ChangeSet@1.1568.2.4, 2004-01-04 20:51:41+00:00, rmk@flint.arm.linux.org.uk
  [ARM] Report more detail when unable to resolve module relocations.

ChangeSet@1.1568.2.3, 2004-01-04 20:06:39+00:00, rmk@flint.arm.linux.org.uk
  [ARM] Kill dma-isa.c warning.

ChangeSet@1.1568.2.2, 2004-01-04 17:29:23+00:00, rmk@flint.arm.linux.org.uk
  [ARM] Fix cachepolicy=<foo>
  
  On ARM, it is possible to configure the desired cache policy in
  the page tables.  Unfortunately, we haven't been updating the
  protection_map nor PAGE_KERNEL, so this option doesn't change
  the behaviour of the majority of mappings.  This cset corrects
  this oversight.

ChangeSet@1.1568.2.1, 2004-01-04 16:49:04+00:00, rmk@flint.arm.linux.org.uk
  [ARM] Fix more gcc3 build errors.

ChangeSet@1.1571, 2004-01-04 16:28:39+00:00, amitg@edu.rmk.(none)
  [SERIAL] EISA ID for PnP modem
  
  Patch from: Amit Gurdasani
  
  I have a PROLiNK 1456VH internal Rockwell-based ISA PnP K56flex fax modem
  whose EISA ID seems not to be known to 8250_pnp.c. The ID is AEI0250 as
  reported in /sys/devices/pnp1/01:01/01:01.00/id and adding this into the
  pnp_dev_table[] allows the device to be found and enabled properly by the
  8250 serial driver.

ChangeSet@1.1568.1.2, 2004-01-03 18:25:13-08:00, torvalds@home.osdl.org
  Fix IDE "PIO WRITE wait for ready" test under extreme interrupt load.
  
  From Daniel Tram Lux: under extreme irq load on an underpowered CPU,
  the timeout loop may not make any progress, and decide that a timeout
  occurred before it has actually tested the status register.
  
  The minimal fix for now is to just have a final test _after_ the timeout
  to remove the problem. The real fix would likely be to not have irqs
  enabled between reading the status and the timeout. 

ChangeSet@1.1568.1.1, 2004-01-02 20:57:06-08:00, ak@muc.de
  [PATCH] Fix memset on x86-64
  
  The memset for C stepping K8 was broken. This broke mainly CONFIG_SLAB_DEBUG
  because memset(...., 0, ...) still worked correctly.
  
  Thanks to Manfred Spraul for giving me the right cue.

ChangeSet@1.1570, 2004-01-02 19:36:52+00:00, rmk@flint.arm.linux.org.uk
  [SERIAL] Remove old RSA resource handlign.
  
  The resource handling left in autoconfig() is plainly wrong, since
  we've already claimed the necessary resources prior to calling
  autoconfig().  Therefore, we remove the superfluous code from
  autoconfig().

ChangeSet@1.1569, 2004-01-02 19:25:32+00:00, rene.herman@nl.rmk.(none)
  [SERIAL] add PnP ID to 8250_pnp.c
  
  Patch from: Rene Herman
  
  This patch adds the PnP ID for the E-Tech CyberBULLET PC56RVP.

ChangeSet@1.1568, 2004-01-01 11:41:03-08:00, ak@muc.de
  [PATCH] X86-64 merge
  
  At least one of them is critical. It fixes an path in the IOMMU that
  I broke with the ealier "fullflush" workaround.
  
   - Check for ~/bin/installkernel like i386 (M. Bligh) 
   - Implement 32bit RTC_IRQ_SET correctly (Lutz Vieweg)
   - Disable some useless printks in 32bit emulation
   - Warning fixes for mixed C99 style declarations/statements.
   - Sync lAPIC power management with i386
   - Use topology sysfs like i386
   - Fix some serious bugs in the MCE handler. ECC should
     be decoded correctly now.
   - Add oops=panic option to panic on Oopses.
   - Fix hackish code in head.S
   - Add missing options in IOMMU
   - Fix _syscall6 (Olaf Hering)
   - Remove broken ACPI locking code. Port IA64 C version.
   - Make safe_smp_processor_id() more reliable
   - Read HPET in vsyscall code
   - Add workaround for BIOS that corrupt 64bit registers in HLT
   - Fix unaligned access in bitops.h
   - Remove broken ntp drift correction code for now
   - i386 merge in SCI setup
   - Fix wrong offset in callin.h (Jim Houston)
   - Minor comment fixes

ChangeSet@1.1562.1.7, 2004-01-01 11:25:32-08:00, hunold@linuxtv.org
  [PATCH] DVB: Fix memory usage of ttpci driver
  
   - do not allocate firmware buffer if firmware is compiled into the
     driver.  Saves 220KB vmem (Andreas Oberritter)

ChangeSet@1.1562.1.6, 2004-01-01 11:25:24-08:00, hunold@linuxtv.org
  [PATCH] DVB: Revamp of the TTUSB-DEC driver
  
   - Alter hotplug firmware naming to fit in with dvb standard.
   - Use the hotplug firmware loader for 2.6 kernels instead of compiling
     the firmware into the module. 
   - Integrate frontend into ttusb_dec module and remove pseudo-i2c bits,
     move ttusb_dec header into source file.
   - Rudimentary section filter support (enough for scan).

ChangeSet@1.1562.1.5, 2004-01-01 11:25:13-08:00, hunold@linuxtv.org
  [PATCH] DVB: Add static firmware compilation again
  
   - add Kconfig magic to select a firmware that can be compiled into the
     driver
   - add some hooks to av7110 to compile a firmware into the driver again

ChangeSet@1.1562.1.4, 2004-01-01 11:25:04-08:00, hunold@linuxtv.org
  [PATCH] DVB: Fixes for frontend drivers
  
   - ves1820: increase mdelay from 30 to 50 to be more reliable with bad
     reception quality (Andreas Oberritter)
   - dst: remove AUTO_INVERSION for capabilities, allow params
     dst_type_flags and dst_type to have multiple values for multiple
     cards in one machine (Jamie Honan)

ChangeSet@1.1562.1.3, 2004-01-01 11:24:56-08:00, hunold@linuxtv.org
  [PATCH] DVB: Fix feed list handling bugs in demux
  
   - corrected handling of feed lists (Andres Oberritter)

ChangeSet@1.1562.1.2, 2004-01-01 11:24:46-08:00, hunold@linuxtv.org
  [PATCH] DVB: Update documentation and credits
  
   - add new documentation for getting bt8xx based DVB cards runnig
   - extend contributors list
   - change various email addresses in header files

ChangeSet@1.1562.1.1, 2004-01-01 11:07:05-08:00, torvalds@home.osdl.org
  Remove dead files
  
  Noted by Keith Owens.

ChangeSet@1.1566, 2003-12-31 23:34:35-08:00, davidm@tiger.hpl.hp.com
  ia64: Update defconfig.

ChangeSet@1.1565, 2003-12-31 23:33:55-08:00, davidm@tiger.hpl.hp.com
  ia64: Rename efi_get_time() in the simulator's firmware-emulator to avoid
  	name-clash with declaration of routine of the same name in
  	<linux/efi.h>.

ChangeSet@1.1564, 2003-12-31 23:29:50-08:00, davidm@tiger.hpl.hp.com
  ia64: Merge patch by Arun Sharma: hook up lots of ia32 syscalls.

ChangeSet@1.1529.1.5, 2003-12-31 23:23:38-08:00, davidm@tiger.hpl.hp.com
  ia64: fix perfmon bug causing lost samples
  
  	Patch from Stephane: Fix a bug in perfmon_default_smpl.c by
  	which we would systematically lose one sample at every buffer
  	overflow.

ChangeSet@1.1529.1.4, 2003-12-31 23:21:34-08:00, davidm@tiger.hpl.hp.com
  ia64: Remove the old ia64_ni_syscall()/sys32_ni_syscall() routines which
  	are overly verbose and replace them with calls to sys_ni_syscall().

ChangeSet@1.1529.1.3, 2003-12-31 23:18:59-08:00, davidm@tiger.hpl.hp.com
  ia64: Allow system-call number to be changed during system-call tracing
  	(both for native and x86 system call tracing).  This is needed
  	by recent versions of strace and UML likes to do that, too.

ChangeSet@1.1529.1.2, 2003-12-31 23:15:39-08:00, davidm@tiger.hpl.hp.com
  ia64: Rearrange ia64_do_signal() such that it is possible for a debugger to
  	cancel system-call restart.

ChangeSet@1.1562, 2003-12-31 16:41:45-08:00, rmk+lkml@arm.linux.org.uk
  [PATCH] Fix "echo -n 3 > /sys/.../power/state"
  
  Fix what seems to be a typo preventing .../power/state from working.

ChangeSet@1.1561, 2003-12-31 15:26:09-08:00, James.Bottomley@SteelEye.com
  [PATCH] MSI broke voyager build
  
  The x86 build depends on NR_VECTORS being defined. 
  
  This symbol, however, was put only into mach-default/irq_vectors.h
  
  The attached patch adds it to voyager too.

ChangeSet@1.1559, 2003-12-31 10:37:20-08:00, pe1rxq@amsat.org
  [AX25]: Missing spin_unlock() and recvmsg reported dst instead of src.

ChangeSet@1.1558, 2003-12-31 10:36:04-08:00, yoshfuji@linux-ipv6.org
  [NET]: Fix comment type in skbuff.h

ChangeSet@1.1557, 2003-12-31 10:35:44-08:00, bdschuym@pandora.be
  [BRIDGE]: Fix build with vlan disabled, spurious ifdef.

ChangeSet@1.1556, 2003-12-31 10:19:13-08:00, davem@nuts.ninka.net
  Merge nuts.ninka.net:/disk1/davem/BK/netleak-2.5
  into nuts.ninka.net:/disk1/davem/BK/net-2.6

ChangeSet@1.1529.1.1, 2003-12-31 01:10:09-08:00, davidm@tiger.hpl.hp.com
  ia64: Fix a ptrace-bug that caused "strace -f" to crash the inferior
        process.  The root-cause of the problem was that ptrace() tried
        to copy the portion of the register backing store that landed on
        the kernel stack back to users-space, but the resulting state
        was inconsistent if the inferior process was in the middle of a
        system-call (as would always be the case for strace).
  
        The solution is to avoid all needless copying and to instead
        ensure that when accessing a memory location that may belong to
        a thread's register-backing store, we attach to that particular
        thread, rather than the thread identified by the PID argument.
        If the thread happens to be unattachable, we fall back to using
        the thread identified by the PID argument.  This should have the
        desired effect if the thread has terminated already and if the
        thread is running while ptrace() is trying to access its state,
        all bets are off anyhow and there are no coherency guarantees.
        In other words, this should be doing the right thing under all
        circumstances.
  
        The patch also fixes the case where PT_AR_BSP and/or PT_CFM are
        written while the inferior process is in the middle of a system
        call.  This makes arguments passed to GDB inferior calls come
        out right.
  
        The patch was tested with strace -f and the GDB testsuite, which
        showed no regressions compared to the previous version of the
        kernel.

ChangeSet@1.1555, 2003-12-30 22:24:31-08:00, torvalds@home.osdl.org
  Remove generated files from revision control

ChangeSet@1.1553, 2003-12-30 21:27:50-08:00, davem@nuts.ninka.net
  [SPARC64]: Update defconfig.

ChangeSet@1.1552, 2003-12-30 21:26:44-08:00, davem@nuts.ninka.net
  [MEDIA]: ttusb_dec.c needs linux/init.h

ChangeSet@1.1550.1.2, 2003-12-30 20:44:13-08:00, torvalds@home.osdl.org
  Linux 2.6.1-rc1
  TAG: v2.6.1-rc1