-procfs case.
ChangeSet@1.1315.1.2, 2003-09-12 17:14:53-07:00, acme@conectiva.com.br
[NETFILTER]: Fix typo in recent ip_input.c changes.
ChangeSet@1.1315.1.1, 2003-09-12 17:14:17-07:00, kpfleming@cox.net
[NET]: Make netdevice.h more userspace friendly.
ChangeSet@1.1316, 2003-09-12 08:45:11-07:00, maxk@qualcomm.com
Merge bk://linux.bkbits.net/linux-2.5
into qualcomm.com:/home/kernel/bt-2.5
ChangeSet@1.1153.68.2, 2003-09-11 20:42:03-07:00, maxk@qualcomm.com
[Bluetooth] Convert BNEP protocol to dynamic allocation of network devices.
This will allow fixing races with rmmod and sysfs access.
Patch from Stephen Hemminger <shemminger@osdl.org>
ChangeSet@1.1283.4.5, 2003-09-11 19:31:44-07:00, davem@nuts.ninka.net
[SPARC64]: Update defconfig.
ChangeSet@1.1283.3.31, 2003-09-11 18:34:40-07:00, rusty@rustcorp.com.au
[NETFILTER]: REJECT nonlinear fixes after sync with 2.4
Harald synced up ipt_REJECT.c from 2.4 route fixes, but it had
changed a fair bit because of the nonlinear fixes. This repairs it.
1) Copying of tcp header onto stack.
2) ...which also checks length requirement.
3) Skip checksum check: requires linear packet.
ChangeSet@1.1283.3.30, 2003-09-11 18:33:11-07:00, rusty@rustcorp.com.au
[NETFILTER]: MASQUERADE target for mostly-static IP addresses.
Herve Eychenne noted that many ADSL connections get the same
address when the interface comes back up, so some users use SNAT
instead of masquerade. The answer is that MASQUERADE should only
drop connections when the interface comes up, and then only if the
interface address has actually changed.
ChangeSet@1.1283.4.4, 2003-09-11 18:32:39-07:00, mroos@linux.ee
[SPARC64]: BUG on positive addresses in vga.h
ChangeSet@1.1283.3.29, 2003-09-11 18:30:44-07:00, dwmw2@infradead.org
[BLUETOOTH]: Fix bug in set_sk_owner() changes.
ChangeSet@1.1283.4.3, 2003-09-11 18:29:23-07:00, wesolows@foobazco.org
[SPARC32]: Ignore btfixups in .text.exit
ChangeSet@1.1283.3.28, 2003-09-11 18:26:31-07:00, davej@redhat.com
[IPV6]: Fix non-CONFIG_PROC_FS build.
ChangeSet@1.1283.4.2, 2003-09-11 18:25:43-07:00, rob@osinvestor.com
[SPARC32]: Non-controversial gcc-3.3 build fixes.
ChangeSet@1.1283.3.27, 2003-09-11 18:23:45-07:00, chas@cmf.nrl.navy.mil
[ATM]: exporting llc_oui[] isn't worth it (from mitch@sfgoth.com)
ChangeSet@1.1283.3.26, 2003-09-11 18:22:34-07:00, chas@cmf.nrl.navy.mil
[ATM]: seq_file conversion of /proc/net/atm [8/8] (from romieu@fr.zoreil.com)
- introduction of the struct array 'atm_proc_ents':
- removal of code duplication in atm_proc_cleanup();
- removal of code duplication in atm_proc_init();
- removal of the macros CREATE_SEQ_ENTRY() and CREATE_ENTRY();
- /proc/net/atm/vcc returns to /proc/net/atm/vc;
- credits at the top of the file;
- replaced proc_dev_atm_operations by proc_atm_dev_ops;
- atm_proc_dev_register: removal of tasteless "fail0/fail1" labels.
ChangeSet@1.1283.3.25, 2003-09-11 18:21:53-07:00, chas@cmf.nrl.navy.mil
[ATM]: seq_file conversion of /proc/net/atm [7/8]
seq_file support for /proc/net/atm/lec:
- lec_info(): seq_printf/seq_putc replaces sprintf;
- traversal of the lec structure needs to walk:
-> the lec interfaces
-> the tables of arp tables(lec_arp_tables);
-> the arp tables themselves
-> the misc tables (lec_arp_empty_ones/lec_no_forward/mcast_fwds)
Sum up of the call tree:
atm_lec_seq_start()/atm_lec_seq_next()
-> atm_lec_get_idx()
-> atm_lec_itf_walk() (responsible for dev_lec/dev_put handling)
-> atm_lec_priv_walk() (responsible for lec_priv locking)
-> atm_lec_arp_walk()
-> atm_lec_tbl_walk()
-> atm_lec_misc_walk()
-> atm_lec_tbl_walk()
Each of the dedicated functions follows the same convention: return NULL
as long as the seq_file cursor hasn't been digested (i.e. until < 0).
Locking is only done when an entry (i.e. a lec_arp_table) is referenced.
atm_lec_seq_stop()/atm_lec_itf_walk()/atm_lec_priv_walk() are responsible
for getting this point right.
- module refcounting is done in atm_lec_seq_open()/atm_lec_seq_release();
- atm_lec_info() is removed.
Chas's suggestions applied since last version:
- atm_seq_lec_fops renamed to lec_seq_fops;
- change in state handling: it wasn't correctly set to its reset value
after a complete interface walk;
- lec_arp_get_status_string() bugfix.
ChangeSet@1.1283.3.24, 2003-09-11 18:21:05-07:00, chas@cmf.nrl.navy.mil
[ATM]: seq_file for /proc/net/atm (arp) [6/8] (from romieu@fr.zoreil.com)
seq_file support for /proc/net/atm/arp:
- svc_addr/atmarp_info(): seq_printf/seq_putc replace sprintf and friends;
- arp_getidx/arp_vcc_walk() take care of the usual seq_file cursor
positionning: they both return NULL until the cursor has reached its
position. struct atm_arp_state is updated accordingly;
- arp_seq_{stop/start} are responsible for clip_tbl_hook (un)locking;
- module refcounting is done in arp_seq_open()/arp_seq_release();
- atm_lec_info() is removed.
Chas's suggestions applied since last version:
- atm_arp_xxx renamed to arp_xxx;
- atm_seq_arp_fops renamed to arp_seq_fops.
Chas didn't ask for it but I renamed arp_vc_walk to arp_vcc_walk.
ChangeSet@1.1283.3.23, 2003-09-11 18:20:18-07:00, chas@cmf.nrl.navy.mil
[ATM]: seq_file for /proc/net/atm (vc) [5/8] (from romieu@fr.zoreil.com)
seq_file support for /proc/net/atm/vc:
Same comments as for pvc and svc.
Extra Chas's suggestion applied since last version:
- atm_vc_xxx renamed to vcc_xxx.
ChangeSet@1.1283.3.22, 2003-09-11 18:19:37-07:00, chas@cmf.nrl.navy.mil
[ATM]: seq_file for /proc/net/atm (svc) [4/8] (from romieu@fr.zoreil.com)
seq_file support for /proc/net/atm/svc:
Exactly same comments as pvc. Just s/p/s/
ChangeSet@1.1283.3.21, 2003-09-11 18:18:48-07:00, char@cmf.nrl.navy.mil
[ATM]: seq_file for /proc/net/atm (pvc) [3/8] (from romieu@fr.zoreil.com)
seq_file support for /proc/net/atm/pvc:
- pvc_info(): seq_printf/seq_putc replaces sprintf;
- atm_pvc_info() removal;
- the vc helpers (vcc__seq_xxx) do the remaining work.
Chas's suggestions applied since last version:
- atm_pvc_xxx renamed to pvc_xxx
- atm_seq_pvc_fops renamed to pvc_seq_fops
ChangeSet@1.1283.3.20, 2003-09-11 18:17:56-07:00, char@cmf.nrl.navy.mil
[ATM]: seq_file for /proc/net/atm (vc utils) [2/8] (from romieu@fr.zoreil.com)
Helpers for seq_file conversion of proc/atm/{pvc/svc/vc}:
- struct vcc_state keeps
1) the struct sock from which the current struct atm_vcc is deduced
2) the family to which must belong the vcc (PF_ATM{SVC/PVC/any})
3) the availability of clip module
- vcc_seq{start/stop} are responsible for vcc_sklist locking
- __vcc_seq_open and vcc_seq_release take care of get/put for the clip module.
Chas's suggestions applied since last version:
- atm_vc_xxx renamed to vcc_xxx
- atm_vc_common_seq_open renamed __vcc_seq_open (future name clashes
avoidance)
ChangeSet@1.1283.3.19, 2003-09-11 18:16:57-07:00, char@cmf.nrl.navy.mil
[ATM]: seq_file for /proc/net/atm (devices) [1/8] (from romieu@fr.zoreil.com)
seq_file conversion for proc/atm/devices:
- code inspired from seq_file use in net/core/dev.c;
- atm_dev_lock taken/released in atm_dev_seq_{start/stop};
- add a helper CREATE_SEQ_ENTRY() similar to CREATE_ENTRY() (both are removed
once conversion is done).
- atm_dev_seq_{start/stop/next} done in net/atm/resource.[ch] to ease
future handling of atm_devs and locking structure (per Chas suggestion)
ChangeSet@1.1283.4.1, 2003-09-11 18:15:24-07:00, jfbeam@bluetronic.net
[SPARC64]: Fix VT/VT_CONSOLE Kconfig for headless operation.
ChangeSet@1.1283.3.18, 2003-09-11 18:10:53-07:00, shemminger@osdl.org
[BRIDGE]: Clear hw checksum flags when bridging.
ChangeSet@1.1283.3.17, 2003-09-11 18:09:18-07:00, yoshfuji@linux-ipv6.org
[NET]: Use proc_net_fops_create() and proc_net_remove() in net/ipv6.
ChangeSet@1.1283.3.16, 2003-09-11 18:08:54-07:00, yoshfuji@linux-ipv6.org
[NET]: Use proc_net_fops_create() and proc_net_remove() in net/ipv4.
ChangeSet@1.1283.3.15, 2003-09-11 18:08:19-07:00, yoshfuji@linux-ipv6.org
[NET]: Use proc_net_fops_create() and proc_net_remove() in net/core.
ChangeSet@1.1283.3.14, 2003-09-11 18:04:41-07:00, akpm@osdl.org
[NET]: Remove spurious TASK_RUNNING setting after schedule_timeout().
ChangeSet@1.1283.3.13, 2003-09-11 17:01:21-07:00, herbert@gondor.apana.org.au
[XFRM]: Fix ALLOC_SPI for IPCOMP.
ChangeSet@1.1283.3.12, 2003-09-11 16:59:17-07:00, q@kampsax.dtu.dk
[IPV4]: Fix wrong IP address in icmp.c error message.
ChangeSet@1.1283.3.11, 2003-09-11 16:58:25-07:00, felipewd@terra.com.br
[NET]: Kill unneded version.h in net/sched.
ChangeSet@1.1283.3.10, 2003-09-11 16:52:13-07:00, shemminger@osdl.org
[NET]: Convert packet scheduler API to seq_file.
ChangeSet@1.1283.3.9, 2003-09-11 16:51:27-07:00, shemminger@osdl.org
[NET]: Remove some unnecessary proc_fs.h includes
ChangeSet@1.1283.3.8, 2003-09-11 16:50:51-07:00, hirofumi@mail.parknet.co.jp
[NETFILTER]: Fix typoe in ip_nat_tftp.c
ChangeSet@1.1283.3.7, 2003-09-11 16:48:40-07:00, chas@cmf.nrl.navy.mil
[ATM]: Fix build failure with ATM_BR2684_IPFILTER enabled.
ChangeSet@1.1283.3.6, 2003-09-11 16:47:46-07:00, chas@cmf.nrl.navy.mil
[ATM]: Remove unnecessary GFP_ATOMIC allocation (from levon@movementarian.org)
ChangeSet@1.1283.3.5, 2003-09-11 16:46:44-07:00, laforge@netfilter.org
[NETFILTER]: Clear nf_debug in ipsec tunnel case.
ChangeSet@1.1283.3.4, 2003-09-11 16:43:45-07:00, erlend-a@us.his.no
[CRYPTO]: Add alg. type to /proc/crypto output.
ChangeSet@1.1283.3.3, 2003-09-11 16:42:50-07:00, yoshfuji@linux-ipv6.org
[NET]: Clean up /proc/net/{anycast6/igmp6}.
ChangeSet@1.1283.3.2, 2003-09-11 16:41:49-07:00, yoshfuji@linux-ipv6.org
[NET]: /proc/net/if_inet6 may drop some data.
ChangeSet@1.1283.3.1, 2003-09-11 16:41:05-07:00, yoshfuji@linux-ipv6.org
[NET]: Various /proc/net/* files may drop some data.
ChangeSet@1.1283.2.1, 2003-09-12 00:33:27+01:00, davej@hardwired.(none)
Merge hardwired.(none):/mnt/stuff/backups/src/kernel/2.6/trees/bk-linus
into hardwired.(none):/mnt/stuff/backups/src/kernel/2.6/trees/agpgart
ChangeSet@1.1283.1.4, 2003-09-11 15:46:20-07:00, greg@kroah.com
PCI: fix up some pci drivers that had marked their probe functions with __init
This also required some other functions and variables to be marked as
__devinit
ChangeSet@1.1283.1.3, 2003-09-11 14:36:33-07:00, greg@kroah.com
[PATCH] PCI: remove compiler warning from previous new_id patch
Also change the #define functions into inline functions to help
catch any future paramater mis-matches.
And clean up a few minor style issue...
ChangeSet@1.1283.1.2, 2003-09-11 14:27:15-07:00, Matt_Domsch@Dell.com
[PATCH] PCI: make new_id rely on CONFIG_HOTPLUG
> > These either need to be marked __devinit and make "new_id" dependant on
> > CONFIG_HOTPLUG
Patch below moves all the new_id code under CONFIG_HOTPLUG. Tested
with both CONFIG_HOTPLUG enabled and disabled. No significant code
changes, merely code moving, and in 2 cases, stub functions added.
ChangeSet@1.1312, 2003-09-11 15:33:42-04:00, romieu@fr.zoreil.com
[PATCH] (1/4) sdla - move out of Space.c
Apply on top of 2.6.0-test5-bk1 + Stephen sdla patches. Compiles fine.
free_netdev() patrol.
drivers/net/wan/sdla.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
ChangeSet@1.1311, 2003-09-11 15:33:35-04:00, shemminger@osdl.org
[PATCH] (5/4) dlci netdevice event handling
One more patch, found this in testing
-- need to delete device from list when unregistered
because of callback.
ChangeSet@1.1310, 2003-09-11 15:33:28-04:00, shemminger@osdl.org
[PATCH] (4/4) dlci netdevice event handling
Since dlci device is a pseudo device built on top of sdla, change it to
handle unregister events and delete itself.
ChangeSet@1.1309, 2003-09-11 15:33:20-04:00, shemminger@osdl.org
[PATCH] (3/4) dlci locking and registration changes
Change the locking for the dlci device list and registration.
- use RTNL instead of a private lock (needed for net notifier in next patch).
- reorder the checks in the dlci_add to avoid complicated unwinds
- use dev->destructor to free
- hold RTNL around deassoc to protect callback from races
ChangeSet@1.1308, 2003-09-11 15:33:13-04:00, shemminger@osdl.org
[PATCH] (2/4) get rid of register_frad
The sdla and dlci drivers have a callback interface which only stores a name
in a table, but doesn't do anything useful. Looks like an interface which has
lost it's usefulness and can be safely removed.
Tested on 2.6.0-test5 by exercising the higher layer (dlci) without real hardware.
ChangeSet@1.1307, 2003-09-11 15:33:06-04:00, shemminger@osdl.org
[PATCH] (1/4) sdla - move out of Space.c
Patch against 2.60-test5 to move sdla driver out of Space.c for initialization
in non-module case. Since this driver doesn't come up until the device has
been configured with an ioctl (set_config); there is no way it can have
startup order problems.
ChangeSet@1.1306, 2003-09-11 15:26:08-04:00, shemminger@osdl.org
[PATCH] fix build of cosa
The cosa driver definition of ioctl's either conflicts or was not picked
up in the last round of _IOR redefinition (on 2.6.0-test5).
The following makes it build, have no idea if it still works
on real hardware.
ChangeSet@1.1305, 2003-09-11 15:23:55-04:00, felipewd@terra.com.br
[PATCH] slip.c: current state cleanup
ChangeSet@1.1304, 2003-09-11 15:23:47-04:00, rddunlap@osdl.org
[PATCH] tr/olympic probe: remove #warning, improve error handling
This patch to 2.6.0-test5 removes the #warning in tokenring/olympic.c
and improves error handling in the probe function.
ChangeSet@1.1303, 2003-09-11 15:11:39-04:00, scott.feldman@intel.com
[e1000] misc whitespace cleanup, changelog
* misc whitespace cleanup, changelog
ChangeSet@1.1302, 2003-09-11 15:11:32-04:00, scott.feldman@intel.com
[e1000] Add PHY master/slave #define override
* Add PHY master/slave #define override to address link issues
with 82541/7 (rev2) against some low-end switches. Forcing
master will improve the time-to-link against these switches.
ChangeSet@1.1301, 2003-09-11 15:11:25-04:00, scott.feldman@intel.com
[e1000] move static to table from .h to .c
* Move static table from hw.h to hw.c to avoid creating a copy
of table everytime hw.h is included.in .c.
ChangeSet@1.1300, 2003-09-11 15:11:17-04:00, scott.feldman@intel.com
[e1000] cleanup error return codes
* clean up error return code propagation and eliminate redundant
DEBUGOUT statements.
ChangeSet@1.1299, 2003-09-11 15:11:10-04:00, scott.feldman@intel.com
[e1000] make function our of setting media type
* Consolidate code and make function out of setting media type.
ChangeSet@1.1298, 2003-09-11 15:11:02-04:00, scott.feldman@intel.com
[e1000] add ethtool flow control support
* Add ethtool flow control support
ChangeSet@1.1297, 2003-09-11 15:10:55-04:00, scott.feldman@intel.com
[e1000] read correct bit from EEPROM for getting WoL settings
* Bug fix: read the correct bit from the EEPROM that controls the
initial setting for WoL after a reset.
ChangeSet@1.1296, 2003-09-11 15:10:48-04:00, scott.feldman@intel.com
[e1000] Turn off ASF support on Fiber nics
* Turn off ASF support on fiber nics. Wasn't tested and isn't
known to work, so disable before someone hurts themselves.
ChangeSet@1.1295, 2003-09-11 15:10:40-04:00, scott.feldman@intel.com
[e1000] 82544 PCI-X hang fix + TSO updates
* Bug fix: 82544 hang with PCI-X: if outgoing Tx buffers terminate
within evenly-aligned dwords, and the device is sharing the bus
segment with another PCI-X device, 82544 can hang the bus on a
split-completion transaction. Fix is to split buffer into two
buffers with the first one not terminating within evenly-aligned
dword address, and the second one being 4-bytes, which goes as a
non-split-conpletion PCI-X transaction.
* 8254x controllers that support TSO do an internal calculation to
make sure there is enough FIFO space to handle the overhead
of each TSO segment before DMA'ing TSO data from host memory. The
internal calculation is dependent on the mss of the TSO (defines
the number of segments), but the reserved space is a constant, so
we need to adjust the maximum size of each buffer queued to the
hardware to hold the equation and not overrun the FIFO. This is
per TSO because the mss can change from one send to the next.
ChangeSet@1.1294, 2003-09-11 15:10:33-04:00, scott.feldman@intel.com
[e1000] new 82541/5/6/7 hardware support
* Added 82545 (rev3), 82546 (rev3), and 82541/7 (rev2) support
- new device IDs
- internal SERDES support for 82545/6 (rev3)
- don't apply MMRBC workaround for 82545/6 (rev3)
- don't use IO mapping for reset for 82545/6 (rev3)
ChangeSet@1.1293, 2003-09-11 14:53:27-04:00, amir.noam@intel.com
[bonding 2.6] misc fixes: missing include, typos, comments
ChangeSet@1.1292, 2003-09-11 14:53:20-04:00, amir.noam@intel.com
[bonding 2.6] make each bond device use its own /proc entry
ChangeSet@1.1291, 2003-09-11 14:53:12-04:00, amir.noam@intel.com
[bonding 2.6] fix error handling in init code
ChangeSet@1.1290, 2003-09-11 14:53:05-04:00, amir.noam@intel.com
[bonding 2.6] embed stats struct inside bonding private struct
ChangeSet@1.1289, 2003-09-11 14:52:58-04:00, amir.noam@intel.com
[bonding 2.6] fix OOPS in bonding driver, when removing primary
ChangeSet@1.1288, 2003-09-11 14:52:50-04:00, amir.noam@intel.com
[bonding 2.6] fix change active command
ChangeSet@1.1287, 2003-09-11 14:52:43-04:00, amir.noam@intel.com
[bonding 2.6] fix kernel panic when optional feature used
ChangeSet@1.1286, 2003-09-11 14:52:35-04:00, amir.noam@intel.com
[bonding 2.6] fix ARP monitoring bug
ChangeSet@1.1285, 2003-09-11 14:52:28-04:00, amir.noam@intel.com
[bonding 2.6] fix load balance problem with high UDP Tx stress
ChangeSet@1.1284, 2003-09-11 14:52:20-04:00, amir.noam@intel.com
[bonding 2.6] fix 802.3ad long fail over with high UDP Tx stress
ChangeSet@1.1283, 2003-09-11 07:06:46-07:00, piggin@cyberone.com.au
[PATCH] Badness in as_completed_request warning
Thish fixes Suparna's fsx and aio-stress and Dave Olien's concurrent
mke2fs problems.
It moves the hash adding into as_add_request. This fixes a small bug
where a request could be added to the merge hash after being put on the
dispatch list.
It also moves responsibility for handling rbtree aliases (requests with
the same start sector) out of as_add_arq_rb and into its caller. This
cleans up a layering problem which was causing the state machine to go
silly. Now instead of forcing the alias out onto the dispatch list, we
chain the new request behind it, and they get sorted out at dispatch
time.
ChangeSet@1.1282, 2003-09-11 07:02:21-07:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ps2esdi broken
The PS/2 ESDI driver has some problems: a couple of typos on the modular
side and misuse of module_init():
ChangeSet@1.1281, 2003-09-10 16:46:16-07:00, Andries.Brouwer@cwi.nl
[PATCH] another keyboard problem solved
A colleague reported that the keyboard of his brandnew laptop
is dead under 2.6 while 2.4 works.
Now I once wrote
In order to avoid interference between scancode sequences
or mouse packets and the reponses given to commands,
the keyboard or mouse should always be disabled before
giving a command that requires a response, and probably
enabled afterwards. Some keyboards or mice do the disable
automatically in this situation, but still require an
explicit enable afterwards.
(http://www.win.tue.nl/~aeb/linux/kbd/scancodes-9.html)
This is what happens on this laptop. The routine atkbd_probe()
probes for a keyboard, and after detecting it, enables it.
But immediately afterwards the routine atkbd_set_3() reads
the current scancode set and sets the desired set, and as a
side effect of these commands, the keyboard gets disabled again.
Thus, the keyboard enable must be moved after all command sending
has been done.
Now that I patch this area anyway: we are almost always in
scancode set 2 but send the ATKBD_CMD_SETALL_MB command
that only works in scancode set 3. At best this is useless.
At worst it confuses the keyboard. So, I put this command
in a separate routine and call that only when we really
are in scancode set 3.
ChangeSet@1.1239.2.4, 2003-09-11 00:08:56+01:00, rmk@flint.arm.linux.org.uk
[ARM] Update SA1111
Combine the two initialisation functions, allow SA1111 to be built
as a module, and remove a redundant SA1111 function prototype.
ChangeSet@1.1278, 2003-09-10 12:00:14-07:00, armin@melware.de
[PATCH] Eicon ISDN driver: remove old devfs_handle
devfs_handle is not used any more.
ChangeSet@1.1277, 2003-09-10 11:57:53-07:00, joe@perches.com
[PATCH] Fix SEQ_START_TOKEN typo
My fault. Fix for broken aarp.c which got an extra closing parenthesis.
ChangeSet@1.1239.2.3, 2003-09-10 19:12:22+01:00, zecke@flint.arm.linux.org.uk
[ARM PATCH] 1656/1: Simpad board update to make it work
Patch from Holger Freyther
Make it work ;)
ChangeSet@1.1239.2.2, 2003-09-10 19:07:07+01:00, zecke@org.rmk.(none)
[ARM PATCH] 1654/1: Simpad PCMCIA resubmit
Patch from Holger Freyther
This fixes initialization of PCMCIA for the SIMpad
unsigned long now user for the flag
ChangeSet@1.1239.2.1, 2003-09-10 19:04:03+01:00, zecke@org.rmk.(none)
[ARM PATCH] 1653/1: Simpad Flash Partition resubmit
Patch from Holger Freyther
This the the resubmit of the flash partition changes for SIMpad.
Two versions one for cramfs one for all jffs2 and also the SIM has two banks instead of one even if they're next to each other...
ChangeSet@1.1276, 2003-09-10 09:44:42-07:00, willy@debian.org
[PATCH] interrupt.h needs kernel.h
<linux/interrupt.h> uses barrier() but does not include <linux/kernel.h>.
ChangeSet@1.1275, 2003-09-10 09:44:34-07:00, willy@debian.org
[PATCH] fs/exec.c whitespace cleanups
Whitespace cleanup (mostly deleting trailing whitespace).
ChangeSet@1.1274, 2003-09-10 09:44:26-07:00, willy@debian.org
[PATCH] 1GB stack size limit on PA-RISC
This patch introduces a 1GB stack size limit for stack-grows-up (ie
PA-RISC), as discussed previously.
ChangeSet@1.1273, 2003-09-10 09:40:05-07:00, anton@samba.org
[PATCH] quieten initramfs and fix /dev permissions
Dont print the contents of the initramfs, for any decent sized cpio it will
overflow the kernel ring buffer.
Also relax permissions on /dev (755 not 700).
ChangeSet@1.1272, 2003-09-10 09:39:55-07:00, anton@samba.org
[PATCH] Fix initramfs permissions on directories and special files
Set correct permissions on initramfs directories and special files. We dont
want to obey the umask here, so do the same thing we do on normal files -
call sys_chmod.
ChangeSet@1.1271, 2003-09-10 09:39:47-07:00, anton@samba.org
[PATCH] fix oops in hvc_console
tty_register_driver already calls tty_register_device so there is no need
to do it in hvc_console. Besides, it oopses when we do that.
ChangeSet@1.1270, 2003-09-10 09:39:38-07:00, rusty@rustcorp.com.au
[PATCH] Remove modules.txt
Thanks to Stephen Hemminger for pointing out how obsolete modules.txt is.
modules.txt contains mainly ancient information which is replicated
in the kconfig help message, README, makefile.txt or the modprobe manual
page. The only part which is not covered elsewhere is the "building
external modules" which is still being debated (and belongs under the
kbuild docs). kmod.txt reference removed from index, too.
ChangeSet@1.1269, 2003-09-10 09:29:39-07:00, armin@melware.de
[PATCH] Eicon ISDN driver: removed __devinitdata from pci_device_id.
pci_device_id can not be marked __devinitdata,
was re-added with last update by accident.
ChangeSet@1.1268, 2003-09-10 09:28:40-07:00, willy@debian.org
[PATCH] Fill in ELF OSABI in ELF headers
This fills in the ELF EI_OSABI field. This doesn't matter for most
architectures, but PA-RISC uses the Linux flavour of the ABI (since HPUX
uses the None flavour).
Patch by Randolph Chung.
ChangeSet@1.1239.1.1, 2003-09-10 08:59:46+01:00, rmk@flint.arm.linux.org.uk
Merge flint.arm.linux.org.uk:/usr/src/bk/linux-2.6
into flint.arm.linux.org.uk:/usr/src/bk/linux-2.6-pcmcia
ChangeSet@1.1267, 2003-09-10 00:41:11-07:00, axboe@suse.de
[PATCH] blk API update (and bug fix) to CDU535 cdrom driver
This is a lot better than what is there know.
From: Felipe W Damasio <felipewd@terra.com.br>
- cli-sti removal
- blk API update
- set_current_state
- Remove 'panic' line.
.. and we can now remove the BROKEN_ON_SMP Kconfig annotation.
ChangeSet@1.1266, 2003-09-10 00:41:02-07:00, axboe@suse.de
[PATCH] get rid of warning in gscd
From: Stephen Hemminger <shemminger@osdl.org>
Compiler warning due to missing equal sign.
ChangeSet@1.1265, 2003-09-10 00:21:46-07:00, akpm@osdl.org
[PATCH] CPU scheduler CAN_MIGRATE fix
From: Andrew Theurer <habanero@us.ibm.com>
This change:
http://linux.bkbits.net:8080/linux-2.5/diffs/kernel/sched.c@1.202
does not seem to make sense:
#define CAN_MIGRATE_TASK(p,rq,this_cpu) \
((!idle || (jiffies - (p)->last_run > cache_decay_ticks)) && \
!task_running(rq, p) && \
cpu_isset(this_cpu, (p)->cpus_allowed))
It should be just the opposite; an idle cpu should be able to have a more
aggressive steal, and a busy cpu should not.
ChangeSet@1.1264, 2003-09-10 00:21:38-07:00, akpm@osdl.org
[PATCH] sys_fadvise needs asmlinkage
ChangeSet@1.1263, 2003-09-10 00:21:30-07:00, akpm@osdl.org
[PATCH] Reduce random driver lock contention
From: Matt Mackall <mpm@selenic.com>
The new locking in the random driver is consuming 60% of CPU resources in
Anton's monster power5 boxes.
Basically, when the primary pool is 7/8th full, we shut off the firehose
and go into a trickle mode to keep the pool fresh. Saves CPU for everyone
and should make the contention drop off the charts too (though the trickle
factor might need adjusting again for Origin-class machines).
ChangeSet@1.1262, 2003-09-10 00:21:22-07:00, akpm@osdl.org
[PATCH] fix Summit srat.h includes
From: Dave Hansen <haveblue@us.ibm.com>
I was compiling for my plain 'ol PC, and was getting unresolved symbols
for get_memcfg_from_srat() and get_zholes_size(). The CONFIG_NUMA
definition right now allows it to be turned on for plain old X86_PC.
Does anyone know why this is?
depends on SMP && HIGHMEM64G &&
(X86_PC || X86_NUMAQ || X86_GENERICARCH ||
(X86_SUMMIT && ACPI && !ACPI_HT_ONLY))
In any case, the summit code incorrectly assumes in at least 2 places
that NUMA && !NUMAQ means summit. Someone was evidently trying to cover
the generic subarch case, but that's already taken care of by the lovely
config system and CONFIG_ACPI_SRAT. This patch fixes those assumptions
and adds a nice little warning for people that try to #include srat.h
without having srat support turned on.
ChangeSet@1.1261, 2003-09-10 00:21:14-07:00, akpm@osdl.org
[PATCH] mwave locking fixes
From: Manfred Spraul <manfred@colorfullife.com>
The mwave driver uses a user space daemon for some modem operations. The
user space daemon calls ioctl(,IOCTL_MW_GET_IPC), and the driver returns
after an interrupt arrived. The actual wait used
interruptible_sleep_on(), which can lead to lost wakeups. A local
spinlock on the stack is used to close that race, but this is broken on
SMP, perhaps even with preempt.
The attached patch fixes that by switching to the normal
add_wait_queue/test_if_race_occured/schedule/remove_wait_queue sequence.
ChangeSet@1.1260, 2003-09-10 00:21:06-07:00, akpm@osdl.org
[PATCH] ext3: remove debug code
ext3 has fancy test harness code which allows you to simulate crashes (for
testing recovery). It will make the underlying disk start ignoring writes a
specified number of seconds after the mount.
It's inoperative without an additional offline patch anyway, and it's doing
hacky things which scared Al. So kill it; I'll maintain it in the separate
ext3 debug patch.
ChangeSet@1.1259, 2003-09-10 00:20:58-07:00, akpm@osdl.org
[PATCH] tidy up lib/inflate.c error messages
From: Andre McCurdy <armcc2000@yahoo.com>
There is some inconsistency within lib/inflate.c and its users about
whether the error message text or the error() function should provide
the '\n'.
This patch tries to make everyone consistent - by removing the
newline from all message texts, and adding one to the only error()
function which did not provide it (in init/do_mounts_rd.c).
ChangeSet@1.1258, 2003-09-10 00:20:49-07:00, akpm@osdl.org
[PATCH] really use english date in version string
From: Andrey Borzenkov <arvidjaar@mail.ru>
LANG is not always enough to force date to english.
ChangeSet@1.1257, 2003-09-10 00:20:41-07:00, akpm@osdl.org
[PATCH] install_page pte use-after-unmap fix
From: Rajesh Venkatasubramanian <vrajesh@eecs.umich.edu>
Don't deref the pte pointer after having kunmapped the memory it points at.
ChangeSet@1.1256, 2003-09-10 00:20:33-07:00, akpm@osdl.org
[PATCH] remap file pages MAP_NONBLOCK fix
From: Rajesh Venkatasubramanian <vrajesh@eecs.umich.edu>
The remap_file_pages system call with MAP_NONBLOCK flag does not
install file-ptes when the required pages are not found in the
page cache. Modify the populate functions to install file-ptes
if the mapping is non-linear and the required pages are not found
in the page cache.
Patch is for test4-mm6. Compiles and boots. Patch tested using the
programs at:
http://www-personal.engin.umich.edu/~vrajesh/linux/remap-file-pages/
ChangeSet@1.1255, 2003-09-10 00:20:25-07:00, akpm@osdl.org
[PATCH] ia32 idle using PNI monitor/mwait
From: "Nakajima, Jun" <jun.nakajima@intel.com>
Attached is a patch that enables PNI (Prescott New Instructions)
monitor/mwait in the kernel idle handler.
ChangeSet@1.1254, 2003-09-10 00:20:16-07:00, akpm@osdl.org
[PATCH] d_delete-d_lookup race fix
From: Maneesh Soni <maneesh@in.ibm.com>
d_delete() calls dentry_iput() after releasing the per dentry lock. This
can race with __d_lookup and lead to situation where we can make dentry
negative with ref count > 1. The following patch makes dentry_iput() to
hold per dentry lock till d_inode is NULL and dentry has been removed from
d_alias list.
ChangeSet@1.1253, 2003-09-10 00:20:08-07:00, akpm@osdl.org
[PATCH] ppp devfs oops fix
From: Christoph Hellwig <hch@infradead.org>
PPP leaves the chardev registered even if we're going to fail the modprobe.
ChangeSet@1.1252, 2003-09-10 00:20:00-07:00, akpm@osdl.org
[PATCH] Handle NR_CPUS overflow
From: john stultz <johnstul@us.ibm.com>
Don't try to support more than NR_CPUS cpus: things overflow.
Also, increase the default in config for some architectures. (Dave
Hansen).
ChangeSet@1.1251, 2003-09-10 00:19:52-07:00, akpm@osdl.org
[PATCH] remove duplicate includes in kernel/
From: "Randy.Dunlap" <rddunlap@osdl.org>
remove duplicate #includes in kernel/
ChangeSet@1.1250, 2003-09-10 00:19:45-07:00, akpm@osdl.org
[PATCH] sound: remove duplicate includes
From: "Randy.Dunlap" <rddunlap@osdl.org>
remove duplicate #includes in sound/
ChangeSet@1.1249, 2003-09-10 00:19:37-07:00, akpm@osdl.org
[PATCH] make selinux enable param config option, enabled by
From: James Morris <jmorris@redhat.com>
This patch against current bk makes the recently added SELinux boot
parameter feature a configurable option, and enables SELinux by default
when selected. These changes were made following feedback including
discussion on the SELinux list.
The rationale for the changes is to allow SELinux to be be configured and
enabled unconditionally. If the boot parameter option is selected, then
SELinux is now enabled unless selinux=0 is specified at the kernel command
line.
ChangeSet@1.1248, 2003-09-10 00:19:28-07:00, akpm@osdl.org
[PATCH] Fix imm.c again
From: Adrian Bunk <bunk@fs.tum.de>
Earlier patch wasn't correct especially in the !CONFIG_SCSI_IZIP_EPP16
case, reading all uses of this array (IMM_MODE_STRING is used to print the
corresponding string in printks).
If I'm not misunderstanding it, CONFIG_SCSI_IZIP_EPP16 means "use 16bit
even when 32bit is requested".
It seems the right solution is
static char *IMM_MODE_STRING[] =
{
[IMM_AUTODETECT] = "Autodetect",
[IMM_NIBBLE] = "SPP",
[IMM_PS2] = "PS/2",
[IMM_EPP_8] = "EPP 8 bit",
[IMM_EPP_16] = "EPP 16 bit",
#ifdef CONFIG_SCSI_IZIP_EPP16
[IMM_EPP_32] = "EPP 16 bit",
#else
[IMM_EPP_32] = "EPP 32 bit",
#endif
[IMM_UNKNOWN] = "Unknown",
};
ChangeSet@1.1247, 2003-09-10 00:19:20-07:00, akpm@osdl.org
[PATCH] reiserfs direct-IO support
From: Oleg Drokin <green@namesys.com>
This patch implements DirectIO support for reiserfs v3. This is mostly a
port from 2.4.
Thanks to Mingming Cao from IBM for some clues in porting.
ChangeSet@1.1246, 2003-09-10 00:19:11-07:00, akpm@osdl.org
[PATCH] Move ikconfig to /proc/config.gz
From: "Randy.Dunlap" <randy.dunlap@verizon.net>
The SuSE kernels place their ikconfig info at /proc/config.gz: in a
different place, and compressed. We thought it was a good idea to do it
that way in 2.6 as well.
- gzip the /proc config file, put it in /proc/config.gz;
- Based on a SuSE patch by Oliver Xymoron <oxymoron@waste.org>, which was
derived from a patch by Nicholas Leon <nicholas@binary9.net>
- change /proc/ikconfig/built_with to /proc/config_build_info;
- cleanup ikconfig init/exit entry points (static, __init, __exit);
- Makefile help from Sam Ravnborg;
DESC
ikconfig cleanup
EDESC
From: Stephen Hemminger <shemminger@osdl.org>
Simplify and cleanup the code:
- use single interface to seq_file where possible
- don't need to do as much of the /proc interface, only read
- use copy_to_user to avoid char at a time copy
- remove unneccesary globals
- use const char[] rather than const char * where possible.
Didn't change the version since interface doesn't change.
ChangeSet@1.1245, 2003-09-10 00:19:03-07:00, akpm@osdl.org
[PATCH] compiler warning fixes for DAC960 on alpha
From: Dave Olien <dmo@osdl.org>
This patch is forwarded from Jay Estabrook at HP. I've compiled the
patch on ia32 and ia64 machines and it's good. I also recreated
the patch so it would apply to mm5 without fuzzy offsets.
Here's Jay's summary of the patch:
Here's a very small set of patches against 2.6.0-test4 that help the
DAC960 driver compile cleaner (gets rid of warnings on Alpha) and help
it to work on some old OEM'ed DAC960 cards that were sold in our older
Alphas.
The warnings are all concerned with "conversions to different size
without cast", as pointers and longs are same size (8-bytes) but ints
are 4-bytes, on Alpha. I don't believe the change to (long) from (int)
will affect any 32-bit architectures, but those using LP64 like Alpha,
ie SPARC64 and prolly IA64, will have the warnings go away.
The change to make the oldest acceptable firmware version 2.70 instead
of 2.73 is made spcific to Alpha, since it is only those cards that
DEC OEM'ed from Mylex that would have such (as explained a bit better
in the patch itself).
ChangeSet@1.1244, 2003-09-10 00:18:56-07:00, akpm@osdl.org
[PATCH] dac960 devfs_name initialisation fix
From: Andrey Borzenkov <arvidjaar@mail.ru>
DAC960.c does it incorrectly (at least in 2.6.0-test4). It will create
_directory_ /dev/rd/cNdM making it impossible to create compat block device
entry with the same name.
The right thing it to create separate directory for each controller/target as
in attached trivial patch (untested due to lack of hardware). You will need
devfsd support for this but then you will need it for cciss or cpqarray as
well and possibly for others. Which returns us to the problem of devfsd
maintenance ...
ChangeSet@1.1243, 2003-09-10 00:18:46-07:00, akpm@osdl.org
[PATCH] monolitic_clock, timer_{tsc,hpet} and CPUFREQ
From: Dmitry Torokhov <dtor_core@ameritech.net>
I noticed that although timer_tsc registers cpufreq notifier to detect
frequency changes and adjust cpu_khz it does not set cyc2ns_scale.
ChangeSet@1.1242, 2003-09-10 00:18:38-07:00, akpm@osdl.org
[PATCH] Initialise devfs_name in various block drivers
From: Andrey Borzenkov <arvidjaar@mail.ru>
Various block drivers are currently devfs-unaware. Andrey's patch attempts
to give them reasonable representations in devfs.
"The attached patch suggests some possible names for non-floppy devices
based on reading driver source. I have to ask if these make sense. At
least for cciss Mandrake devfsd patch expects different names but it
seems to be mistake (it assumes single controller always)
"For floppy it is not as simple. Floppy cannot use genhd and must
create names manually; but I do not know what names are appropriate or
expected.
"For acsi the target/lun name may have problem of creating compat names
(if any) by devfsd.
"Please note that none of them created any devfs name under 2.4 as well.
So it is not a regression ..."
ChangeSet@1.1241, 2003-09-10 00:18:30-07:00, akpm@osdl.org
[PATCH] calibrate_tsc() fix and consolidation
From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
CONFIG_TIMER_CYCLONE doesn't build at present because calibrate_tsc() was
made static.
The patch fixes that up and moves all calibrate_tsc functions into a common
file, avoiding the current code duplication.
ChangeSet@1.1240, 2003-09-10 00:18:20-07:00, akpm@osdl.org
[PATCH] s/spin_lock_irqrestore/spin_unlock_irqrestore
From: Vinay K Nallamothu <vinay-rc@naturesoft.net>
Fix a couple of cut-n-paste errors.
(Why on earth is a scsi driver poking at the RTC hardware?)
ChangeSet@1.1239, 2003-09-09 22:09:55-07:00, torvalds@home.osdl.org
Fix ray_cs for new interrupt handling.
Damn 16-bit PCMCIA layer has no type checking. Complete crap.
ChangeSet@1.1238, 2003-09-09 20:22:22-07:00, torvalds@home.osdl.org
From Stephen Hemminger: we were trying to cast an "unsigned short"
to a pointer. That was a typo.
Ack'ed by Al Viro.
ChangeSet@1.1217.3.27, 2003-09-09 17:01:56-07:00, jbarnes@sgi.com
[PATCH] ia64: update Kconfig comment for NR_CPUS
ChangeSet@1.1237, 2003-09-09 16:49:25-07:00, eyal@eyal.emu.id.au
[PATCH] wl3501 with old compiler
Fix the ## handling to work with old gcc versions (spaces around the ','
to make token boundaries work).
ChangeSet@1.1236, 2003-09-09 16:28:36-07:00, torvalds@home.osdl.org
Make rxrpc use SEQ_START_TOKEN.
ChangeSet@1.1235, 2003-09-09 16:24:51-07:00, joe@perches.com
[PATCH] Use SEQ_START_TOKEN in include/net/* [3/3]
ChangeSet@1.1234, 2003-09-09 16:23:49-07:00, joe@perches.com
[PATCH] Use SEQ_START_TOKEN in include/net/* [2/3]
ChangeSet@1.1233, 2003-09-09 16:23:41-07:00, joe@perches.com
[PATCH] Use SEQ_START_TOKEN in drivers/net/* [1/3]
ChangeSet@1.1232, 2003-09-09 15:50:14-07:00, shemminger@osdl.org
[PATCH] Fix modularization of Siemens line discipline
Convert SIEMENS R3964 tty line discipline on 2.6.0-test5 to use tty_ldisc owner
instead of explicit MOD_INC/DEC.
And fix the initializer to be a much more readable C99 one.
ChangeSet@1.1231, 2003-09-09 14:42:24-07:00, shemminger@osdl.org
[PATCH] Get rid of Intermezzo warning
There is a leftover MOD_DEC_USE_COUNT intermezzo, with no matching _INC_
anywhere.
Since it sets owner on the file system operations there should be no
need for explicit module manipulation.
ChangeSet@1.1230, 2003-09-09 14:38:31-07:00, torvalds@home.osdl.org
Merge bk://linux-dj.bkbits.net/cpufreq
into home.osdl.org:/home/torvalds/v2.5/linux
ChangeSet@1.1228, 2003-09-09 14:32:54-07:00, guillaume@morinfr.org
[PATCH] fix cpu_test_and_set() on UP
cpumask_up.h is broken. It tries to access the "mask" member although
that cpumask_t is an ulong on UP. This breaks archs which uses cpumask
functions even on UP such as s390.
ChangeSet@1.1217.1.5, 2003-09-10 06:55:52+10:00, anton@samba.org
ppc64: Give us a generic local.h until we have atomic64
ChangeSet@1.1227, 2003-09-09 13:45:50-07:00, torvalds@osdl.org
[PATCH] Fix CONFIG_PCMCIA_WL3501 with older compilers
We only support named initializers with one leval of naming, ie that
.foo.bar = baz,
thing should go. gcc-2.95 doesn't handle it (neither does sparse, I
think).
Replace such initializers with
.foo = {
.bar = baz,
},
instead.
ChangeSet@1.1153.107.27, 2003-09-09 21:44:43+01:00, davej@redhat.com
[CPUFREQ] add cpufreq_update_policy()
Add a new cpufreq_update_policy call:
Certain cpufreq policy notifers have different needs at different times.
Thus it needs to be possible to re-evaluate an already set cpufreq policy.
Note that the cpufreq policy should only be set by one person: the user.
Not any other in-kernel code [with one exception, of course: during
booting].
ChangeSet@1.1153.107.26, 2003-09-09 21:42:00+01:00, davej@redhat.com
[CPUFREQ] remove $Id$ tags, update filenames
ChangeSet@1.1226, 2003-09-09 13:38:49-07:00, willy@debian.org
[PATCH] PA-RISC update for 2.6.0-test5
PA-RISC updates for 2.6.0-test5.
Contributions from Paul Bame, James Bottomley, Randolph Chung, Helge
Deller, Grant Grundler, LaMont Jones, Matthew Wilcox
ChangeSet@1.1225, 2003-09-09 13:38:20-07:00, bunk@fs.tum.de
[PATCH] ATM Ambassador no longer BROKEN_ON_SMP
Chas Williams fixed the compilation on SMP, so we can remove the Kconfig
annotation now and let people select it in the build again.
ChangeSet@1.1153.107.25, 2003-09-09 21:35:48+01:00, davej@redhat.com
[CPUFREQ] Merge speedstep-smi driver.
From: Hiroshi Miura <miura@da-cha.org>
Intel SpeedStep driver using a BIOS SMI call.
Quoting his original announcement:
"This driver is based on the information from
1. Microsoft Windows XP Document.
we can get the SMI interface values from ax=E980/int15 BIOS call.
2. Intel SpeedStep Applet Document.(from HP.com)
http://h18007.www1.hp.com/support/files/evonotebook/us/download/10631.html
" Adds code to request transition ownership when processing
the system critical resume message. When a critical hibernate occurs,
the Applet does not receive any system level notification. The change forces
the Applet to re-acquire transition ownership upon resume from a critical hibernate. "
This is informative. This saied that something 'ownership' call is needed on SMI
interface first.
3. Grover, Andrew's int 15h patch posted to cpufreq ml
Message-ID: <F760B14C9561B941B89469F59BA3A847E96E28@orsmsx401.jf.intel.com>
code which call BIOS to get SMI values. I included it.
4. Malik Martin's rev engineering results.
call is made with BX, CX, EDI register values.
and need signature 'ISG' when call.
find function values. bx=1(get) and bx=2(set)
5. Marc Lehmann's 'speedstep' utility,
sample of assembler code to call SMI.
6. My work.
find function to return max/min freq which system supportd. (bx=4)
more values are gotten, but I cannot understand...
find 'ownership' function value(bx=0, which is other than 1 2 4..).
ToDo(in pregress)
support governor "auto" and using smi_event call, imprement auto freqchange
feature.
test on 440BX/ZX platform.
Memo
module parameters are override result of an int 15h/eax=E890h call.
these parameter value are gotten from Windows XP registory."
Also includes some bugfixes, updates and workarounds from me.
NB: A lot of BIOS out there are buggy. You might want to try this driver
also with Intel's default values -- smi_cmd = 0x82 and smi_port = 0xb2
ChangeSet@1.1217.1.4, 2003-09-10 06:23:25+10:00, anton@samba.org
ppc64: catch bad ioctl size at compile time, from x86
ChangeSet@1.1217.9.20, 2003-09-09 13:14:44-07:00, rmk@arm.linux.org.uk
[PATCH] More buggy pci drivers
This should fix all the remaining pci drivers which mark the pci device
ID tables as being discardable at run time.
ChangeSet@1.1217.9.19, 2003-09-09 13:14:34-07:00, rmk@arm.linux.org.uk
[PATCH] stable AGP pci_device_id tables
This should fix all the AGP drivers.
pci_device_id tables can not and must not be marked discardable. They
are used for as long as the driver is registered.
ChangeSet@1.1217.9.18, 2003-09-09 13:02:16-07:00, armin@melware.de
[PATCH] eicon ISDN driver: update
Use different var-names if they are non-static,
configure 4BRI like BRI cards, fixed new /proc entries,
inline declarations for common helper functions.
ChangeSet@1.1217.9.17, 2003-09-09 13:02:08-07:00, armin@melware.de
[PATCH] eicon ISDN driver: C comments
changed // comments to /* */
ChangeSet@1.1217.9.16, 2003-09-09 13:02:00-07:00, armin@melware.de
[PATCH] eicon ISDN driver: Kernelconfig
Main divas modules now may be build in-kernel.
4BRI cards are configured together with BRI cards.
ChangeSet@1.1217.9.15, 2003-09-09 13:01:52-07:00, armin@melware.de
[PATCH] eicon ISDN driver: endianess
fixed endianess errors in common code part.
ChangeSet@1.1217.9.14, 2003-09-09 13:01:45-07:00, armin@melware.de
[PATCH] eicon ISDN driver: list handling
Fixed internel list handling for modules built-in kernel.
ChangeSet@1.1217.9.13, 2003-09-09 13:01:36-07:00, armin@melware.de
[PATCH] eicon ISDN driver: debug
Module now can be build without debug code, necessary
if the module is built-in the kernel.
Fixed spelling typos.
ChangeSet@1.1217.9.12, 2003-09-09 13:01:28-07:00, armin@melware.de
[PATCH] eicon ISDN driver: capi code fix
Fix application memory allocation, module locking,
building in-kernel, use new internal debug api.
ChangeSet@1.1217.9.11, 2003-09-09 13:01:19-07:00, armin@melware.de
[PATCH] eicon ISDN driver: memory attach
Access to cards memory now uses macros to attach
to the correct memory area of the card.
ChangeSet@1.1217.1.3, 2003-09-10 05:52:19+10:00, anton@samba.org
Merge samba.org:/scratch/anton/linux-2.5
into samba.org:/scratch/anton/tmp3
ChangeSet@1.1217.10.2, 2003-09-09 21:11:38+02:00, benh@kernel.crashing.org
dmasound update from Christoph Hellwig
ChangeSet@1.1217.9.10, 2003-09-09 12:09:41-07:00, benh@kernel.crashing.org
[PATCH] IDE: Fix Power Management request race on resume
The current IDE Power Management code I wrote has a race on wakeup when
the master device got resumed, it may take a request. At this point, a
PM resume request to a slave device of the same hwgroup would clear
hwgroup->rq and cause an Oops when the master device request completes.
This patch fixes it. Due to the context in which PM resume requests are
sent, just not clearing hwgroup->rq for these is enough.
I also removed a useless debug message in the PM code that was
actually misleading (people though it indicated a problem while it
didn't, it's really useless) and fix a typo in a comment.
ChangeSet@1.1217.9.9, 2003-09-09 12:09:32-07:00, benh@kernel.crashing.org
[PATCH] IDE: Fix request handling with ide-default & ATAPI
This fixes a bug that happens when a request gets to the IDE layer for a
drive using ide-default (that is with no subdriver attached), like a
Power Management request. In this case, the core will wait for the
device status to match drive->read_stat, but that field contains by
default a value that is not suitable for ATAPI devices. This patch
fixes it.
ChangeSet@1.1217.3.26, 2003-09-09 11:55:09-07:00, jbarnes@sgi.com
[PATCH] ia64: cpumask_t fixes
This patch coverts a few spots to use cpumask_t instead of unsigned
long.
ChangeSet@1.1217.9.7, 2003-09-09 10:42:26-07:00, dhowells@redhat.com
[PATCH] AFS update
ChangeSet@1.1217.9.6, 2003-09-09 10:16:16-07:00, dhowells@redhat.com
[PATCH] RxRPC update
Here's a patch to update the RxRPC driver. Most of it is CodingStyle fixes,
but it also includes a few miscellaneous bug fixes. stdint types are also
turned into C99 forms (eg: u32 -> uint32_t).
ChangeSet@1.1217.9.5, 2003-09-09 10:16:07-07:00, eike-kernel@sf-tec.de
[PATCH] Fix typo in fs/Kconfig
ChangeSet@1.1217.9.4, 2003-09-09 10:15:58-07:00, axboe@suse.de
[PATCH] Fix blk_stop_queue bug
Benh saw some bugs where the queue would end up being in an invalid
state, and this could certainly explain one of them. We must not have a
stopped queue on the plug list, and blk_plug_device() right now will
happily plug a stopped queue.
We don't need to have it plugged either, blk_start_queue() will make
sure that request_fn gets run.
ChangeSet@1.1217.9.3, 2003-09-09 10:04:57-07:00, joe@perches.com
[PATCH] Add SEQ_START_TOKEN #define to seq_file.h
Code that includes seq_file.h uses a magic pointer "(void*)1"
to start a header seq_printf.
This patch adds a #define, so that people can start writing more
readable code.
ChangeSet@1.1217.9.2, 2003-09-09 09:46:25-07:00, jgarzik@pobox.com
[PATCH] Fix netdev close
This should fix the "ifconfig down ... ifconfig up" problems some
people have seen.
ChangeSet@1.1217.8.12, 2003-09-09 08:57:48-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix for proc/generic
ChangeSet@1.1217.8.11, 2003-09-09 08:56:12-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix for kmsg
ChangeSet@1.1217.8.10, 2003-09-09 08:55:27-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix for fat/file.c
ChangeSet@1.1217.8.9, 2003-09-09 08:54:47-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix for proc/misc
ChangeSet@1.1217.8.8, 2003-09-09 08:54:09-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix reboot
ChangeSet@1.1217.8.7, 2003-09-09 08:53:31-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix ext2_readlink
ChangeSet@1.1217.8.6, 2003-09-09 08:52:52-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix kcore
ChangeSet@1.1217.8.5, 2003-09-09 08:52:29-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix xattr
ChangeSet@1.1217.8.4, 2003-09-09 08:50:38-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix cpufreq
ChangeSet@1.1217.8.3, 2003-09-09 08:50:18-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix eventpoll
ChangeSet@1.1217.8.2, 2003-09-09 08:50:02-07:00, Andries.Brouwer@cwi.nl
[PATCH] sparse fix sysctl
ChangeSet@1.1217.8.1, 2003-09-09 08:49:53-07:00, Andries.Brouwer@cwi.nl
[PATCH] compilation fix ufs
Don't use C++ "argument declarations anywhere" in the kernel, even if
newer versions of gcc accept it.
ChangeSet@1.1217.7.5, 2003-09-09 15:23:36+01:00, rmk@flint.arm.linux.org.uk
[SERIAL] Introduce per-port capabilities.
This allows us to maintain quirks or capabilities on a per-port basis,
so we can handle buggy clones more effectively.
ChangeSet@1.1217.7.4, 2003-09-09 13:33:12+01:00, rmk@flint.arm.linux.org.uk
[SERIAL] Fix another missing irqreturn_t (clps711x.c)
ChangeSet@1.1217.7.3, 2003-09-09 13:26:47+01:00, rmk@flint.arm.linux.org.uk
[SERIAL] Convert serial config deps to select statements
The dependencies for CONFIG_SERIAL_CORE / CONFIG_SERIAL_CORE_CONSOLE
were becoming very messy. This cset converts the dependencies to
use "select" statements instead.
ChangeSet@1.1217.7.2, 2003-09-09 13:15:57+01:00, rmk@flint.arm.linux.org.uk
[SERIAL] Drop "level" argument from serial PM calls.
Since the driver model has transitioned away from using multi-level
device suspend/resume, we also drop the multi-level support from
the serial layer.
Update the 8250 and sa1100 drivers for this change.
ChangeSet@1.1217.7.1, 2003-09-09 11:07:00+01:00, rmk@flint.arm.linux.org.uk
Merge
ChangeSet@1.1153.89.7, 2003-09-09 09:00:09+01:00, davej@redhat.com
[AGPGART] Remove unreferenced extern
ChangeSet@1.1217.3.25, 2003-09-08 22:18:33-07:00, peterc@gelato.unsw.edu.au
[PATCH] ia64: unwind.c fix for spinlock-debug compilation
If you try to compile 2.6.0-test[45] with spinlock debugging on, then
unwind.c won't compile, because it uses a #define magic that hides
the variable in the spinlock debugging code (also called magic).
ChangeSet@1.1217.3.24, 2003-09-08 17:10:45-07:00, arun.sharma@intel.com
[PATCH] ia64: MINSIGSTKSZ on ia32
MINSIGSTKSZ is defined differently for i386 and ia64. This patch improves
compatibility with apps which use sigaltstack(2) with sizes between
MINSIGSTKSZ_IA32 and MINSIGSTKSZ.
ChangeSet@1.1217.3.23, 2003-09-08 16:29:54-07:00, suresh.b.siddha@intel.com
[PATCH] ia64: fix typo in spinlock.h
ChangeSet@1.1217.5.1, 2003-09-08 23:16:56+01:00, rmk@flint.arm.linux.org.uk
Merge flint.arm.linux.org.uk:/usr/src/bk/linux-2.6
into flint.arm.linux.org.uk:/usr/src/bk/linux-2.6-pcmcia
ChangeSet@1.1217.3.22, 2003-09-08 13:51:34-07:00, davidm@tiger.hpl.hp.com
Merge tiger.hpl.hp.com:/data1/bk/vanilla/linux-2.5
into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5
ChangeSet@1.1153.79.28, 2003-09-08 13:13:42-07:00, jbarnes@sgi.com
[PATCH] ia64: fix current usage in sn2 code
For some reason, we had a structure field called 'current'. This patch
fixes that.
ChangeSet@1.1153.79.27, 2003-09-08 13:12:55-07:00, jbarnes@sgi.com
[PATCH] ia64: misc. sn2 updates
Fix a couple of sn2 files.
ChangeSet@1.1153.89.6, 2003-09-08 21:01:36+01:00, davej@redhat.com
[AGPGART] Fix ATI GART for IGP9100/R300
From the folks at ATI. Some chips hang with this flush.
ChangeSet@1.1217.3.21, 2003-09-08 12:45:46-07:00, torvalds@home.osdl.org
Linux 2.6.0-test5
TAG: v2.6.0-test5