ChangeSet@1.2280, 2005-01-10 16:12:13-08:00, torvalds@ppc970.osdl.org
Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.2279, 2005-01-10 15:18:02-08:00, roland@redhat.com
[PATCH] fix __ptrace_unlink TASK_TRACED recovery for real parent
The __ptrace_unlink code that checks for TASK_TRACED fixed the problem of a
thread being left in TASK_TRACED when no longer being ptraced.
However, an oversight in the original fix made it fail to handle the
case where the child is ptraced by its real parent.
Fixed thus.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.1.7, 2005-01-10 22:26:38+00:00, rpurdie@net.rmk.(none)
[ARM PATCH] 2366/1: PXA: Add machine type detection for the Sharp SL-C7xx series
Patch from Richard Purdie
The Sharp SL-C7xx series of PDAs (Corgi, Shepherd, Husky) don't set
the machine type upon startup. Fixing this isn't possible as the
devices have been produced and the bootloaders are in ROM.
This header code detects the differences between them and sets the
machine type accordingly. By doing this one kernel can support the
series of PXA25x machines.
The code also detects Poodle (Sharp SL-5600) which is also a PXA25x
device allowing a common kernel to support that device as well. (The
base machine code is under development for this device).
Signed-off-by: Richard Purdie
Signed-off-by: Russell King
ChangeSet@1.2272.1.6, 2005-01-10 22:19:47+00:00, rpurdie@net.rmk.(none)
[ARM PATCH] 2371/1: PXA: Add machine support for the Sharp SL-C7xx series of PDAs
Patch from Richard Purdie
Add base machine support for the Sharp SL-C7xx series of PDAs
(Corgi - SL-C700, Shepherd - SL-C750 and Husky - SL-C760). See
linux-arm-kernel for a support commitment for this code.
Depends on 2370/1 (SCOOP Driver).
Signed-off-by: Richard Purdie
Signed-off-by: Russell King
ChangeSet@1.2272.1.5, 2005-01-10 22:07:21+00:00, rpurdie@net.rmk.(none)
[ARM PATCH] 2370/1: Add common Sharp SCOOP driver code
Patch from Richard Purdie
Add common driver code for the SCOOP I/O interface found on various
Sharp PDAs (Collie, Poodle and Corgi models). It will be used by
both SA1100 and PXA machines.
[A patch to update Collie to use this driver will follow.]
Signed-off-by: Richard Purdie
Signed-off-by: Russell King
ChangeSet@1.2272.1.4, 2005-01-10 21:48:31+00:00, ben-linux@org.rmk.(none)
[ARM PATCH] 2374/1: S3C2410 - remove unused code from entry-macro.S
Patch from Ben Dooks
Remove code for decoding LCD Frame/FIFO IRQs
from the include/asm-arm/arch-s3c2410/entry-macro.S
file.
These are not currently implemented, and should be
decoded by a chained IRQ handler from the irq
code.
Signed-off-by: Ben Dooks
Signed-off-by: Russell King
ChangeSet@1.2278, 2005-01-10 13:46:50-08:00, torvalds@ppc970.osdl.org
Revert moxa status update
As Alan says:
"The '1.8' version is for the Moxa mxser driver. Moxa haven't
released any 2.6 driver for the ancient 'smartio' hardware"
so the smartio driver stil remains valid.
Cset exclude: james4765@gmail.com[torvalds]|ChangeSet|20050108220924|25457
ChangeSet@1.2272.1.3, 2005-01-10 21:28:56+00:00, ben-linux@org.rmk.(none)
[ARM PATCH] 2373/1: S3C2410 - fix possible loop in irq macro
Patch from Ben Dooks
If we read the INTPEND register and get the wrong
result (details below) then it looks like a possible
loop to go back and re-read it after calculating
the possible correct value for it.
It seems that the INTPEND register, which should
show the unique number of the interrupt that we
need to handle. However, it seems that this register
can show the wrong interrupt under certain conditions.
Shannon's research shows that it is very possible that
the occurence of an external interrupt can end up
merging with the base interrupt number, causing
the wrong result in the register.
This patch also fixes the end position of the #ifdef
block and ensures as many registers as possible are
stacked before calling printk() for debug.
Original patch for 2.6.9 by Shannon Holland re-written
for 2.6.10 by Ben Dooks.
Signed-off-by: Shannon Holland
Signed-off-by: Ben Dooks
Signed-off-by: Russell King
ChangeSet@1.2277, 2005-01-10 13:25:12-08:00, tony.luck@intel.com
[PATCH] Document "new" ia64 maintainer
David handed over the keys a few months ago. Time to make sure everyone
knows to send stuff to me.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.1.2, 2005-01-10 21:23:00+00:00, ben-linux@org.rmk.(none)
[ARM PATCH] 2372/1: S3C2410 - remove s3c2410_clock_tick_rate
Patch from Ben Dooks
This is an old definition, and is no longer used anywhere.
Add a comment to that effect in the header file
include/asm-arm/arch-s3c2410/timex.h and remove all other
references.
Thanks to Klaus Fetscher for pointing out that it isn't
used anymore
Signed-off-by: Ben Dooks
Signed-off-by: Russell King
ChangeSet@1.2272.5.1, 2005-01-10 11:36:46-08:00, greg@kroah.com
Merge kroah.com:/home/greg/linux/BK/bleed-2.6
into kroah.com:/home/greg/linux/BK/i2c-2.6
ChangeSet@1.2272.4.1, 2005-01-10 11:28:21-08:00, greg@kroah.com
Merge kroah.com:/home/greg/linux/BK/bleed-2.6
into kroah.com:/home/greg/linux/BK/usb-2.6
ChangeSet@1.2272.2.20, 2005-01-10 11:23:42-08:00, torvalds@ppc970.osdl.org
Clean up stack growth checks and move them into a common function.
The grows-up and grows-down cases had all the same issues, but
differered in the details. Additionlly, historical evolution of
the tests had caused the result to be pretty unreadable with some
rather long and complex conditionals.
Fix it all up in a more readable helper function.
This also adds the missing RLIMIT_MEMLOCK test.
ChangeSet@1.2272.2.18, 2005-01-10 09:47:42-08:00, hirofumi@mail.parknet.co.jp
[PATCH] NLS: Fix overflow of nls_ascii
The nls_ascii conversion table is just for 128 entries, but should be
256.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.17, 2005-01-10 09:31:50-08:00, torvalds@ppc970.osdl.org
Make it clear that GFP_ZERO does not work with atomic highmem allocations.
We use a non-atomic kmap() to clear the page, which cannot be
used from atomic contexts.
ChangeSet@1.2272.2.16, 2005-01-10 09:20:09-08:00, torvalds@ppc970.osdl.org
Don't use __GFP_CLEAR for user pages.
It doesn't do the virtual cache synchronization that clear_user_highpage()
does.
Pointed out by Hugh Dickins.
ChangeSet@1.2272.2.15, 2005-01-10 09:02:01-08:00, torvalds@ppc970.osdl.org
Map new page allocations as part of "prep_new_page".
This not only makes sense, it fixes DEBUG_PAGEALLOC together with
the new page zeroing, since we must map the page before we zero it.
As per Chris Wright.
ChangeSet@1.2272.3.1, 2005-01-10 08:52:36-08:00, greg@kroah.com
Merge kroah.com:/home/greg/linux/BK/bleed-2.6
into kroah.com:/home/greg/linux/BK/pci-2.6
ChangeSet@1.2272.2.14, 2005-01-10 08:51:25-08:00, ak@suse.de
[PATCH] Fix gcc 4 compilation in bttv
extern declaration of static
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.13, 2005-01-10 08:51:10-08:00, ak@suse.de
[PATCH] Fix gcc 4 compilation in drivers/eisa
Drop -Werror to allow compilation with gcc 4
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.12, 2005-01-10 08:50:57-08:00, ak@suse.de
[PATCH] Fix gcc 4 compilation in DRM
extern declaration of static
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.11, 2005-01-10 08:50:42-08:00, ak@suse.de
[PATCH] Fix gcc 4 compilation in ACPI
extern declaration of static
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.10, 2005-01-10 07:59:23-08:00, gerg@snapgear.com
[PATCH] m68knommu: optimize atomic macros
For some reason the asm versions of atomic_dec_and_test and friends were
masked by inefficient and big macros. With it I spare up to 8k in the text
size of my coldfire linux and 5k on my cpu32 version.
Patch originally submitted by Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.9, 2005-01-10 07:59:09-08:00, gerg@snapgear.com
[PATCH] m68knommu: new hardware support and optimizations for the ColdFire serial driver
A number of small updates to the ColdFire serial driver:
. support the SNEHA platform
. set the default baud rate for console different on the FEITH boards
. add support for the 527x ColdFire CPU's
. schedule_timeout() should not add in current jiffies value
. optimize way that receive error characters are processed
. fix condition where receiver interrupts could be left disabled after flush
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.8, 2005-01-10 07:58:56-08:00, gerg@snapgear.com
[PATCH] m68knommu: remove duplicate THREAD_SIZE define
Remove duplicated definition of THREAD_SIZE, it is defined in page.h.
Also modify asm constraints to explicilty let gas know that the input
arg is a constant in the current_thread_info() function.
Patch originally submitted by Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.7, 2005-01-10 07:58:41-08:00, gerg@snapgear.com
[PATCH] m68knommu: definitions for the SDRAM registers on the ColdFire 528x CPU's
Add definitions for the SDRAM configuration registers on the 528x
ColdFire CPU's.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.6, 2005-01-10 07:58:28-08:00, gerg@snapgear.com
[PATCH] m68knommu: define differences in ColdFire 5270/1 and 5274/5 SDRAM registers
The 527[01] ColdFire devices and the 527[45] devices have a very similar
SDRAM register setup. But some registers are at different addresses.
Define them appropriately so common sizing code can work for all ColdFire
platforms.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.5, 2005-01-10 07:58:12-08:00, gerg@snapgear.com
[PATCH] m68knommu: move ColdFire 5249 platform specific startup code
Move some platform specific setup code into the ColdFire 5249 header.
Doing this for platforms that needs it means the startup code can be
identical for all ColdFire based platforms.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.4, 2005-01-10 07:57:59-08:00, gerg@snapgear.com
[PATCH] m68knommu: change ColdFire 5206 SDRAM register names
Change the SDRAM register names to be consistent across all ColdFire
header files. Simplied their use in common memory sizing code at
startup time.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.3, 2005-01-10 07:57:44-08:00, gerg@snapgear.com
[PATCH] m68knommu: cache init code for ColdFire CPU's
Cache initialization code for the ColdFire CPU's. They are not
all identical. This code is used as part of the common head
start code for all ColdFire platforms.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.2, 2005-01-10 07:57:28-08:00, gerg@snapgear.com
[PATCH] m68knommu: common head code for all ColdFire platforms
Create a common head.S for all ColdFire architecture platforms.
Currently there is 20 (yep 20 of them), and they are 95% the
same code. This file with some header file support will replace
all of them.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.2.1, 2005-01-10 07:46:04-08:00, david@gibson.dropbear.id.au
[PATCH] ppc64: hugepage bugfix
Fix a stupid unbalanced lock bug in the ppc64 hugepage code. Lead
rapidly to a crash if both CONFIG_HUGETLB_PAGE and CONFIG_PREEMPT were
enabled (even without actually using hugepages at all).
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2272.1.1, 2005-01-10 11:34:40+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add missing nodemask.h includes
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.455.6, 2005-01-09 23:00:42-08:00, greg@kroah.com
PCI Hotplug: remove my old email address
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2273, 2005-01-09 21:14:10-08:00, davem@nuts.davemloft.net
Merge nuts.davemloft.net:/disk1/BK/network-2.6
into nuts.davemloft.net:/disk1/BK/net-2.6
ChangeSet@1.2272, 2005-01-09 17:36:05-08:00, gerg@snapgear.com
[PATCH] m68knommu: include module.h to cleanup warnings in checksum.c
Include module.h to cleanup compiler warnings.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2271, 2005-01-09 17:35:53-08:00, gerg@snapgear.com
[PATCH] m68knommu: remove use of obsolete MAP_NR macro processor.h
Remove use of obsolate MAP_NR macro.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2270, 2005-01-09 17:35:39-08:00, gerg@snapgear.com
[PATCH] m68knommu: remove unused include/asm-m68knommu/nap.h
Remove unused header file from include/asm-m68knommu.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2269, 2005-01-09 17:35:26-08:00, gerg@snapgear.com
[PATCH] m68knommu: convert use of KTHRAD_SIZE to THREAD_SIZE in process.c
Convert KTHREAD_SIZE to THREAD_SIZE.
Patch original submitted by Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2268, 2005-01-09 17:35:10-08:00, gerg@snapgear.com
[PATCH] m68knommu: optimized bitops operations for m68knommu
Here is a patch to provide faster bitops for m68knommu, using bset/bclr/bchg
and btst instructions, that do test-and-set on m68k and coldfire processors.
We do thus avoid the need for local_irq_save/local_irq_restore.
Patch original submitted by Philippe De Muyter <phdm@macqel.be>.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2267, 2005-01-09 17:34:56-08:00, gerg@snapgear.com
[PATCH] m68knommu: convert KTHRAD_SIZE to THREAD_SIZE and remove unused macros
Convert KTHREAD_SIZE to THREAD_SIZE.
Remove obsolate MAP_NR and VALID_PAGE macros.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2266, 2005-01-09 17:34:42-08:00, gerg@snapgear.com
[PATCH] m68knommu: comment formating change to linker script
Fix comment formatting in m68knommu linker script.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2265, 2005-01-09 17:34:30-08:00, gerg@snapgear.com
[PATCH] m68knommu: export lib udelay symbol for modules
Export the udelay symbol so modules get access to it as well.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2264, 2005-01-09 17:34:17-08:00, gerg@snapgear.com
[PATCH] m68knommu: remove duplicate and unused entries in Kconfig
Remove duplicate M5275EVB entry.
Remove unused HIMEMKERNEL config option.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2263, 2005-01-09 17:34:02-08:00, gerg@snapgear.com
[PATCH] m68knommu: remove unused keyboard.h
Remove unused keyboard.h include.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2262, 2005-01-09 17:33:49-08:00, gerg@snapgear.com
[PATCH] m68knommu: remove unneccessary SUN conditionals from m68knommu/elf.h
Remove unneccessary SUN conditionals from m68knommu elf.h.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2261, 2005-01-09 17:33:33-08:00, gerg@snapgear.com
[PATCH] m68knommu: remove use of obsolete MAP_NR macro
Remove use of obsolete MAP_NR macro.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2259, 2005-01-10 00:17:05+00:00, nico@org.rmk.(none)
[ARM PATCH] 2369/1: remove some cruft
Patch from Nicolas Pitre
Those defines are incomplete and not using them by
instead using the explicit flags makes for clearer code.
Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King
ChangeSet@1.2258, 2005-01-09 23:57:38+00:00, rmk@flint.arm.linux.org.uk
[ARM] Move common CPU initialisation into head.S
ChangeSet@1.2257, 2005-01-09 19:39:16+00:00, rmk@flint.arm.linux.org.uk
[ARM] Rehash initial kernel setup code.
Essentially, this set of changes:
1. makes the register usage in head.S more sane
2. makes way for passing the location of the tagged list via "r2"
(as the booting document suggests)
ChangeSet@1.2256, 2005-01-09 11:23:21+00:00, rmk@flint.arm.linux.org.uk
[ARM] Minor white space cleanup
ChangeSet@1.2255, 2005-01-09 11:13:19+00:00, rmk@flint.arm.linux.org.uk
[ARM] Ensure we do not remap pages outside the allocated range.
ChangeSet@1.2254, 2005-01-08 20:26:48-08:00, torvalds@evo.osdl.org
Re-use the buffer page for pipe data.
This brings the latency back to previous levels, and in
fact seems to drive it a bit lower.
ChangeSet@1.2253, 2005-01-08 19:59:53-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] SDLA firmware upgrade should require CAP_SYS_RAWIO (not just CAP_NET_ADMIN)
There were a few variants on the list trying to work out what the valid
ranges to verify for write are but they sort of missed the point, if you
can load new firmware you can have fun anyway.
ChangeSet@1.2252, 2005-01-08 17:10:33-08:00, torvalds@ppc970.osdl.org
Merge bk://gkernel.bkbits.net/libata-2.6
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.2251, 2005-01-08 17:09:19-08:00, torvalds@ppc970.osdl.org
Merge bk://gkernel.bkbits.net/net-drivers-2.6
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.2250, 2005-01-08 17:05:23-08:00, torvalds@ppc970.osdl.org
Merge bk://gkernel.bkbits.net/misc-2.6
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.2247.7.206, 2005-01-08 16:06:16-08:00, akpm@osdl.org
[PATCH] Fix ppc64 !HOTPLUG_CPU build
idle_task_exit() only exists when CONFIG_HOTPLUG_CPU is enabled
ChangeSet@1.2247.7.205, 2005-01-08 14:35:06-08:00, bunk@stusta.de
[PATCH] OSS: misc cleanups
The patch below contains cleanups under sound/oss/ including the
following:
- make needlessly global code static
- kill cs4232.h (it contained two function prototypes: one is now static
and the other one was already stale)
- removed the following unused global functions:
- cs4232.c: init_cs4281
- emu10k1/hwaccess.c: sumVolumeToAttenuation
- emu10k1/hwaccess.c: emu10k1_set_stop_on_loop
- sb_common.c: sb_dsp_disable_midi
- sb_common.c: sb_dsp_disable_recording
- wavfront.c: attach_wffx
- cs46xx.c: #ifndef CS46XX_ACPI_SUPPORT cs46xx_pm_callback
- emu10k1/hwaccess.c: #ifdef DBGEMU emu10k1_writefn0_2
- opl3sa2.c: remove the unused struct opl3sa2_dev
- removed the following unused EXPORT_SYMBOL's:
- ac97.c: ac97_set_mixer
- ac97.c: ac97_get_register
- ac97.c: ac97_get_mixer_scaled
- sb_common.c: sb_dsp_disable_midi
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.204, 2005-01-08 14:34:47-08:00, bunk@stusta.de
[PATCH] init/initramfs.c: make unpack_to_rootfs static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.203, 2005-01-08 14:34:30-08:00, a.othieno@bluewin.ch
[PATCH] arch/alpha/Kconfig: Kill stale reference to Documentation/smp.tex
This reference to the long gone Documentation/smp.tex somehow evaded
Randy's cleanup from circa March. This marks off the last of those stale
references.
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.202, 2005-01-08 14:34:14-08:00, bunk@stusta.de
[PATCH] bttv-driver.c: make some variables static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.201, 2005-01-08 14:33:56-08:00, wli@holomorphy.com
[PATCH] remove CT_TO_SECS()/CT_TO_USECS()
CT_TO_SECS() and CT_TO_USECS() are used nowhere in the tree. This patch
removes them.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.200, 2005-01-08 14:33:39-08:00, bunk@stusta.de
[PATCH] remove IN_STRING_C
IN_STRING_C was an i386-specific hack by Andi Kleen to provide out-of-line
versions of some lib/string.c functions that aren't directly used on i386
(because there are inline assembly versions).
This can cause problems if gcc chooses to transparently replace a call to one
string function with a call to another string function (the example Andi gave
was a replacement of a sprintf call with a strcpy call) which generates a
function call to the replacement function.
The problems observed by Andi only occur in recent kernels without
-fno-unit-at-a-time.
With -ffreestanding it can't even cause any problems in case we'd one day drop
the -fno-unit-at-a-time since gcc mustn't assume in a freestanding environment
that all standard C library functions are available.
The effect of this patch is a small space saving in the kernel.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.199, 2005-01-08 14:33:23-08:00, bunk@stusta.de
[PATCH] scsi/aic7xxx/: remove two useless variables
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.198, 2005-01-08 14:33:07-08:00, bunk@stusta.de
[PATCH] remove unused include/asm-m68k/adb_mouse.h
Remove a completely unused header file.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.197, 2005-01-08 14:32:50-08:00, chrisw@osdl.org
[PATCH] binfmt_script.c: make em86_format static
This patch by Chris Wright <chrisw@osdl.org> makes the needlessly global
struct em86_format static.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.196, 2005-01-08 14:32:35-08:00, bunk@stusta.de
[PATCH] befs: #if 0 two unused global functions
The patch below #if 0's two unussed global functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.195, 2005-01-08 14:32:17-08:00, bunk@stusta.de
[PATCH] AFS: afs_voltypes isn't always required
afs_voltypes is only used #ifdef __KDEBUG, and even then it doesn't has to be
a global symbol.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.194, 2005-01-08 14:32:00-08:00, bunk@stusta.de
[PATCH] cris: remove kernel 2.0 #ifdef's
Remove some kernel 2.0 #ifdef's from arch/cris/arch-v10/kernel/fasttimer.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.193, 2005-01-08 14:31:43-08:00, olh@suse.de
[PATCH] fix typo and email in SAK.txt
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.192, 2005-01-08 14:31:26-08:00, bunk@stusta.de
[PATCH] some parport_pc.c cleanups
The patch below makes the following changes to
drivers/parport/parport_pc.c :
- make some needlessly global functions static
- #if 0 two currently unused functions
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.191, 2005-01-08 14:31:09-08:00, bunk@stusta.de
[PATCH] prism54: small prismcompat cleanup
- the FW_LOADER is already guaranteed through the Kconfig file
- prism54_synchronize_irq is also #define'd to synchronize_irq
in prismcompat24.h, so there's no need for it
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.190, 2005-01-08 14:30:52-08:00, bunk@stusta.de
[PATCH] sched.c: remove an unused function
The patch below removes an unused function from kernel/sched.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.189, 2005-01-08 14:30:35-08:00, bunk@stusta.de
[PATCH] scsi/aic7xxx/aic79xx_osm.c: remove an unused function
The patch below removes an unused function from
drivers/scsi/aic7xxx/aic79xx_osm.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.188, 2005-01-08 14:30:18-08:00, bunk@stusta.de
[PATCH] scsi/ahci.c: remove an unused function
The patch below removes an unused function from drivers/scsi/ahci.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.187, 2005-01-08 14:30:01-08:00, bunk@stusta.de
[PATCH] sched.c: remove an unused macro
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.186, 2005-01-08 14:29:45-08:00, bunk@stusta.de
[PATCH] DVB av7110_hw.c: remove unused functions
The patch below removes three unused functions from
drivers/media/dvb/ttpci/av7110_hw.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.185, 2005-01-08 14:29:27-08:00, bunk@stusta.de
[PATCH] OSS: remove unused functions
The patch below removes some unused functions from OSS.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.184, 2005-01-08 14:29:10-08:00, bunk@stusta.de
[PATCH] mark QNX4FS_RW as BROKEN
Anders Larsen wrote:
If you remove any code inside the #ifdef CONFIG_QNX4FS_RW we might as well
remove the option "config QNX4FS_RW" altogether. It's horribly broken, and
I don't intend to fix it; while I was thinking about how to properly
implement write-support, somebody else went away and did it. As that
alternative seems to work well and is being actively maintained, I won't try
to reinvent it.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.183, 2005-01-08 14:28:57-08:00, ptushnik@gmail.com
[PATCH] Fix kernel/timer.c comment typo
Signed-off-by: Vasia Pupkin <ptushnik@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.182, 2005-01-08 14:28:40-08:00, bunk@stusta.de
[PATCH] small proc_fs cleanups
The patch below does the following cleanups in the proc_fs code:
- remove an unused global function
- make two functions static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.181, 2005-01-08 14:28:23-08:00, bunk@stusta.de
[PATCH] devpts/inode.c: make one struct static
The patch below makes struct devpts_file_inode_operations in fs/devpts/inode.c
static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.180, 2005-01-08 14:28:05-08:00, bunk@stusta.de
[PATCH] bio.c: make bio_destructor static
bio_destructor in fs/bio.c isn't used outside of this file, and after quickly
thinking about it I didn't find a reason why it should.
The patch below makes it static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.179, 2005-01-08 14:27:43-08:00, bunk@stusta.de
[PATCH] binfmt_script.c: make struct script_format static
The patch below makes struct script_format in fs/binfmt_script.c static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.178, 2005-01-08 14:27:26-08:00, bunk@stusta.de
[PATCH] ISDN b1pcmcia.c: remove an unused variable
drivers/isdn/hardware/avm/b1pcmcia.c: In function `b1pcmcia_init':
drivers/isdn/hardware/avm/b1pcmcia.c:203: warning: unused variable `err'
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.177, 2005-01-08 14:27:08-08:00, bunk@stusta.de
[PATCH] video drivers: remove unused functions
The patch below removes some unused function from drivers/video/
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.176, 2005-01-08 14:26:51-08:00, bunk@stusta.de
[PATCH] watchdog/machzwd.c: remove unused functions
The patch below removes unused functions from drivers/char/watchdog/machzwd.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.175, 2005-01-08 14:26:34-08:00, bunk@stusta.de
[PATCH] NFS: remove an unused function
The patch below removes an unused function from fs/nfsd/nfs3xdr.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.174, 2005-01-08 14:26:17-08:00, bunk@stusta.de
[PATCH] media/video/ir-kbd-i2c.c: remove an unused function
The patch below removes an unused function from
drivers/media/video/ir-kbd-i2c.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.173, 2005-01-08 14:26:00-08:00, bunk@stusta.de
[PATCH] floppy.c: remove an unused function
The patch below removes an unused function from drivers/block/floppy.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.172, 2005-01-08 14:25:43-08:00, bunk@stusta.de
[PATCH] DRM: remove unused functions
The patch below removes two unused functions from DRM.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.171, 2005-01-08 14:25:21-08:00, rddunlap@osdl.org
[PATCH] IPMI: use C99 struct inits.
Convert IPMI driver struct usage to C99 initializers.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.170, 2005-01-08 14:25:08-08:00, janitor@sternwelten.at
[PATCH] ifdef typos mips: AU1[0X]00_USB_DEVICE
AU1000_USB_DEVICE appears 3 times.
AU1X00_USB_DEVICE appears 44 times, and is nowhere defined.
One ifdef starts with "X" version, and ends with "0", so it's quite
obvious these is supposed to be one option.
Makes you wonder if anybody uses these devices.
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.169, 2005-01-08 14:24:51-08:00, janitor@sternwelten.at
[PATCH] ifdef typos: drivers_usb_net_usbnet.c
Although neither symbol is not defined (yet?); code uses some
GENELINK_* (_ACK too), so this seems right.
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.168, 2005-01-08 14:24:33-08:00, janitor@sternwelten.at
[PATCH] ifdef typos: drivers_net_wireless_wavelan_cs.c
wavelan.p.h defines *_ERROR
wavelan_cs.p.h defines *_ERRORS
Since only second one is included, change #ifdefs
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.167, 2005-01-08 14:24:16-08:00, janitor@sternwelten.at
[PATCH] ifdef typos: drivers_char_ipmi_ipmi_si_intf.c
CONFIG_ACPI_INTERPETER is wrong.
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.166, 2005-01-08 14:23:58-08:00, janitor@sternwelten.at
[PATCH] ifdef typos: arch_sh_boards_renesas_hs7751rvoip_io.c
CONFIG_HS7751RVOIP_CIDEC is mistyped.
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.165, 2005-01-08 14:23:42-08:00, janitor@sternwelten.at
[PATCH] ifdef typos: arch_ppc_syslib_ppc4xx_dma.c
ppc4xx_dma.h defines PPC4xx_DMA_64BIT.
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.164, 2005-01-08 14:23:24-08:00, janitor@sternwelten.at
[PATCH] ifdef typos: arch_ppc_platforms_prep_setup.c -another one
Obvious typo, FB_VGA16 is from Kconfig.
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.163, 2005-01-08 14:23:04-08:00, janitor@sternwelten.at
[PATCH] ifdef typos: arch_ppc_platforms_prep_setup.c
CONFIG_PREP_PRESIDUAL is mistyped.
Signed-off-by: Domen Puncer <domen@coderock.org>
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.162, 2005-01-08 14:22:46-08:00, bunk@stusta.de
[PATCH] small drivers/media/radio/ cleanups
the patch below makes the following cleanups under drivers/media/radio/ :
- remove two unused global variables
- make some needlessly global code static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.161, 2005-01-08 14:22:28-08:00, bunk@stusta.de
[PATCH] small MCA cleanups
The patch below does the following cleanups in the MCA code:
- make some needlessly global code static
- remove three unused global functions from mca-legacy.c (two of them
were EXPORT_SYMBOL'ed); this should IMHO be safe since mca-legacy
is not an API drivers should move to
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.160, 2005-01-08 14:22:11-08:00, bunk@stusta.de
[PATCH] lockd: fix two struct definitions
Under fs/lockd/, there are two structs declared extern although they are in
the same file. Furtheremore, they don't have to be global since their only
users are in the same file.
Most of the changes to svc.c are only indent fixes caused by making the
struct static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.159, 2005-01-08 14:21:50-08:00, akpm@osdl.org
[PATCH] MODULE_PARM conversions
Rusty Russell <rusty@rustcorp.com.au>
MODULE_PARM conversions for x86 `allyesconfig'.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.158, 2005-01-08 14:21:13-08:00, akpm@osdl.org
[PATCH] MODULE_PARM conversions
Rusty Russell <rusty@rustcorp.com.au>
MODULE_PARM conversions for x86 `allmodconfig'.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.157, 2005-01-08 14:20:53-08:00, akpm@osdl.org
[PATCH] remove early_param test code
Remove some unused test code
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.156, 2005-01-08 14:20:35-08:00, bunk@stusta.de
[PATCH] fs/coda/psdev.c shouldn't include lp.h
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.155, 2005-01-08 14:20:20-08:00, bunk@stusta.de
[PATCH] cdrom.c: make several functions static (fwd)
The patch below makes several functions in cdrom.c static.
This includes cdrom_is_mrw and cdrom_is_random_writable which were
EXPORT_SYMBOL'ed but weren't used anywhere outside of cdrom.h .
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.154, 2005-01-08 14:20:02-08:00, bunk@stusta.de
[PATCH] reiser3 cleanups
The patch below contains some cleanups for reiser3.
It consists of:
- removal of unused code
- making needlessly global code static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.153, 2005-01-08 14:19:45-08:00, bunk@stusta.de
[PATCH] small ftape cleanups
The patch below does cleanups under drivers/char/rio/ including the
following:
- remove some completely unused code
- make some needlessly global code static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.152, 2005-01-08 14:19:26-08:00, kraxel@bytesex.org
[PATCH] drivers/media/video: the easy cleanups
This patch only makes code that is neither mentioned in a header file nor
declared extern in another file static.
Additionally, it does remove the unused function stradis_driver from stradis.c
(or what should the comment mean?).
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.151, 2005-01-08 14:19:09-08:00, kraxel@bytesex.org
[PATCH] zoran_device.c: make zr36057_init_vfe static
The patch below makes function zr36057_init_vfe in
drivers/media/video/zoran_device.c which has no external users static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.150, 2005-01-08 14:18:51-08:00, kraxel@bytesex.org
[PATCH] media/video/msp3400.c: remove unused struct d1
This struct is simply unused.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.149, 2005-01-08 14:18:35-08:00, kraxel@bytesex.org
[PATCH] zoran_driver.c: make zoran_num_formats static
zoran_num_formats was referenced from two other files as extern, but was used
in none of them.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.148, 2005-01-08 14:18:18-08:00, olsimar@wanadoo.fr
[PATCH] bttv help fix
I found one mistake in the help of bttv in 2.6.10-rc2-bk4 :
"I2C bit-banging interfaces" in the character device section.
or it's in the device drivers section since 2.6.X.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.147, 2005-01-08 14:18:01-08:00, kraxel@bytesex.org
[PATCH] bttv-risc.c: make some functions static
The patch below makes some functions in drivers/media/video/bttv-risc.c that
currently have no other in-kernel users static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.146, 2005-01-08 14:17:44-08:00, kraxel@bytesex.org
[PATCH] bttv-i2c.c: make two functions static
The patch below makes two functions in drivers/media/video/bttv-i2c.c without
external users static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.145, 2005-01-08 14:17:23-08:00, blaisorblade_spam@yahoo.it
[PATCH] ext3: use generic_open_file to fix possible preemption bugs
Ext3 is currently using a duplicate version of generic_open_file, and this
should be fixed, before it gets out of sync.
In fact, it *has* got out of sync.
Apart some cosmetic changes (which are not a problem), note that it
directly reads inode->i_size, while the generic version uses i_size_read().
I'm not sure if this bug can actually be triggered, but here follows a
possible scenario: when
- a file is brought into inode cache
- that file is either truncated or extended (i.e. inode->i_size is changed)
and after this it changes it's "more than 2Gb" property,
- and process B opens that file in the meanwhile,
I suppose the size check can be hurted by a race condition, doesn't it?
Similar checks should probably be done for other FS's. Also, ext2 does not
have this problem - someone fixed this problem in ext2 but not ext3? How?
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.144, 2005-01-08 14:17:06-08:00, linville@tuxdriver.com
[PATCH] oss: AC97 quirk facility
Add a quirk facility for AC97 in OSS, and add a quirk list for the
i810_audio driver.
This allows automatically "correct" behaviour for sound hardware w/ known
oddities. For example, many cards have the headphone and line-out outputs
swapped or headphone outputs only.
The code is stolen shamelessly from ALSA, FWIW...
Signed-off-by: John W. Linville <linville@tuxdriver.com>
From: William Lee Irwin III <wli@holomorphy.com>
include/linux/ac97_codec.h:337: warning: `struct pci_dev' declared inside parameter list
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.143, 2005-01-08 14:16:49-08:00, bunk@stusta.de
[PATCH] char/cyclades.c: remove unused code
The patch below removes unused code from drivers/char/cyclades.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.142, 2005-01-08 14:16:32-08:00, bunk@stusta.de
[PATCH] telephony/ixj.c cleanup
- remove ixj_register and ixj_unregister. these were EXPORT_SYMBOL'ed static
(sic) functions it seems the only reason why this "worked" was that there
were exactly zero users of them...
- remove four local variables that are after this removal no longer
required
- make five functions that were needlessly global static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.141, 2005-01-08 14:16:10-08:00, bunk@stusta.de
[PATCH] DEBUG_BUGVERBOSE for i386
The patch below implements CONFIG_DEBUG_BUGVERBOSE for i386 (more exactly, it
allows disabling the verbose BUG() reporting).
Also, require CONFIG_EMBEDDED for this option: we don't want to make it easy
for people to disable useful debug info.
(With lots of help from Roman Zippel <zippel@linux-m68k.org>)
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.140, 2005-01-08 14:15:53-08:00, bunk@stusta.de
[PATCH] small char/generic_serial.c cleanup
The patch below does the following changes to
drivers/char/generic_serial.c :
- make two needlessly global functions static
- remove the completely unused EXPORT_SYMBOL'ed function gs_do_softint
AFAIR the latter should be safe, since drivers are moving away from
generic_serial.c.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.139, 2005-01-08 14:15:36-08:00, bunk@stusta.de
[PATCH] small drivers/char/rio/ cleanups
The patch below does cleanups under drivers/char/rio/ including the
following:
- remove some completely unused code
- make some needlessly global code static
- remove #ifndef linux code
- remove never enabled #ifdef XPRINT_SUPPORT code
- RIOStrlen -> string.h strlen
- RIOStrCmp -> string.h strcmp
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.138, 2005-01-08 14:15:18-08:00, jdittmer@ppp0.net
[PATCH] btaudio module_param conversion
btaudio module_param conversion
Signed-off-by: Jan Dittmer <jdittmer@ppp0.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.137, 2005-01-08 14:15:01-08:00, jdittmer@ppp0.net
[PATCH] media/video module_param conversion
Convert module_param in tda7432 and tda9875. I hope I got the file
permissions right.
Signed-off-by: Jan Dittmer <jdittmer@ppp0.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.136, 2005-01-08 14:14:44-08:00, jdittmer@ppp0.net
[PATCH] sr module_param conversion
module_param conversion for SCSI cdrom driver
Signed-off-by: Jan Dittmer <jdittmer@ppp0.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.135, 2005-01-08 14:14:27-08:00, jdittmer@ppp0.net
[PATCH] isapnp module_param conversion
module_param conversion for isapnp
Signed-off-by: Jan Dittmer <jdittmer@ppp0.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.134, 2005-01-08 14:14:10-08:00, jdittmer@sfhq.hn.org
[PATCH] eth1394 MODULE_PARM conversion
Convert MODULE_PARM to module_param
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.133, 2005-01-08 14:13:53-08:00, anton@samba.org
[PATCH] update hugetlb documentation
The hugetlb documentation includes two example programs however they need
some attention. At the moment they are ia64 specific (they use MAP_FIXED
which will fail on other architectures), and they contain a number of
compiler warnings.
Also update the documentation to include the ppc64 page sizes.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.132, 2005-01-08 14:13:36-08:00, james4765@verizon.net
[PATCH] tipar: Code cleanup
Correct the following issues:
- Remove reference to 2.5 kernel code.
- Switch some ints to unsigned ints.
- Correct KERN_ constants in printk's, and move most to pr_debug &
pr_info Fix some >80 column lines and indenting.
Compile tested.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.131, 2005-01-08 14:13:20-08:00, james4765@verizon.net
[PATCH] tipar: Document driver options
Document kernel parameters for tipar driver.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.130, 2005-01-08 14:13:03-08:00, james4765@verizon.net
[PATCH] cyclades: Put README.cycladeZ in Documentation/serial
Put README.cycladesZ in Documentation/serial.
Firmware is still needed, but the README file shouldn't be in drivers/char.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.129, 2005-01-08 14:12:34-08:00, james4765@verizon.net
[PATCH] sh: Remove x86-specific help in Kconfig
Remove x86-specific bus refernces in arch/sh/drivers/pci/Kconfig.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.128, 2005-01-08 14:12:17-08:00, james4765@verizon.net
[PATCH] cpqarray: Correct mailing list address in source code
Correct mailing list address in cpqarray source code.
Signed-off-by: James Nelson <james4765@gmail.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.127, 2005-01-08 14:11:59-08:00, james4765@verizon.net
[PATCH] cciss: Correct mailing list address in source code
Correct mailing list address in cciss source code.
Signed-off-by: James Nelson <james4765@gmail.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.126, 2005-01-08 14:11:42-08:00, james4765@verizon.net
[PATCH] cciss: Documentation update
Updates to cciss documentation.
mkdev.cciss is no longer needed, since it is handled by the MAKEDEV program.
Signed-off-by: James Nelson <james4765@gmail.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.125, 2005-01-08 14:11:25-08:00, pavel@ucw.cz
[PATCH] docs: add sparse howto
Installing / using sparse is not exactly trivial, this should make setting it
up easier.
Adapted From: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.124, 2005-01-08 14:11:07-08:00, pavel@ucw.cz
[PATCH] pm: remove outdated docs
pm_access / pm_dev_idle was removed from recent kernels. This should
stop confusion.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.123, 2005-01-08 14:10:50-08:00, james4765@gmail.com
[PATCH] riscom8: Update staus and documentation of driver
I could not locate the original author or any active support effort being
done.
This is definitely an orphaned driver.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.122, 2005-01-08 14:10:33-08:00, james4765@gmail.com
[PATCH] stallion: Update to Documentation/stallion.txt
Some updating and removal of dead links in the text file.
The 5.5 package is not carried on the sunsite.unc.edu or tsx-11.mit.edu FTP
servers, and the support@stallion.com address bounces.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.121, 2005-01-08 14:10:17-08:00, james4765@gmail.com
[PATCH] specialix: remove bouncing e-mail address
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.120, 2005-01-08 14:10:00-08:00, james4765@gmail.com
[PATCH] moxa: Remove README.moxa from Documentation/00-INDEX
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.119, 2005-01-08 14:09:43-08:00, james4765@gmail.com
[PATCH] moxa: Remove ancient changelog README.moxa
The driver at Moxa's website is version 1.8. There is no need for this file.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.118, 2005-01-08 14:09:24-08:00, james4765@gmail.com
[PATCH] moxa: Update status of Moxa Smartio driver
After contacting Moxa, I found out that they no longer maintain the
in-kernel driver, and instead maintain an updated driver as an external
patch.
This patch updates the documentation to reflect this.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.117, 2005-01-08 14:09:06-08:00, tglx@linutronix.de
[PATCH] Lock initializer cleanup (Core)
Kernel core files converted to use the new lock initializers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.116, 2005-01-08 14:08:46-08:00, tglx@linutronix.de
[PATCH] Lock initializer cleanup (character devices)
Character devices converted to use the new lock initializers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.115, 2005-01-08 14:08:28-08:00, tglx@linutronix.de
[PATCH] Lock initializer cleanup (common headers)
First part of the patch series. Define initializer macros
Often used structures in the kernel are almost all declared and
initialized by macros in the form:
DEFINE_TYPE(name)
Spinlocks and rwlocks are declared and initialized by:
type name = INITIALIZER;
After converting the runtime initialization of spinlocks/rwlocks to
macro form it is consequent to change the declaration and initializion
of global and static locks to the macro form too. This conversion
identifies those variables as "special", common code controlled
entities similar to list_heads, mutexes... Besides consistency and code
clearness this also helps automatic lock validators and debugging code.
The patch converts
-rwlock_t snd_card_rwlock = RW_LOCK_UNLOCKED;
+DEFINE_RWLOCK(snd_card_rwlock);
and
-static spinlock_t slave_active_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(slave_active_lock);
There is no runtime overhead or actual code change resulting out of this
patch, other than a small reduction in the kernel source code size.
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.114, 2005-01-08 14:08:11-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: sound
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.113, 2005-01-08 14:07:54-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: Video
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.112, 2005-01-08 14:07:37-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: Filesystems
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.111, 2005-01-08 14:07:19-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: drivers/serial
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
This patch removes also a double init in icom.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.110, 2005-01-08 14:07:02-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: media drivers
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.109, 2005-01-08 14:06:45-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: Raid
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.108, 2005-01-08 14:06:27-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: ISDN
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.107, 2005-01-08 14:06:10-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: Firewire
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.106, 2005-01-08 14:05:57-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: RIO
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.105, 2005-01-08 14:05:40-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: character devices
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.104, 2005-01-08 14:05:19-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: DRM
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.103, 2005-01-08 14:05:02-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: Block devices
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.102, 2005-01-08 14:04:45-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: Misc drivers
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.101, 2005-01-08 14:04:28-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: MIPS
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.100, 2005-01-08 14:04:11-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: M32R
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.99, 2005-01-08 14:03:54-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: IA64
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.98, 2005-01-08 14:03:35-08:00, tglx@linutronix.de
[PATCH] Lock initializer unifying: ALPHA
To make spinlock/rwlock initialization consistent all over the kernel,
this patch converts explicit lock-initializers into spin_lock_init() and
rwlock_init() calls.
Currently, spinlocks and rwlocks are initialized in two different ways:
lock = SPIN_LOCK_UNLOCKED
spin_lock_init(&lock)
rwlock = RW_LOCK_UNLOCKED
rwlock_init(&rwlock)
this patch converts all explicit lock initializations to
spin_lock_init() or rwlock_init(). (Besides consistency this also helps
automatic lock validators and debugging code.)
The conversion was done with a script, it was verified manually and it
was reviewed, compiled and tested as far as possible on x86, ARM, PPC.
There is no runtime overhead or actual code change resulting out of this
patch, because spin_lock_init() and rwlock_init() are macros and are
thus equivalent to the explicit initialization method.
That's the second batch of the unifying patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.97, 2005-01-08 14:03:18-08:00, akpm@osdl.org
[PATCH] invalidate_inode_pages2() mmap coherency fix
- When invalidating pages, take care to shoot down any ptes which map them
as well.
This ensures that the next mmap access to the page will generate a major
fault, so NFS's server-side modifications are picked up.
This also allows us to call invalidate_complete_page() on all pages, so
filesytems such as ext3 get a chance to invalidate the buffer_heads.
- Don't mark in-pagetable pages as non-uptodate any more. That broke a
previous guarantee that mapped-into-user-process pages are always uptodate.
- Check the return value of invalidate_complete_page(). It can fail if
someone redirties a page after generic_file_direct_IO() write it back.
But we still have a problem. If invalidate_inode_pages2() calls
unmap_mapping_range(), that can cause zap_pte_range() to dirty the pagecache
pages. That will redirty the page's buffers and will cause
invalidate_complete_page() to fail.
So, in generic_file_direct_IO() we do a complete pte shootdown on the file
up-front, prior to writing back dirty pagecache. This is only done for
O_DIRECT writes. It _could_ be done for O_DIRECT reads too, providing full
mmap-vs-direct-IO coherency for both O_DIRECT reads and O_DIRECT writes, but
permitting the pte shootdown on O_DIRECT reads trivially allows people to nuke
other people's mapped pagecache.
NFS also uses invalidate_inode_pages2() for handling server-side modification
notifications. But in the NFS case the clear_page_dirty() in
invalidate_inode_pages2() is sufficient, because NFS doesn't have to worry
about the "dirty buffers against a clean page" problem. (I think)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.96, 2005-01-08 14:03:01-08:00, akpm@osdl.org
[PATCH] readpage-vs-invalidate fix
A while ago we merged a patch which tried to solve a problem wherein a
concurrent read() and invalidate_inode_pages() would cause the read() to
return -EIO because invalidate cleared PageUptodate() at the wrong time.
That patch tests for (page_count(page) != 2) in invalidate_complete_page() and
bales out if false.
Problem is, the page may be in the per-cpu LRU front-ends over in
lru_cache_add. This elevates the refcount pending spillage of the page onto
the LRU for real. That causes a false positive in invalidate_complete_page(),
causing the page to not get invalidated. This screws up the logic in my new
O_DIRECT-vs-buffered coherency fix.
So let's solve the invalidate-vs-read in a different manner. Over on the
read() side, add an explicit check to see if the page was invalidated. If so,
just drop it on the floor and redo the read from scratch.
Note that only do_generic_mapping_read() needs treatment. filemap_nopage(),
filemap_getpage() and read_cache_page() are already doing the
oh-it-was-invalidated-so-try-again thing.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.95, 2005-01-08 14:02:44-08:00, rusty@rustcorp.com.au
[PATCH] Remove EXPORT_SYMBOL_NOVERS
Vadim Lobanov points out that EXPORT_SYMBOL_NOVERS is no longer used; in
fact, SH still uses it, but once we fix that, the kernel is clean. Remove
it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.94, 2005-01-08 14:02:27-08:00, hpa@zytor.com
[PATCH] raid6: altivec support
This patch adds Altivec support for RAID-6, if appropriately configured on
the ppc or ppc64 architectures. Note that it changes the compile flags for
ppc64 in order to handle -maltivec correctly; this change was vetted on the
ppc64 mailing list and OK'd by paulus.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.93, 2005-01-08 14:02:09-08:00, david-b@pacbell.net
[PATCH] fbdev: rivafb should recognize NF2/IGP
I got tired of not seeing the boot time penguin on my Shuttle SN41G2, and
not having a decently large text display when I bypass X11. XFree86 says
it's "Chipset GeForce4 MX Integrated GPU", and the kernel driver has hooks
for this chip ID although it doesn't have a #define to match.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.92, 2005-01-08 14:01:54-08:00, kamezawa.hiroyu@jp.fujitsu.com
[PATCH] no buddy bitmap patch revist: for ia64
This patch is for ia64 kernel, and defines CONFIG_HOLES_IN_ZONE in
arch/ia64/Kconfig. IA64 has memory holes smaller than its MAX_ORDER and
its virtual memmap allows holes in a zone's memmap.
This patch makes vmemmap aligned with IA64_GRANULE_SIZE in
arch/ia64/mm/init.c.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.91, 2005-01-08 14:01:35-08:00, kamezawa.hiroyu@jp.fujitsu.com
[PATCH] no buddy bitmap patch revisit: for mm/page_alloc.c
This patch removes bitmaps from page allocator in mm/page_alloc.c.
This buddy system uses page->private field to record free page's order
instead of using bitmaps.
The algorithm of the buddy system is unchanged. Only bitmaps are removed.
In this buddy system, 2 pages,a page and "buddy", can be coalesced when
(buddy->private & PG_private) &&
(page_order(page)) == (page_order(buddy)) &&
!PageReserved(buddy) &&
page_count(buddy) == 0
this also means "buddy" is a head of continuous free pages
of length of (1 << page_order(buddy)).
bad_range() is called from inner loop of __free_pages_bulk().
In many archs, bad_range() is only a sanity check, it will always return 0.
But if a zone's memmap has a hole, it sometimes returns 1.
An architecture with memory holes in a zone has to define CONFIG_HOLES_IN_ZONE.
When CONFIG_HOLES_IN_ZONE is defined, pfn_valid() is called for checking
whether a buddy pages is valid or not.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.90, 2005-01-08 14:01:18-08:00, kamezawa.hiroyu@jp.fujitsu.com
[PATCH] no buddy bitmap patch revist: intro and includes
Followings are patches for removing bitmaps from the buddy allocator. This
is benefical to memory-hot-plug stuffs, because this removes a data
structure which must meet to a host's physical memory layout.
This is one step to manage physical memory in nonlinear / discontiguous way
and will reduce some amounts of codes to implement memory-hot-plug.
This patch removes bitmaps from zone->free_area[] in include/linux/mmzone.h,
and adds some comments on page->private field in include/linux/mm.h.
non-atomic ops for changing PG_private bit is added in include/page-flags.h.
zone->lock is always acquired when PG_private of "a free page" is changed.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.89, 2005-01-08 14:01:01-08:00, wli@holomorphy.com
[PATCH] vm: for -mm only: remove remap_page_range() completely
All in-tree references to remap_page_range() have been removed by prior
patches in the series. This patch, intended to be applied after some waiting
period for people to adjust to the API change, notice __deprecated, etc., does
the final removal of remap_page_range() as a function symbol declared within
kernel headers and/or implemented in kernel sources.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.88, 2005-01-08 14:00:48-08:00, neilb@cse.unsw.edu.au
[PATCH] md: improve 'hash' code in linear.c
The hashtable that linear uses to find the right device stores
two pointers for every entry.
The second is always one of:
The first plus 1
NULL
When NULL, it is never accessed, so any value can be stored.
Thus it could always be "first plus 1", and so we don't need to store
it as it is trivial to calculate.
This patch halves the size of this table, which results in some simpler
code as well.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.87, 2005-01-08 14:00:31-08:00, nathanl@austin.ibm.com
[PATCH] cpu_down() warning fix
Fix (harmless?) smp_processor_id() usage in preemptible section of
cpu_down.
Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.86, 2005-01-08 14:00:14-08:00, mingo@elte.hu
[PATCH] oprofile preempt warning fixes
From: Peter Zijlstra <peter@programming.kicks-ass.net>
I have to use oprofile a lot but do want to enable preemption checks.
This gives some noise; I think andrew allready mentioned fixin this.
The following patch fixes about half of the warnings.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.85, 2005-01-08 13:59:57-08:00, mingo@elte.hu
[PATCH] remove the BKL by turning it into a semaphore
This is the current remove-BKL patch. I test-booted it on x86 and x64, trying
every conceivable combination of SMP, PREEMPT and PREEMPT_BKL. All other
architectures should compile as well. (most of the testing was done with the
zaphod patch undone but it applies cleanly on vanilla -mm3 as well and should
work fine.)
this is the debugging-enabled variant of the patch which has two main
debugging features:
- debug potentially illegal smp_processor_id() use. Has caught a number
of real bugs - e.g. look at the printk.c fix in the patch.
- make it possible to enable/disable the BKL via a .config. If this
goes upstream we dont want this of course, but for now it gives
people a chance to find out whether any particular problem was caused
by this patch.
This patch has one important fix over the previous BKL patch: on PREEMPT
kernels if we preempted BKL-using code then the code still auto-dropped the
BKL by mistake. This caused a number of breakages for testers, which
breakages went away once this bug was fixed.
Also the debugging mechanism has been improved alot relative to the previous
BKL patch.
Would be nice to test-drive this in -mm. There will likely be some more
smp_processor_id() false positives but they are 1) harmless 2) easy to fix up.
We could as well find more real smp_processor_id() related breakages as well.
The most noteworthy fact is that no BKL-using code was found yet that relied
on smp_processor_id(), which is promising from a compatibility POV.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.84, 2005-01-08 13:59:38-08:00, hugh@veritas.com
[PATCH] vmtrunc: restart_addr in truncate_count
Despite its restart_pgoff pretentions, unmap_mapping_range_vma was fatally
unable to distinguish a vma to be restarted from the case where that vma
has been freed, and its vm_area_struct reused for the top part of a
!new_below split of an isomorphic vma yet to be scanned.
The obvious answer is to note restart_vma in the struct address_space, and
cancel it when that vma is freed; but I'm reluctant to enlarge every struct
inode just for this. Another answer is to flag valid restart in the
vm_area_struct; but vm_flags is protected by down_write of mmap_sem, which
we cannot take within down_write of i_sem. If we're going to need yet
another field, better to record the restart_addr itself: restart_vma only
recorded the last restart, but a busy tree could well use more.
Actually, we don't need another field: we can neatly (though naughtily)
keep restart_addr in vm_truncate_count, provided mapping->truncate_count
leaps over those values which look like a page-aligned address. Zero
remains good for forcing a scan (though now interpreted as restart_addr 0),
and it turns out no change is needed to any of the vm_truncate_count
settings in dup_mmap, vma_link, vma_adjust, move_one_page.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.83, 2005-01-08 13:59:23-08:00, hugh@veritas.com
[PATCH] vmtrunc: bug if page_mapped
If unmap_mapping_range (and mapping->truncate_count) are doing their jobs
right, truncate_complete_page should never find the page mapped: add BUG_ON
for our immediate testing, but this patch should probably not go to mainline -
a mapped page here is not a catastrophe.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.82, 2005-01-08 13:59:06-08:00, hugh@veritas.com
[PATCH] vmtrunc: vm_truncate_count race caution
Fix some unlikely races in respect of vm_truncate_count.
Firstly, it's supposed to be guarded by i_mmap_lock, but some places copy a
vma structure by *new_vma = *old_vma: if the compiler implements that with a
bytewise copy, new_vma->vm_truncate_count could be munged, and new_vma later
appear up-to-date when it's not; so set it properly once under lock.
vma_link set vm_truncate_count to mapping->truncate_count when adding an empty
vma: if new vmas are being added profusely while vmtruncate is in progess,
this lets them be skipped without scanning.
vma_adjust has vm_truncate_count problem much like it had with anon_vma under
mprotect merge: when merging be careful not to leave vma marked as up-to-date
when it might not be, lest unmap_mapping_range in progress - set
vm_truncate_count 0 when in doubt. Similarly when mremap moving ptes from one
vma to another.
Cut a little code from __anon_vma_merge: now vma_adjust sets "importer" in the
remove_next case (to get its vm_truncate_count right), its anon_vma is already
linked by the time __anon_vma_merge is called.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.81, 2005-01-08 13:58:53-08:00, hugh@veritas.com
[PATCH] vmtrunc: unmap_mapping dropping i_mmap_lock
vmtruncate (or more generally, unmap_mapping_range) has been observed
responsible for very high latencies: the lockbreak work in unmap_vmas is good
for munmap or exit_mmap, but no use while mapping->i_mmap_lock is held, to
keep our place in the prio_tree (or list) of a file's vmas.
Extend the zap_details block with i_mmap_lock pointer, so unmap_vmas can
detect if that needs lockbreak, and break_addr so it can notify where it left
off.
Add unmap_mapping_range_vma, used from both prio_tree and nonlinear list
handlers. This is what now calls zap_page_range (above unmap_vmas), but
handles the lockbreak and restart issues: letting unmap_mapping_range_ tree or
list know when they need to start over because lock was dropped.
When restarting, of course there's a danger of never making progress. Add
vm_truncate_count field to vm_area_struct, update that to mapping->
truncate_count once fully scanned, skip up-to-date vmas without a scan (and
without dropping i_mmap_lock).
Further danger of never making progress if a vma is very large: when breaking
out, save restart_vma and restart_addr (and restart_pgoff to confirm, in case
vma gets reused), to help continue where we left off.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.80, 2005-01-08 13:58:36-08:00, hugh@veritas.com
[PATCH] vmtrunc: unmap_mapping_range_tree
Move unmap_mapping_range's nonlinear vma handling out to its own inline,
parallel to the prio_tree handling; unmap_mapping_range_list is a better name
for the nonlinear list, rename the other unmap_mapping_range_tree.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.79, 2005-01-08 13:58:19-08:00, hugh@veritas.com
[PATCH] vmtrunc: restore unmap_vmas zap_bytes
The low-latency unmap_vmas patch silently moved the zap_bytes test after the
TLB finish and lockbreak and regather: why? That not only makes zap_bytes
redundant (might as well use ZAP_BLOCK_SIZE), it makes the unmap_vmas level
redundant too - it's all about saving TLB flushes when unmapping a series of
small vmas.
Move zap_bytes test back before the lockbreak, and delete the curious comment
that a small zap block size doesn't matter: it's true need_flush prevents TLB
flush when no page has been unmapped, but unmapping pages in small blocks
involves many more TLB flushes than in large blocks.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.78, 2005-01-08 13:58:02-08:00, hugh@veritas.com
[PATCH] vmtrunc: truncate_count not atomic
Why is mapping->truncate_count atomic? It's incremented inside i_mmap_lock
(and i_sem), and the reads don't need it to be atomic.
And why smp_rmb() before call to ->nopage? The compiler cannot reorder the
initial assignment of sequence after the call to ->nopage, and no cpu (yet!)
can read from the future, which is all that matters there.
And delete totally bogus reset of truncate_count from blkmtd add_device.
truncate_count is all about detecting i_size changes: i_size does not change
there; and if it did, the count should be incremented not reset.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.77, 2005-01-08 13:57:45-08:00, akpm@osdl.org
[PATCH] block2mtd: avoid touching truncate_count
blockmtd doesn't need to initialise address_space.truncate_count:
open_bdev_excl did that.
Plus I have a patch queued up which removes ->truncate_count.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.76, 2005-01-08 13:57:28-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - arch-independent
From: William Lee Irwin III <wli@holomorphy.com>
Without passing this parameter by reference, the changes to used_node_mask
are meaningless and do not affect the caller's copy.
This leads to boot-time failure. This proposed fix passes it by reference.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.75, 2005-01-08 13:57:12-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - x86_64
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.74, 2005-01-08 13:56:50-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - ppc64
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.73, 2005-01-08 13:56:34-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - parisc
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.72, 2005-01-08 13:56:15-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - mips
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.71, 2005-01-08 13:55:59-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - m32r
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.70, 2005-01-08 13:55:38-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - ia64
From: Jesse Barnes <jbarnes@engr.sgi.com>
Here are some compile fixes for this patch. Looks like simple typos.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.69, 2005-01-08 13:55:22-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - i386
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.68, 2005-01-08 13:55:05-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - arm
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.67, 2005-01-08 13:54:48-08:00, colpatch@us.ibm.com
[PATCH] Replace 'numnodes' with 'node_online_map' - alpha
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.66, 2005-01-08 13:54:31-08:00, nickpiggin@yahoo.com.au
[PATCH] debug sched domains before attach
Change the sched-domain debug routine to be called on a per-CPU basis, and
executed before the domain is actually attached to the CPU. Previously, all
CPUs would have their new domains attached, and then the debug routine would
loop over all of them.
This has two advantages: First, there is no longer any theoretical races: we
are running the debug routine on a domain that isn't yet active, and should
have no racing access from another CPU. Second, if there is a problem with a
domain, the validator will have a better chance to catch the error and print a
diagnostic _before_ the domain is attached, which may take down the system.
Also, change reporting of detected error conditions to KERN_ERR instead of
KERN_DEBUG, so they have a better chance of being seen in a hang on boot
situation.
The patch also does an unrelated (and harmless) cleanup in migration_thread().
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.65, 2005-01-08 13:54:15-08:00, mingo@elte.hu
[PATCH] Fix smp_processor_id() warning in numa_node_id()
The patch below fixes smp_processor_id() warnings that are triggered by
numa_node_id().
All uses of numa_node_id() in mm/mempolicy.c seem to use it as a 'hint'
only, not as a correctness number. Once a node is established, it's used
in a preemption-safe way. So the simple fix is to disable the checking for
numa_node_id(). But additional review would be more than welcome, because
this patch turns off the preemption-checking of numa_node_id() permanently.
Tested on amd64.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.64, 2005-01-08 13:53:57-08:00, mingo@elte.hu
[PATCH] oprofile smp_processor_id() fixes
Clean up a few suspicious-looking uses of smp_processor_id() in preemptible
code.
The current_cpu_data use is unclean but most likely safe. I haven't seen any
outright bugs. Since oprofile does not seem to be ready for different-type
CPUs (do we even care?), the patch below documents this property by using
boot_cpu_data.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.63, 2005-01-08 13:53:41-08:00, mingo@elte.hu
[PATCH] idle thread preemption fix
The early bootup stage is pretty fragile because the idle thread is not yet
functioning as such and so we need preemption disabled. Whether the bootup
fails or not seems to depend on timing details so e.g. the presence of
SCHED_SMT makes it go away.
Disabling preemption explicitly has another advantage: the atomicity check
in schedule() will catch early-bootup schedule() calls from now on.
The patch also fixes another preempt-bkl buglet: interrupt-driven
forced-preemption didnt go through preempt_schedule() so it resulted in
auto-dropping of the BKL. Now we go through preempt_schedule() which
properly deals with the BKL.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.62, 2005-01-08 13:53:24-08:00, mingo@elte.hu
[PATCH] sched: fix scheduling latencies for !PREEMPT kernels
This patch adds a handful of cond_resched() points to a number of key,
scheduling-latency related non-inlined functions.
This reduces preemption latency for !PREEMPT kernels. These are scheduling
points complementary to PREEMPT_VOLUNTARY scheduling points (might_sleep()
places) - i.e. these are all points where an explicit cond_resched() had
to be added.
Has been tested as part of the -VP patchset.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.61, 2005-01-08 13:53:06-08:00, mingo@elte.hu
[PATCH] sched: fix scheduling latencies in vgacon.c
This patch fixes scheduling latencies in vgacon_do_font_op(). The code is
protected by vga_lock already so it's safe to drop (and re-acquire) the
BKL.
Has been tested in the -VP patchset.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.60, 2005-01-08 13:52:50-08:00, mingo@elte.hu
[PATCH] sched: fix scheduling latencies in mttr.c
Fix scheduling latencies in the MTRR-setting codepath. Also, fix bad bug:
MTRR's _must_ be set with interrupts disabled!
From: Bernard Blackham <bernard@blackham.com.au>
The patch sched-fix-scheduling-latencies-in-mttr in recent -mm kernels has
the bad side-effect of re-enabling interrupts even if they were disabled.
This caused bugs in Software Suspend 2 which reenabled MTRRs whilst
interrupts were already disabled.
Attached is a replacement patch which uses spin_lock_irqsave instead of
spin_lock_irq.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.59, 2005-01-08 13:52:32-08:00, mingo@elte.hu
[PATCH] fix keventd execution dependency
We dont want to execute off keventd since it might hold a semaphore our
callers hold too. This can happen when kthread_create() is called from
within keventd. This happened due to the IRQ threading patches but it
could happen with other code too.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.58, 2005-01-08 13:52:14-08:00, mingo@elte.hu
[PATCH] sched: mm: fix scheduling latencies in filemap_sync()
The attached patch, written by Andrew Morton, fixes long scheduling
latencies in filemap_sync().
Has been tested as part of the -VP patchset.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.57, 2005-01-08 13:51:58-08:00, mingo@elte.hu
[PATCH] sched: mm: fix scheduling latencies in get_user_pages()
The attached patch fixes long scheduling latencies in get_user_pages().
Has been tested as part of the -VP patchset.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.56, 2005-01-08 13:51:41-08:00, mingo@elte.hu
[PATCH] sched: mm: fix scheduling latencies in unmap_vmas()
The attached patch fixes long latencies in unmap_vmas(). We had lockbreak
code in that function already but it did not take delayed effects of
TLB-gather into account.
Has been tested as part of the -VP patchset.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.55, 2005-01-08 13:51:22-08:00, mingo@elte.hu
[PATCH] sched: net: fix scheduling latencies in __release_sock
The attached patch fixes long scheduling latencies caused by backlog
triggered by __release_sock(). That code only executes in process context,
and we've made the backlog queue private already at this point so it is
safe to do a cond_resched_softirq().
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.54, 2005-01-08 13:51:03-08:00, mingo@elte.hu
[PATCH] sched: net: fix scheduling latencies in netstat
The attached patch fixes long scheduling latencies caused by access to the
/proc/net/tcp file. The seqfile functions keep softirqs disabled for a
very long time (i've seen reports of 20+ msecs, if there are enough sockets
in the system). With the attached patch it's below 100 usecs.
The cond_resched_softirq() relies on the implicit knowledge that this code
executes in process context and runs with softirqs disabled.
Potentially enabling softirqs means that the socket list might change
between buckets - but this is not an issue since seqfiles have a 4K
iteration granularity anyway and /proc/net/tcp is often (much) larger than
that.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.53, 2005-01-08 13:50:46-08:00, mingo@elte.hu
[PATCH] sched: vfs: fix scheduling latencies in prune_dcache() and select_parent()
The attached patch fixes long scheduling latencies in select_parent() and
prune_dcache(). The prune_dcache() lock-break is easy, but for
select_parent() the only viable solution i found was to break out if
there's a resched necessary - the reordering is not necessary and the
dcache scanning/shrinking will later on do it anyway.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.52, 2005-01-08 13:50:26-08:00, mingo@elte.hu
[PATCH] break latency in invalidate_list()
break latency in invalidate_list().
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.51, 2005-01-08 13:50:09-08:00, mingo@elte.hu
[PATCH] sched: ext3: fix scheduling latencies in ext3
The attached patch fixes long scheduling latencies in the ext3 code, and it
also cleans up the existing lock-break functionality to use the new
primitives.
This patch has been in the -VP patchset for quite some time.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.50, 2005-01-08 13:49:52-08:00, mingo@elte.hu
[PATCH] sched: add cond_resched_softirq()
It adds cond_resched_softirq() which can be used by _process context_
softirqs-disabled codepaths to preempt if necessary. The function will
enable softirqs before scheduling. (Later patches will use this
primitive.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.49, 2005-01-08 13:49:36-08:00, mingo@elte.hu
[PATCH] add lock_need_resched()
Add lock_need_resched() which is to check for the necessity of lock-break
in a critical section. Used by later latency-break patches.
tested on x86, should work on all architectures.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.48, 2005-01-08 13:49:19-08:00, mingo@elte.hu
[PATCH] preempt cleanup
This is another generic fallout from the voluntary-preempt patchset: a
cleanup of the cond_resched() infrastructure, in preparation of the latency
reduction patches. The changes:
- uninline cond_resched() - this makes the footprint smaller,
especially once the number of cond_resched() points increase.
- add a 'was rescheduled' return value to cond_resched. This makes it
symmetric to cond_resched_lock() and later latency reduction patches
rely on the ability to tell whether there was any preemption.
- make cond_resched() more robust by using the same mechanism as
preempt_kernel(): by using PREEMPT_ACTIVE. This preserves the task's
state - e.g. if the task is in TASK_ZOMBIE but gets preempted via
cond_resched() just prior scheduling off then this approach preserves
TASK_ZOMBIE.
- the patch also adds need_lockbreak() which critical sections can use
to detect lock-break requests.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.47, 2005-01-08 13:49:02-08:00, mingo@elte.hu
[PATCH] improve preemption on SMP
SMP locking latencies are one of the last architectural problems that cause
millisec-category scheduling delays. CONFIG_PREEMPT tries to solve some of
the SMP issues but there are still lots of problems remaining: spinlocks
nested at multiple levels, spinning with irqs turned off, and non-nested
spinning with preemption turned off permanently.
The nesting problem goes like this: if a piece of kernel code (e.g. the MM
or ext3's journalling code) does the following:
spin_lock(&spinlock_1);
...
spin_lock(&spinlock_2);
...
then even with CONFIG_PREEMPT enabled, current kernels may spin on
spinlock_2 indefinitely. A number of critical sections break their long
paths by using cond_resched_lock(), but this does not break the path on
SMP, because need_resched() *of the other CPU* is not set so
cond_resched_lock() doesnt notice that a reschedule is due.
to solve this problem i've introduced a new spinlock field,
lock->break_lock, which signals towards the holding CPU that a
spinlock-break is requested by another CPU. This field is only set if a
CPU is spinning in a spinlock function [at any locking depth], so the
default overhead is zero. I've extended cond_resched_lock() to check for
this flag - in this case we can also save a reschedule. I've added the
lock_need_resched(lock) and need_lockbreak(lock) methods to check for the
need to break out of a critical section.
Another latency problem was that the stock kernel, even with CONFIG_PREEMPT
enabled, didnt have any spin-nicely preemption logic for the following,
commonly used SMP locking primitives: read_lock(), spin_lock_irqsave(),
spin_lock_irq(), spin_lock_bh(), read_lock_irqsave(), read_lock_irq(),
read_lock_bh(), write_lock_irqsave(), write_lock_irq(), write_lock_bh().
Only spin_lock() and write_lock() [the two simplest cases] where covered.
In addition to the preemption latency problems, the _irq() variants in the
above list didnt do any IRQ-enabling while spinning - possibly resulting in
excessive irqs-off sections of code!
preempt-smp.patch fixes all these latency problems by spinning irq-nicely
(if possible) and by requesting lock-breaks if needed. Two
architecture-level changes were necessary for this: the addition of the
break_lock field to spinlock_t and rwlock_t, and the addition of the
_raw_read_trylock() function.
Testing done by Mark H Johnson and myself indicate SMP latencies comparable
to the UP kernel - while they were basically indefinitely high without this
patch.
i successfully test-compiled and test-booted this patch ontop of BK-curr
using the following .config combinations: SMP && PREEMPT, !SMP && PREEMPT,
SMP && !PREEMPT and !SMP && !PREEMPT on x86, !SMP && !PREEMPT and SMP &&
PREEMPT on x64. I also test-booted x86 with the generic_read_trylock
function to check that it works fine. Essentially the same patch has been
in testing as part of the voluntary-preempt patches for some time already.
NOTE to architecture maintainers: generic_raw_read_trylock() is a crude
version that should be replaced with the proper arch-optimized version
ASAP.
From: Hugh Dickins <hugh@veritas.com>
The i386 and x86_64 _raw_read_trylocks in preempt-smp.patch are too
successful: atomic_read() returns a signed integer.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.46, 2005-01-08 13:48:44-08:00, nathanl@austin.ibm.com
[PATCH] ppc64: call idle_task_exit from cpu_die
Call idle_task_exit from cpu_die to avoid mm_struct leak.
Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.45, 2005-01-08 13:48:27-08:00, nathanl@austin.ibm.com
[PATCH] introduce idle_task_exit
Heiko Carstens figured out that offlining a cpu can leak mm_structs because
the dying cpu's idle task fails to switch to init_mm and mmdrop its
active_mm before the cpu is down. This patch introduces idle_task_exit,
which allows the idle task to do this as Ingo suggested.
I will follow this up with a patch for ppc64 which calls idle_task_exit
from cpu_die.
Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.44, 2005-01-08 13:48:10-08:00, josha@sgi.com
[PATCH] sched: remove outdated/misleading comments
This patch removes two outdated/misleading comments from the CPU scheduler.
1) The first comment removed is simply incorrect. The function it
comments on is not used for what the comments says it is anymore.
2) The second comment is a leftover from when the "if" block it comments
on contained a goto. It does not any more, and the comment doesn't make
sense.
There isn't really a reason to add different comments, though someone might
feel differently in the case of the second one. I'll leave adding a
comment to anybody who wants to - more important to just get rid of them
now.
Signed-off-by: Josh Aas <josha@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.43, 2005-01-08 13:47:53-08:00, dcn@sgi.com
[PATCH] export sched_setscheduler() for kernel module use
This patch exports sched_setscheduler() so that it can be used by a kernel
module to set a kthread's scheduling policy and associated parameters.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.42, 2005-01-08 13:47:36-08:00, rml@novell.com
[PATCH] sched: no need to recalculate rq
no need to call task_rq in setscheduler; just use rq
Signed-Off-By: Robert Love <rml@novell.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.41, 2005-01-08 13:47:19-08:00, oleg@tv-sign.ru
[PATCH] don't hide thread_group_leader() from grep
Replace open-coded thread_group_leader() calls.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.40, 2005-01-08 13:47:03-08:00, oleg@tv-sign.ru
[PATCH] sched: use cached current value
schedule() can use prev instead of get_current().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.39, 2005-01-08 13:46:46-08:00, kernel@kolivas.org
[PATCH] sched: remove_interactive_credit
Special casing tasks by interactive credit was helpful for preventing fully
cpu bound tasks from easily rising to interactive status.
However it did not select out tasks that had periods of being fully cpu
bound and then sleeping while waiting on pipes, signals etc. This led to a
more disproportionate share of cpu time.
Backing this out will no longer special case only fully cpu bound tasks,
and prevents the variable behaviour that occurs at startup before tasks
declare themseleves interactive or not, and speeds up application startup
slightly under certain circumstances. It does cost in interactivity
slightly as load rises but it is worth it for the fairness gains.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.38, 2005-01-08 13:46:30-08:00, kernel@kolivas.org
[PATCH] sched: requeue_granularity
Change the granularity code to requeue tasks at their best priority instead
of changing priority while they're running. This keeps tasks at their top
interactive level during their whole timeslice.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.37, 2005-01-08 13:46:13-08:00, kernel@kolivas.org
[PATCH] sched: add_requeue_task
We can requeue tasks for cheaper then doing a complete dequeue followed by
an enqueue. Add the requeue_task function and perform it where possible.
This will be hit frequently by upcoming changes to the requeueing in
timeslice granularity.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.36, 2005-01-08 13:45:57-08:00, kernel@kolivas.org
[PATCH] sched: adjust_timeslice_granularity
The minimum timeslice was decreased from 10ms to 5ms. In the process, the
timeslice granularity was leading to much more rapid round robinning of
interactive tasks at cache trashing levels.
Restore minimum granularity to 10ms.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.35, 2005-01-08 13:45:40-08:00, kernel@kolivas.org
[PATCH] sched: alter_kthread_prio
Timeslice proportion has been increased substantially for -niced tasks. As
a result of this kernel threads have much larger timeslices than they
previously had.
Change kernel threads' nice value to -5 to bring their timeslice back in
line with previous behaviour. This means kernel threads will be less
likely to cause large latencies under periods of system stress for normal
nice 0 tasks.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.34, 2005-01-08 13:45:24-08:00, kernel@kolivas.org
[PATCH] sched.c whitespace mangler
Convert whitespace in sched.c to tabs
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.33, 2005-01-08 13:45:08-08:00, anton@samba.org
[PATCH] sched: reset cache_hot_time
Reset cache_hot_time to sane values (in the ms range). Some recent changes
resulted in values in the us range.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.32, 2005-01-08 13:44:51-08:00, colpatch@us.ibm.com
[PATCH] sched: active_load_balance() fixlet
There is a small problem with the active_load_balance() patch that Darren
sent out last week. As soon as we discover a potential 'target_cpu' from
'cpu_group' to try to push tasks to, we cease considering other CPUs in
that group as potential 'target_cpu's. We break out of the
for_each_cpu_mask() loop and try to push tasks to that CPU. The problem is
that there may well be other idle cpus in that group that we should also
try to push tasks to. Here is a patch to fix that small problem. The
solution is to simply move the code that tries to push the tasks into the
for_each_cpu_mask() loop and do away with the whole 'target_cpu' thing
entirely. Compiled & booted on a 16-way x440.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.31, 2005-01-08 13:44:34-08:00, habanero@us.ibm.com
[PATCH] sched: newidle fix
Allow idle_balance to search an incresingly larger span of cpus to find a
cpu. Minor change, NODE_SD_INIT gets SD_BALANCE_NEWIDLE flag. This is
critical for x86_64, where there is only one cpu oer node. In the current
code, idle_balance for Opteron -never- works.
Signed-off-by: <habanero@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.30, 2005-01-08 13:44:22-08:00, habanero@us.ibm.com
[PATCH] sched: can_migrate exception for idle cpus
Fix can_migrate to allow aggressive steal for idle cpus. This -was- in
mainline, but I believe sched_domains kind of blasted it outta there. IMO,
it's a no brainer for an idle cpu (with all that cache going to waste) to
be granted to steal a task. The one enhancement I have made was to make
sure the whole cpu was idle.
Signed-off-by: <habanero@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.29, 2005-01-08 13:44:05-08:00, habanero@us.ibm.com
[PATCH] sched: more agressive wake_idle()
This patch addresses some problems with wake_idle(). Currently wake_idle()
will wake a task on an alternate cpu if:
1) task->cpu is not idle
2) an idle cpu can be found
However the span of cpus to look for is very limited (only the task->cpu's
sibling). The scheduler should find the closest idle cpu, starting with
the lowest level domain, then going to higher level domains if allowed
(doamin has flag SD_WAKE_IDLE). This patch does this.
This and the other two patches (also to be submitted) combined have
provided as much at 5% improvement on that "online transaction DB workload"
and 2% on the industry standard J@EE workload.
I asked Martin Bligh to test these for regression, and he did not find any.
I would like to submit for inclusion to -mm and barring any problems
eventually to mainline.
Signed-off-by: <habanero@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.28, 2005-01-08 13:43:47-08:00, neilb@cse.unsw.edu.au
[PATCH] nfsd4_setclientid_confirm locking fix
Avoid unlock-without-lock problem on error path in nfsd4_setclientid_confirm
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.27, 2005-01-08 13:43:31-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: fix ia64 callgraph bug with old gcc
With Keith Owens <kaos@sgi.com>
This patch from Keith Owens fixes a bug in the ia64 port of oprofile when
built without the kdb patch and with a pre-3.4 gcc.
If you build a standard kernel with gcc < 3.4 then
ia64_spinlock_contention_pre3_4 is defined. But a standard kernel does not
have ia64_spinlock_contention_pre3_4_end, that label is only added by the
kdb patch. To get the backtrace profiling with gcc < 3.4, the _end label
needs to be added as part of the kernprof patch, then I will remove it from
kdb.
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.26, 2005-01-08 13:43:14-08:00, tharbaugh@lnxi.com
[PATCH] initramfs: unprivileged image creation
This patch makes several tweaks so that an initramfs image can be
completely created by an unprivileged user. It should maintain
compatibility with previous initramfs early userspace cpio/image creation
and it updates documentation.
There are a few very important tweaks:
CONFIG_INITRAMFS_SOURCE is now either a single cpio archive that is
directly used or a list of directories and files for building a cpio
archive for the initramfs image. Making the cpio archive listable in
CONFIG_INITRAMFS_SOURCE makes the cpio step more official and automated so
that it doesn't have to be copied by hand to usr/initramfs_data.cpio (I
think this was broken anyway and would be overwritten). The alternative
list of directories *and* files means that files can be install in a "root"
directory and device-special files can be listed in a file list.
CONFIG_ROOT_UID and CONFIG_ROOT_GID are now available for doing simple
user/group ID translation. That means that user ID 500, group ID 500 can
create all the files in the "root" directory, but that they can all be
owned by user ID 0, group ID 0 in the cpio image.
Various documentation updates to pull it all together.
Removal of old cruft that was unused/misleading.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.25, 2005-01-08 13:42:57-08:00, tytso@mit.edu
[PATCH] ext3 htree telldir() fix
telldir() is broken on large ext3 dir_index'd directories because
getdents() gives d_off==0 for the first entry
Here's a patch which fixes the problem, but note the following warning
from the readdir man page:
According to POSIX, the dirent structure contains a field char d_name[]
of unspecified size, with at most NAME_MAX characters preceding the
terminating null character. Use of other fields will harm the porta-
bility of your programs.
Also, as always, telldir() and seekdir() are truly awful interfaces
because they implicitly assume that (a) a directory is a linear data
structure, and (b) that the position in a directory can be expressed
in a cookie which hsa only 31 bits on 32-bit systems.
So there will be hash colliions that will cause programs that assume
that seekdir(dirent->d_off) will always return the next directory
entry to sometimes lose directory entries in the
not-as-unlikely-as-we-would wish case of a 31-bit hash collision.
Really, any program which is using telldir/seekdir really should be
rewritten to not use these interfaces if at all possible. So with
these caveats....
What we need to do is wire '.' and '..' to have hash values of (0,0) and
(2,0), respectively, without ignoring other existing dirents with colliding
hashes. (In those cases the programs will break, but they are statistically
rare, and there's not much we can do in those cases anyway.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.24, 2005-01-08 13:42:41-08:00, miltonm@bga.com
[PATCH] INITRAMFS: allow no trailer
According to "initramfs buffer format -- third draft"
http://lwn.net/2002/0117/a/initramfs-buffer-format.php3 "the cpio
"TRAILER!!!" entry (cpio end-of-archive) is optional, but is not ignored"
The kernel handling does not follow this spec. If you add null padding
after an uncompressed cpio without TRAILER!!! the kernel complains "no
cpio magic". In a gzipped archive one gets "junk in gzipped archive"
without the TRAILER!!!
This patch changes the state transitions so the kernel will follow the spec.
Tested: padded uncompressed, padded compressed, unpadded compressed (error)
and trailing junk in compressed (error)
===
I have a boot loader that knows how to load files, determine their size,
and advance to the next 4-byte boundary and reports the total size of the
files loaded. It doesn't understand about converting this number to some
ASCII representation.
With this patch I can embed the contents of a file padded with NULs
with out knowing the exact size of the file with the following files:
1) file containing cpio header & file name, padded to 4 bytes
2) contents of file
3) pad file of zeros, the size at least as large as the that specified
for the file.
hpa points out that you should be careful with the headers, use unique
inode numbers and/or add a cpio header with just TRAILER!!! to reset the
inode hash table to avoid unwanted hard links. I just put this sequence as
the last files loaded.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.23, 2005-01-08 13:42:25-08:00, tharbaugh@lnxi.com
[PATCH] gen_init_cpio symlink, pipe and socket support
This patch makes gen_init_cpio more complete by adding symlink, pipe and
socket support. It updates scripts/gen_initramfs_list.sh to support the
new types. The patch applies to the recent mm series that already have the
updated gen_init_cpio and gen_initramfs_list.sh.
From: William Lee Irwin III <wli@holomorphy.com>
The rest of gen_init_cpio.c seems to cast the result of strlen() to handle
this situation, so this patch follows suit while killing off size_t -related
printk() warnings.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.22, 2005-01-08 13:42:10-08:00, rddunlap@osdl.org
[PATCH] ibmasm: fix init/exit sections
Fix init & exit section usage, started with this diagnostic from
reference_discarded.pl (make buildcheck):
Error: ./drivers/misc/ibmasm/module.o .data refers to 00000058 R_386_32 .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.21, 2005-01-08 13:41:53-08:00, jgarzik@pobox.com
[PATCH] fix sx8 blk driver device naming
Attached fixes sysfs naming of sx8 block devs to follow LANANA naming.
You then get /sys/block/sx8!0, etc instead of /sys/block/sx80_0 (device
names should be /dev/sx8/0 instead of /dev/sx80_0)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.20, 2005-01-08 13:41:36-08:00, pmeda@akamai.com
[PATCH] readdir: return value missed in getdents64
Small issue: return value missed in getdents64, but handled in getdents.
Signed-Off-by: Prasanna Meda <pmeda@akamai.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.19, 2005-01-08 13:41:19-08:00, stsp@aknet.ru
[PATCH] fix cdrom autoclose
The attached patch fixes the CD-ROM autoclose. It is broken in recent
kernels for CD-ROMs that do not properly report that the tray is opened.
Now on such a drives the kernel will do one close attempt and check for the
disc again. This is how it used to work in the past.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Acked-by: Alexander Kern <alex.kern@gmx.de>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.18, 2005-01-08 13:41:01-08:00, nathanl@austin.ibm.com
[PATCH] prohibit slash in proc directory entry names
proc_create() needs to check that the name of an entry to be created does
not contain a '/' character.
To test, I hacked the ibmveth driver to try to call request_irq with a
bogus "foo/bar" devname. The creation of the /proc/irq/1234/xxx entry
silently fails, as intended. Perhaps the irq code should be made to check
for the failure.
Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.17, 2005-01-08 13:40:44-08:00, olh@suse.de
[PATCH] request_irq: avoid slash in proc directory entries
A few users of request_irq pass a string with '/'.
As a result, ls -l /proc/irq/*/* will fail to list these entries.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.16, 2005-01-08 13:40:27-08:00, olof@austin.ibm.com
[PATCH] ppc64: IOMMU cleanups: Main cleanup patch
Earlier cleanup efforts of the ppc64 IOMMU code have mostly been targeted
at simplifying the allocation schemes and modularising things for the
various platforms. The IOMMU init functions are still a mess. This is an
attempt to clean them up and make them somewhat easier to follow.
The new rules are:
1. iommu_init_early_<arch> is called before any PCI/VIO init is done
2. The pcibios fixup routines will call the iommu_{bus,dev}_setup functions
appropriately as devices are added.
TCE space allocation has changed somewhat:
* On LPARs, nothing is really different. ibm,dma-window properties are still
used to determine table sizes.
* On pSeries SMP-mode (non-LPAR), the full TCE space per PHB is split up
in 256MB chunks, each handed out to one child bus/slot as needed. This
makes current max 7 child buses per PHB, something we're currently below
on all machine models I'm aware of.
* Exception to the above: Pre-POWER4 machines with Python PHBs have a full
GB of DMA space allocated at the PHB level, since there are no EADS-level
tables on such systems.
* PowerMac and Maple still work like before: all buses/slots share one table.
* VIO works like before, ibm,my-dma-window is used like before.
* iSeries has not been touched much at all, besides the changed unit of
the it_size variable in struct iommu_table.
Other things changed:
* Powermac and maple PCI/IOMMU inits have been changed a bit to conform to
the new init structure
* pci_dma_direct.c has been renamed pci_direct_iommu.c to match
pci_iommu.c (see separate patch)
* Likewise, a couple of the pci direct init functions have been renamed.
Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.15, 2005-01-08 13:40:11-08:00, olof@austin.ibm.com
[PATCH] ppc64: IOMMU cleanups: rename pci_dma_direct.c
This patch renames pci_dma_direct.c to pci_direct_iommu.c to comply to the
naming convention of the other iommu files.
This is part of the iommu cleanup, but broken out as a separate patch since
for mainline, a BK rename is more appropriate. Still, we need a patch to
apply for non-BK-based trees (-mm)
Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.14, 2005-01-08 13:39:35-08:00, paulus@samba.org
[PATCH] ppc64: Log machine check errors to error log and NVRAM
This patch is from Jake Moilanen <moilanen@austin.ibm.com>.
Log machine check errors to error log and NVRAM.
Signed-off-by: Dave Altobelli <dalto@austin.ibm.com>
Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.13, 2005-01-08 13:39:22-08:00, paulus@samba.org
[PATCH] ppc64: clean up trap handling in head.S
This patch is from Jake Moilanen <moilanen@austin.ibm.com>.
Changed the naming conventions for head.S to more closely follow the Linux
naming conventions.
Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.12, 2005-01-08 13:39:05-08:00, paulus@samba.org
[PATCH] ppc64: clean up trap handling
This patch is from Jake Moilanen <moilanen@austin.ibm.com>.
Clean-up of traps.c. Moved the machine dependent calls to a ppc_md call,
and moved the pSeries specific code to ras.c.
I also changed the naming convention to more closely follow the Linux
standards.
Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.11, 2005-01-08 13:38:49-08:00, paulus@samba.org
[PATCH] ppc64: use newer RTAS call when available
This patch is from Nathan Fontenot <nfont@austin.ibm.com> originally.
The PPC64 EEH code needs a small update to start using the
ibm,read-slot-reset-state2 rtas call if available. The currently used
ibm,read-slot-reset-state call will be going away on future machines.
This patch attempts to use the newer rtas call if available and falls back
the older version otherwise. This will maintain EEH slot checking
capabilities on all future and current firmware levels.
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.10, 2005-01-08 13:38:32-08:00, david@gibson.dropbear.id.au
[PATCH] ppc64: add performance monitor register information to processor.h
Most special purpose registers on the ppc64 have both the SPR number, and
the various fields within the register defined in asm-ppc64/processor.h.
So far that's not true for the performance counter control registers, MMCR0
and MMCRA. They have the SPR numbers defined, but the internal fields are
defined in the oprofile code and (just a few) in traps.c where they're
actually used.
This patch moves all the MMCR0 and MMCRA definitions, plus the MSR
performance monitor bit, MSR_PMM, into processor.h.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.9, 2005-01-08 13:38:16-08:00, nickpiggin@yahoo.com.au
[PATCH] compound pages optimisation
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.8, 2005-01-08 13:37:59-08:00, riel@redhat.com
[PATCH] vmscan: count writeback pages in nr_scanned
OOM kills have been observed with 70% of the pages in lowmem being in the
writeback state. If we count those pages in sc->nr_scanned, the VM should
throttle and wait for IO completion, instead of OOM killing.
(akpm: this is how the code was designed to work - we broke it six months
ago).
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.7, 2005-01-08 13:37:43-08:00, takata@linux-m32r.org
[PATCH] m32r: build fix
This patch is required to fix compile errors for m32r.
This was originally given by the following patch:
[PATCH] move irq_enter and irq_exit to common code
http://www.ussg.iu.edu/hypermail/linux/kernel/0411.1/1738.html
I think it was maybe accidentally dropped only for the m32r arch due to a
patching conflict with the other patches or something like that.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.6, 2005-01-08 13:37:26-08:00, wli@holomorphy.com
[PATCH] hugetlbfs MAINTAINERS update
I'm being at least sometimes deferred to for hugetlb maintenance.
I also originally wrote the fs methods, and generally get stuck
working on it on a regular basis. So here is a MAINTAINERS entry
reflecting that.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.5, 2005-01-08 13:37:05-08:00, takata@linux-m32r.org
[PATCH] oprofile: update m32r for api changes
oprofile m32r arch updates, including some API changes.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.4, 2005-01-08 13:36:49-08:00, akpm@osdl.org
[PATCH] cs416x: use upcase in config
Kconfig symbols are always uppercase.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.3, 2005-01-08 13:04:22-08:00, torvalds@evo.osdl.org
Merge small pipe writes into the write buffers
ChangeSet@1.2247.7.2, 2005-01-08 12:33:15-08:00, hch@lst.de
[PATCH] fix double iget in romfs_fill_super
Acked-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2247.7.1, 2005-01-08 12:07:50-08:00, torvalds@evo.osdl.org
Fix TASK_SIZE range check that got lost in recent
clear_page_range()/4-level page table updates.
ChangeSet@1.2247.2.4, 2005-01-08 07:35:05-08:00, greg@kroah.com
Cset exclude: jmunsin@iki.fi|ChangeSet|20041221190949|45117
Reverted due to problems reported by users
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2247.1.3, 2005-01-08 00:43:14-05:00, jgarzik@pobox.com
[netdrvr s2io] make debug_level variable static
Fixes 'make allyesconfig' build conflict with infiniband, which
also has a global variable named 'debug_level'.
ChangeSet@1.2247.4.4, 2005-01-08 00:04:18+00:00, dave.jiang@com.rmk.(none)
[ARM PATCH] 2363/1: IQ80332 platform port
Patch from Dave Jiang
Signed-off-by: Dave Jiang
This is the IQ80332 platform port that's based off the IOP33x CPU. The IQ80332 is an PCI-express CRB based off the IOP332 processor. Otherwise functionalites are fairly similar to IQ80331.
Signed-off-by: Russell King
ChangeSet@1.2247.5.2, 2005-01-07 15:58:52-08:00, torvalds@ppc970.osdl.org
Fix do_brk() locking in library loader
The regular executable loader path doesn't need the locking,
because it's the only user of its VM. But the same is not true
at library load time. So get the mmap semaphore.
ChangeSet@1.2247.4.3, 2005-01-07 23:36:26+00:00, dave.jiang@com.rmk.(none)
[ARM PATCH] 2362/1: cleanup of PCI defines for IOP321 platforms
Patch from Dave Jiang
Signed-off-by: Dave Jiang
Major cleanup of the 321 PCI defines to make them more coherent. Unified some groups that were per platform to common proc specific. Removed some magic numbers.
Signed-off-by: Russell King
ChangeSet@1.2247.4.2, 2005-01-07 23:30:11+00:00, dave.jiang@com.rmk.(none)
[ARM PATCH] 2361/1: clean up irq handling code for IOP33x platforms
Patch from Dave Jiang
Signed-off-by: Dave Jiang
Substitute 2 asm instr w/ one recommend by RMK.
Signed-off-by: Russell King
ChangeSet@1.2247.6.4, 2005-01-07 15:29:10-08:00, rddunlap@osdl.org
[PATCH] add cpufreq info to Documentation/feature-removal-schedule.txt
Add 2.4.x cpufreq /proc and sysctl interface removal
to the feature-removal-schedule.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
ChangeSet@1.2247.6.3, 2005-01-07 15:24:29-08:00, greg@kroah.com
[PATCH] add feature-removal-schedule.txt documentation
Add Documentation/feature-removal-schedule.txt as a way to notify
everyone when and what is going to be removed.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2247.6.2, 2005-01-07 15:19:51-08:00, greg@kroah.com
Fix up udev url in Documentation/Changes file
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2247.6.1, 2005-01-07 14:36:18-08:00, greg@kroah.com
merge
ChangeSet@1.2247.4.1, 2005-01-07 22:07:15+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2358/1: Add IXP46x I2C platform device
Patch from Deepak Saxena
The IXP46x chips from Intel include the same I2C controller as found
on the IOP3xx. This patch adds a hook to the platform-level init code
to add that device to the device tree if running on a 46x CPU. A
separate patch has been sent upstream via Greg KH for the changes to the
I2C driver to support both IOP and IXP systems.
While at it, we fix a minor issue with the code where we were sending
the wrong ptr to platform_add_devices(). I am not sure how it ever
worked...
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.2247.2.3, 2005-01-07 13:54:11-08:00, greg@kroah.com
Merge kroah.com:/home/greg/linux/BK/bleed-2.6
into kroah.com:/home/greg/linux/BK/i2c-2.6
ChangeSet@1.1938.457.13, 2005-01-07 11:16:13-08:00, rddunlap@osdl.org
[PATCH] i2c-ali1563: fix init & exit section usage
Fix init & exit section usages, beginning with this diagnostic
from reference_discarded.pl (make buildcheck):
Error: ./drivers/i2c/busses/i2c-ali1563.o .data refers to 00000278 R_386_32 .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.12, 2005-01-07 11:15:15-08:00, ladis@linux-mips.org
[PATCH] I2C: let I2C_ALGO_SGI depend on MIPS
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.11, 2005-01-07 11:14:41-08:00, mhoffman@lightlink.com
[PATCH] I2C: add new sensors driver: SMSC LPC47B397-NC
This patch (3rd time's a charm) adds support for the SMSC LPC47B397-NC
sensor chip. It was sponsored by In-Store Broadcasting Network.
Signed-off-by: Craig Kelly (In-Store Broadcasting Network)
Signed-off-by: Glenn Ball (Utilitek Systems, Inc.)
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
ChangeSet@1.1938.455.5, 2005-01-07 10:33:57-08:00, eike-hotplug@sf-tec.de
[PATCH] PCI Hotplug: don't check pointer before kalling kfree in ibmphp_pci.c
Calling kfree() with a NULL pointer is no error so we don't need this check.
Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.455.4, 2005-01-07 10:33:32-08:00, eike-hotplug@sf-tec.de
[PATCH] PCI Hotplug: use PCI_DEVFN in ibmphp_pci.c
This patch changes ibmphp_pci.c to use the PCI_DEVFN makro where possible
instead of doing the match itself.
Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.455.3, 2005-01-07 10:33:06-08:00, eike-hotplug@sf-tec.de
[PATCH] PCI Hotplug: Remove unneeded kmalloc casts from ibmphp_pci.c
this patch removes some unneeded casts from ibmphp_pci.c that cast the result
of kmalloc to some pointer type. It also uses "sizeof(*result)" instead of
"sizeof(type_of_result)".
Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.455.2, 2005-01-07 10:32:39-08:00, domen@coderock.org
[PATCH] hotplug/acpiphp_ibm: module_param fix
File permissins should be octal number.
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.56, 2005-01-07 10:29:46-08:00, david-b@pacbell.net
[PATCH] USB: ehci "hc died" on startup (chip bug workaround)
This fixes OSDL bugid #3056 for at least some users, where the EHCI
driver gets a "fatal error" IRQ on startup ... only on certain boards,
starting with the 2.6.6 or 2.6.7 kernels. These IRQs normally indicate
that an invalid DMA address got passed to the controller, or something
equally nasty and unrecoverable.
But it turns out that some of these controllers (at least ALI and Intel)
are lying. They're issuing these IRQs without stopping, contrary to the
EHCI spec ... so these IRQs can be recovered from. Thanks to Christian
Iversen for noticing that his ALI controller would continue operating,
which was the first real break in this annoying case.
This patch tests for these bogus IRQs, and ignores them ... working around
what's clearly a chip bug. It's not clear why we started triggering that
bug, but at least EHCI is now usable on boards exhibiting this problem.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.55, 2005-01-07 09:07:22-08:00, david-b@pacbell.net
[PATCH] USB: ohci diagnostic tweak
This changes the OHCI "USB HC TakeOver failed" message to be a bit
more informative, by fingering the root cause: a BIOS/SMM bug.
That way they're more likely to either bug the board vendor, or find
workarounds (like tweaking the BIOS setup, or the ohci_hcd no_handshake
parameter) before giving up or (wrongly) reporting a Linux bug.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.54, 2005-01-07 08:46:29-08:00, david-b@pacbell.net
[PATCH] USB: usb makefile tweaks
Two minor Makefile fixes, catching up to some driver removals.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.53, 2005-01-07 08:45:52-08:00, david-b@pacbell.net
[PATCH] USB: definitions for USB2 debug device, debug port
This provides basic definitions to support "USB2 Debug Devices", as
supported by certain EHCI root hub ports (from ALI, Intel, NVidia, and
other vendors). Docs are available at Intel's USB spec webpage.
The basic idea is to help debug "legacy free" systems, with no serial port
for a console or debugger to use. The USB debug port uses PIO to send and
receive at most 8 bytes of high speed data at a time, so it can support one
I/O channel without needing _any_ of the usbcore infrastructure, or DMA,
or IRQs. (Cost can be 2KB rather than ~150KB.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.52, 2005-01-07 08:45:22-08:00, david-b@pacbell.net
[PATCH] USB: minor usb doc/comment fixes
Some minor doc/comment fixes for USB.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2247.2.2, 2005-01-07 08:29:15-08:00, jgarzik@pobox.com
[PATCH] x86-64: kernel/sys.c build fix
On x86-64, the attached patch is required to fix
> kernel/sys.c: In function `sys_setsid':
> kernel/sys.c:1078: error: `tty_sem' undeclared (first use in this function)
> kernel/sys.c:1078: error: (Each undeclared identifier is reported only once
> kernel/sys.c:1078: error: for each function it appears in.)
kernel/sys.c needs the tty_sem declaration from linux/tty.h.
ChangeSet@1.2247.3.1, 2005-01-07 10:46:02+00:00, rmk@flint.arm.linux.org.uk
[MMC] Remove linux/blkdev.h include.
Since we no longer pass a struct request to the MMC host drivers,
it seems pointless including linux/blkdev.h. Instead, include
linux/highmem.h and asm/scatterlist.h as appropriate.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.2229.4.9, 2005-01-06 23:12:02-05:00, ak@suse.de
[PATCH] Fix ADMtek Comet on x86-64
This Tulip clone doesn't like an Cache Line setting over 8 words.
This broke it on x86-64. Make it the same as on i386.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.4.8, 2005-01-06 23:08:35-05:00, gortan@tttech.com
8139cp: support for TTTech MC322
ChangeSet@1.2249, 2005-01-06 22:59:40-05:00, bunk@stusta.de
[PATCH] OSS via82cxxx_audio.c: remove unused CONFIG_SOUND_VIA82CXXX_PROCFS code
> >How else is this information available?
>
> lspci. it's just a verbose dump of PCI config registers.
Sounds reasonable.
Below is a patch to remove the CONFIG_SOUND_VIA82CXXX_PROCFS code.
diffstat output:
sound/oss/via82cxxx_audio.c | 218 ------------------------------------
1 files changed, 1 insertion(+), 217 deletions(-)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2247.1.1, 2005-01-06 22:49:55-05:00, manfred@colorfullife.com
[PATCH] forcedeth: add ethtool get/set_settings support
The patch adds ethtool get_ and set_settings support to the forcedeth nic
driver. This allows to force a certain link speed with ethtool -s.
Supported link speeds: 10 HD&FD, 100 HD&FD, 1000 FD
1000 HD is not supported (probably a hardware restriction), 1000 FD is
only supported with autonegotiation enabled.
Changelog:
- Code reorganization: move ethtool functions further down in forcedeth.c
(no code changes within the existing ethtool functions)
- add support for setting the link setting bits in the nic with
autodetection in the PHY disabled (i.e. use a netdev_priv() variable
instead of querying the PHY)
- implement get_settings and set_settings ethtool functions.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.4.7, 2005-01-06 22:45:32-05:00, shemminger@osdl.org
[PATCH] via-velocity: convert to module_param
Convert via-velocity driver to module_param.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.3.12, 2005-01-07 04:11:38+01:00, bzolnier@trik.(none)
[ide] kill current_capacity()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.8.1, 2005-01-06 22:09:11-05:00, katzj@redhat.com
[PATCH] Fix sx8 device naming in sysfs
Attached fixes sysfs naming of sx8 block devs to follow LANANA naming.
You then get /sys/block/sx8!0, etc instead of /sys/block/sx80_0 (device
names should be /dev/sx8/0 instead of /dev/sx80_0)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.3.11, 2005-01-07 04:06:22+01:00, bzolnier@trik.(none)
[ide] ide_driver_t->abort() cleanup
* add drive->media != ide_disk check to ide_abort()
* kill ide_cdrom_abort() and idedisk_abort()
* split __ide_abort() out of ide_abort()
* call driver->abort() inside ide_abort()
* convert the only user of driver->abort()
* fix default_abort() and idescsi_atapi_abort()
* make idescsi_atapi_abort() static
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.4.6, 2005-01-06 22:05:47-05:00, alex.kern@gmx.de
[PATCH] new PCI_ID for tulip
it exist a PCCARD from SIEMENS, its relabeled DLINK.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.3.10, 2005-01-07 04:03:18+01:00, bzolnier@trik.(none)
[ide] rework ide_driver_t->error
* split __ide_error() out of ide_error()
* call driver->error() inside ide_error()
* convert all users of driver->error()
* fix default_cleanup() and idescsi_atapi_error()
* make idescsi_atapi_error() static
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.6.4, 2005-01-06 21:44:09-05:00, ganesh.venkatesan@intel.com
[PATCH] e100: Documentation/networking/e100.txt update
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.15, 2005-01-06 21:43:32-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Documentation/networking/e1000.txt update
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.3.9, 2005-01-07 03:35:46+01:00, bzolnier@trik.(none)
[ide] cleanup ide_error()
* move idedisk_error() and ide_cdrom_error() to ide-io.c
* rename idedisk_error() to ide_ata_error()
* rename ide_cdrom_error() to ide_atapi_error()
* use ide_{ata,atapi}_error() in ide_error()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.3.8, 2005-01-07 03:31:43+01:00, bzolnier@trik.(none)
[ide] cleanup ide_dump_status()
* move idedisk_dump_status() and ide_dump_status() to ide-lib.c
* rename idedisk_dump_status() to ide_dump_ata_status()
* use ide_dump_{ata,atapi}_status() in ide_dump_status()
* use ide_dump_status() in ide-cd.c, ide-disk.c and ide-scsi.c
* make ide_dump_opcode() and ide_dump_atapi_status)() static
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.7.14, 2005-01-06 21:30:57-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Driver version number, white spaces, comments, device id
& other changes
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.13, 2005-01-06 21:30:44-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Applied smart speed fix where the code was forcing smart
speed on all the time. Now it will honor the setting defined in the
eeprom.
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.12, 2005-01-06 21:30:30-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Applied eeprom fix where it was possible to read/write
one more word than what should have been possible.
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.11, 2005-01-06 21:30:15-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Added workaround to prevent inadvertent gigabit waveform
to be sent out on the wire due to init-time operations on the IGP phy.
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.10, 2005-01-06 21:30:00-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Kernel API change for Module_param_array_named
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.9, 2005-01-06 21:29:45-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: {set, get}_wol is now symmetric for 82545EM adapters
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.8, 2005-01-06 21:29:32-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Fix tx resource cleanup logic
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.7, 2005-01-06 21:29:19-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Replace schedule_timeout() with
msleep()/msleep_interruptible() nacc@us.ibm.com
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.6, 2005-01-06 21:29:03-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: remove a redundant assignment to a local nr_frags in e1000_xmit_frame.
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.5, 2005-01-06 21:28:48-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Avoid filling tx_ring completely - shemminger@osdl.org
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.4, 2005-01-06 21:28:33-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Enabling NETIF_F_SG without checksum offload is illegal
-- jdmason@us.ibm.com
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.3, 2005-01-06 21:28:20-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Fix ethtool diagnostics -- specifically for blade server
implementations
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.2, 2005-01-06 21:28:05-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: Fix kernel panic when the interface is brought down while
the NAPI enabled driver is under stress
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.7.1, 2005-01-06 21:27:50-05:00, ganesh.venkatesan@intel.com
[PATCH] e1000: ITR does not default correctly on 2.6.x kernels
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.3.7, 2005-01-07 03:27:20+01:00, bzolnier@trik.(none)
[ide] add ide_dump_opcode()
* add it to ide-lib.c and cleanup ide{disk}_dump_status()
* as a bonus it fixes unknown opcode reporting in ide_dump_status()
* use ide_dump_opcode() in ide_dump_atapi_status()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.6.3, 2005-01-06 21:23:45-05:00, ganesh.venkatesan@intel.com
[PATCH] e100: Update driver version number
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.6.2, 2005-01-06 21:23:35-05:00, ganesh.venkatesan@intel.com
[PATCH] e100: Sort Device IDs
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.6.1, 2005-01-06 21:23:23-05:00, ganesh.venkatesan@intel.com
[PATCH] e100: Replace locally implemented delay routines
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.3.6, 2005-01-07 03:19:40+01:00, bzolnier@trik.(none)
[ide] kill write-only ide_driver_t->sense
also kill default_sense() in ide.c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.3.5, 2005-01-07 03:17:30+01:00, bzolnier@trik.(none)
[ide] PCI quirk for ICH3-M IDE
From: Jim Paris <jim@jtan.com>
Bartlomiej: I have an ICH3-M controller on my laptop. The BIOS is
leaving the prog-if as 0x8E (primary = legacy, secondary = native).
When the PCI interrupt is routed (either in the IDE driver's
pci_enable_device, or earlier if pci=routeirq is used), unhandled
interrupts cause IRQ 9 to be disabled, breaking most of my other
hardware. This seems to be caused by having the nonexistant secondary
interface set to native mode. According to the datasheet I checked,
having different modes for primary/secondary is not an allowed
combination anyway, so the following PCI quirk checks for this case
and forces both interfaces to legacy if true.
It may make sense to make this more generic (this problem may affect
other PCI IDs as well), or it may be better solved in the IDE driver,
at least when pci=routeirq is not used. But the following patch does
work well for me.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.5.1, 2005-01-06 21:10:14-05:00, jason.d.gaston@intel.com
[PATCH] SATA support for Intel ICH7
Reposting patch with word wrap turned off. Please let me know if
this is still not formated correctly.
This patch adds the Intel ICH7 DID's to the ata_piix.c SATA driver,
ahci.c SATA AHCI driver and quirks.c for ICH7 SATA support.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.4.5, 2005-01-06 21:08:34-05:00, alan@lxorguk.ukuu.org.uk
[PATCH] ULi support for 526X tulip variants
Signed-off-by: Alan Cox <alan@redhat.com>
from a 2.4 change by Clear Zhang (signed off by Clear Zhang)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.4.4, 2005-01-06 21:08:19-05:00, akpm@osdl.org
[PATCH] Multicast filtering for tun.c
From: Shaun Jackman <sjackman@gmail.com>
This patch adds multicast filtering to the TUN network driver, for
packets being sent from the network device to the character device.
* drivers/net/tun.c: Add multicast filtering for packets travelling from
the network device to the character device.
* include/linux/if_tun.h (tun_struct): Add interface flags, a hardware
device addres, and a multicast filter.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.4.3, 2005-01-06 21:08:07-05:00, akpm@osdl.org
[PATCH] xircom_tulip_cb.c build fix
From: Bernhard Rosenkraenzer <bero@arklinux.org>,
Adrian Bunk <bunk@stusta.de>
- Define `debug' before using it.
- remove now-unneeded module_parm_array hack.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.4.2, 2005-01-06 21:07:54-05:00, akpm@osdl.org
[PATCH] net: Netconsole poll support for 3c509
From: Con Kolivas <kernel@kolivas.org>
This patch provides poll support to allow netconsole to work with 3c509
network cards.
Status: Compiled, debugged and tested working by Michael Buesch.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.4.1, 2005-01-06 21:07:40-05:00, akpm@osdl.org
[PATCH] via-rhine warning fix
drivers/net/via-rhine.c: In function `rhine_init_one':
drivers/net/via-rhine.c:864: warning: long unsigned int format, pointer arg (arg 4)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.3.4, 2005-01-07 03:05:26+01:00, bzolnier@trik.(none)
[ide] fix erroneous rq->buffer = NULL in ide-io.c:ide_dma_timeout_retry()
From: Prarit Bhargava <prarit@sgi.com>
Please see discussion related to this patch here,
http://marc.theaimsgroup.com/?l=linux-ide&m=110485007824374&w=2
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2247, 2005-01-06 17:58:16-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] Fix up compiler inefficiencies
Oh, bugger...
The recent mmzone.h change triggered some very, very ugly things in
next_zone(), is_highmem(), is_normal() and zone_idx() because it changed
the size of "struct zone" subtly.
Pointer subtraction is no fun when sizeof of object gets weird and poor
gcc blows its brains out trying to optimize that... This slowed down an
ARM cross-build by a factor of 2.5.
Turn the pointer subtraction tests into pointer addition tests instead
where possible, making them trivial to deal with (and gets better code,
in addition to faster compile).
zone_idx() still does a subtraction.
ChangeSet@1.2229.3.3, 2005-01-07 02:47:15+01:00, bzolnier@trik.(none)
[ide] disable debug in IDE ppc/pmac driver
Ben did not disagree to hide the 3 additional lines printed when booting
my ibook with the 'quiet' cmdline option.
I think these debug printk have no real value for normal operation.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.3.2, 2005-01-07 02:42:30+01:00, bzolnier@trik.(none)
[ide] remove CRD-8480C from the DMA blacklist
Reported to work OK by Daniel Robitaille <robitaille@gmail.com>.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.2229.3.1, 2005-01-07 02:35:49+01:00, bzolnier@trik.(none)
[ide] remove pci_disable_device() calls from setup-pci.c and sgiioc4.c
On Mon, 03 Jan 2005 21:44:33 +0000, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
>
> Different PCI functions are but nothing requires that the PCI function
> that is the IDE controller is only the IDE controller. In some cases
> other logic lives in the "spare" BAR register areas of the device.
>
> One example where the weird design makes it obvious is the CS5520. Here
> the 5520 bridge has the IDE in one BAR and all sorts of other logic
> (including the xBUS virtual ISA environment) in the same PCI function.
> On that chip a pci_disable_device on the IDE pci_dev turns off mundane
> things like the timer chips keyboard and mouse 8).
>
> Other vendors do equally evil things and providing the chip reports IDE
> class and has the IDE BARs set up nobody else is any the wiser and
> presumably gate count goes down.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.439.51, 2005-01-06 17:29:21-08:00, oliver@neukum.org
[PATCH] USB: another workaround for cdc-acm
there are a lot of buggy modems.
Signed-Off-By: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.50, 2005-01-06 17:28:51-08:00, jlamanna@gmail.com
[PATCH] USB: ov511.c - vfree() checking cleanups
ov511.c vfree() checking cleanups.
Signed-off by: James Lamanna <jlamanna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.49, 2005-01-06 17:28:25-08:00, david-b@pacbell.net
[PATCH] Driver Core: handle bridged platform bus segments
During setup to access platform bus segments through bridges, the current
platform_device_register() ignores the resource parent specified by the
bridge. That means it'll always detect a (false) resource conflict with
the bridge, and fail the resource reservation step.
This patch makes that code use the specified parent resource, defaulting
to "iomem_resource" or "ioport_resource" only for a NULL parent (that is,
for devices that aren't accessed through a bridge).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.48, 2005-01-06 17:27:58-08:00, david-b@pacbell.net
[PATCH] USB: fix serial gadget oops during enumeration
This prevents the serial gadget driver from oopsing during enumeration
when spinlocks are configured, and slab poisoning is active...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2229.2.5, 2005-01-06 19:47:40-05:00, akpm@osdl.org
[PATCH] r8169: oversized driver field for ethtool
From: Francois Romieu <romieu@fr.zoreil.com>
Reported by Richard Dawe <rich@phekda.gotadsl.co.uk>:
- RTL8169_DRIVER_NAME contains more than the 32 characters allowed for the
driver field;
- remove RTL8169_DRIVER_NAME as it is only used once.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.2.4, 2005-01-06 19:47:22-05:00, akpm@osdl.org
[PATCH] r8169: reduce max MTU for large frames
From: Francois Romieu <romieu@fr.zoreil.com>
The device does not support the whole mtu range it claims. Experimenting
with the Tx threshold and/or the PCI burst size does not seem to improve
the behavior.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.2.3, 2005-01-06 19:47:06-05:00, akpm@osdl.org
[PATCH] r8169: Large Send enablement
From: Francois Romieu <romieu@fr.zoreil.com>
Large Send enablement.
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.2.2, 2005-01-06 19:46:44-05:00, akpm@osdl.org
[PATCH] r8169: C 101
From: Francois Romieu <romieu@fr.zoreil.com>
Back to C101 and code which gives the expected result.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2229.2.1, 2005-01-06 19:46:27-05:00, akpm@osdl.org
[PATCH] r8169: missing netif_poll_enable and irq ack
From: Francois Romieu <romieu@fr.zoreil.com>
- (noticed by Jon D. Mason) rtl8169_wait_for_quiescence() needs to disable
the NAPI processing but it has no reason to lock any part of the driver
which would try to do the same at a later time. Let's reenable NAPI
processing as soon as possible.
- properly ack any aborted interruption: a reset of the device is not
always enough.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.2245, 2005-01-06 16:41:45-08:00, torvalds@ppc970.osdl.org
Merge http://lia64.bkbits.net/linux-ia64-release-2.6.11
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.2244, 2005-01-06 16:40:16-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] First cut at setsid/tty locking
Use the existing "tty_sem" to protect against the process tty changes
too.
ChangeSet@1.2243, 2005-01-06 16:40:02-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] Resurrect ISICOM serial
The isicom driver had bitrotted badly and although it had some 2.6
cleanup work didn't actually do anything useful. ISIcom had their own
2.4 driver which didn't work with 2.6 either but had done the hard work
like the locking rewrites. So I nailed them together and then fixed
some obvious bugs in the ISIcom driver version.
ChangeSet@1.1938.439.47, 2005-01-06 16:39:32-08:00, jbarnes@engr.sgi.com
[PATCH] fix oops when reading resourceN files in sysfs
On Thursday, January 6, 2005 12:25 pm, Jesse Barnes wrote:
> [Sorry about the bogus reply, I don't have the original message.]
>
> That shouldn't happen. Maybe you were running an old version of the tree
> or an old version of my sysfs mmap patch? When I do a 'bk pull' of
> gregkh's latest usb tree into a recent Linus tree, I get an -EINVAL, not an
> oops. An earlier version of my patch had this bug though, so maybe that's
> what you're seeing?
Ugg. How about this?
Zero out newly allocated bin_attributes for legacy I/O, memory and resource
files since we won't fill in all of the file operation methods. This will
allow the checks in bin.c for the existence of a method to work properly
instead of checking garbage memory.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.46, 2005-01-06 16:39:01-08:00, juhl-lkml@dif.dk
[PATCH] add printing of udev version to scripts/ver_linux
Since udev is starting to be used a lot of places and I've seen people get
asked about their udev version a few times on lkml I figured it was
perhaps time that scripts/ver_linux reported this info so it would get
into more bugreports by default.
This patch adds printing of udev version to scripts/ver_linux
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.439.45, 2005-01-06 16:38:08-08:00, akpm@osdl.org
[PATCH] debugfs-typo-fix
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2215.3.4, 2005-01-07 00:37:02+00:00, dave.jiang@com.rmk.(none)
[ARM PATCH] 2356/1: cleanup for compliance of machine ID and ATAG for IOP platforms
Patch from Dave Jiang
Signed-off-by: Dave Jiang
Latest IOP official release of redboot now supports the proper machine IDs for all IOP platforms and also pass in the correct amount of memory available via ATAG. Removing hard coded stuff now that we can get the proper info from redboot.
Signed-off-by: Russell King
ChangeSet@1.2242, 2005-01-06 16:35:37-08:00, kas@fi.muni.cz
[PATCH] cosa.h ioctl numbers
Make COSA ioctl numbers compatible with previous kernels.
Signed-off-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2241, 2005-01-06 16:35:24-08:00, kas@fi.muni.cz
[PATCH] cosa.c intialization crash
This fixes crash on insmod of the cosa.ko module - the sppp_attach() was
called too early when dev->priv has not been set up yet.
Signed-off-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2240, 2005-01-06 16:35:10-08:00, yuasa@hh.iij4u.or.jp
[PATCH] mips: remove duplicate _end entry
This is already declared in asm-generic/sections.h
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2239, 2005-01-06 16:34:59-08:00, hch@lst.de
[PATCH] ppc64: export ppc64_caches for afs/ntfs
they use clear_page, which in turn uses ppc64_caches so it needs to be
exported.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2238, 2005-01-06 16:34:44-08:00, bunk@stusta.de
[PATCH] fix MTD_BLOCK2MTD dependency
The patch below fixes an obviously wrong dependency.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2237, 2005-01-06 16:34:31-08:00, akpm@osdl.org
[PATCH] mmc build fix
Usual workaround for the gcc-2.95.x macro expansion bug.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2236, 2005-01-06 16:34:18-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: add missing pte_read function
this patch adds the missing pte_read function and makes s390 compile again.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2235, 2005-01-06 16:34:05-08:00, akpm@osdl.org
[PATCH] __GFP_ZERO pktcdvd fix
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2229.1.1, 2005-01-06 16:29:13-08:00, torvalds@ppc970.osdl.org
Make pipe data structure be a circular list of pages, rather than
a circular list of one page.
This improves pipe throughput, and allows us to (eventually)
use these lists of page buffers for moving data around efficiently.
ChangeSet@1.2215.3.3, 2005-01-07 00:23:13+00:00, dave.jiang@com.rmk.(none)
[ARM PATCH] 2355/1: cleanup of PCI defines for IOP33x platforms
Patch from Dave Jiang
Signed-off-by: Dave Jiang
Major cleanup of the IOP33x family platform PCI defines. Hopefully should be more coherent and removed some magic numbers. Also should be finalized with the latest redboot ATU config.
Signed-off-by: Russell King
ChangeSet@1.1938.457.10, 2005-01-06 16:22:21-08:00, R.Marek@sh.cvut.cz
[PATCH] I2C: vid version detection fix
AMD 64 uses same VID table as Opteron.
Source:
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25112.PDF
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2215.3.2, 2005-01-07 00:12:42+00:00, dave.jiang@com.rmk.(none)
[ARM PATCH] 2352/1: Increase amount of physical memory addressable on IOP platforms
Patch from Dave Jiang
Signed-off-by: Dave Jiang
Move the VMALLOC_END to 0xfe000000 from 0xe8000000 to increase the amount of physical memory addressable on XScale IOP platforms.
Signed-off-by: Russell King
ChangeSet@1.2215.3.1, 2005-01-06 23:58:39+00:00, gtj.member@com.rmk.(none)
[ARM PATCH] 2334/1: Corrects ixp4xx USB base addr and adds QMGRr/EthA/EthB in ixp4xx-regs.h
Patch from George Joseph
Corrects the IXP4XX_USB_BASE offset to be 0xB000 instead of overlapping TIMER at 0x5000. Also adds IXP4XX_QMGR_BASE and offsets for EthA and EthB.
Signed-off-by: George T. Joseph
Signed-off-by: Russell King
ChangeSet@1.2215.1.5, 2005-01-06 23:27:12+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add basic SMP support.
Add the beginnings of SMP support to the ARM architecture, providing
smp.c, smp.h, and cpu.h. Convert setup.c to use per-cpu for
topology initialisation.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.2226.1.4, 2005-01-06 15:13:51-08:00, davem@nuts.davemloft.net
Merge bk://kernel.bkbits.net/acme/connection_sock-2.6
into nuts.davemloft.net:/disk1/BK/net-2.6
ChangeSet@1.1938.457.9, 2005-01-06 15:05:54-08:00, dsaxena@plexity.net
[PATCH] Update IOP3xx I2C bus driver
The following patch is a major cleanup of the IOP3xx I2C bus driver
that is found on Intel's IOP and IXP chipsets. The existing driver in
the 2.6 tree uses hardcoded I/O addresses based on board configuration
which is just going to get ugly as more chips use this unit. The update
switches to using the driver model and passing in the I/O addresses
via platform_device resources. The patch also updates the ID name to
more closely match the actual usage of the device.
I have tested this new driver on IXP46x systems and Dave Jiang has
tested it on both IOP321 and IOP331 systems. ARM-specific patches
to provide platform-level hooks will go upstream after this patch
is integrated.
An example of using the new driver (from IXP46x ARM code) follows:
static struct resource ixp46x_i2c_resources[] = {
[0] = {
.start = 0xc8011000,
.end = 0xc801101c,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IXP4XX_I2C,
.end = IRQ_IXP4XX_I2C,
.flags = IORESOURCE_IRQ
}
};
static struct platform_device ixp46x_i2c_controller = {
.name = "IOP3xx-I2C",
.id = 0,
.num_resources = 2,
.resource = &ixp46x_i2c_resources
};
static struct platform_device *ixp46x_devices[] __initdata = {
&ixp46x_i2c_controller
};
void __init ixp4xx_init(void)
{
if (cpu_is_ixp46x()) {
platform_add_devices(ixp46x_devices,
ARRAY_SIZE(ixp46x_devices));
}
}
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.8, 2005-01-06 15:05:25-08:00, khali@linux-fr.org
[PATCH] I2C: Update fscher pwm functionality
This is a small update to the fscher hardware monitoring chip driver.
More specifically it fixes two aspects of pwm:
1* Use the new sysfs names (e.g. pwm1 instead of fan1_pwm).
2* Better handling of out-of-range pwm values.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.7, 2005-01-06 15:04:58-08:00, david-b@pacbell.net
[PATCH] I2C: minor isp1301_omap tweaks
Minor cleanups to the isp130_omap driver: enable the right
amount of VBUS current draw in non-OTG configurations; get rid
of a warning from GCC 2.95.3 ("int" function returns no value);
use kcalloc() not kmalloc+memset.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2226.1.3, 2005-01-06 15:01:07-08:00, davem@nuts.davemloft.net
[TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.2226.1.2, 2005-01-06 14:58:57-08:00, davem@nuts.davemloft.net
[TG3]: Fix signedness issues in PHY read/write loops.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.2226.1.1, 2005-01-06 14:55:45-08:00, davem@nuts.davemloft.net
[TG3]: Return 0 when PHY read times out, not all-ones.
Noticed by Peter Chubb.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.470.7, 2005-01-06 14:55:28-08:00, jbarnes@sgi.com
[IA64] swiotlb.c: long line, whitespace, and other cleanup
Clean up swiotlb.c a bit in preparation for some other changes that might be
coming (e.g. moving it to the top level lib/ directory, adding support for
more uses). Mostly whitespace and long line fixes, along with a few printk
fixes.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
ChangeSet@1.2233, 2005-01-06 17:37:45-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/viro-old-eth
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.2232, 2005-01-06 17:36:39-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/iomap
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.2231, 2005-01-06 17:35:36-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/8390
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.1938.457.6, 2005-01-06 13:55:55-08:00, khali@linux-fr.org
[PATCH] I2C: Add byte commands to i2c-stub
While working on EEPROMs, DDC/EDID and the like these last few days, I
wanted to use your i2c-stub driver to test my code. However, I noticed
that it wouldn't handle byte commands, while both i2cdetect and the
eeprom driver need it for proper operation. Thus I added this
functionality to the driver. What do you think about it?
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.5, 2005-01-06 13:55:26-08:00, khali@linux-fr.org
[PATCH] I2C: Fix MAX6657/8/9 detection in lm90
I received no additional feedback about my MAX6657/8/9 detection fix.
Since it was correct for the only chips I got a report for, I propose we
apply it. After all, maybe people don't know they have such a chip
because the detection was previously not correct.
The patch below is the one I sent to the LM Sensors and Linux Kernel
mailing-lists two weeks ago, unchanged. Thanks.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.4, 2005-01-06 13:54:52-08:00, khali@linux-fr.org
[PATCH] I2C: Improve VID code for the W83627THF
This patch cleans up and improves the VID pins value retrieval for the
W83627THF chip in the w83627hf driver. Tested successfully by Mark
Hoffman. The previous code was using an unrelated lock and reading
register values it didn't need. The new code supports 6-bit VID values
(as defined by Intel VRM 10), and also ensures that the GPIO pins are
possibly used as VID inputs.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.3, 2005-01-06 13:54:20-08:00, khali@linux-fr.org
[PATCH] I2C: Add secondary Super-I/O address support to
This patch adds support for the secondary Super-I/O address to the
w83627hf driver. Most manufacturer use the primary address but at least
the EPoX EP-9NDA3+ had a Winbond W83627THF at the secondary address.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.1938.457.2, 2005-01-06 13:53:47-08:00, mhoffman@lightlink.com
[PATCH] I2C: probe fewer addresses for asb100 (sensors) driver
This patch limits SMBus scanning for the asb100 sensor chip
to just one address - the only one we've ever seen in practice.
Signed-off-by Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
ChangeSet@1.2228, 2005-01-06 10:23:40-08:00, domen@coderock.org
[PATCH] arm26: Remove unreferenced file
Remove nowhere referenced file. (egrep "filename\." didn't find anything)
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2227, 2005-01-06 09:10:17-08:00, torvalds@ppc970.osdl.org
Use 'free_pipe_info()' helper function for pipe closedown.
This avoids having fs/fifo.c having to know anything about
pipe data passing details, and cleans up the code.
ChangeSet@1.2226, 2005-01-05 16:12:23-08:00, dhowells@redhat.com
[PATCH] FRV: Update banner comments at the top of frv arch files
This updates the banner comments at the top of the frv arch files so
that they don't proclaim to be part of the m68k arch and also to
attribute responsibility for them to myself.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2225, 2005-01-05 16:12:09-08:00, dhowells@redhat.com
[PATCH] Make pud_alloc() and pmd_alloc() non-existant on !MMU
This makes the general pud_alloc() and pmd_alloc() inline functions
unavailable if CONFIG_MMU is not defined.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2224, 2005-01-05 16:11:57-08:00, dhowells@redhat.com
[PATCH] FRV: provide stub asm/a.out.h
This provides a stub asm/a.out.h for the FRV arch. This shouldn't be
necessary as FRV doesn't support the AOUT binfmt, but it seems to be
required by some archs for compilation of fs/exec.c.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2223, 2005-01-05 16:11:43-08:00, dhowells@redhat.com
[PATCH] FRV: remove excess argument passed to expand_stack()
This removes the excess argument being passed to expand_stack() as it
isn't needed in -bk8.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2222, 2005-01-05 16:11:30-08:00, dhowells@redhat.com
[PATCH] FRV: vperfctr syscalls don't exist in -bk8
This marks the vperfctr syscalls as unavailable as they aren't actually
implemented in -bk8.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2221, 2005-01-05 15:46:52-08:00, torvalds@ppc970.osdl.org
fbmem: don't mix code/declarations. That messes up gcc-2.95
ChangeSet@1.2220, 2005-01-05 15:36:59-08:00, clameter@sgi.com
[PATCH] Make page allocator aware of requests for zeroed memory
Thisintroduces __GFP_ZERO as an additional gfp_mask element to allow to
request zeroed pages from the page allocator:
- Modifies the page allocator so that it zeroes memory if __GFP_ZERO is
set
- Replace all page zeroing after allocating pages by prior allocations with
allocations using __GFP_ZERO
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2215.1.4, 2005-01-06 00:17:21+00:00, rmk@flint.arm.linux.org.uk
[ARM] Update mach-types file.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.2215.1.3, 2005-01-05 23:58:22+00:00, rmk@flint.arm.linux.org.uk
[ARM] Quieten compiler warnings, etc with ARM set_pmd()
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.2215.1.2, 2005-01-05 23:44:45+00:00, buytenh@org.rmk.(none)
[ARM PATCH] 2351/1: fix compilation for ixp2000 enp2611 and ixdp2400 platforms
Patch from Lennert Buytenhek
Instead of 'struct sys_timer', the ixdp2400 code has 'struct timer' and the enp2611 has just 'struct', preventing compilation for both machine types. This patch fixes it up.
Signed-off-by: Lennert Buytenhek
Signed-off-by: Russell King
ChangeSet@1.2215.1.1, 2005-01-05 23:38:44+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2348/1: Fix IXDP2800 PCI irq mapping
Patch from Deepak Saxena
Our case statments are looking at the devfn, but the existing code
does a switch(PCI_SLOT(dev->devfn)). This causes all PCI devices
behind the first bridge to be configured with IRQ 0. Bad.
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1971.2.1, 2005-01-05 13:12:57-08:00, davem@nuts.davemloft.net
[SPARC64]: We really do need to mask the start/end args to flush_tlb_pgtables().
The callers used to do it, but with the 4-level page
table code this is no longer the case. Noticed by
Nick Piggin and Andrew Morton.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.2218, 2005-01-05 11:12:32-08:00, torvalds@ppc970.osdl.org
Merge bk://drm.bkbits.net/drm-linus
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.2217, 2005-01-05 11:11:30-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] Fix megaraid oops on unload
Reported by Wakko Warner.
The megaraid driver is trying to remove a non-empty directory in procfs.
Trivially fixed by first unregistering the driver, which will remove all
the per-controller files in the megaraid directory, and only _then_
removing the megaraid /proc directory entry.
ChangeSet@1.2216, 2005-01-05 19:11:47+01:00, dwmw2@shinybook.infradead.org
Merge shinybook.infradead.org:/home/dwmw2/bk/linus-2.6
into shinybook.infradead.org:/home/dwmw2/bk/mtd-2.6
ChangeSet@1.1938.480.17, 2005-01-05 19:08:53+01:00, domen@coderock.org
MTD: Remove gratuitous (void *) casts.
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.16, 2005-01-05 18:53:19+01:00, dwmw2@shinybook.infradead.org
MTD: Remove long-obsolete DiskOnChip 1000 driver.
ChangeSet@1.1938.480.15, 2005-01-05 18:47:09+01:00, dwmw2@shinybook.infradead.org
MTD: Cosmetic ident catchup.
Let the CVS idents catch up where changes have been made upstream.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.14, 2005-01-05 18:43:36+01:00, dwmw2@shinybook.infradead.org
[MTD] add missing dependencies on MTD_PARTITIONS
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.13, 2005-01-05 18:39:49+01:00, dwmw2@shinybook.infradead.org
MTD: Fix config option name in Makefile for IBM 750FX/750GX boards.
Also some cosmetic fixes in the map driver itself.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.12, 2005-01-05 18:36:19+01:00, dwmw2@shinybook.infradead.org
MTD: include moduleparam.h in DiskOnChip driver
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.11, 2005-01-05 18:25:43+01:00, rpurdie@rpsys.net
MTD SharpSL NAND driver: Calculate partitions sizes at runtime.
This allows one kernel build to support multiple machines.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.10, 2005-01-05 18:22:57+01:00, joern@wh.fh-wedel.de
[MTD] New blockdev-backed 'fake' MTD device.
Rewritten alternative driver by Gareth Bult and J�rn Engel.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.9, 2005-01-05 18:17:59+01:00, juhl-lkml@dif.dk
[MTD] remove unnecessary casts from drivers/mtd/maps/nettel.c and kill two warnings
I took a look at the cause for these warnings in the 2.6.10 kernel,
drivers/mtd/maps/nettel.c:361: warning: assignment makes pointer from integer without a cast
drivers/mtd/maps/nettel.c:395: warning: assignment makes pointer from integer without a cast
and as far as I can see the casts in there (to unsigned long and back to
void*) are completely unnessesary ('virt' in 'struct map_info' is a void
__iomem *), and getting rid of those casts buys us a warning free build.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.480.8, 2005-01-05 18:15:36+01:00, dwmw2@shinybook.infradead.org
[MTD] Bug in 2.6.10 mtd driver for physmem mapped flash chips
The patch below fixes a small but fatal bug in the code that handles
non-buswidth-aligned writes. The problem is that the code used the same
index in both map_word and buf, therefore putting the wrong words in the
map_word that partially contains old data and partially contains new
data. The result: corrupt data is being written.
Signed-off-by: Koen Martens <kmartens@sonologic.nl>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
ChangeSet@1.1938.1.211, 2005-01-05 08:10:25+01:00, perex@suse.cz
[ALSA] 1.0.8rc2
ChangeSet@1.2215, 2005-01-04 21:57:13-08:00, rbultje@ronald.bitfreak.net
[PATCH] zr36067 driver - reduce stack size usage
Reduce local variable (large struct) stack usage in zoran_do_ioctl() from 1028
bytes to 324 bytes (on x86-32) by declaring & using only 1 "struct
zoran_jpg_settings" instead of 5 instances of it. Reduced from 5 * 180 bytes
to 1 * 180 bytes, plus other locals in each case.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2214, 2005-01-04 21:57:00-08:00, rbultje@ronald.bitfreak.net
[PATCH] zr36067 driver - ppc/be port
Attached patch adds some host<->le conversion functions for 32-bit integers.
The hardware expects 32-bit integers, which the host does not always provide.
With the attached patch, the hardware runs fine on PPC hardware as well.
Original patch by Ben Capper <benandeve@optusnet.com.au>.
Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2213, 2005-01-04 21:56:47-08:00, rbultje@ronald.bitfreak.net
[PATCH] zr36067 driver - correct jpeg app/com markers
Attached patch fixes the writing of APP (application-specific) and COM
(comment) markers in the JPEG stream as generated by the zr36050 or zr36060
encoders, both part of the zr36067 driver.
During separating those bits out of the main zoran driver, we accidently
removed the interface through which applications can adapt those markers,
replacing them by unchangeable (static) markers. Some video formats,
particularly Quicktime and AVI, require specific container-specific markers in
the stream for interlaced streams. Those markers specify field order and
such.
The attached patch re-adds this feature so that decoders depending on those
container-specific markers for correct playback will work correctly.
Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2212, 2005-01-04 21:56:34-08:00, adaplas@hotpop.com
[PATCH] fbdev: Reduce stack usage of intelfb
Reduce stack usage in intelfb_set_par() from 2404 bytes (on x86-32) to 12
bytes.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2211, 2005-01-04 21:56:21-08:00, adaplas@hotpop.com
[PATCH] fbdev: Fix default timings in vga16fb
From: Martin Wilck
..I am asking because we have encountered a video device that obviously
has problems displaying the standard mode of the vga16fb driver...
The default timings give a vtotal of 529 instead of 525 in 640x480@60.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2210, 2005-01-04 21:56:08-08:00, adaplas@hotpop.com
[PATCH] fbdev: Add Viewsonic PF775a to broken display database
Add Viewsonic PF775a to broken display database
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2209, 2005-01-04 21:55:55-08:00, adaplas@hotpop.com
[PATCH] fbdev: Do a symbol_put for each symbol_get in savagefb
Do a symbol_put() for each symbol_get() in savagefb.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2208, 2005-01-04 21:55:42-08:00, adaplas@hotpop.com
[PATCH] fbdev: Check return value of fb_add_videomode
The function fb_add_videomode can fail, check return value.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2207, 2005-01-04 21:55:29-08:00, adaplas@hotpop.com
[PATCH] fbcon/fbdev: Add blanking notification
Add blanking event to the notifier call chain. This can be used by fbcon
to blank/unblank the console, and theoretically, by backlight drivers.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2206, 2005-01-04 21:55:16-08:00, adaplas@hotpop.com
[PATCH] fbdev: Revive global_mode_option
The global_mode_option is useful for choosing the initial video mode
without specifying the driver, ie 'video=1024x768@60'. After the
initialization cleanup, this variable was accidentally removed. This patch
brings it back again.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2205, 2005-01-04 21:55:03-08:00, adaplas@hotpop.com
[PATCH] fbdev: Revive BIOS-less booting for Rage XL cards
The file drivers/video/aty/xlinit.c is currently unused. This file might be
useful to boot some types of RageXL cards on non-x86 platforms.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2204, 2005-01-04 21:54:49-08:00, adaplas@hotpop.com
[PATCH] fbdev: Cleanup i2c code of rivafb
- Change timings to as close as possible to VESA specs and
use msecs_to_jiffies() instead of hard-coded number
- Attempt to read all i2c busses regardless of chipset type
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2203, 2005-01-04 21:54:37-08:00, jbarnes@engr.sgi.com
[PATCH] fix ROM enable/disable in r128 and radeon fb drivers
Both the r128 and radeon fb drivers do bad things with the PCI BAR
corresponding to their option ROM. They incorrectly use the host address
instead of the BAR address to enable the ROM, and then incorrectly lose the
original value on unmap. This patch fixes both problems. Tested on Altix.
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2202, 2005-01-04 21:54:23-08:00, jim.hague@acm.org
[PATCH] pm2fb: fix fbi image display on 24 bit depth big endian
Handle 24bit on big-endian by leaving the hardware in RGB and using the
colour offset to reverse red/blue. Leaving the hardware in RGB means that
fbi displays images correctly (abeit fortuitously) and the console is
correct, thanks to a recent patch to the console code correcting an endian
bug in fbcon_putc().
Signed-off-by: Jim Hague <jim.hague@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2201, 2005-01-04 21:54:11-08:00, jim.hague@acm.org
[PATCH] pm2fb: fix big-endian (Sparc) support
A collection of changes that taken together makes the driver work correctly on
big-endian systems, specifically Sparc.
- Remove old PM2FB_BE_APERTURE define and use __BIG_ENDIAN
throughout. PM2FB_BE_APERTURE wasn't defined on Sparc; this
was incorrect.
- Replace colour mode magic numbers with suitable constants,
and tidy colour mode handling. Use BGR not RGB at 24bit on
big-endian.
- Replace aperture magic numbers with constants. Rearrange code to
emphasise second aperture is not used. Add short explanations
of aperture settings for big endian.
- Update comments to note that the driver now works on Sparc.
- Revisit 32bit depth colour offsets and ensure transp is set.
Signed-off-by: Jim Hague <jim.hague@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2200, 2005-01-04 21:53:58-08:00, jim.hague@acm.org
[PATCH] pm2fb: use modedb in modules
- modedb is now available in modules.
Signed-off-by: Jim Hague <jim.hague@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2199, 2005-01-04 21:53:45-08:00, jim.hague@acm.org
[PATCH] pm2fb: save/restore memory config
- From 2.4 driver: Save memory config registers at init and restore after card
reset. Reset card on mode change.
Signed-off-by: Jim Hague <jim.hague@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2198, 2005-01-04 21:53:32-08:00, jim.hague@acm.org
[PATCH] pm2fb: module parameters and module-conditional code
- Update MODULE_PARM to module_param.
- Omit some non-module code from module builds and vice-versa.
Signed-off-by: Jim Hague <jim.hague@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2197, 2005-01-04 21:53:19-08:00, kraxel@bytesex.org
[PATCH] fbdev: sysfs fix
Make sure the fbdev sysfs class is registered before all drivers, otherwise
some symlinks are missing.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2196, 2005-01-04 21:53:06-08:00, thomas@winischhofer.net
[PATCH] fbdev: SiS framebuffer driver update 1.7.17
attached is an update for sisfb, lifting it up to version 1.7.17.
It contains all changes done behind my back by other people (viro,
torvalds, adaplas) in the meantime. Furthermore,
- all remaining sparse warnings were fixed (mainly caused by the ROM code)
- problems with very old and brand new BIOSes from SiS were fixed,
- LCD setup was simplified, allowing more display modes than before,
- UMC/charter bridge type handling was added,
- a code clean-up was performed, the new FB_BLANK-flags were taken over,
VBLANK status info was corrected, etc.
Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2195, 2005-01-04 21:52:52-08:00, wli@holomorphy.com
[PATCH] invalidate_inodes speedup
With Kirill Korotaev <kk@sw.ru>
invalidate_inodes() can take a large amount of time searching the inode
lists for inodes which belong to this fs. Add a separate list for this
search.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2194, 2005-01-04 21:52:38-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: clear the recall_lru of delegations at shutdown
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2193, 2005-01-04 21:52:26-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: add to the laundromat service for delegations.
Walk the recall_lru and reap unused or timed-out delegations.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2192, 2005-01-04 21:52:12-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: add the DELEGRETURN operation.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2191, 2005-01-04 21:51:59-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: add checking of delegation stateids to nfs4_preprocess_stateid_op.
Call release_delegation on delegreturn (DELEG_RET).
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2190, 2005-01-04 21:51:46-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: check for openmode violations given a delegation stateid.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2189, 2005-01-04 21:51:33-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: remove unnecessary stateowner existence check.
At OPEN:
Check for delegations in the process of being recalled.
Attempt to hand out a delegation.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2188, 2005-01-04 21:51:20-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: attempt to hand out a delegation
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2187, 2005-01-04 21:51:07-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: helper functions for deciding to grant a delegation.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2186, 2005-01-04 21:50:54-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: kernel thread for delegation callback
Any task can call break_lease or time_out_leases
on a v4 delegated file which results in a recall callback rpc sent to the
NFSv4 client holding the delegation, and/or the FL_LEASE to be removed.
Spawn a kernel thread to perform the callback.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2185, 2005-01-04 21:50:42-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: delegation recall callback rpc.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2184, 2005-01-04 21:50:29-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: delay nfsd_colse for delegations until reaping
Because nfsd_close() can call locks_remove_flock() which removes leases,
delay nfsd_close() for delegations until the delegation is reaped.
Don't release an nfs4_file struct with delegations.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2183, 2005-01-04 21:50:16-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: changes to expire_client
... to shutdown the rpc callback client and remove all
client associated delegations
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2182, 2005-01-04 21:50:03-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: add the delegation release and free functions
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2181, 2005-01-04 21:49:50-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: find a delegation for a file given a stateid.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2180, 2005-01-04 21:49:38-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: allocate and initialize the delegation structure.
Declare and initialize the recall_lru list.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2179, 2005-01-04 21:49:25-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: add structures for delegation support
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2178, 2005-01-04 21:49:12-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: get rid of the special delegation_stateid_t, use the existing stateid_t.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2177, 2005-01-04 21:48:59-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: check for existence of file_lock parameter inside of the kernel lock.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2176, 2005-01-04 21:48:47-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: probe the callback path upon a successful setclientid_confirm
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2175, 2005-01-04 21:48:34-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: preparation for delegation: client callback probe
client callback rpc to probe the callback
channel on setclientid with a null request.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2174, 2005-01-04 21:48:20-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: count the nfs4_client structure usage
... to protect the null (probe) callback asynchronous rpc's reference.
Atomically inc and set the cb_set flag.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2173, 2005-01-04 21:48:08-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: check the callback netid in gen_callback.
since we only support tcp, don't save the netinfo.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2172, 2005-01-04 21:47:55-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: move nfserr_openmode checking from nfsd_read/write into nfs4_preprocess_stateid_op() in preparation for delegation state.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2171, 2005-01-04 21:47:42-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: trivial cleanup
Trim a couple redundant comments, minor whitespace cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2170, 2005-01-04 21:47:29-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: fix dropit return
We need to handle nfserr_dropit as a special case here, since we don't
want to return it in the rdattr_error attribute.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2169, 2005-01-04 21:47:16-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: simplify control flow
Replace series of if's by a switch, remove (now unnecessary) label "out".
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2168, 2005-01-04 21:47:03-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: simplify error handling
Minor simplification of error handling in encode_dirent.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2167, 2005-01-04 21:46:50-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: move rdattr_error code to new function
Move code to encode the special rdattr_error attribute to
nfsd4_encode_rdattr_error().
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2166, 2005-01-04 21:46:37-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: simplify nfs4_encode_dirent_fattr
Make nfsd4_encode_dirent_fattr() slightly more concise.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2165, 2005-01-04 21:46:24-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: more readdir attribute encoding to new function
Move readdir attribute encoding to nfsd4_encode_dirent_fattr(), remove
the (no-longer used) error label.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2164, 2005-01-04 21:46:12-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: superfluous local variables
The local variables bmval0 and bmval1 turn out not to really help much.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2163, 2005-01-04 21:45:59-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: encode_dirent: superfluous assignment
Remove unused assignment
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2162, 2005-01-04 21:45:46-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4 encode_dirent cleanup
No sensible client is ever going to request only the RDATTR_ERROR attribute, so
there's no point optimizing for that case.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2161, 2005-01-04 21:45:32-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: use the fsid export option when returning the fsid attribute
Return the special NFSv4 pseudo filesystem fsid (0/0) in a GETATTR on an
NFSv4 pseudo filesystem node.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2160, 2005-01-04 21:45:20-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: fix fileid in readdir responses
We were reporting mounted_on fileid instead of fileid in readdir responses.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2159, 2005-01-04 21:45:08-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: rpcsec_gss: comparing pointer to 0 instead of NULL
Just noticed while fixing some other sparse-related stuff.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2158, 2005-01-04 21:44:55-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd4: fix open_downgrade decode error.
Fix open downgrade decode error.
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2157, 2005-01-04 21:44:42-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: svcrpc: share code duplicated between auth_unix and auth_null
Call a helper function from svcauth_unix_accept() and svcauth_null_accept()
instead of duplicating code.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2156, 2005-01-04 21:44:30-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: svcrpc: auth_null fixes
Fix some discrepencies between the server-side auth_null and auth_unix rpc
code: in particular, make sure we return an auth error in the auth_null case
instead of dropping when we fail to match an export entry, and make sure such
responses are encoded correctly.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2155, 2005-01-04 21:44:16-08:00, neilb@cse.unsw.edu.au
[PATCH] knfsd: nfsd_translate_wouldblocks
-EAGAIN has a special treatment in the nfsd code since it's used to indicate
that an upcall has been initiated and that a request should be dropped pending
the upcall result.
But when the break_lease functions return -EWOULDBLOCK (==-EAGAIN on most
architectures), we actually prefer to return nfserr_jukebox. So translate
-EAGAIN returns to -ETIMEDOUT (which will be translated to nfserr_jukebox).
Undo the mapping of -EWOULDBLOCK to nfserr_jukebox, since on most
architectures that has the undesireable effect of mapping -EAGAIN to
nfserr_jukebox.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2154, 2005-01-04 21:44:04-08:00, penberg@cs.helsinki.fi
[PATCH] oprofile: minor cleanups
This patch has the following cleanups to oprofile:
- Remove spurious casts
- vfree() accepts NULL pointers so remove redundant test
- The parameter for __free_cpu_buffer() is not used so merge the function
with free_cpu_buffer()
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2153, 2005-01-04 21:43:51-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: update sparc64 for api changes
oprofile sparc64 arch updates, including some internal API changes.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2152, 2005-01-04 21:43:39-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: update sh for api changes
oprofile sh arch updates, including some internal API changes.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2151, 2005-01-04 21:43:26-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: update s390 for api changes
oprofile s390 arch updates, including some internal API changes.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2150, 2005-01-04 21:43:13-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: update parisc for api changes
oprofile parisc arch updates, including some internal API changes.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2149, 2005-01-04 21:43:03-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: update ppc for api changes
oprofile ppc64 arch updates, including some internal API changes.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2148, 2005-01-04 21:42:50-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: update arm for api changes
oprofile arm arch updates, including some internal API changes.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2147, 2005-01-04 21:42:37-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: update alpha for api changes
oprofile alpha arch updates, including some internal API changes.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2146, 2005-01-04 21:42:25-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: ia64 support for oprofile stack trace sampling
oprofile ia64 arch updates, including some internal API changes and support
for stack trace sampling.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Keith Owens <kaos@melbourne.sgi.com>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2145, 2005-01-04 21:42:11-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: i386 support for stack trace sampling
oprofile i386 arch updates, including some internal API changes and support
for stack trace sampling.
(akpm: I added a nasty hack to fix the x86_64 build. However the feature is
untested on x86_64 and probably doesn't work yet).
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2144, 2005-01-04 21:41:57-08:00, gnb@sgi.com
[PATCH] oprofile: backtrace operation does not initialized
Allow stack tracing to work when sampling on timer is forced using the
timer=1 boot option. Reported by Akinobu Mita.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2143, 2005-01-04 21:41:45-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: arch-independent code for stack trace sampling
oprofile arch-independent updates, including some internal API changes and
support for stack trace sampling.
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2142, 2005-01-04 21:41:31-08:00, gnb@melbourne.sgi.com
[PATCH] oprofile: add check_user_page_readable()
Add check_user_page_readable() for kernel modules which need to follow user
space addresses but can't use get_user().
Signed-off-by: John Levon <levon@movementarian.org>
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2141, 2005-01-04 21:41:17-08:00, sds@epoch.ncsc.mil
[PATCH] SELinux: eliminate unaligned accesses by policy loading code
This patch rewrites the SELinux next_entry() function and all callers to
copy entry data from the binary policy into properly aligned buffers,
eliminating unaligned accesses. This patch is in response to a bug report
from Prarit Bhargava for SELinux and ia64, and he has confirmed that this
patch eliminates the unaligned access warnings.
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2140, 2005-01-04 21:41:04-08:00, sds@epoch.ncsc.mil
[PATCH] SELinux: add member node to selinuxfs
This patch adds a member node to selinuxfs to export the security_member_sid
interface to userspace for obtaining security polyinstantiation decisions.
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2139, 2005-01-04 21:40:51-08:00, sds@epoch.ncsc.mil
[PATCH] SELinux: enhance SELinux control of executable mappings
This patch adds new permission checks to the SELinux mmap and mprotect hooks
to enable control over the ability to make executable a mapping that can
contain data not covered by the existing file-based permission checks.
The task->self execmem permission controls the ability to create an executable
anonymous mapping or a writable executable private file mapping. The
task->file execmod permission controls the ability to make executable a
previously written private file mapping, e.g. for text relocations. Thanks
to Roland McGrath for input and feedback on earlier versions of this patch.
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2138, 2005-01-04 21:40:39-08:00, sds@epoch.ncsc.mil
[PATCH] SELinux: add dynamic context transition support to SELinux
This patch for adds dynamic context transition support to SELinux via writes
to the existing /proc/pid/attr/current interface.
Previously, SELinux only supported exec-based context transitions. This
functionality allows privileged applications to apply privilege bracketing
without necessarily being refactored to an exec-based model (although such a
model has advantages in least privilege and isolation).
A process must have setcurrent permission to use this mechanism at all, and
the dyntransition permission must be granted between the old and new security
contexts. Multi-threaded processes are not allowed to use this operation, as
it will yield an inconsistency among the security contexts of the threads
sharing the same mm.
Ptrace permission is revalidated against the new context if the process is
being ptraced.
Author: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2137, 2005-01-04 21:40:25-08:00, sds@epoch.ncsc.mil
[PATCH] SELinux: audit task comm if exe cannot be determined
This patch ensures that the comm is included in the audit message if avc_audit
is unable to determine the exe due to the mmap_sem being held. This is
helpful in tracking down the causes of permission denials that occur in the
mmap/mprotect hooks.
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2136, 2005-01-04 21:40:12-08:00, sds@epoch.ncsc.mil
[PATCH] SELinux: update selinux_task_setscheduler
This patch updates the selinux_task_setscheduler hook function to use the
standard helper for task permission checks since it is now safe to audit from
this hook (due to the upstream change to setscheduler() to not hold the
runqueue lock during the security hook call).
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2135, 2005-01-04 21:39:59-08:00, sds@epoch.ncsc.mil
[PATCH] SELinux: regenerate SELinux module headers
This patch regenerates the SELinux module headers to use a new format and
updates their use by the AVC.
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2134, 2005-01-04 21:39:47-08:00, jmorris@redhat.com
[PATCH] SELinux scalability: AVC statistics and tuning
This patch adds an selinuxfs based API to the AVC, to allow monitoring of
the cache, and tuning of the cache size. The latter is mediated via the
new setsecparam permission.
AVC statistics may be monitored via the avcstat utility:
http://people.redhat.com/jmorris/selinux/perf/avcstat.c
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2133, 2005-01-04 21:39:34-08:00, jmorris@redhat.com
[PATCH] SELinux: atomic_dec_and_test() bug
Atomic underflow debugging in this kernel exposed a bug in the AVC RCU
code, fix below. The effect of this bug would be delayed node reclamation.
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2132, 2005-01-04 21:39:21-08:00, jmorris@redhat.com
[PATCH] SELinux scalability: convert AVC to RCU
The following patch improves the scalability of SELinux by replacing the
global avc_lock with an RCU based scheme by Kaigai Kohei. The size of the
cache is made tunable, to allow administrators to tune systems for different
workloads, while statistics are exported via selinuxfs to allow AVC
performance to be monitored at a low level.
AVC nodes are also allocated now via a slab cache, and AVC references have
been removed from the code.
This code has been extensively tested and benchmarked (see benchmark results
below). Baseline performance is not improved, although it is clear that
dramatic scalability improvements are achieved.
Baseline performance and networking scalability are areas where work is
ongoing (in particular, we need to add caching of some network security
objects so that we don't fallback to policy database lookups on each
permission call).
Benchmark results:
===============================================================================================
System: 4 node 16-way IA64 NUMA
- 'Stream' is based on http://www.cs.virginia.edu/stream/ , HPC memory bandwidth test,
higher result is better.
- Hackbench: scheduler scalability benchmark by Rusty, lower is better.
Standard kernel:
2.6.9-1.648_EL SELINUX=0 : Stream 6159.987MB/s HackBench 53.144
2.6.9-1.648_EL SELINUX=1 : Stream 5872.529MB/s HackBench 1043.132
Kernel with RCU/AVC patches:
2.6.9-1.689_avcrcu.root SELINUX=0 : Stream 8829.647MB/s HackBench 53.976
2.6.9-1.689_avcrcu.root SELINUX=1 : Stream 8817.117MB/s HackBench 50.975
===============================================================================================
System: 8-way PIII 900Mhz Xeon with 9GB RAM
Fileystem: ext2 for all testing.
Notes:
AVC was reset before tests, so avc was flushed.
System was run in enforcing mode.
Key:
std-nolsm: standard kernel with LSM disabled
std-lsmcap: standard kernel with LSM enabled, capabilities LSM
std-sel-strict: standard kernel with SELinux enabled, capabilities secondary LSM
rcu-sel-strict: as above with RCU & AVC stats patches
ChangeSet@1.2131, 2005-01-04 21:39:08-08:00, jmorris@redhat.com
[PATCH] SELinux scalability: add spin_trylock_irq and spin_trylock_irqsave
This patch from Kaigai Kohei <kaigai@ak.jp.nec.com> adds irq and irqsave
trylock spinlock variants for use by the SELinux AVC RCU patch.
Signed-off-by: Kaigai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2130, 2005-01-04 21:38:55-08:00, oleg@tv-sign.ru
[PATCH] uninline/kill __exit_mm()
__exit_mm() is an inlined version of exit_mm(). This patch unifies them.
Saves 356 byte in exit.o.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2129, 2005-01-04 21:38:42-08:00, roland@redhat.com
[PATCH] task_struct.exit_state usage
I just did a quick audit of the use of exit_state and the EXIT_* bit
macros. I guess I didn't really review these changes very closely when you
did them originally. :-(
I found several places that seem like lossy cases of query-replace without
enough thought about the code. Linus has previously said the >= tests
ought to be & tests instead. But for exit_state, it can only ever be 0,
EXIT_DEAD, or EXIT_ZOMBIE--so a nonzero test is actually the same as
testing & (EXIT_DEAD|EXIT_ZOMBIE), and maybe its code is a tiny bit better.
The case like in choose_new_parent is just confusing, to have the
always-false test for EXIT_* bits in ->state there too.
The two cases in wants_signal and do_process_times are actual regressions
that will give us back old bugs in race conditions. These places had
s/TASK/EXIT/ but not s/state/exit_state/, and now there tests for exiting
tasks are now wrong and never catching them. I take it back: there is no
regression in wants_signal in practice I think, because of the PF_EXITING
test that makes the EXIT_* state checks superfluous anyway. So that is
just another cosmetic case of confusing code. But in do_process_times,
there is that SIGXCPU-while-exiting race condition back again.
Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2128, 2005-01-04 21:38:28-08:00, roland@redhat.com
[PATCH] move waitchld_exit from task_struct to signal_struct
There is really no point in each task_struct having its own waitchld_exit.
In the only use of it, the waitchld_exit of each thread in a group gets
woken up at the same time. So, there might as well just be one wait queue
for the whole thread group. This patch does that by moving the field from
task_struct to signal_struct. It should have no effect on the behavior,
but saves a little work and a little storage in the multithreaded case.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2127, 2005-01-04 21:38:15-08:00, roland@redhat.com
[PATCH] fix ptracer death race yielding bogus BUG_ON
There is a BUG_ON in ptrace_stop that hits if the thread is not ptraced.
However, there is no synchronization between a thread deciding to do a
ptrace stop and so going here, and its ptracer dying and so detaching from
it and clearing its ->ptrace field.
The RHEL3 2.4-based kernel has a backport of a slightly older version of
the 2.6 signals code, which has a different but equivalent BUG_ON. This
actually bit users in practice (when the debugger dies), but was
exceedingly difficult to reproduce in contrived circumstances. We moved
forward in RHEL3 just by removing the BUG_ON, and that fixed the real user
problems even though I was never able to reproduce the scenario myself.
So, to my knowledge this scenario has never actually been seen in practice
under 2.6. But it's plain to see from the code that it is indeed possible.
This patch removes that BUG_ON, but also goes further and tries to handle
this case more gracefully than simply avoiding the crash. By removing the
BUG_ON alone, it becomes possible for the real parent of a process to see
spurious SIGCHLD notifications intended for the debugger that has just
died, and have its child wind up stopped unexpectedly. This patch avoids
that possibility by detecting the case when we are about to do the ptrace
stop but our ptracer has gone away, and simply eliding that ptrace stop
altogether as if we hadn't been ptraced when we hit the interesting event
(signal or ptrace_notify call for syscall tracing or something like that).
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2126, 2005-01-04 21:38:01-08:00, roland@redhat.com
[PATCH] move group_exit flag into signal_struct.flags word
After my last change, there are plenty of unused bits available in the new
flags word in signal_struct. This patch moves the `group_exit' flag into
one of those bits, saving a word in signal_struct.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2125, 2005-01-04 21:37:48-08:00, roland@redhat.com
[PATCH] fix stop signal race
The `sig_avoid_stop_race' checks fail to catch a related race scenario that
can happen. I don't think this has been seen in nature, but it could
happen in the same sorts of situations where the observed problems come up
that those checks work around. This patch takes a different approach to
catching this race condition. The new approach plugs the hole, and I think
is also cleaner.
The issue is a race between one CPU processing a stop signal while another
CPU processes a SIGCONT or SIGKILL. There is a window in stop-signal
processing where the siglock must be released. If a SIGCONT or SIGKILL
comes along here on another CPU, then the stop signal in the midst of being
processed needs to be discarded rather than having the stop take place
after the SIGCONT or SIGKILL has been generated. The existing workaround
checks for this case explicitly by looking for a pending SIGCONT or SIGKILL
after reacquiring the lock.
However, there is another problem related to the same race issue. In the
window where the processing of the stop signal has released the siglock,
the stop signal is not represented in the pending set any more, but it is
still "pending" and not "delivered" in POSIX terms. The SIGCONT coming in
this window is required to clear all pending stop signals. But, if a stop
signal has been dequeued but not yet processed, the SIGCONT generation will
fail to clear it (in handle_stop_signal). Likewise, a SIGKILL coming here
should prevent the stop processing and make the thread die immediately
instead. The `sig_avoid_stop_race' code checks for this by examining the
pending set to see if SIGCONT or SIGKILL is in it. But this fails to
handle the case where another CPU running another thread in the same
process has already dequeued the signal (so it no longer can be found in
the pending set). We must catch this as well, so that the same problems do
not arise when another thread on another CPU acted real fast.
I've fixed this dumping the `sig_avoid_stop_race' kludge in favor of a
little explicit bookkeeping. Now, dequeuing any stop signal sets a flag
saying that a pending stop signal has been taken on by some CPU since the
last time all pending stop signals were cleared due to SIGCONT/SIGKILL.
The processing of stop signals checks the flag after the window where it
released the lock, and abandons the signal the flag has been cleared. The
code that clears pending stop signals on SIGCONT generation also clears
this flag. The various places that are trying to ensure the process dies
quickly (SIGKILL or other unhandled signals) also clear the flag. I've
made this a general flags word in signal_struct, and replaced the
stop_state field with flag bits in this word.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2124, 2005-01-04 21:37:34-08:00, coywolf@gmail.com
[PATCH] remove redundant sys_delete_module()
Peter Chubb recently split out a standalone sys_ni.c file for the not
implemented syscalls. This patch removes the redundant sys_delete_module()
in module.c.
Signed-off-by: Coywolf Qi Hunt <coywolf@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2123, 2005-01-04 21:37:20-08:00, oleg@tv-sign.ru
[PATCH] fix conflicting cpu_idle() declarations
cpu_idle() is referenced from generic code (init/main.c). It is
declared/defined in
init/main.c: void cpu_idle(void)
i386/kernel/process.c void cpu_idle(void)
i386/kernel/smpboot.c: int cpu_idle(void)
i386/mach-voyager/voyager_smp.c: int cpu_idle(void)
ppc/kernel/idle.c: int cpu_idle(void)
ppc/kernel/smp.c: int cpu_idle(void *unused)
ppc64/kernel/idle.c: int cpu_idle(void)
ppc64/kernel/smp.c: int cpu_idle(void *unused)
sparc/kernel/process.c: int cpu_idle(void)
sparc64/kernel/process.c: int cpu_idle(void)
sh/kernel/process.c: void cpu_idle(void *unused)
sh/kernel/smp.c: int cpu_idle(void *unused)
ia64/kernel/smpboot.c: int cpu_idle(void)
ia64/kernel/process.c: void cpu_idle(void *unused)
sh64/kernel/process.c: void cpu_idle(void *unused)
s390/kernel/process.c: int cpu_idle(void)
s390/kernel/smp.c: int cpu_idle(void * unused)
m32r/kernel/process.c: void cpu_idle(void)
m32r/kernel/smpboot.c int cpu_idle(void)
Other arches beleive that cpu_idle is void(void).
This patch puts 'void cpu_idle(void)' in include/linux/smp.h
and fixes conflicting definitions.
Also removes now unneeded declarations in x86_64, alpha, parisc.
Only i386 part is tested.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2122, 2005-01-04 21:37:07-08:00, james4765@verizon.net
[PATCH] lcd: fix memory leak, code cleanup
This patch addresses the following issues:
- Fix log-spamming and cryptic error messages, and add KERN_ constants.
- Convert some ints to unsigned ints.
- Add checks for CAP_SYS_ADMIN for FLASH_Burn and FLASH_Erase ioctls.
- Identify use of global variable.
- Fix memory leak in FLASH_Burn ioctl.
- Fix error return codes in lcd_ioctl().
- Move variable "index" in lcd_ioctl() to smaller scope to reduce memory
usage.
- Convert cli()/sti() to spin_lock_irqsave()/spin_unlock_irqrestore().
Fix legibility issues in FLASH_Burn ioctl.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2121, 2005-01-04 21:36:54-08:00, werner@almesberger.net
[PATCH] prio_tree: move general code from mm/ to lib/
Last but not least, move the general prio_tree code from mm/ to lib/. This
patch also duplicates some macros, which are used in the VMA code for
debugging purposes, so we can't properly separate them yet.
Note that this patch conflicts with a patch in 2.6.10-rc3-mm1
(frv-better-mmap-support-in-uclinux.patch), which removes mm/prio_tree in
systems without an MMU. Not making that other patch provide a dummy for
prio_tree_init should resolve the conflict. (That's just from reading the
patch - I haven't actually tried this.)
Signed-off-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2120, 2005-01-04 21:36:41-08:00, werner@almesberger.net
[PATCH] prio_tree: generalization
Export prio_tree functions such that they can be used by other subsystems than
only VMAs. Also adds a mode to prio_tree to use it with keys explicitly
included in the prio_tree meta-data.
The plan is to also consider converting VMAs to use explicit keys, so that the
old "raw" mode can be removed.
Signed-off-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2119, 2005-01-04 21:36:27-08:00, werner@almesberger.net
[PATCH] prio_tree: roll call to prio_tree_first into prio_tree_next
Allow prio_tree_next to be used as the only function for tree traversal,
similar to how vma_prio_tree_next works.
This patch isn't needed for the generalization, but since it affects the API,
it's better to include it first.
Signed-off-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2118, 2005-01-04 21:36:15-08:00, akpm@osdl.org
[PATCH] msync(): set PF_SYNCWRITE
Pass the "we are doing synchronous writes" hint down from msync().
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2117, 2005-01-04 21:36:02-08:00, nanhai.zou@intel.com
[PATCH] compat: sigtimedwait
- Merge sys32_rt_sigtimedwait function in X86_64, IA64, PPC64, MIPS,
SPARC64, S390 32 bit layer into 1 compat_rt_sigtimedwait function. It will
also fix a bug of copy wrong information to 32 bit userspace siginfo
structure on X86_64, IA64 and SPARC64 when calling sigtimedwait on 32 bit
layer.
- Change all name the of siginfo_t32 structure in X86_64, IA64, MIPS,
SPARC64 and S390 to the name compat_siginfo_t as used in PPC64.
- Patch introduced a macro __COMPAT_ENDIAN_SWAP__ in
include/asm-mips/compat.h when MIPS kernel is compiled in little-endian
mode. This macro is used to do byte swapping in function
sigset_from_compat.
- This patch is only tested on X86_64 and IA_64.
Signed-off-by: Zou Nan hai <Nanhai.zou@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2116, 2005-01-04 21:35:46-08:00, hch@lst.de
[PATCH] remove dead ext3_put_inode prototype
ext3_put_inode has been removed a while ago.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2115, 2005-01-04 21:35:33-08:00, hch@lst.de
[PATCH] udf: fix reservation discarding
UDF discards file preallocations on every ->put_inode which is totally
bogus. It already discards them in ->release which makes sense for normal
writes, so the only additional discard is in ->clear_inode so we make sure
we don't leak any reservations for shared writeable mappings.
This follows similar changes to ext2 and ext3.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2114, 2005-01-04 21:35:19-08:00, hch@lst.de
[PATCH] udf: simplify udf_iget, fix race
udf_iget calls __udf_read_inode after the inode has been unlocked and other
threads could access it. Switching to iget_locked() fixes this race and
nicely simplifies the code.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2113, 2005-01-04 21:35:06-08:00, zwane@arm.linux.org.uk
[PATCH] Remove RCU abuse in cpu_idle()
Introduce cpu_idle_wait() on architectures requiring modification of
pm_idle from modules, this will ensure that all processors have updated
their cached values of pm_idle upon exit. This patch is to address the bug
report at http://bugme.osdl.org/show_bug.cgi?id=1716 and replaces the
current code fix which is in violation of normal RCU usage as pointed out
by Stephen, Dipankar and Paul.
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2112, 2005-01-04 21:34:52-08:00, mason@suse.com
[PATCH] __getblk_slow can loop forever when pages are partially mapped
When a block device is accessed via read/write, it is possible for some of
the buffers on a page to be mapped and others not. __getblk and friends
assume this can't happen, and can end up looping forever when pages have
some unmapped buffers. Picture:
lseek(/dev/xxx, 2048, SEEK_SET)
write(/dev/xxx, 2048 bytes)
Assuming the block size is 1k, page 0 has 4 buffers, two are mapped by
__block_prepare_write and two are not. Next, another process triggers
getblk(/dev/xxx, blocknr = 0);
__getblk_slow will loop forever. __find_get_block fails because the buffer
isn't mapped. grow_dev_page does nothing because there are buffers on the
page with the correct size. madhav@veritas.com and others at Veritas
tracked this down.
The fix below has two parts. First, it changes __find_get_block to avoid
the buffer_error warnings when it finds unmapped buffers on the page.
Second, it changes grow_dev_page to map the buffers on the page by calling
init_page_buffers. init_page_buffers is changed so we don't stomp on
uptodate bits for the buffers.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2111, 2005-01-04 21:34:39-08:00, kaneshige.kenji@jp.fujitsu.com
[PATCH] IRQ resource deallocation: ia64
This is an ia64 portion of IRQ resource deallocation. It implements
pcibios_disable_device() and acpi_unregister_gsi() for ia64.
o acpi_unregister_gsi()
Summary of changes for implementing this interface:
- Add new function iosapic_unregister_intr() into
arch/ia64/kernel/iosapic.c. This function frees an interrupt
vector and related data structures.
- Add new function free_irq_vector() into
arch/ia64/kernel/irq_ia64.c. This frees an unused vector.
- Change assign_irq_vector() to be able to support
free_irq_vector().
o pcibios_disable_device()
This calls acpi_pci_irq_disable() to deallocate IRQ resources.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2110, 2005-01-04 21:34:25-08:00, kaneshige.kenji@jp.fujitsu.com
[PATCH] IRQ resource deallocation: ACPI
Architecture dependent IRQ resources such as interrupt vector for PCI
devices are allocated at pci_enable_device() time on i386, x86-64 and
ia64 platform. Today, however, these IRQ resources are never
deallocated even if they are no longer used. The following set of
patches adds supports to deallocate IRQ resources at
pci_disable_device() time.
The motivation of the set of patches is as follows:
- IRQ resources such as interrupt vectors should be freed if they
are no longer used because the amount of these resources are
limited. By deallocating IRQ resources, we can recycle them.
- I think some hardwares will support hot-pluggable I/O units with
I/O xAPICs in the near future. So I/O xAPIC hot-plug support by
OS will be needed soon. IRQ resouces deallocation will be one of
the most important stuff for I/O xAPIC hot-plug.
For now, the following set of patches has ia64 implementation only.
i386 and x86_64 implementations are TBD.
This patch is ACPI portion of IRQ deallocation. This patch defines the
following new interface. The implementation of this interface depends
on each platform.
o void acpi_unregister_gsi(u32 gsi)
This is a opposite portion of acpi_register_gsi(). This has a
responsibility for deallocating IRQ resources associated with
the specified GSI number.
We need to consider the case of shared interrupt. In the case
of shared interrupt, acpi_register_gsi() is called multiple
times for one gsi. That is, registrations and unregistrations
can be nested.
This function undoes the effect of one call to
acpi_register_gsi(). If this matches the last registration,
IRQ resources associated with the specified GSI number are
freed.
This patch also adds the following new function.
o void acpi_pci_irq_disable (struct pci_dev *dev)
This function is a opposite portion of
acpi_pci_enable_irq(). It clears the device's linux IRQ number
and calls acpi_unregister_gsi() to deallocate IRQ resources.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2109, 2005-01-04 21:34:13-08:00, manfred@colorfullife.com
[PATCH] fix missing wakeup in ipc/sem
My patch that removed the spin_lock calls from the tail of sys_semtimedop
introduced a bug:
Before my patch was merged, every operation that altered an array called
update_queue. That call woke up threads that were waiting until a
semaphore value becomes 0. I've accidentially removed that call.
The attached patch fixes that by modifying update_queue: the function now
loops internally and wakes up all threads. The patch also removes
update_queue calls from the error path of sys_semtimedop: failed operations
do not modify the array, no need to rescan the list of waiting threads.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2108, 2005-01-04 21:34:00-08:00, agruen@suse.de
[PATCH] Ext[23]: apply umask to symlinks with ACLs configured out
Keith Young <stripyd@stripydog.com> has reported that when ACLs are not
compiled in, the default implementation of ext[23]_init_acl applies the
umask to all new files, including symlinks, which is wrong. In this case
the VFS already takes care of applying the umask when needed, so ext2 and
ext3 need not bother about it. Remove the superfluous statements.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2107, 2005-01-04 21:33:47-08:00, akpm@osdl.org
[PATCH] get_blkdev_list() cleanup
- Move prototype to genhd.h
- It is only needed for /proc
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2106, 2005-01-04 21:33:34-08:00, sfr@canb.auug.org.au
[PATCH] noone uses HAVE_ARCH_SI_CODES or HAVE_ARCH_SIGEVENT_T
Since asm-generic/siginfo.h was created, the architectures have been slowly
fixed/modified until noone uses HAVE_ARCH_SI_CODES or HAVE_ARCH_SIGEVENT_T
any more, so this patch removes the checks for them.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2105, 2005-01-04 21:33:21-08:00, franz_pletz@t-online.de
[PATCH] loop device resursion avoidance
With Andries Brouwer <Andries.Brouwer@cwi.nl>
Fix various recursion scenarios wherein it was possible to mount a loop
device on itself, either directly or via intermediate loops devices.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2104, 2005-01-04 21:33:09-08:00, penberg@cs.helsinki.fi
[PATCH] noop iosched: remove unused includes
This patch removes unused includes from drivers/block/noop-iosched.c.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2103, 2005-01-04 21:32:56-08:00, penberg@cs.helsinki.fi
[PATCH] noop iosched: make code static
This patch makes code static in drivers/block/noop-iosched.c and adds
__init and __exit for module initialization and cleanup functions.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2102, 2005-01-04 21:32:43-08:00, rddunlap@osdl.org
[PATCH] cpumask: range check before using value
When setting the 'cpu_isolated_map' mask, check that the user input value
is valid (in range 0 .. NR_CPUS - 1). Also fix up kernel-parameters.txt
for this parameter.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2101, 2005-01-04 21:32:30-08:00, zwane@holomorphy.com
[PATCH] fix alt-sysrq deadlock
__handle_sysrq was modified to do a spin_lock_irqsave so we were entering
smp_send_stop with interrupts. So reenable interrupts to prevent the
possible smp_call_function() deadlock.
(It's still deadlocky if the sysrq handler is against called via an
interrupt from a different device, but that seems unlikely).
Signed-off-by: Zwane Mwaikambo <zwane@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2100, 2005-01-04 21:32:17-08:00, pmeda@akamai.com
[PATCH] Add PR_GET_NAME
A while back we added the PR_SET_NAME prctl, but no PR_GET_NAME. I guess
we should add this, if only to enable testing of PR_SET_NAME.
Signed-off-by: Prasanna Meda <pmeda@akamai.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2099, 2005-01-04 21:32:05-08:00, rddunlap@osdl.org
[PATCH] panic_timeout: move to kernel.h
Move 'panic_timeout' to linux/kernel.h.
ipmi_watchdog.c wanted to know why panic_timeout isn't in some header file.
However, ipmi_watchdog.c doesn't even use it, so that reference was
deleted. Other references now use kernel.h instead of straight extern int.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2098, 2005-01-04 21:31:50-08:00, Matt_Domsch@dell.com
[PATCH] EDD: add edd=off and edd=skipmbr options
EDD: add edd=off and edd=skipmbr command line options
New command line options
edd=off (or edd=of)
edd=skipmbr (or edd=sk)
runtime options for disabling all EDD int13 calls completely, or for
skipping the int13 READ SECTOR calls, respectively.
These are provided to allow Linux distributions to include CONFIG_EDD=m, yet
allow end-users to disable parts of EDD which may not work well with their
system's BIOS.
I incorporated comments from Randy Dunlap, and got an ack from Andi Kleen.
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2097, 2005-01-04 21:31:38-08:00, jamagallon@able.es
[PATCH] make gconfig work with gtk-2.4
I need this to make gconfig work under gtk-2.4. Without this, it just
coredumps. There is some problem with pixmap creation/usage from XPM in
the way it is done in gconf, so I just added some stock icons. It is even
prettier..;)
Could someone test this still works on gtk-2.0 or 2.2 ?
Changes:
- change the wiget class 'button' in glade files to something known to
glade (GtkToolButton)
- use 'stock-id' property for toolbar buttons instead of "stock_pixmap"
- change unknown signal "pressed" to "clicked"
- remove manual setting of icons in gconf.c
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2096, 2005-01-04 21:31:25-08:00, rusty@rustcorp.com.au
[PATCH] sys_sched_setaffinity() on UP should fail for non-zero CPUs.
Return EINVAL for invalid sched_setaffinity on UP. I was a little
surprised that sys_sched_setaffinity for CPU 1 didn't fail on my UP box.
With CONFIG_SMP it would have.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2095, 2005-01-04 21:31:12-08:00, tvrtko.ursulin@sophos.com
[PATCH] smb_file_open() retval fix
Correctly propagate the return value from smb_open().
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2094, 2005-01-04 21:31:02-08:00, manfred@colorfullife.com
[PATCH] rcu: simplify quiescent state detection
Based on an initial patch from Oleg Nesterov <oleg@tv-sign.ru>
rcu_data.last_qsctr is not needed. Actually, not even a counter is needed,
just a flag that indicates that there was a quiescent state.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2093, 2005-01-04 21:30:48-08:00, manfred@colorfullife.com
[PATCH] rcu: make two internal structs static
The patch below makes two needlessly global structs static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2092, 2005-01-04 21:30:36-08:00, oleg@tv-sign.ru
[PATCH] rcu: eliminate rcu_ctrlblk.lock
rcu_ctrlblk.lock is used to read the ->cur and ->next_pending
atomically in __rcu_process_callbacks(). It can be replaced
by a couple of memory barriers.
rcu_start_batch:
rcp->next_pending = 0;
smp_wmb();
rcp->cur++;
__rcu_process_callbacks:
rdp->batch = rcp->cur + 1;
smp_rmb();
if (!rcp->next_pending)
rcu_start_batch(rcp, rsp, 1);
This way, if __rcu_process_callbacks() sees incremented ->cur value,
it must also see that ->next_pending == 0 (or rcu_start_batch() is
already in progress on another cpu).
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2091, 2005-01-04 21:30:23-08:00, bunk@stusta.de
[PATCH] remove ip2 programs
drivers/char/ip2/ contained three programs. Besides shipping programs at
this place doesn't sound like a good idea, they didn't even all compile.
The patch below removes them.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2090, 2005-01-04 21:30:08-08:00, ak@suse.de
[PATCH] Sync in core time granuality with filesystems
This patch corrects a problem that was originally added with the nanosecond
timestamps in stat patch. The problem is that some file systems don't have
enough space in their on disk inode to save nanosecond timestamps, so they
truncate the c/a/mtime to seconds when flushing an dirty node. In core the
inode would have full jiffies granuality.
This can be observed by programs as a timestamp that jumps backwards under
specific loads when an inode is flushed and then reloaded from disk.
The problem was already known when the original patch went in, but it
wasn't deemed important enough at that time. So far there has been only
one report of it causing problems. Now Tridge is worried that it will
break running Excel over samba4 because Excel seems to do very anal
timestamp checking and samba4 will supply 100ns timestamps over the
network.
This patch solves it by putting the time resolution into the superblock of
a fs and always rounding the in core timestamps to that granuality.
This also supercedes some previous ext2/3 hacks to flush the inode less
often when only the subsecond timestamp changes.
I tried to keep the overhead low, in particular it tries to keep divisions
out of fast paths as far as possible.
The patch is quite big but 99% of it is just relatively straight forward
search'n'replace in a lot of fs. Unconverted filesystems will default to a
1ns granuality, but may still show the problem if they continue to use
CURRENT_TIME. I converted all in tree fs.
One possible future extension of this would be to have two time
granualities per superblock - one that specifies the visible resolution,
and the other to specify how often timestamps should be flushed to disk,
which could be tuned with a mount option per fs (e.g. often m/atimes don't
need to be flushed every second). Would be easy to do as an addon if
someone is interested.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2089, 2005-01-04 21:29:47-08:00, schwidefsky@de.ibm.com
[PATCH] sys_stime needs a compat function
I realized that the best way to get the sys_time/sys_stime problem fixed is
to make sys_time 64 bit safe by using "time_t *" instead of "int *" and to
introduce two proper compat functions compat_sys_time and compat_sys_stime.
The prototype change of sys_time is transparent for 32 bit architectures
because both "int" and "time_t" are 32 bit. For 64 bit the type change
would be wrong but luckily no 64 bit architecture uses sys_time/sys_stime
in 64 bit mode. The patch makes the following change:
ia64 : Remove sys32_time, use compat_sys_time and
add (!!) compat_sys_stime to compat syscall table.
mips : Use compat_sys_time/compat_sys_stime in 32 bit syscall table.
Add #ifdef magic to compile sys_time/sys_stime and
compat_sys_time/compat_sys_stime only if needed.
parisc : Remove sys32_time, use compat_sys_time and compat_sys_stime.
ppc64 : remove sys32_time, ppc64_sys32_stime and ppc64_sys_stime.
Use common compat_sys_time, compat_sys_stime and sys_stime.
s390 : Use compat_sys_stime. Add #ifdef magic to compile
sys_time/sys_stime and compat_sys_time/compat_sys_stime only
if needed.
sparc64 : Use compat_sys_time/compat_Sys_stime in 32 bit syscall table.
um : Remove um_time and um_stime. Use common functions sys_time and
sys_stime. This adds a CAP_SYS_TIME check to UMs stime call.
x86_64 : Remove sys32_time. Use compat_sys_time and compat_sys_stime
in 32 bit syscall table.
The original stime bug is fixed for mips, parisc, s390, sparc64 and
x86_64. Can the arch-maintainers please take a look at this?
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Convert compat_time_t to time_t in 32 bit emulation for sys_stime and
consolidate all the different implementation of sys_time, sys_stime and
their 32-bit emulation parts.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2088, 2005-01-04 21:29:33-08:00, bunk@stusta.de
[PATCH] compile with -ffreestanding
For the kernel, it would be logical to use -ffreestanding. The kernel is
not a hosted environment with a standard C library.
The gcc option -ffreestanding is supported by both gcc 2.95 and 3.4, which
covers the whole range of currently supported compilers.
Regarding changes caused by this patch:
Andi Kleen reported:
Newer gcc rewrites sprintf(buf,"%s",str) to strcpy(buf,str) transparently.
This is only true with unit-at-a-time (disabled on i386 but enabled on
x86_64). The Linux kernel doesn't offer a standard C library, and such
transparent replacements of kernel functions with builtins are quite
fragile.
Even with -ffreestanding, it's still possilble to explicitely use a gcc
builtin if desired.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2087, 2005-01-04 21:29:20-08:00, alexn@dsv.su.se
[PATCH] Off by one in drivers/parport/probe.c
This fixes a theoretical bug indicated in:
http://bugme.osdl.org/show_bug.cgi?id=240
It prevents overflow in case the required buffer is larger than the passed
buffer. This I found to be the minimally intrusive change.
Signed-off-by: Alexander Nyberg <alexn@dsv.su.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2086, 2005-01-04 21:29:07-08:00, alex@clusterfs.com
[PATCH] ext3: support for EA in inode
1) intent of the patch is to get possibility to store EAs in the body of large
inode. it saves space and improves performance in some cases
2) the patch is quite simple: it works the same way original xattr does, but
using other storage (inode body). body has priority over separate block.
original routines (ext3_xattr_get, ext3_xattr_list, ext3_xattr_set) are
renamed to ext3_xattr_block_*. new routines that handle inode storate are
added (ext3_xattr_ibody_get, ext3_xattr_ibody_list, ext3_xattr_ibody_set).
routines ext3_xattr_get, ext3_xattr_list and ext3_xattr_set allow user to
accesss both the storages transparently
3) the change makes sense on filesystem with inode size >= 256 bytes only.
2.4 kernels don't support such a filesystems, AFAIK. 2.6 kernels do support
and ignore EAs stored in a body w/o the patch
4) debugfs and e2fsck need to be patched to deal with EAs in inode
the patch will be sent later
5) testing results:
a) Andrew Samba Master (tridge) has done successful tests
b) we've been using ea-in-inode feature in Lustre for many months
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2085, 2005-01-04 21:28:54-08:00, akpm@osdl.org
[PATCH] Reduce i_sem usage during file sync operations
We hold i_sem during the various sync() operations to prevent livelocks:
if another thread is dirtying the file, a sync() may never return.
Or at least, that used to be true when we were using the per-address_space
page lists. Since writeback has used radix tree traversal it is not possible
to livelock the sync() operations, because they only visit each page a single
time.
sync_page_range() (used by O_SYNC writes) has not been holding i_sem for quite
some time, for the above reasons.
The patch converts fsync(), fdatasync() and msync() to also not hold i_sem
during the radix-tree-based writeback.
Now, we _do_ still need to hold i_sem across the file->f_op->fsync() call,
because that is still based on a list_head walk, and is still livelockable.
But in the case of msync() I deliberately left i_sem untaken. This is because
we're currently deadlockable in msync, because mmap_sem is already held, and
mmap_sem nexts inside i_sem, due to direct-io.c.
And yes, the ranking of down_read() veruss down() does matter:
Task A Task B Task C
down_read(rwsem)
down(sem)
down_write(rwsem)
down(sem)
down_read(rwsem)
C's down_write() will cause B's down_read to block. B holds `sem', so A will
never release `rwsem'.
So the patch fixes a hard-to-hit triple-task deadlock, but adds a possible
livelock in msync(). It is possible to fix sys_msync() so that it takes i_sem
outside i_mmap_sem. Later.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2084, 2005-01-04 21:28:41-08:00, akpm@osdl.org
[PATCH] suppress might_sleep() if oopsing
We can call might_sleep() functions on the oops handling path (under do_exit).
There seem little point in emitting spurious might_sleep() warnings into the
logs after the kernel has oopsed.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2083, 2005-01-04 21:28:28-08:00, pmeda@akamai.com
[PATCH] fork: total_forks not counted under tasklist_lock
Bring the total_forks under tasklist_lock. When most of the fork code
icluding nr_threads is moved to copy_process() from do_fork() code in 2.6,
this is left out.
Althought accuracy of total_forks is not important, it would be nice to add
this. It does not involve additional cost, and the code will be cleaner if
it is grouped with nr_threads. The difference is, total_forks will
increase on fork, but nr_threads will increase on fork and decrease on the
exit.
I also moved extern decleration to sched.h from proc_misc.c.
Signed-off-by: Prasanna Meda <pmeda@akamai.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2082, 2005-01-04 21:28:15-08:00, shaohua.li@intel.com
[PATCH] time runx too fast after S3
After resume from S3, 'date' shows time run too fast.
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2081, 2005-01-04 21:28:02-08:00, colpatch@us.ibm.com
[PATCH] cpumask_t initializers
In the course of another patch I've been working on, I stumbled across
some weirdness with some of the SD_*_INIT sched_domains initializers. A
day or so of digging narrowed it down to the CPU_MASK_NONE initializer
nested inside the sched_domain initializers. The errors I got were:
kernel/sched.c:4812: error: initializer element is not constant
kernel/sched.c:4812: error: (near initialization for `sched_domain_dummy')
kernel/sched.c:4812: error: initializer element is not constant
which was this line:
static struct sched_domain sched_domain_dummy = SD_CPU_INIT;
Janis Johnson, a GCC hacker, told me the following:
ChangeSet@1.2080, 2005-01-04 21:27:49-08:00, sct@redhat.com
[PATCH] ext3: handle attempted double-delete of metadata.
This patch improves ext3's ability to deal with corruption on-disk. If we
try to delete a metadata block twice, we confuse ext3's internal revoke
error-checking, resulting in a BUG(). But this can occur in practice due
to a corrupt indirect block, so we should attempt to fail gracefully.
Downgrade the assert failure to a JH_EXPECT_BH failure, and return EIO when
it occurs.
This is easily reproduced with a sample ext3 fs image containing an inode
which references the same indirect block more than once. Deleting that
inode will BUG() an unfixed kernel with:
Assertion failure in journal_revoke() at fs/jbd/revoke.c:379:
"!buffer_revoked(bh)"
With the fix, ext3 recovers gracefully.
Signed-off-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2079, 2005-01-04 21:27:36-08:00, sct@redhat.com
[PATCH] ext3: handle attempted delete of bitmap blocks.
This patch improves ext3's ability to deal with corruption on-disk. If we
ever get a corrupt inode or indirect block, then an attempt to delete it
can end up trying to remove any block on the fs, including bitmap blocks.
This can cause ext3 to assert-fail as we end up trying to do an ext3_forget
on a buffer with b_committed_data set.
The fix is to downgrade this to an IO error and journal abort, so that we
take the filesystem readonly but don't bring down the whole kernel.
Make J_EXPECT_JH() return a value so it can be easily tested and yet still
retained as an assert failure if we build ext3 with full internal debugging
enabled. Make journal_forget() return an error code so that in this case
the error can be passed up to the caller.
This is easily reproduced with a sample ext3 fs image containing an inode
whose direct and indirect blocks refer to a block bitmap block. Allocating
new blocks and then deleting that inode will BUG() with:
Assertion failure in journal_forget() at fs/jbd/transaction.c:1228:
"!jh->b_committed_data"
With the fix, ext3 recovers gracefully.
Signed-off-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2078, 2005-01-04 21:27:23-08:00, sct@redhat.com
[PATCH] ext3: cleanup handling of aborted transactions.
This patch improves ext3's error logging when we encounter an on-disk
corruption. Previously, a transaction (such as a truncate) which encountered
many corruptions (eg. a single highly-corrupt indirect block) would emit
copious "aborting transaction" errors to the log.
Even worse, encountering an aborted journal can count as such an error,
leading to a flood of spurious "aborting transaction: Journal has aborted"
errors.
With the fix, only emit that message on the first error. The patch also
restores a missing \n in that printk path.
Signed-off-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2077, 2005-01-04 21:27:10-08:00, bunk@stusta.de
[PATCH] kill blk.h
All blk.h users were converted in 2.5, and at the same time blk.h began
giving a warning.
The patch below removes this obsolete file.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2076, 2005-01-04 21:26:58-08:00, minyard@acm.org
[PATCH] Cleanups for the IPMI driver
This patch removes some unneeded cruft that Adrian found, and also turns
off the shutdown of the timer when removing the module. Since the timer is
shutdown when the driver is closed (unless no way out is specified) this is
unnecessary and defeats the no way out option.
- remove some completely unused code
- make some needlessly global code static
- removal of some EXPORT_SYMBOL'ed code with zero users.
- Removal of the timer shutdown on module removal
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2075, 2005-01-04 21:26:45-08:00, holt@sgi.com
[PATCH] Hold BKL for shorter period in generic_shutdown_super().
Testing revealed long pauses of the entire system while autofs initiated
umounts as a result of timing out the mounts.
It was noticed that during a umount, the BKL is held while scanning the
inode_list and removing and inodes that are candidates. This patch moves
locking until after the first pass had gone through the inode_list.
Testing revelead that on an ia64 machine with a filesystem that had 8.4
Million inodes, there were no observable pauses during the umount. This
was down from over 4 seconds without this patch.
Signed-Off-By: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2074, 2005-01-04 21:26:32-08:00, hch@lst.de
[PATCH] remove unused irq_cpustat fields
The only common field in irq_cpustat is __softirq_pending, i386 and ppc
have some of their own.
Remove all unused obsolete fields from various architectures.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2073, 2005-01-04 21:26:18-08:00, hch@lst.de
[PATCH] move irq_enter and irq_exit to common code
This code is the same for all architectures with the following invariants:
- arm gurantees irqs are disabled when calling irq_exit so it can call
__do_softirq directly instead of do_softirq
- arm26 is totally broken for about half a year, I didn't care for it
- some architectures use softirq_pending(smp_processor_id()) instead of
local_softirq_pending, but they always evaluate to the same
This patch moves the out of line irq_exit implementation from
kernel/irq/handle.c which depends on CONFIG_GENERIC_HARDIRQS to
kernel/softirq.c which is always compiled, tweaks it for the arm special
case and moves the irq_enter/irq_exit/nmi_enter/nmi_exit bits from
asm-*/hardirq.h to linux/hardirq.h
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2072, 2005-01-04 21:26:05-08:00, rddunlap@osdl.org
[PATCH] handle quoted module parameters
Fix module parameter quote handling.
Module parameter strings (with spaces) are quoted like so:
"modprm=this test"
and not like this:
modprm="this test"
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2071, 2005-01-04 21:25:52-08:00, dev@sw.ru
[PATCH] 4/4GB: Incorrect bound check in do_getname()
This patch fixes incorrect address range check in do_getname().
Theoretically this can lead to do_getname() failure on kernel address space
string on the TASK_SIZE boundary addresses when 4GB split is ON.
(akpm: I don't see why this check exists at all, actually. afaict the only
effect of removing it is that we'll then generate -EFAULT on a
non-null-terminated pathname which ends exactly at TASK_SIZE).
Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2070, 2005-01-04 21:25:39-08:00, jlan@engr.sgi.com
[PATCH] enhanced Memory accounting data collection
This patch is to offer common accounting data collection method at memory
usage for various accounting packages including BSD accounting, ELSA, CSA
and any other acct packages that use a common layer of data collection.
New struct fields are added to mm_struct to save high watermarks of rss
usage as well as virtual memory usage.
New struct fields are added to task_struct to collect accumulated rss usage
and vm usages.
These data are collected on per process basis.
Signed-off-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2069, 2005-01-04 21:25:25-08:00, jlan@engr.sgi.com
[PATCH] enhanced I/O accounting data patch
This patch is to offer common accounting data collection method at I/O for
various accounting packages including BSD accounting, ELSA, CSA and any
other acct packages that use a common layer of data collection.
Patch is made to fs/read_write.c to collect per process data on character
read/written in bytes and number of read/write syscalls made.
New struct fields are added to task_struct to store the data.
These data are collected on per process basis.
Signed-off-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2068, 2005-01-04 21:25:12-08:00, dhowells@redhat.com
[PATCH] Cross-reference nommu VMAs with mappings
The attached patch includes prio-tree support and adds cross-referencing of
VMAs with address spaces back in, as is done under normal MMU Linux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2067, 2005-01-04 21:24:59-08:00, dhowells@redhat.com
[PATCH] Permit nommu MAP_SHARED of memory backed files
The attached patch applies some further fixes and extensions to the nommu mmap
implementation:
(1) /proc/maps distinguishes shareable private mappings and real shared
mappings by marking the former with 's' and the latter with 'S'.
(2) Rearrange and optimise the checking portion of do_mmap_pgoff() to make it
easier to follow.
(3) Only set VM_SHARED on MAP_SHARED mappings. Its presence indicates that the
backing memory is supplied by the underlying file or chardev.
VM_MAYSHARE indicates that a VMA may be shared if it's a private VMA. The
memory for a private VMA is allocated by do_mmap_pgoff() from a kmalloc
slab and then the file contents are read into it before returning.
(4) Permit MAP_SHARED + PROT_WRITE on memory-backed files[*] and chardevs to
indicate a contiguous area of memory when its get_unmapped_area() is
called if the backing fs/chardev is willing.
[*] file->f_mapping->backing_dev_info->memory_backed == 1
(5) Require chardevs and files that support to provide a get_unmapped_area()
file operation.
(6) Made sure a private mapping of /dev/zero is possible. Shared mappings of
/dev/zero are not currently supported because this'd need greater
interaction of mmap with the chardev driver than is currently supported.
(7) Add in some extra checks from mm/mmap.c: security, file having write
access for a writable shared mapping, file not being in append mode.
(8) Only account the mapping memory if it's allocated here; memory belonging
to a shared chardev or file is not accounted.
With this patch it should be possible to map contiguous flash files directly
out of ROM simply by providing get_unmapped_area() for a read-only/shared
mapping.
I think that it might be worth splitting do_mmap_pgoff() up into smaller
subfunctions: one to handle the checking, one to handle shared mappings and
one to handle private mappings.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2066, 2005-01-04 21:24:46-08:00, dhowells@redhat.com
[PATCH] Fix nommu MAP_SHARED handling
The attached patch does the following things:
(1) It uniquifies permitted overlapping VMAs (eg: MAP_SHARED on chardevs) in
nommu_vma_tree. Identical entries break the assumptions on which rbtrees
work. Since we don't need to share VMAs in this case, we uniquify such
VMAs by using the pointer to the VMA. They're only kept in the tree for
/proc/maps visibility.
(2) Extracts VMA unlinking into its own function so that the source is
adjacent to the VMA linking function.
(3) No longer releases memory belonging to a shared chardev or file (the
underlying driver is expected to provide mappable memory).
(4) Frees the file attached to a VMA whether or not that VMA is shared or is
a memory-mapped I/O mapping.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2065, 2005-01-04 21:24:34-08:00, dhowells@redhat.com
[PATCH] Implement nommu find_vma()
The attached patch implements a nommu version of find_vma().
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2064, 2005-01-04 21:24:21-08:00, dhowells@redhat.com
[PATCH] FRV: Change PML4 -> PUD
The attached patch changes the PML4 bits of the FRV arch to the new PUD way.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2063, 2005-01-04 21:24:08-08:00, dhowells@redhat.com
[PATCH] FRV: FR55x CPU support fixes
The attached patch fixes the following issues with support for the FR55x CPUs:
(1) The FR555 has a 64-byte cacheline size; everything else that we've come
across has a 32-byte cacheline size.
(2) Fix machine_restart() for FR55x.
(3) Fix frv_cpu_suspend() for FR55x.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2062, 2005-01-04 21:23:55-08:00, dhowells@redhat.com
[PATCH] FRV: pagetable handling fixes
The attached patch makes the following fixes to the frv arch:
(1) pte_offset() should no longer be around; the fault handler should use
pte_offset_kernel() instead when fixing up vmalloc misses.
(2) The PGEs/PMEs do not hold PTEs. They have greater address resolution and
fewer control bits.
(3) The data access error pattern in ESR15.EC should be 10000 not 10100.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2061, 2005-01-04 21:23:40-08:00, dhowells@redhat.com
[PATCH] frv: accidental TLB entry write-protect fix
The attached patch stops the FRV kernel-instruction-TLB-miss handler from
setting the write-protect bit on a mapping entry when punting an entry from
the mapping fast cache registers (DAMR1/IAMR1) to the TLB.
This patch derives the WP value from the DAMPR1 register (which actually has
a WP bit) rather than the IAMPR1 register (which does not).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2060, 2005-01-04 21:23:27-08:00, dhowells@redhat.com
[PATCH] frv: update the trap tables comment
The attached patch updates the FRV trap tables comment to make it more
appropriate.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2059, 2005-01-04 21:23:15-08:00, dhowells@redhat.com
[PATCH] frv: perfctr_info syscall
The attached patch gets rid of the perfctr_info syscall from the FRV arch now
that its implementation has gone and it has been removed from the i386 arch
and the i386 syscalls have been renumbered.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2058, 2005-01-04 21:23:02-08:00, dhowells@redhat.com
[PATCH] frv: Minix & ext2 bitops fixes
The attached patch does two things:
(1) Implements the ext2/ext3 bitops in terms of the main bitops functions.
(2) Changes the Minix bitops to use the ext2 bitops (LE) rather than the main
bitops (BE).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2057, 2005-01-04 21:22:49-08:00, dhowells@redhat.com
[PATCH] FRV: debugging fixes
The attached patch fixes three debugging problems in the frv arch:
(1) Single-stepping in userspace steps through into the kernel-mode interrupt
handler when a hardware interrupt happens, and sometimes it gets past
where the debug-mode handler would normally catch it. This patch extends
the range of detected PC values.
(2) When setting up the kernel-mode exception frame from the debug-mode
handler for a userspace debugging event, we weren't setting the LR
register to generate a return to the exception handler epilogue.
(3) sys_ptrace() now needs to "put" the inferior task_struct not "free" it as
was done in 2.4.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2056, 2005-01-04 21:22:36-08:00, dhowells@redhat.com
[PATCH] Make more syscalls available for the FR-V arch
The attached patch makes more syscalls available for the FR-V arch.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2055, 2005-01-04 21:22:23-08:00, dhowells@redhat.com
[PATCH] frv: nommu changes
The attached patch changes the nommu bits of the FRV arch to incorporate the
name changes made to the nommu core stuff.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2054, 2005-01-04 21:22:10-08:00, dhowells@redhat.com
[PATCH] Further nommu /proc changes
The attached patch changes the nommu procfs routines to match the nommu
changes in patch 1/1.
This is an exercise in structure renaming and handling the fact that the list
of VMAs in the system is now held together by vma->vm_rb.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2053, 2005-01-04 21:21:58-08:00, dhowells@redhat.com
[PATCH] Further nommu changes
The attached patch further changes the nommu stuff previously changed. These
new changes do the following:
(0) Some additional variables have been defined to make nommu even compile.
(1) Get rid of the alternate vm_area_struct. The nommu mmap now uses the
normal one. There's a refcount field added to the normal one, contingent
on !CONFIG_MMU.
(2) vm_rb is now used to keep track of the VMAs in an rbtree rather than
adding a separate list.
(3) mm_tblock_struct is now vm_list_struct.
(4) put_vma() now calls vma->vm_ops->close() if available on nommu.
(5) A dummy generic_file_vm_ops has been provided. It does nothing, but
permits tiny-shmem to compile.
tiny-shmem and ramfs still need attention, such that files contained
therein can be mmapped shared-writably to some extent on nommu.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2052, 2005-01-04 21:21:45-08:00, dhowells@redhat.com
[PATCH] Fix some ELF-FDPIC binfmt problems
The attached patch fixes the following problems in the ELF-FDPIC binfmt
driver:
(1) elf_fdpic_map_file() should be passed an mm_struct pointer, not NULL.
(2) do_mmap() should be called with the mmap_sem held.
(3) mm_struct::end_brk doesn't exist in 2.6 (debugging only).
(4) Avoid debugging warnings by casting certain values to unsigned long
before printing them.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2051, 2005-01-04 21:21:32-08:00, dhowells@redhat.com
[PATCH] FRV: Add FDPIC ELF binary format driver
The attached patch adds a new binary format driver that allows a special
variety of ELF to be used that permits the dynamic sections that comprise an
executable, its dynamic loader and its shared libaries and its stack and data
to be located anywhere within the address space.
This is used to provide shared libraries and shared executables (at least, as
far as the read-only dynamic sections go) on uClinux. Not only that, but the
same binaries can be run on MMU linux without a problem.
This is achieved by:
(1) Passing loadmaps to the dynamic loader (or to a statically linked
executable) to indicate the whereabouts of the various dynamic sections.
(2) Using a GOT inside the program.
(3) Passing setup_arg_pages() the stack pointer to be.
(4) Allowing the arch greated control over how an executable is laid out in
memory in MMU Linux.
(5) Rewriting mm/nommu.c to support MAP_PRIVATE on files, thus allowing _mmap_
to handle sharing of private-readonly mappings.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2050, 2005-01-04 21:21:18-08:00, dhowells@redhat.com
[PATCH] Fix usage of setup_arg_pages() in IA64, MIPS, S390 and Sparc64
The attached patch fixes the usage of setup_arg_pages() in the IA64, MIPS,
S390 and Sparc64 arches. This function now takes an extra parameter: the
initial top of stack. This is useful in uClinux when there's no fixed
location to which the stack pointer can be initialised.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2049, 2005-01-04 21:21:04-08:00, dhowells@redhat.com
[PATCH] FRV: change setup_arg_pages() to take stack pointer
The attached patch changes setup_arg_pages() to take the proposed initial stack
top for the new executable image. This makes it easier for the binfmt to place
the stack at a non-fixed location, such as happens in !MMU configurations.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2048, 2005-01-04 21:20:51-08:00, dhowells@redhat.com
[PATCH] FRV: procfs changes for nommu changes
The attached patch splits some memory-related procfs files into MMU and !MMU
versions and places them in separate conditionally-compiled files. A header
file local to the fs/proc/ directory is used to declare functions and the like.
Additionally, a !MMU-only proc file (/proc/maps) is provided so that master VMA
list in a uClinux kernel is viewable.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2047, 2005-01-04 21:20:39-08:00, dhowells@redhat.com
[PATCH] FRV: Better mmap support in uClinux
The attached patch changes mm/nommu.c to better support mmap() when MMU
support is disabled (as it is in uClinux).
This was discussed on the uclibc mailing list in a thread revolving around the
following message:
Date: Thu, 1 Apr 2004 12:05:50 +1000
From: David McCullough <davidm@snapgear.com>
To: David Howells <dhowells@redhat.com>
Cc: Alexandre Oliva <aoliva@redhat.com>, uclibc@uclibc.org
Subject: Re: [uClibc] mmaps for malloc should be private
Message-ID: <20040401020550.GG3150@beast>
The revised rules are:
(1) Anonymous mappings can be shared or private, read or write.
(2) Chardevs can be mapped shared, provided they supply a get_unmapped_area()
file operation and use that to set the address of the mapping (as a frame
buffer driver might do, for instance).
(3) Files (and blockdevs) cannot be mapped shared since it is not really
possible to honour this by writing any changes back to the backing device.
(4) Files (or sections thereof) can be mapped read-only private, in which case
the mapped bit will be read into memory and shared, and its address will
be returned. Any excess beyond EOF will be cleared.
(5) Files (or sections thereof) can be mapped writable private, in which case
a private copy of the mapped bit will be read into a new bit memory, and
its address will be returned. Any excess beyond EOF will be cleared.
Mappings are per MM structure still. You can only unmap what you've mapped.
Fork semantics are irrelevant, since there's no fork.
A global list of VMA's is maintained to keep track of the bits of memory
currently mapped on the system.
The new binfmt makes use of (4) to implement shared libraries.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2046, 2005-01-04 21:20:24-08:00, dhowells@redhat.com
[PATCH] FRV: Make calibrate_delay() optional
The attached patch makes calibrate_delay() optional. In this architecture, it's
a waste of time since we can predict exactly what it's going to come up with
just by looking at the CPU's hardware clock registers. Thus far, we haven't
seen a board with any clock not dependent on the CPU's clock.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2045, 2005-01-04 21:20:09-08:00, dhowells@redhat.com
[PATCH] FRV: Remaining Fujitsu FR-V arch include files
The attached patch provides the remaining arch-specific include files for
the Fujitsu FR-V CPU arch.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2044, 2005-01-04 21:19:55-08:00, dhowells@redhat.com
[PATCH] FRV: Yet more Fujitsu FR-V arch include files
The attached patch provides the third 100KB or so of the arch-specific
include files for the Fujitsu FR-V CPU arch.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2043, 2005-01-04 21:19:42-08:00, wli@holomorphy.com
[PATCH] convert FRV to use remap_pfn_range
This patch converts FRV to use remap_pfn_range() in its
io_remap_page_range() function.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2042, 2005-01-04 21:19:30-08:00, dhowells@redhat.com
[PATCH] FRV: More Fujitsu FR-V arch include files
The attached patch provides the second 100KB or so of the arch-specific
include files for the Fujitsu FR-V CPU arch.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2041, 2005-01-04 21:19:15-08:00, dhowells@redhat.com
[PATCH] frv: Fix PCI config space write
The attached patch makes byte and word writes to PCI config space work.
The problem was that the pointer to the appropriate chunk of the config
port needs to be juggled to allow for the fact that FRV is big endian in
this case.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2040, 2005-01-04 21:19:03-08:00, dhowells@redhat.com
[PATCH] frv: PCI DMA fixes
The attached patch makes cache flushing work correctly on DMA consistent
memory for the frv arch. On the FRV unmapped memory can't be flushed
directly, but has to be kmapped first since the flush instructions take
virtual pointers not physical ones.
It also splits the MMU and !MMU versions into separate files.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2039, 2005-01-04 21:18:48-08:00, dhowells@redhat.com
[PATCH] frv: emove obsolete hardirq stuff from includes
The attached patch removes irq_enter() and friends from asm-frv/hardirq.h as
they are now mandatorily defined in linux/hardirq.h.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2038, 2005-01-04 21:18:35-08:00, dhowells@redhat.com
[PATCH] FRV: First batch of Fujitsu FR-V arch include files
The attached patch provides the first 100KB or so of the arch-specific
include files for the Fujitsu FR-V CPU arch.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2037, 2005-01-04 21:18:21-08:00, haveblue@us.ibm.com
[PATCH] kill off highmem_start_page
People love to do comparisons with highmem_start_page. However, where
CONFIG_HIGHMEM=y and there is no actual highmem, there's no real page at
*highmem_start_page.
That's usually not a problem, but CONFIG_NONLINEAR is a bit more strict and
catches the bogus address tranlations.
There are about a gillion different ways to find out of a 'struct page' is
highmem or not. Why not just check page_flags? Just use PageHighMem()
wherever there used to be a highmem_start_page comparison. Then, kill off
highmem_start_page.
This removes more code than it adds, and gets rid of some nasty
#ifdefs in .c files.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2036, 2005-01-04 21:18:08-08:00, dhowells@redhat.com
[PATCH] Put memory in DMA zone not Normal zone in FRV arch
The attached patch makes the FR-V arch put all its memory in the DMA zone
rather than the Normal zone since all the memory is available as a DMA
target.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2035, 2005-01-04 21:17:55-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 9
The attached patches provides part 9 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2034, 2005-01-04 21:17:41-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 8
The attached patches provides part 8 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2033, 2005-01-04 21:17:28-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 7
The attached patches provides part 7 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2032, 2005-01-04 21:17:14-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 6
The attached patches provides part 6 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2031, 2005-01-04 21:17:01-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 5
The attached patches provides part 5 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2030, 2005-01-04 21:16:47-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 4
The attached patches provides part 4 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2029, 2005-01-04 21:16:34-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 3
The attached patches provides part 3 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2028, 2005-01-04 21:16:20-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 2
The attached patches provides part 2 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2027, 2005-01-04 21:16:06-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch implementation part 1
The attached patches provides part 1 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2026, 2005-01-04 21:15:53-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V arch documentation
The attached patch provides the arch-specific documentation for the Fujitsu
FR-V CPU arch.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2025, 2005-01-04 21:15:39-08:00, dhowells@redhat.com
[PATCH] FRV: Fujitsu FR-V CPU arch maintainer record
The attached patch supplies the maintainer record for an architecture
implementation for the Fujistu FR-V CPU series.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2024, 2005-01-04 21:15:26-08:00, dhowells@redhat.com
[PATCH] VM routine fixes
The attached patch fixes a number of problems in the VM routines:
(1) Some inline funcs don't compile if CONFIG_MMU is not set.
(2) swapper_pml4 needn't exist if CONFIG_MMU is not set.
(3) __free_pages_ok() doesn't counter set_page_refs() different behaviour if
CONFIG_MMU is not set.
(4) swsusp.c invokes TLB flushing functions without including the header file
that declares them.
CONFIG_SHMEM semantics:
- If MMU: Always enabled if !EMBEDDED
- If MMU && EMBEDDED: configurable
- If !MMU: disabled
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2023, 2005-01-04 21:15:13-08:00, dhowells@redhat.com
[PATCH] frv: add initdata variable spec in a header file
The attached patch marks a variable as __initdata in a header file so that
the FRV gcc generates the correct access method as initdata variables are
too far from the GPREL pointer to access directly.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2022, 2005-01-04 21:15:00-08:00, dhowells@redhat.com
[PATCH] GP-REL data support
The attached patch makes it possible to support gp-rel addressing for small
variables. Since the FR-V cpu's have fixed-length instructions and plenty of
general-purpose registers, one register is nominated as a base for the small
data area. This makes it possible to use single-insn accesses to access
global and static variables instead of having to use multiple instructions.
This, however, causes problems with small variables used to pinpoint the
beginning and end of sections. The compiler assumes it can use gp-rel
addressing for these, but the linker then complains because the displacement
is out of range.
By declaring certain variables as arrays or by forcing them into named
sections, the compiler is persuaded to access them as if they can be outside
the displacement range. Declaring the variables as "const void" type also
works.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2021, 2005-01-04 21:14:46-08:00, dhowells@redhat.com
[PATCH] out-of-line implementation of find_next_bit()
The attached patch provides an out-of-line implementation of find_next_bit()
and rearranges linux/bitops.h to avoid a dependency loop between inline
functions in there and in asm/bitops.h trying to include one another.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2020, 2005-01-04 21:14:32-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: tidy up the htab_data structure
More tidying up.
The htab_data structure contained 5 fields or which two were completely
unused and one other was just kept for printing at boot time. I have mode
the remaining two into global variables.
Built and booted on iSeries (which is always lpar) and on pSeries without
partitioning.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2019, 2005-01-04 21:14:19-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: use c99 initializers
This patch is just more clean up in the ppc64 arch. It uses c99 initializers
for various iSeries structures that are used to pass information to the
hypervisor. Also itLpNaca is not used by any code that could be in a module,
so don't export it.
Built and booted.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2018, 2005-01-04 21:14:06-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove StudlyCaps from lppaca structure
This patch just renames all the fields (and the structure name) of the
lppaca structure to rid us of some more StudyCaps.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2017, 2005-01-04 21:13:53-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: move the lppaca defining header file
This patch just renames asm/iSeries/ItLpPaca.h to asm/lppaca.h as the
lppaca structure is no longer just legacy iSeries specific.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2016, 2005-01-04 21:13:18-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: use xPMCRegsInUse
This fixes an aweful piece of code that could have just referenced
xPMCRegsInUse in the lppaca structure.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2015, 2005-01-04 21:13:07-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove the naca from all but iSeries
This patch finally removes the naca from all architectures except legacy
iSeries and in the process makes it a structure instead of a pointer.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2014, 2005-01-04 21:12:54-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove debug_switch from the naca
The patch moves the debug_switch from the naca to a global variable.
Also, a couple of trivial naming tidy ups.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2013, 2005-01-04 21:12:41-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove serialPortAddr from the naca
The serialPortAddr field of the naca was only being used locally, remove
it.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2012, 2005-01-04 21:12:28-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove the paca pointer form the naca
The only place that was using the paca pointer that was in the naca was some
assembler that used it to find a parameter to pass to some C code. That C
code did not even declare that parameter!
Remove the paca pointer.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2011, 2005-01-04 21:12:14-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove /proc/ppc64/{naca,paca/xx}
This patch removes the (unused) /proc entries for the naca and the (per cpu)
pacas. Also it removes a lot of no longer necessary includes of <asm/naca.h>.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2010, 2005-01-04 21:12:02-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove interrupt_controller from naca
This patch just moves the interrupt_controller field of the naca into a
global variable.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2009, 2005-01-04 21:11:49-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: remove the page table size from the naca
This patch just removes the page table size field from the naca (and makes
it ppc64_pft_size instead).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2008, 2005-01-04 21:11:36-08:00, sfr@canb.auug.org.au
[PATCH] ppc64: consolidate cache sizing variables
This patch consolidates the variables that define the PPC64 cache sizes into a
single structure (the were in the naca and the systemcfg structures). Those
that were in the systemcfg structure are left there just because they are
exported to user mode through /proc.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2007, 2005-01-04 21:11:24-08:00, paulus@samba.org
[PATCH] ppc64: simplify timer_interrupt
This patch is from Milton Miller <miltonm@bga.com>.
When the update_process_times call was moved out of do_timer for the UP
case, the replicator didn't track down the hiding and just added ifndef
SMP.
This removes the ifdefs and the indirection of calling another file for one
function in a third file.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2006, 2005-01-04 21:11:12-08:00, anton@samba.org
[PATCH] ppc64: remove stale prom.h code
Remove some stale code in prom.h
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2005, 2005-01-04 21:10:59-08:00, anton@samba.org
[PATCH] ppc64: fix some compiler warnings
Fix some compiler warnings:
- The first two are spurious gcc warnings, but quieten them up regardless
- Add a missing include
- Use register_sysrq_key instead of __sysrq_put_key_op
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2004, 2005-01-04 21:10:46-08:00, anton@samba.org
[PATCH] ppc64: Clarify rtasd printk
On machines with RTAS but without event-scan support we would incorrectly
claim there was no RTAS on the system.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2003, 2005-01-04 21:10:33-08:00, anton@samba.org
[PATCH] ppc64: catch bad xmon read/write SPR commands
Protect the read/write SPR xmon commands.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2002, 2005-01-04 21:10:19-08:00, anton@samba.org
[PATCH] ppc64: limit xmon dump length
A number of people (myself included) have pasted bad input into xmon that
it parsed as a request to dump gigabytes of memory.
Place a limit of 128kB on the dump commands. Also remove a stale function
prototype thats been lying around.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2001, 2005-01-04 21:10:06-08:00, serue@us.ibm.com
[PATCH] capset returns -EPERM when pid==current->pid
In the current kernel/capability.c:sys_capset() code, permission is
denied if CAP_SETPCAP is not held and pid is positive. pid=0 means use
the current process, and this is allowed. But using the current
process' pid is not allowed. The man page for capsetp simply says that
CAP_SETPCAP is required to use this function, and does not mention the
exception for pid=0.
The current behavior seems inconsistent. The attached patch also
allows a process to call capset() on itself.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.2000, 2005-01-04 21:09:53-08:00, serue@us.ibm.com
[PATCH] properly split capset_check+capset_set
The attached patch removes checks from kernel/capability.c which are
redundant with cap_capset_check() code, and moves the capset_check() calls
to immediately before the capset_set() calls. This allows capset_check()
to accurately check the setter's permission to set caps on the target.
Please apply.
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1999, 2005-01-04 21:09:40-08:00, oleg@tv-sign.ru
[PATCH] fix double sync_page_range() in generic_file_aio_write()
generic_file_aio_write():
generic_file_aio_write_nolock():
if (SYNC) sync_page_range_nolock();
if (SYNC) sync_page_range();
I think that generic_file_aio_write() should use
__generic_file_aio_write_nolock() instead.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1998, 2005-01-04 21:09:27-08:00, wli@holomorphy.com
[PATCH] fix arch/x86_64/ia32/syscall32.c misdeclared pud variable
pud needs to be declared as a pud_t in order to avoid an assignment from
incompatible pointer type warning or two; this patch makes it so.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1997, 2005-01-04 21:09:14-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: fix pgd_index() compile warnings
the patch below fixes a few compile warnings due to missing parenthesizes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1996, 2005-01-04 20:15:26-08:00, rusty@rustcorp.com.au
[PATCH] More ECN Fixes: make writable before writing
Patrick McHardy spotted this, on top of previous fix. I neatened it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1995, 2005-01-04 20:15:13-08:00, rusty@rustcorp.com.au
[PATCH] ftp nonlinear packet fix
FTP connection tracking assumes it can just dereference tcphdr; not
neccessarily true now we don't linearize in ftp conntrack helper or
tcp connection tracking. Also found by nfsim.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1994, 2005-01-04 20:15:00-08:00, rusty@rustcorp.com.au
[PATCH] Fix for NAT core on nonlinear skbs
The nat core calls skb_ip_make_writable() with a length too short.
Found by nfsim.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1993, 2005-01-04 20:14:47-08:00, rusty@rustcorp.com.au
[PATCH] Fix for UDP and TCP NAT on nonlinear skbs
UDP and TCP refer to potentially stale pointers after calling
skb_ip_make_writable(), and UDP calls it with the wrong len argument.
All found by nfsim.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1992, 2005-01-04 20:14:34-08:00, rusty@rustcorp.com.au
[PATCH] Conntrack Hash Allocation using __get_free_pages
Here is a patch that just makes it use get_free_pages to test the TLB
theory. Another obvious improvement would be to not use list_heads for
the hash table buckets - a single pointer would likely suffice and it
would cut the hash table in half, saving cache, TLB and memory.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1991, 2005-01-04 20:14:21-08:00, rusty@rustcorp.com.au
[PATCH] Multiport revision with port ranges (replaces "mport")
The multiport match doesn't support ranges of ports, so a new match
called "mport" was written. Now we have versioning of matches and
targets, we can simply put this extension in multiport revision 1.
Also, removes gratuitous checking in match: we basically trust
iptables userspace these days.
Signed-off-by: Pablo Neira Ayuso <pablo@eurodev.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (modified)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1990, 2005-01-04 20:14:08-08:00, rusty@rustcorp.com.au
[PATCH] Add bitops to ipt_MARK without breaking compatbility
Anders Fugmann <afu@fugmann.dhs.org> wrote a patch to add bitops to
ipt_MARK. I made a version based on the revision patch.
Bart De Schuymer <bdschuym@pandora.be> provided the idea of overriding
the target type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1989, 2005-01-04 20:13:55-08:00, rusty@rustcorp.com.au
[PATCH] iptables revision getsockopt
This adds a new getsockopt to iptables, which allows userspace to
query the revision number of extensions. iptables 1.3.0 (to be
released soon) already has support for this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1988, 2005-01-04 20:13:42-08:00, rusty@rustcorp.com.au
[PATCH] Steal a Character To Create a Revision Number
Pablo Neira <pablo@eurodev.net> came up with the idea of stealing the
last byte in the (already nul-terminated) name of a target/match to
create a version.
That patch motivated me to clean up the match and target searching in
ip_tables, which makes this patch more trivial. I also renamed
"version" to "revision" since the word "version" was used for iptables
itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1987, 2005-01-04 20:13:30-08:00, rusty@rustcorp.com.au
[PATCH] Clean up the kmod handling code in iptables.c
We now have a convenient kmod macro try_then_request_module().
1) Split our current "generic" function into separate
find_target_lock(), find_table_lock() and find_match_lock()
functions explicitly.
2) Have those functions do try_module_get() for us, and fix up the one
caller who didn't do that anyway.
3) Have the caller use try_then_request_module().
4) Remove __ipt_mutex_up() and __ipt_find_target_lock() which weren't
used (even in patch-o-matic AFAICT).
This cleanup takes us closer to using standard list macros everywhere,
and makes the version patch simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1986, 2005-01-04 20:13:17-08:00, rusty@rustcorp.com.au
[PATCH] Remove Randomness in Selecting NAT IP Address
We currently choose a "random" IP address to NAT to, where we have a
range. Martin Josefsson pointed out that he uses the SAME target in
iptables because changing IP addresses breaks Internet banking sites
(among others) which assume the customer will be coming from a
consistent IP address.
In fact, we spend a fair bit of effort trying to balance the number of
connections we NAT to each IP address. We can come pretty damn close
just hashing the source and destination IP addresses, and it has the
consistency property which is so desirable, as well as being faster.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1985, 2005-01-04 20:13:04-08:00, rusty@rustcorp.com.au
[PATCH] Warn when old code would have done extra mangling
Now we no longer do extra mangling, warn in that case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1984, 2005-01-04 20:12:51-08:00, rusty@rustcorp.com.au
[PATCH] Remove do_extra_mangle: double NAT on LOCAL_OUT
On NF_IP_LOCAL_OUT, when destination NAT changes the destination
interface, we also change the source address, so the packet is the
same as if it were generated to go that way in the first place. This
is not strictly necessary, I believe.
This patch rips that code out to see what breaks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1983, 2005-01-04 20:12:38-08:00, rusty@rustcorp.com.au
[PATCH] Don't try too hard to NAT to unique tuple
On NF_IP_LOCAL_OUT or NF_IP_PRE_ROUTING, if destination NAT is not
sufficient to create a unique tuple, we try changing the source port
as well. However, this is also not strictly necessary: if the tuple
is not unique, we will also try to change the source on the
NF_IP_POST_ROUTING hook.
When we finally confirm the connection, if the tuple is still not
unique the packet will be dropped (this is required anyway as we could
race: the conntrack is not placed in the hash until the packet is
about to leave the box anyway).
In fact, we only need best effort *everywhere*.
This patch rips that code out to see what breaks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1982, 2005-01-04 20:12:25-08:00, rusty@rustcorp.com.au
[PATCH] ip_conntrack_alter_reply doesn't need to loop
ip_conntrack_alter_reply checks that the reply isn't already taken,
but there's little point, since there's *still* a race after it is
called (which we handle at confirm time anyway).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1981, 2005-01-04 20:12:12-08:00, rusty@rustcorp.com.au
[PATCH] Remove NAT to multiple ranges
The NAT code has the concept of multiple ranges: you can say "map this
connection onto IP 192.168.1.2 - 192.168.1.4, 192.168.1.7 ports
1024-65535, and 192.168.1.10". I implemented this because we could.
But it's not actually *used* by many (any?) people, and you can
approximate this by a random match (from patch-o-matic) if you really
want to. It adds complexity to the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1980, 2005-01-04 20:11:59-08:00, rusty@rustcorp.com.au
[PATCH] When ipt_ECN needs TCP, check it is not inverted
Writing the nfsim testcase for the ECN target revealed a hole in the
rule checking: when checking whether the rule specified TCP, you need
to check it isn't inverted.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1979, 2005-01-04 20:11:46-08:00, rusty@rustcorp.com.au
[PATCH] ipt_REJECT Target nonlinear fixes
nfsim now generates non-linear packets: when run under valgrind it
finds linear assumptions very nicely. This is the second thing I
tried, and it found a real bug.
In this case, checking the UDP checksum is correct, but overkill, and
like the ICMP header handling, does not handle non-linear packets. Remove UDP
checksum, fix ICMP error.
Signed-off-by: Rusty Russell
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1978, 2005-01-04 15:59:03-08:00, chrisw@osdl.org
[PATCH] fix up dummy security module code merge
OK, somehow I managed to botch this one. It happens to work fine, but I
should have been more careful with forward porting this 1+ year old patch.
The exec-time calc should go in bprm_apply_creds, not bprm_free_security.
Thanks to Stephen for spotting my mistake.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1977, 2005-01-04 15:57:57-08:00, torvalds@ppc970.osdl.org
Merge bk://nfsclient.bkbits.net/linux-2.6
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.1975.1.2, 2005-01-04 15:57:25-08:00, brugolsky@telemetry-investments.com
[PATCH] NFS client O_DIRECT error case fix
The NFS direct-io error return path for request sizes greater than
MAX_DIRECTIO_SIZE fails to initialize the returned page struct array
pointer to NULL.
Discovered using AKPM's ext3-tools: odwrite -ko 0 16385 foo
Signed-off-by: Bill Rugolsky <brugolsky@telemetry-investments.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.487.6, 2005-01-04 22:45:01+00:00, Liam.Girdwood@com.rmk.(none)
[ARM PATCH] 2347/1: PXA SSP PSP bit definition
Patch from Liam Girdwood
This patch adds a bit definition for the SSP port PSP mode.
Signed-off-by: Liam Girdwood
Signed-off-by: Russell King
ChangeSet@1.1938.487.5, 2005-01-04 22:39:50+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2346/1: Update IXP4xx documentation
Patch from Deepak Saxena
This patch updates the IXP4xx documentation with information about
the latest chipsets and supported devices.
Supercedes 2308/1
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1938.487.4, 2005-01-04 22:34:56+00:00, ben-linux@org.rmk.(none)
[ARM PATCH] 2345/1: S3C24XX - serial init depending on cpu detected
Patch from Ben Dooks
Use the cpu-type detected in arch/arm/mach-s3c2410/cpu.c
to work out which uart initialisation routine to call,
instead of relying on the one called within mach-xxxx.c.
This allows one machine-type to run with either an 2410 or
2440 cpu installed.
Thanks to Dimitry Andric for the original patch.
Signed-off-by: Ben Dooks
Signed-off-by: Russell King
ChangeSet@1.1938.487.3, 2005-01-04 22:29:29+00:00, ben-linux@org.rmk.(none)
[ARM PATCH] 2344/1: S3C2440 - fix mapping of watchdog for reboot
Patch from Ben Dooks
Ensure the watchdog timer is mapped for use with
the reboot code. Also fixes minor comment typo.
Signed-off-by: Dimitry Andric
Signed-off-by: Ben Dooks
Signed-off-by: Russell King
ChangeSet@1.1975, 2005-01-04 14:28:02-08:00, Andries.Brouwer@cwi.nl
[PATCH] remove duplicated patch fragment
Acked-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.487.2, 2005-01-04 22:24:26+00:00, ben-linux@org.rmk.(none)
[ARM PATCH] 2343/1: S3C2410 / S3C2440 MAINTAINERS entries
Patch from Ben Dooks
Mainter entries for ARM/S3C2410 and ARM/S3C2410 ARM
Architectures, mainted by Ben Dooks on behalf of
Simtec Electronics.
Signed-off-by: Ben Dooks
Signed-off-by: Russell King
ChangeSet@1.1974, 2005-01-04 13:54:13-08:00, chrisw@osdl.org
[PATCH] track capabilities in default dummy security module code
Switch dummy logic around to set cap_* bits during exec and set*uid based
on basic uid check. Then check cap_* bits during capable() (rather than
doing basic uid check). This ensures that capability bits are properly
initialized in case the capability module is later loaded.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.487.1, 2005-01-04 20:03:09+00:00, rmk@flint.arm.linux.org.uk
[ARM] Fix slab corruption issues triggered with pud_t integration.
When the page tables are wrapped from 4 levels to 2 levels, the new
MM code requires PMD_SHIFT to match PUD_SHIFT, which must also
match PGDIR_SHIFT. If PMD_SHIFT is smaller than PUD_SHIFT, we risk
freeing a still-in-use table (== page) which can then get re-used
for the slab cache.
Testing and inspection shows that there isn't any real benefit from
keeping PMD_SHIFT set to 20.
In addition, add some comments concerning the granularity of
alloc_init_section() and fix a missing PMD assignment in the
rebooting code. Somehow we managed to get away with that, although
it is actually wrong. Maybe I've just been lucky until now.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1971.1.35, 2005-01-04 19:49:09+01:00, trond.myklebust@fys.uio.no
RPC: call_verify
Don't label all retries as "server seeing garbage".
Report correct error for buffer overflows.
Fix incorrect buffer overflow test that was masking
AUTH_REJECTEDCRED, AUTH_REJECTEDVERF,... errors.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
ChangeSet@1.1971.1.34, 2005-01-04 19:48:45+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: incorrect "df" results
Description:
Fix an NFS client bug introduced in 2.6.9-rc1. The "df" command was
reporting the size of NFS file systems incorrectly.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.33, 2005-01-04 19:48:17+01:00, trond.myklebust@fys.uio.no
NFS: Ensure ACCESS caches are invalidated together with the attribute
cache.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.32, 2005-01-04 19:47:52+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: use attribute timeout instead of "noac" mount option
The behavior enabled by the "noac" mount option should be precisely
equivalent to setting acreg{min,max} or acdir{min,max} to zero via mount
options.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.31, 2005-01-04 19:47:24+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: Direct reads and writes need to flush dirty cache pages
Other parts of the NFS client invoke nfs_wb_all() when they want to flush dirty
cache pages. The direct path needs to do that, too.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.30, 2005-01-04 19:47:00+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: Use parallel read operations to do direct read requests
The initial implementation of NFS direct reads was entirely synchronous.
The direct read logic issued one NFS READ operation at a time, and waited
for the server's reply before issuing the next one. For large direct
read requests, this is unnecessarily slow.
This patch changes the NFS direct read path to dispatch NFS READ operations
for a single direct read request in parallel and wait for them once. The
direct read path is still synchronous in nature, but because the NFS READ
operations are going in parallel, the completion wait should be much shorter.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.29, 2005-01-04 19:46:31+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: Direct read path allocates nfs_read_data on the stack
Reduce stack utilization in the NFS direct read path by using a
dynamically allocated nfs_read_data structure instead of allocating one
on the stack. This reduces stack utilization of nfs_direct_read_seg
from over 900 bytes to less than 100 bytes.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.28, 2005-01-04 19:46:04+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: Direct write path allocates nfs_write_data on the stack
Reduce stack utilization in the NFS direct write path by using a
dynamically allocated nfs_write_data structure instead of allocating one
on the stack. This reduces stack utilization of nfs_direct_write_seg
from over 900 bytes to less than 100 bytes.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.27, 2005-01-04 19:45:37+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: better handling of short writes in direct write path
Immediately return control to the application if a short NFS write is
detected in the NFS client's direct write path. This is better behavior
than what the direct write path does today, which could result in data
appearing at the wrong offset in the file.
Eventually this code path should retry short writes at least once before
giving up.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.26, 2005-01-04 19:45:13+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: Use sizeof() instead of C macro
Replace a C macro with sizeof().
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.25, 2005-01-04 19:44:43+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] RPC: display XIDs in host order
Description:
Ethereal and other tools display RPC XIDs in host order. This patch
changes the RPC trace messages that display XIDs to print them in host
order so they can be easily matched to XIDs that appear in Ethereal.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.24, 2005-01-04 19:44:19+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: report return code on GETATTR and SETATTR
Improve trace debugging messages for NFSv2/3 GETATTR and SETATTR
procedures.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.23, 2005-01-04 19:43:50+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: short write warning
Recently a patch set was accepted to allow the Linux NFS client to handle
short writes by retrying the unwritten portion of the request. The only
case that now results in an error is when the server makes no progress;
that is, writes zero bytes.
This patch changes the kernel log warning that is generated in that case
to reflect the error condition more accurately.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.22, 2005-01-04 19:43:24+01:00, trond.myklebust@fys.uio.no
NFS: Fix dentry refcount accounting error which causes unnecessary
sillyrenames when renaming to an existing file.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.21, 2005-01-04 19:42:56+01:00, trond.myklebust@fys.uio.no
NFS: when we mount with the "nolock" flag we need to use local locking.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.20, 2005-01-04 19:42:30+01:00, trond.myklebust@fys.uio.no
VFS: Remove LOCK_USE_CLNT. It should no longer be necessary.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.19, 2005-01-04 19:42:03+01:00, trond.myklebust@fys.uio.no
RPC: Optimize away unnecessary del_timer_sync() operations, when we
know there are no pending timers.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.18, 2005-01-04 19:41:37+01:00, trond.myklebust@fys.uio.no
VFS: Avoid dentry aliasing problems in filesystems like NFS, where
inodes may be marked as stale in one instance (causing the dentry
to be dropped) then re-enabled in the next instance.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.17, 2005-01-04 19:41:11+01:00, trond.myklebust@fys.uio.no
NFSv2/v3/v4: ESTALE should not be a permanent condition on directories.
Although it usually means that someone has deleted a file on the server,
the ESTALE error may also indicate that the sysadmin has used exportfs to
deny our client access to the server. Most NFS implementations therefore
consider it a non-permanent condition, and allow inodes to "recover" when
the sysadmin re-enables access.
If, however, you want to work with broken servers, like unfsd, that reuse
filehandles for new files after the original file gets deleted, then
"recovery" is impossible, since it may be that the filehandle now points
to a different file. Note that this is broken server behaviour that may
happen even without us ever seeing the ESTALE error.
In order to minimize (but we can never eliminate entirely) this race
condition on unfsd servers, Linux has traditionally made ESTALE a
permanent condition on all filehandles except the root filehandle.
The problem is that if we apply this strict staleness criterion to
directories (particularly so for he current directory), then all
processes will need to re-walk the path starting from the mount point,
in order to recover from the sysadmin intervention case. As this is not
usual on other *NIX implementations, and may in any case be undermined by
caching rules etc, this is being seen as a usability problem.
This patch makes ESTALE a non-permanent condition on directories, but
preserves the current behaviour for non-directories.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.16, 2005-01-04 19:40:47+01:00, trond.myklebust@fys.uio.no
Subject: [PATCH] NFS: Sync NFS writes still use kmalloc
Replace the kmalloc() and kfree() calls in this path with appropriate
invocations of nfs_writedata_alloc() and nfs_writedata_free(). This
makes nfs_writepage_sync match all the other write paths in fs/nfs/write.c.
Category: Maintainability, performance
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.15, 2005-01-04 19:40:18+01:00, trond.myklebust@fys.uio.no
RPCSEC_GSS: Miscellaneous cleanup of auth_gss.c: we're passing something
as a void * when we know perfectly well what it is. And we're passing
some arguments that we don't actually use.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.14, 2005-01-04 19:39:55+01:00, trond.myklebust@fys.uio.no
RPC: The RPCAUTH_CRED_DEAD flag had been unused for some time before I
unwisely revived it for use with the gss code. Having removed that use
from the gss code, it's time to remove all references to it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.13, 2005-01-04 19:39:27+01:00, trond.myklebust@fys.uio.no
RPC: Instead of setting a flag (RPCAUTH_CRED_DEAD) in the cred to
indicate failure of an upcall to get a gss context for that cred,
set the status of waiting tasks to indicate failure.
This solves problems e.g. with creds with the CRED_DEAD flag set
never being refreshed, which caused krb5 mounts to fail after the
context used to do RENEWS expired.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.12, 2005-01-04 19:39:01+01:00, trond.myklebust@fys.uio.no
RPCSEC_GSS: When the gss code notices that a cred has expired, mark
the cred containing the context non-uptodate, triggering creation of
a new context.
Note that on the send-side operations (get_mic, wrap), we mark the
cred as not uptodate, but continue trying to use it; the server can
complain if it wants to, and the next time through we'll refresh it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.11, 2005-01-04 19:38:37+01:00, trond.myklebust@fys.uio.no
NFSv4: Convert the NFSv4 close and open_downgrade operations to use
asynchronous RPC calls.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.10, 2005-01-04 19:38:13+01:00, trond.myklebust@fys.uio.no
NFSv4: setattr, close and open_downgrade should use the state_owner's
credentials when they are available.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.9, 2005-01-04 19:37:47+01:00, trond.myklebust@fys.uio.no
NFSv4: Make nfs4_do_open() take a dentry argument.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.8, 2005-01-04 19:37:20+01:00, trond.myklebust@fys.uio.no
NFS: Change rpc_ops->create() to take a dentry argument rather than a
qstr.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.7, 2005-01-04 19:36:52+01:00, trond.myklebust@fys.uio.no
NFS: The fact that readdirplus calls now create dentries from within readdir
calls renders nfs_cached_lookup() obsolete.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.6, 2005-01-04 19:36:29+01:00, trond.myklebust@fys.uio.no
NFS: Make readdirplus create dentries on the fly when we're running
through the directory.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.5, 2005-01-04 19:36:01+01:00, trond.myklebust@fys.uio.no
RPC: Add missing calls to flush_dcache_page() in net/sunrpc/xdr.c
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
ChangeSet@1.1971.1.4, 2005-01-04 19:35:39+01:00, trond.myklebust@fys.uio.no
RPC: More aggressive RPC debugging code.
People are worrying about spinlock deadlocks in the debugging code, without
actually worrying about the bugs that triggered the debugging code in the
first place.
Convert to BUG_ON() in order to ensure that bugs are reported.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
ChangeSet@1.1971.1.3, 2005-01-04 19:35:12+01:00, trond.myklebust@fys.uio.no
RPC: Fix a bug in rpc_killall_tasks().
Shirly Ma reported seeing problems with rpc_killall_tasks() causing
the task->tk_magic debugging test to trigger. It turns out we may be
killing tasks that are not yet running or even initialized.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
ChangeSet@1.1971.1.2, 2005-01-04 19:34:47+01:00, trond.myklebust@fys.uio.no
RPC: Remove the rpc_queue_lock global spinlock. Replace it with per-rpc_queue
spinlocks.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1971.1.1, 2005-01-04 19:34:21+01:00, trond.myklebust@fys.uio.no
RPC: Convert rpciod into a work queue for greater flexibility.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>
ChangeSet@1.1972, 2005-01-04 10:06:07-08:00, torvalds@ppc970.osdl.org
Mark HPUSBSCSI scanner broken. You're supposed to use libusb.
ChangeSet@1.1971, 2005-01-04 08:16:58-08:00, torvalds@ppc970.osdl.org
Hide question about SERIO_LIBPS2 unless there is some remote
reason the user migth want to see it.
Under any normal use it gets auto-selected by PS/2 mouse or ATKBD
support anyway, and if those aren't selected there's no reason to
select this one either unless you have some very special uses.
ChangeSet@1.1938.486.1, 2005-01-04 08:03:51-08:00, torvalds@ppc970.osdl.org
Merge bk://linux-sam.bkbits.net/kbuild
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.1938.1.210, 2005-01-04 16:27:54+01:00, perex@suse.cz
[ALSA] Print values at errors
EMU10K1/EMU10K2 driver
Print out the invalid values at resource allocation errors, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.209, 2005-01-04 16:26:38+01:00, perex@suse.cz
[ALSA] Don't probe sample rates on non-VRA chips
ES1968 driver,CA0106 driver,EMU10K1/EMU10K2 driver
Don't probe sample rates on chips which need no VRA.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.208, 2005-01-04 16:25:23+01:00, perex@suse.cz
[ALSA] Add codec id in component names
AC97 Codec Core
Added codec id number to the component names.
The component becomes like 'AC97a:12345678'.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.207, 2005-01-04 16:24:14+01:00, perex@suse.cz
[ALSA] Fix C-Media codecs
AC97 Codec Core
Don't create PCM (and Master for CM9739/9761) volume controls for some of
C-Media codecs. The volume is supposed to be controlled via softvol plugin.
The wrong (duble) entry for a CM9761 model is removed, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.480.7, 2005-01-04 15:46:20+01:00, dwmw2@shinybook.infradead.org
Merge shinybook.infradead.org:/home/dwmw2/bk/linus-2.6
into shinybook.infradead.org:/home/dwmw2/bk/mtd-2.6
ChangeSet@1.1969, 2005-01-04 09:06:19+01:00, vojtech@suse.cz
Merge suse.cz:/home/vojtech/bk/linus into suse.cz:/home/vojtech/bk/input
ChangeSet@1.1938.1.205, 2005-01-04 08:36:32+01:00, perex@suse.cz
[ALSA] Add a DXS entry for ABIT VA-20
VIA82xx driver
Added a DXS whitelist entry for ABIT VA-20.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.204, 2005-01-04 08:35:21+01:00, perex@suse.cz
[ALSA] Fix NULL pointer access
MIXART driver
Fixed NULL pointer access when id string isn't given.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.203, 2005-01-04 08:34:08+01:00, perex@suse.cz
[ALSA] Add a new ID
CA0106 driver
I attach a minor update that corrects the DMA mask, and adds an extra
ID. This sound card can handle 32bit DMA addresses.
Signed-off-by: James Courtier-Dutton <James@superbug.demon.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.202, 2005-01-04 08:28:18+01:00, perex@suse.cz
[ALSA] Clean up and fix stereo mutes
AC97 Codec Core
Clean up the build of controls. The volume resolution detection is
unified.
Fixed minor bugs to handle stereo mutes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.201, 2005-01-04 08:26:44+01:00, perex@suse.cz
[ALSA] Clean up handling of user-defined controls
Control Midlevel
Cleaned up the code to handle user-defined controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.467.10, 2005-01-04 06:48:44+01:00, akpm@osdl.org
bk-kbuild-in_gate_area_no_task-warning-fix
arch/x86_64/mm/init.c: In function `in_gate_area_no_task':
arch/x86_64/mm/init.c:656: warning: suggest parentheses around && within ||
In file included from include/asm/numa.h:5,
from arch/x86_64/kernel/setup.c:60:
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.483.186, 2005-01-03 21:21:57-08:00, zwane@arm.linux.org.uk
[PATCH] NX: Fix noexec kernel parameter
noexec_setup runs too late to take any effect, so parse it earlier.
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.185, 2005-01-03 21:16:56-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: SCLP device driver cleanup
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
sclp: core driver cleanup
Details:
- moved signal shutdown (quiesce) handling into a separate file
- cleanup of SCLP core driver:
. introduced driver states instead of bits
. introduced request retry count and retry limit
. sclp_add_request now returns an error code if a request couldn't be started
. introduced separate request structure for init_mask requests to simplify
code
. request timer is now manually checked in sclp_sync_wait because timer
interrupts are disabled in this context
. removed busy timer - request timer now handles both cases
. split up sclp_start_request into __sclp_start_request and sclp_process
queue
. removed sclp_error_message (unused)
. introduced sclp_check_handler function to split up initial init mask
test from standard init mask request processing
. introduced sclp_deactivate and sclp_reactivate for simplified reboot
event handling (and potential use in suspend/resume scenario)
. added protection against multiple concurrent init mask calls
- minor changes in SCLP core driver:
. updated comments
. renamed functions to be consistent with "function name starts with __ =>
needs lock"
. renamed internal functions for consistency reasons
. introduced inlined helper functions to simplify code
. moved EXPORT_SYMBOL definitions next to function definition
- changes in sclp console driver
. removed callback recursion to prevent stack overflow
- changes to CPI module
. added check for sclp_add_request return code
. changed printks to specify a message level
- changes to generic sclp tty layer
. removed timed buffer retry after error (timers may not work in some
situations)
. introduced return code for sclp_emit_buffer
- changes to sclp tty driver
. removed callback recursion
- changes to sclp vt220 driver
. removed callback recursion
. removed timed buffer retry after error
- modified sclp_init_mask to prevent problems with some compiler versions
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.184, 2005-01-03 21:16:43-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: DCSS driver cleanup fix
From: Carsten Otte <cotte@de.ibm.com>
- Fix codingstyle.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.183, 2005-01-03 21:16:29-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: Character device drivers
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
From: Stefan Bader <shbader@de.ibm.com>
character device driver changes:
- tape: Correct module count usage.
- 3270: Use mod_timer only when timer is pending.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.182, 2005-01-03 21:16:16-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: DASD driver
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
dasd driver changes:
- Modify format analysis routine to use block size provided by on-disk label.
- Search data structures when referencing use_diag/ro attribute values.
- Correct return code checking when allocating memory.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.181, 2005-01-03 21:16:02-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: Network device driver patches
From: Ursula Braun-Krahl <braunu@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>
From: Thomas Spatzier <tspat@de.ibm.com>
From: Frank Pavlic <pavlic@de.ibm.com>
- ctc: make sysfs attribute buffer early available.
- ctc: remove memory leak for channel ccw struct.
- qeth: remove redundant info card->info.ifname.
- qeth: enable recovery with retries in qeth_hardsetup_card after unit check.
- qeth: do not allow to set layer2 attribute on IQD devices.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.180, 2005-01-03 21:15:47-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: Common I/O layer
From: Cornelia Huck <cohuck@de.ibm.com>
common i/o layer changes:
- Cope with changed cdev->handler.
- Split clearing of subchannels from reipl function and declare it in header.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.179, 2005-01-03 21:15:33-08:00, heiko.carstens@de.ibm.com
[PATCH] s390: core patches
s390 core changes:
- Disable pfault pseudo page faults before stopping a cpu.
- Add exception table for diag10 instruction.
- Move initialization of active_mm of idle task to smp_create_idle.
- Regenerate default configuration.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.178, 2005-01-03 21:15:20-08:00, schwidefsky@de.ibm.com
[PATCH] s390: remove compat setup_arg_pages32
Remove the s390 version of setup_arg_pages32 function and use the generic
setup_arg_pages function instead.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.177, 2005-01-03 21:15:06-08:00, kraxel@bytesex.org
[PATCH] uml: sysfs support for the uml block devices.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.176, 2005-01-03 21:14:52-08:00, kraxel@bytesex.org
[PATCH] uml: sysfs support for uml network driver.
Add sysfs support to the uml network driver. Also comment the eth_init
function, I think that one is never ever needed as the devices are initialized
when the underlying transport mechanism registeres.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.175, 2005-01-03 21:14:36-08:00, kraxel@bytesex.org
[PATCH] uml: raise tty limit
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.174, 2005-01-03 21:14:23-08:00, kraxel@bytesex.org
[PATCH] uml: fix umldir init order
Fixup initialization order when creating the $HOME/.uml/<umid> directory and
the files therein, also make the error messages more useful.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.173, 2005-01-03 21:14:09-08:00, kraxel@bytesex.org
[PATCH] uml: symbol export
export a missing symbol, IIRC xfs needs that one.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.172, 2005-01-03 21:13:54-08:00, jdike@addtoit.com
[PATCH] uml: Fix highmem compilation
Remove a reference to an unused variable.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.171, 2005-01-03 21:13:41-08:00, jdike@addtoit.com
[PATCH] uml: Remove bogus __NR_sigreturn check
Before Bodo's signal fixes and my signal delivery rework, it was possible for
a process to execute UML code by running the default signal restorer. This
is no longer possible, so this check can be removed from the sanity test for
UML accidentally tracing itself.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.170, 2005-01-03 21:13:28-08:00, jdike@addtoit.com
[PATCH] uml: declare ptrace_setfpregs
Add a declaration for ptrace_setfpregs
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.169, 2005-01-03 21:13:13-08:00, jdike@addtoit.com
[PATCH] uml: use SYSEMU_SINGLESTEP
This implements using the new ptrace option SYSEMU_SINGLESTEP in UML
(advanced sysemu) in SKAS and TT modes.
To have a fast selection of the appropriate ptrace option to use next,
a 2 dimensional arry is used and singlestepping() is modified to return
0,1 or 2:
0 = don't do singlestepping
1 = singlestep a syscall
2 = singlestep a "non syscall" instruction
In do_syscall() writing of the syscall number is supressed, if the
advanced sysemu is in use (that does it itself).
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.168, 2005-01-03 21:12:59-08:00, jdike@addtoit.com
[PATCH] uml: detect SYSEMU_SINGLESTEP
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
This implements checking for the new ptrace option SYSEMU_SINGLESTEP
(advanced sysemu) and allows the values 0,1,2 for /proc/sysemu,
if advanced sysemu is available:
0 = don't use sysemu
1 = use sysemu, but don't use advanced sysemu
2 = use sysemu and advanced sysemu
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.167, 2005-01-03 21:12:43-08:00, jdike@addtoit.com
[PATCH] uml: fix update_process_times call
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
In call to update_process_times() set parameter user
correctly. (was from for SKAS).
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.166, 2005-01-03 21:12:30-08:00, jdike@addtoit.com
[PATCH] uml: correctly restore extramask in sigreturn
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Restoring of current->blocked in sys_sigreturn is wrong.
The first (long ) of the mask correctly is fetched from sc->oldmask.
The further longs again come from there, but correctly should be
taken from frame->extramask.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.165, 2005-01-03 21:12:17-08:00, jdike@addtoit.com
[PATCH] uml: SYSEMU fixes
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Usage of SYSEMU in TT mode is modified, so that always the
same method is used in do_syscall as has been used before in
ptrace(PTRACE_SYSCALL/SYSEMU, ...)
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.164, 2005-01-03 21:12:04-08:00, jdike@addtoit.com
[PATCH] uml: Allow vsyscall code to build on 2.4
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
This patch fixes compilation on 2.4 hosts by not relying on macros from 2.6
host kernel headers in one userspace file. It's about AT_SYSINFO_* macros.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.163, 2005-01-03 21:11:51-08:00, jdike@addtoit.com
[PATCH] uml: Fix setting of TIF_SIGPENDING
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
My older patch, that sets TIF_SIGPENDING after an ptrace-interception
in syscall_trace() is wrong.
Some syscalls want to be called without any signal pending. If a signal
is pending on syscall-entry, they immediately return with -ERESTARTNOINTR.
Thus, on return to user, the pending signals can be processed and the
kernel will lower eip by 2 to have the syscall restarted after that.
Since my change sets TIF_SIGPENDING on the entry and exit interception,
stracing such a syscall looped! Try "strace ls" to see what happens.
Fix: set TIF_SIGPENDING on the exit interception only. This avoids the
loop and is enough for security.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.162, 2005-01-03 21:11:38-08:00, jdike@addtoit.com
[PATCH] uml: system call restart fixes
From: Bodo Stroesser
The implementation of sys_sigreturn() and sys_rt_sigreturn() in UML
must be changed.
This is necessary, since the return value of sys_*_sigreturn()
is the value of eax in the thread, that was interrupted by the
signal handler. If accidentaly eax contains -ERESTART_*, orig_eax
*must* be -1 to avoid syscall restart processing in kern_do_signal().
If orig_eax is >=0, eip might be lowered by 2, the process will fail.
In UML PT_REGS_SYSCALL_NR() or UPT_SYSCALL_NR() have to be used
instead of orig_eax.
While writing and testing an exploit for this, I saw that for most
interrupts, the syscall number is undefined. So even on a return from
interrupt a wrong syscall restart handling could happen.
And also: UML resumes a process with ptrace(PTRACE_SYSCALL/SYSEMU/SINGLESTEP
when a syscall in UML in SKAS mode has been processed. But since there
is a valid syscall number in the host's orig_eax, the host could do
a wrong syscall restarting if the syscall in UML was a sigreturn() returning
-ERESTART* To avoid this, in SKAS -1 should be written to regs.orig_eax
before restore_registers().
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.161, 2005-01-03 21:11:23-08:00, jdike@addtoit.com
[PATCH] uml: export end_iomem
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
some modules need end_iomem to be exported.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.160, 2005-01-03 21:11:10-08:00, jdike@addtoit.com
[PATCH] uml: small vsyscall fixes
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
As Jeff pointed out, the check for address wrapping in access_ok_skas
was wrong. Also, change vsyscall_ehdr and vsyscall_end to be
unsigned long and export them, since modules need them for access_ok_skas
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.159, 2005-01-03 21:10:59-08:00, jdike@addtoit.com
[PATCH] uml: defconfig update
Update defconfig for 2.6.10-rc2-mm4.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.158, 2005-01-03 21:10:46-08:00, jdike@addtoit.com
[PATCH] uml: kill host processes properly
This patch changes how UML kills ptraced processes in order to be more
correct in the presence of the ptrace changes in 2.6.9. It used to be that
ptrace stopped processes could simply be killed and they would go away. Now,
there's a new run state for ptraced processes which doesn't receive signals
until they are PTRACE_KILLed or PTRACE_CONTinued. So, this patch kills the
process, as usual, then PTRACE_KILL and PTRACE_CONT. This is done in
os_kill_ptrace_process() for use from skas mode, and in tracer() when it
sees a child process getting a SIGKILL.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.157, 2005-01-03 21:10:34-08:00, jdike@addtoit.com
[PATCH] uml: Add TRACESYSGOOD support
From: Bodo Stroesser
Patch 1/3 to implement usage of PTRACE_O_TRACESYSGOOD
This is necessary, to fix UMLs bad behavior when a process does
a systemcall with syscall-number less than 0.
Insert a check for availability and function of
ptrace(PTRACE_SETOPTIONS,,,PTRACE_O_TRACESYSGOOD)
into the normal ptrace checks at startup.
Patch 2/3 to implement usage of PTRACE_O_TRACESYSGOOD
This is necessary, to fix UMLs bad behavior when a process does
a systemcall with syscall-number less than 0.
This patch makes SKAS-mode use PTRACE_O_TRACESYSGOOD and fixes
the problems in SKAS.
Patch 3/3 to implement usage of PTRACE_O_TRACESYSGOOD
This is necessary, to fix UMLs bad behavior when a process does
a systemcall with syscall-number less than 0.
This patch makes TT-mode use PTRACE_O_TRACESYSGOOD and fixes
the problems in TT.
I'm not quite sure, that this patch doesn't cause problems with
debugger usage. It should be testet by someone, who has more
know how about TT-mode debugger.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.156, 2005-01-03 21:10:21-08:00, jdike@addtoit.com
[PATCH] uml: include vsyscall page in core dumps
From: Bodo Stroesser
Complete the dump with the vsyscall-information, if a vsyscall-page
is available.
Signed-off-by: Bodo Stroesser <bodo.stroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.155, 2005-01-03 21:10:08-08:00, jdike@addtoit.com
[PATCH] uml: make vsyscall page into process page tables
From: Bodo Stroesser
To make the vsyscall-page available for copy_from_user() and
ptrace(), we should use kernel's "gate-vma" mechanism.
Therefore we need a valid page structure. To have this, one
page (or more) is allocated at boot time, the contents of the
vsyscall-page is copied into this page and the page's pte is
inserted in swapper's pagetables.
Now it will be copied into the pagetables of all processes.
Note: this alone doesn't work, since FIXADDR_USER_START and
FIXADDR_USER_END are not yet defined correctly. Also
access_ok_skas() does not yet grant read accesses to
pages not in the normal user area.
Risks:
Please check the first hunk! I don't know, whether this change is OK.
Maybe fixrange_init() is wrong anyway with 3-level-pagetables?
Here access_ok_skas() and FIXADDR_USER_XXXX are fixed.
Now everything should work fine, while the processes are
running. But if a process crashes, the vsyscall-page will
not be dumped.
Signed-off-by: Bodo Stroesser <bodo.stroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.154, 2005-01-03 21:09:55-08:00, jdike@addtoit.com
[PATCH] uml: add elf vsyscall support
From: Bodo Stroesser
This is the first patch of a series of four.
These patches allow the use of sysenter-systemcalls in UML
if the host support sysenter.
Some facts have to be noted:
- the sysenter instruction does not save anything, not even the
return address. Thus the host-kernel builds a stackframe with an
fixed return address for the backjump to the vsyscall-page. All
kernels that support sysenter thus must have a vsyscall-page
- The hosts vsyscall-page is visible in all memory-contexts on the
host, even in those of the processes running on UML. This cannot
be changed.
So the best way to implement sysenter is to integrate the host's
vsyscall-page into UML, if available.
This patch creates a new source file containing an UML
initialization function. The function scans the Elf-auxiliary vector
that is prepared by the host for relevant information about:
- vsyscall elf-header
- vsyscall entry
- machine type (called "platform", e.g. "i586" or "i686")
- hardware capabilities
These informations are inserted into the Elf-auxiliary-vector that is
generated if an UML process calls "execXX()". If the information from
the auxiliray-vector is not complete, UML uses the previos default
values, with one exception: if the host has no vsyscall-page, UML now
does no longer insert AT_SYSINFO or AT_SYSINFO_EHDR elements. (I think,
that's better than writing dummies)
Since the host's vsyscall-page is always visible to UML processes, this
change is enough to let UML with an i686-compiled glibc use sysenter.
what's missing:
- is_syscall() in SKAS cannot access the code in the vsyscall-page via
copy_from_user(), thus singlesteppers still could break out. (Note:
that's not new, if someone jumps willingly to the sysenter-entry in
the vsyscall-page, he can do that without the patch, too).
- a debugger cannot access the code in the vsyscall-page via
ptrace( PEEKTEXT, ...)
Risks:
could there by any feature of the host's processor, that is indicated in
the hardware capabilities, but must not be used in UML?
Signed-off-by: Bodo Stroesser <bodo.stroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.153, 2005-01-03 21:09:42-08:00, blaisorblade_spam@yahoo.it
[PATCH] uml: finish fixing run_helper failure path
Fix some bugs left in the failure path of run_helper by the previous patch:
it was missing one
os_close_file(fds[1])
which is conditional. To use the goto handling model, I set the fd to -1
if it's already closed (I don't want to check if keeping one more pipe-end
open is no problem).
Also do some cosmethic cleanup:
* "err" was what we returned even on success, so just use a neutral "ret".
* use tabs, not spaces.
* a little more comments.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.152, 2005-01-03 21:09:29-08:00, blaisorblade_spam@yahoo.it
[PATCH] Uml: first part rework of run_helper() and users.
With Jeff Dike <jdike@addtoit.com>,
Fixed a file descriptor leak in the network driver when changing an IP
address.
Fixed the error handling in run_helper.
Paolo notes:
Actually, this is part one of the change, the exact one extracted from Jeff
Dike's incrementals tree before 2.6.9-rc big UML merge.
There is some changes must be done, so I'm also sending a second patch with
this one, too. Separated for tracking purposes.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.151, 2005-01-03 21:09:16-08:00, kraxel@bytesex.org
[PATCH] uml: terminal cleanup
This is a major cleanup of the uml terminal drivers and console handling
(console as in "where the kernel messages go to", not as in "linux
virtual terminals"). The changes in detail:
(1) There is a new console driver calles "stderr" which (as the name
implies) simply dumps all kernel messages to stderr. That one
is registered very early in the boot process via console_initcall()
and will print every almost kernel message instantly: Both very
early in the boot process and very late in shutdown.
Note that this is not enabled by default, see below for details.
(2) Ditched the early-console-init hackery in stdio_console.c
(open_console(NULL) + related stuff) into the waste basket, not
needed any more as you can use the new stderr console driver to
get the kernel messages if your kernel crashes very early in the
boot process.
(3) Handle console initialitation for the uml stdio console and
virtual serial lines the normal way using the console->setup()
function. Now all kernel messages appear on your console device
once it is initialized without any dirty tricks.
(4) The (2) changes allow a number of further cleanups: As we don't
open a line without a tty_struct any more we can ...
* hook struct line into tty->driver_data
* pass around tty_struct instead of struct line everythere
* get rid of some trivial wrappers in ssl.c and stdio_console.c
because we can get struct line via tty_struct all the time now.
(5) Change the ordering in the arch/um/drivers/Makefile and thus
the link and initialization order to make sure the stdio console
and not the virtual serial line is the default console device.
(6) Fixed a number of Documentation/CodingStyle issues within the
code (not systematically, but usually just the places I was
touching anyway or where it bugged me while browsing the code
because it was hard to read).
Looks like that cleanup also fixed some strange tty issues I've seen in
the past (like console getty not responding to input sometimes, suse's
/sbin/blogd causing trouble).
Finally some usage notes for using the new stderr console:
If the stderr console is enabled, then it is the default console device
because it registeres very early in the boot process. But as it isn't
linked to a tty device this makes init unhappy, you'll see "can't open
initial console" error messages. Because you usually don't want that
the stderr console is turned off by default. That also maintains the
behavior that /dev/tty0 is the first console device registered and thus
the default console.
There are basically two useful use cases for the stderr console:
(1) Your kernel dies before the normal console device is initialized
and thus you don't see any messages. Just enable the stderr
console to see them by adding "stderr=1" to the kernel command line.
(2) You want to have the kernel messages on both stderr and your
console terminal device. Try something like this:
$ ./linux stderr=1 console=stderr console=ttyS0 ssl0=xterm
This example sets up the console on a virtual serial line and
pops up an xterm for that.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.150, 2005-01-03 21:09:02-08:00, blaisorblade_spam@yahoo.it
[PATCH] hostfs: uml: add some other pagecache methods
This is a follow-up to my previous "hostfs - uml: set .sendfile to
generic_file_sendfile" patch. I was asking whether other methods should have
been added, and comparing with ext3 I found some more ones.
However, I have not specific clues about them: I know they use the pagecache,
which relies on *page methods, which are defined by hostfs. So I think it
could work.
I have a doubt, whether hostfs needs the commented out method below:
static struct address_space_operations hostfs_aops = {
.writepage = hostfs_writepage,
.readpage = hostfs_readpage,
/* .set_page_dirty = __set_page_dirty_nobuffers, */
.prepare_write = hostfs_prepare_write,
.commit_write = hostfs_commit_write
};
Hostfs does not have a underlying device (and I have some rough idea that
buffers cache block devices data), so I wonder if that is needed or not.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.149, 2005-01-03 21:08:49-08:00, blaisorblade_spam@yahoo.it
[PATCH] hostfs: uml: set .sendfile to generic_file_sendfile
Make hostfs use the generic sendfile implementation.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.148, 2005-01-03 21:08:33-08:00, jdike@addtoit.com
[PATCH] uml: unregister signal handlers at reboot
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
In most cases reboot failed on my system. After "Restarting system.", UML
exited without further messages. I found an SIGIO being processed by
sig_handler() resp. sig_handler_common_skas(). Don't know, why this exits,
maybe the context is no longer valid at this time. So, I changed the sequence
in the reboot part of main() to stop the timers and disable the fds before
unblocking the signals. Since this wasn't enough, I also added
set_handler(SIGXXX, SIG_IGN) calls to disable_timer() and
deactivate_all_fds(). Now reboot works fine in SKAS and it still works in TT.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.147, 2005-01-03 21:08:20-08:00, jdike@addtoit.com
[PATCH] uml: free host resources associated with freed IRQs
This adds a free_irq_by_irq_and_dev call which was accidentally removed when
the UML free_irq was replaced by generic code.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.146, 2005-01-03 21:08:05-08:00, jdike@addtoit.com
[PATCH] uml: close host file descriptors properly
This process closes some file descriptors which were left open incorrectly.
These are the initrd descriptor, the temporary test file used for testing /tmp
for execution permission, and a descriptor used by the netork to connect to
the switch. In the network case, we add network devices to the opened list as
soon as they are added to UML, rather than when they are configured. This
ensures that close_devices will remove the device properly on shutdown.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.145, 2005-01-03 21:07:51-08:00, jdike@addtoit.com
[PATCH] uml: fix sigreturn to not copy_user under a spinlock
Fix sys_sigreturn and sys_rt_sigreturn to avoid calling copy_from_user inside
a spinlock. We copy the blocked signal mask into a local sigset_t before the
spinlock and then just assign from it inside the lock.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.144, 2005-01-03 21:07:36-08:00, jdike@addtoit.com
[PATCH] uml: remove a quilt-induced duplicity
This piece appears to have gone in twice.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.143, 2005-01-03 21:07:23-08:00, jdike@addtoit.com
[PATCH] uml: unistd.h cleanup
From: Chris Wedgewood: this removes unnecessary cruft from unistd.h
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.142, 2005-01-03 21:07:08-08:00, jdike@addtoit.com
[PATCH] uml: make restorer match i386
From: Bodo Stroesser
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.141, 2005-01-03 21:06:56-08:00, jdike@addtoit.com
[PATCH] uml: redo the signal delivery mechanism
This patch rips out the old signal delivery mechanism and replaces it with a
sane one.
Specifically, UML used to capture a host signal frame and use it as a template
for its own signal frames. This was a worthy idea, because it promised a
degree of architecture-independence for this part of UML, but impractical.
There are some environments, notably 32 bit emulation on a 64 bit box, where
you can't use the host signal frame as a template for your own. Plus, this
code is as complicated, even to someone who understands what it's doing, as
the standard fill-in-a-structure-and-write-it-to-the-stack. For everyone
else, it is incomprehensible.
So, this reimplements signal handling in the way that everyone else does. It
gives up on architecture independence, and moves this code into the
x86-specific stuff.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.140, 2005-01-03 21:05:26-08:00, blaisorblade_spam@yahoo.it
[PATCH] uml: fix some ptrace functions returns values
From: Jeff Dike <jdike@addtoit.com>
This patch adds ptrace_setfpregs and makes these functions return -errno on
failure.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.139, 2005-01-03 21:05:13-08:00, blaisorblade_spam@yahoo.it
[PATCH] uml: fix __wrap_free comment
Reworded the comment about __wrap_free detection of the allocator used to
allocate the pointer (it can free a pointer created by either the host
malloc(), kmalloc() or vmalloc()).
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.138, 2005-01-03 21:05:00-08:00, blaisorblade_spam@yahoo.it
[PATCH] uml: remove most devfs_mk_symlink calls
Remove uses of devfs_mk_symlink().
We didn't do this before to avoid breaking most user setups, but this patch
should be quite harmless.
I've excluded the hottest part, i.e. the ubd symlink, while removing the
other; I released a end-user tree with this patch and there was a good number
of people using the symlink rather than the preferred name. That part will be
merged later, I think.
Since now we have evidence of less and less users using devfs, we think that
it will not cause too much problems.
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.137, 2005-01-03 21:04:47-08:00, takata@linux-m32r.org
[PATCH] m32r: Update include/asm-m32r/mmu_context.h
This patch updates include/asm-m32r/mmu_context.h.
* include/asm-m32r/mmu_context.h:
- Add #ifdef __KERNEL__
- Change __inline__ to inline for __KERNEL__ portion.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.136, 2005-01-03 21:04:34-08:00, takata@linux-m32r.org
[PATCH] m32r: Update include/asm-m32r/system.h
This patch updates include/asm-m32r/system.h.
* include/asm-m32r/system.h:
- Use barrier() as mb().
- Change __inline__ to inline.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.135, 2005-01-03 21:04:21-08:00, takata@linux-m32r.org
[PATCH] m32r: Use generic hardirq framework
This patch is for employing the generic hardirq framework for m32r.
Now CONFIG_GENERIC_HARDIRQS is set to Y by default.
- Update to use GENERIC_HARDIRQ framework.
- Fix PREEMPT_ACTIVE definition (changeset 1.2000.16.20)
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.134, 2005-01-03 21:04:08-08:00, takata@linux-m32r.org
[PATCH] m32r: Make kernel headers for mutual exclusion
Here is a patch to update kernel headers for mutual exclusion,
atomic.h, bitops.h and semaphore.h of m32r.
This patch is for making these headers publishable to userland.
* include/asm-m32r/assembler.h (M32R_LOCK, M32R_UNLOCK):
Define M32R_LOCK and M32R_UNLOCK macros. For SMP configuration,
these macros are expanded to m32r's LOCK and UNLOCK instructions.
While, for UP configuration, these are simply expanded to m32r's
LD(load) and ST(store) instructions, respectively.
* include/asm-m32r/atomic.h, include/asm-m32r/bitops.h,
include/asm-m32r/semaphore.h:
- Change macros from LOAD and STORE to M32R_LOCK and M32R_UNLOCK,
respectively. It is because LOAD and STORE are too generic words.
- Change inline to __inline__.
Retrieve __inline__ modifiers for functions which are placed
outside of __KERNEL__ region in these headers, because those
functions might be included and used from ISO C program in
userland.
Currently, it seems that these headers are allowed to be included from
userland. Indeed, they are kernel stuff, but these headers provide
useful definitions and functions even for userland applications, I think.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.133, 2005-01-03 21:03:55-08:00, takata@linux-m32r.org
[PATCH] m32r: Use kmalloc for m32r stacks
- Use kmalloc for m32r stacks (cf. changeset 1.1046.533.10)
- Update for CONFIG_DEBUG_STACK_USAGE
This modification was taken from include/asm-i386/thread_info.h.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.132, 2005-01-03 21:03:42-08:00, takata@linux-m32r.org
[PATCH] m32r: include/asm-m32r/thread_info.h minor updates
- Use THREAD_SIZE for __ASSEMBLY__ portion.
- Update comments.
- Fix a typo: user-thead --> user-thread.
NOTE: Now there are two THREAD_SIZE definitions in the following patch,
one is in C part and the other is in __ASSEMBLY__ part.
I'm going to consolidate these THREAD_SIZE definitions. So, I have to
change PAGE_SIZE definition of include/asm-m32r/page.h to be includable
into asm portion...
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.131, 2005-01-03 21:03:29-08:00, takata@linux-m32r.org
[PATCH] m32r: Clean up include/asm-m32r/pgtable-2level.h
- Add #ifdef __KERNEL__
- Change __inline__ to inline for __KERNEL__ portion.
- Remove RCS ID string.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.130, 2005-01-03 21:03:16-08:00, takata@linux-m32r.org
[PATCH] m32r: Remove PAGE_USER
- Remove _PAGE_USER bit from pte.
- The m32r doesn't support _PAGE_USER bit by hardware.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.129, 2005-01-03 21:03:04-08:00, takata@linux-m32r.org
[PATCH] m32r: Support PAGE_NONE
- Support PAGE_NONE attribute for memory protection.
- Add _PAGE_PROTNONE bit to pte (software bit).
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.128, 2005-01-03 21:02:51-08:00, takata@linux-m32r.org
[PATCH] m32r: Clean up include/asm-m32r/pgtable.h
- Change PAGE_*_X to PAGE_*_EXEC for good readability.
- Add #include __KERNEL__
- Change __inline__ to inline for the __KERNEL__ portion.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.127, 2005-01-03 21:02:38-08:00, takata@linux-m32r.org
[PATCH] m32r: Clean up arch/m32r/mm/fault.c
- Fix a typo: ACE_USEMODE --> ACE_USERMODE.
- Update copyright statement, and so on.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.126, 2005-01-03 21:02:25-08:00, takata@linux-m32r.org
[PATCH] m32r: Don't encode ACE_INSTRUCTION in address
- To be more comprehensive, keep ACE_INSTRUCTION (access exception
on instruction execution) information in thread_info->flags,
instead of encoding it into address parameter.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.125, 2005-01-03 21:02:12-08:00, takata@linux-m32r.org
[PATCH] m32r: Cause SIGSEGV for nonexec page execution
- Cause a segmentation fault for an illegal execution of a code on
non-executable memory page.
Signed-off-by: Naoto Sugai <sugai@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.124, 2005-01-03 21:01:59-08:00, takata@linux-m32r.org
[PATCH] m32r: Update ptrace.c for multithread debugging
This patch updates ptrace.c to support multithread debugging. So far, only
one breakpoint's location was kept by kernel, however, in the multithreaded
application's debug, it is required to kept multi-point breakpoint locations
by kernel.
In this implementation, maximum number of MAX_TRAPS(=10 (by default))
breakpoint's information will be kept in the "debug_trap" member of the
thread_struct for each thread.
* include/asm-m32r/processor.h:
Modify debug_trap struct to keep multipoint breakpoint locations
for multithread debugging.
* arch/m32r/kernel/ptrace.c:
- Update to support multithread debugging.
- Remove unused functions, withdraw_debug_trap_for_signal() and
embed_debug_trap_for_signal().
Signed-off-by: Kei Sakamoto <ksakamot@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.123, 2005-01-03 21:01:46-08:00, takata@linux-m32r.org
[PATCH] m32r: Support pgprot_noncached()
This patch updates include/asm-m32r/pgtable.h to add pgprot_noncached().
It is required to fix a problem of an userspace application, which mmaps
io registers.
This patch also modifies drivers/video/fbmem.c to support noncachable
framebuffer access for m32r.
In this routine, pgprot_writecombine() is used hopefully, even though
the current m32r never does write-combining or write-coalescing...
Please apply this.
* include/asm-m32r/pgtable.h
(pgprot_noncached, pgprot_writecombine): Newly added.
* drivers/video/fbmem.c (fb_mmap): Add m32r support.
Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.122, 2005-01-03 21:01:33-08:00, takata@linux-m32r.org
[PATCH] m32r: Add new relocation types to elf.h
include/asm-m32r/elf.h:
Add relocations R_M32R_GOTOFF_HI_ULO, R_M32R_GOTOFF_HI_SLO, and
R_M32R_GOTOFF_LO. These relocations are required to implement GOTOFF
support for m32r.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.121, 2005-01-03 21:01:20-08:00, akpm@osdl.org
[PATCH] swsusp-try_to_freeze-to-make-freezing-hooks-nicer fix
In file included from include/linux/ptrace.h:77,
from arch/ppc64/lib/sstep.c:12:
include/linux/sched.h: In function `freeze_processes':
include/linux/sched.h:1189: warning: no return statement in function returning non-void
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.120, 2005-01-03 21:01:05-08:00, pavel@ucw.cz
[PATCH] swsusp: try_to_freeze to make freezing hooks nicer
This moves refrigerator changes to sched.h, so that every file user of
refrigerator does not have to include suspend.h, and makes refrigerator
support easier by introducing try_to_freeze.
Adapted from patch by Nigel Cunningham
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.119, 2005-01-03 21:00:51-08:00, pavel@ucw.cz
[PATCH] swsusp: Kill O(n^2) algorithm in swsusp
Some machines are spending minutes of CPU time during suspend in stupid O(n^2)
algorithm. This patch replaces it with O(n) algorithm, making swsusp usable
to some people.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.118, 2005-01-03 21:00:38-08:00, pavel@ucw.cz
[PATCH] swsusp: Small cleanups
This adds statics at few places and fixes stale references to pmdisk.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.117, 2005-01-03 21:00:25-08:00, pavel@ucw.cz
[PATCH] swsusp: kill one-line helpers, handle read errors
swsusp contains few one-line helpers that only make reading/understanding code
more difficult. Also warn the user when something goes wrong, instead of
waking machine with corrupt data.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.116, 2005-01-03 21:00:12-08:00, pavel@ucw.cz
[PATCH] swsusp: kill unused variable
Variable used only for writing is bad idea.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.115, 2005-01-03 20:59:56-08:00, pavel@ucw.cz
[PATCH] fix naming in swsusp
At few points we still reference to swsusp as "pmdisk"... it might confuse
someone not knowing full history.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.114, 2005-01-03 20:59:43-08:00, rmk+lkml@arm.linux.org.uk
[PATCH] typeof(dev->power.saved_state)
arch/arm/common/sa1111.c: In function `sa1111_suspend':
arch/arm/common/sa1111.c:816: warning: assignment from incompatible pointer type
This is a rather annoying, and IMHO pointless warning. First question:
what is the reasoning for using an array of unsigned bytes here? Are we
expecting to power manage devices which only have byte wide registers?
In reality, devices have half-word and word sized registers as well, which
means that dev->power.saved_state actually points to device specific data
(or even device driver specific data) for the device. As such, it makes
far more sense for this to be a 'void *'.
I'd rather not go around the ARM kernel tree adding pointless casts to 'u8
*' and back again because the wrong type for this was picked in the
structure definition, so here's a patch which changes this to void *.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.113, 2005-01-03 20:59:29-08:00, bjorn.helgaas@hp.com
[PATCH] ia64: remove HCDP support for early printk
This is only used by the ia64 early_printk patch, which isn't in the
mainline tree. If anybody is still using that patch, hcdp_early_uart()
should be incorporated into it.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.112, 2005-01-03 20:59:13-08:00, spyro@f2s.com
[PATCH] arm26: better unistd.h (reimplemented based on arm32)
Some long overdue updates to this file. newer macros taken from arm32.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.111, 2005-01-03 20:59:00-08:00, spyro@f2s.com
[PATCH] arm26: better put_user macros.
Better put_user macro.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.110, 2005-01-03 20:58:49-08:00, spyro@f2s.com
[PATCH] arm26: TLB update
A keep-it-compiling patch based on the arm32 code.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.109, 2005-01-03 20:58:33-08:00, spyro@f2s.com
[PATCH] arm26: replace arm32 time handling code with smaller version
ARM26 systems only have one possible clock, thus we can merge all this into
one source file and drop the ability to dynamically alter it.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.108, 2005-01-03 20:58:20-08:00, spyro@f2s.com
[PATCH] arm26: update system.h to some semblance of recentness.
The arm26 version of this had become horribly out of date. this is a
sideways-port of the arm32 version, dropping the unwanted stuff and adjusted
for arm26 compatability.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.107, 2005-01-03 20:58:07-08:00, spyro@f2s.com
[PATCH] arm26: softirq update
New irq exit handler (part of the softirq changes)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.106, 2005-01-03 20:57:54-08:00, spyro@f2s.com
[PATCH] arm26: remove shark (arm32) from arm26
Drop shark support from arm26 (shark isn't arm26 based)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.105, 2005-01-03 20:57:41-08:00, spyro@f2s.com
[PATCH] arm26: move some files to better locations
This diff effects a restructuring of arm26s directory layout. A number of
files can now move to more logical locations, since there are no machine
specific directories anymore.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.104, 2005-01-03 20:51:11-08:00, spyro@f2s.com
[PATCH] arm26: new execve code
This pulls in the execve changes made in arm32.
Also, drops some old arm32 power management stuff thats no longer relevant
in process.c.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.103, 2005-01-03 20:50:56-08:00, spyro@f2s.com
[PATCH] arm26:cleanup trap handling assembly
This removes some unneeded definitions and makes the naming used within the
file more consistent.
Also adds some macros to make it easier to see how the interrupt handler is
structured.
The assembled output is identical to the original.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.102, 2005-01-03 20:50:42-08:00, spyro@f2s.com
[PATCH] arm26: necessary compilation fixes for 2.6.10
Various trivial fixes required to get a clean compile.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.101, 2005-01-03 20:50:29-08:00, spyro@f2s.com
[PATCH] arm26: update comments, headers, notes
Add and update comments all throughout the arm26 tree.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.100, 2005-01-03 20:50:15-08:00, spyro@f2s.com
[PATCH] arm26 build system updates
- Updates to makefiles required by the other changes in this patchset.
- Also add some entries to the linker scripts. The linker scripts really
ought to be merged into one script but that will have to wait.
- Add a comment for building xipImages Update the compiler flags used to
build arm26 so gcc 3.4 doesnt barf.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.99, 2005-01-03 20:49:59-08:00, spyro@f2s.com
[PATCH] arm26: update the atomic ops
Replace the macros for atomic ops and bring arm26 up to current definitions.
make the arm26 mm code use the proper macros also.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.98, 2005-01-03 20:49:46-08:00, spyro@f2s.com
[PATCH] arm26: remove arm32 cruft
This patch drops some more stuff left over from the old combined arm26/32
architecture.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.97, 2005-01-03 20:49:33-08:00, ysato@users.sourceforge.jp
[PATCH] H8/300 new systemcall support
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.96, 2005-01-03 20:49:20-08:00, ak@suse.de
[PATCH] x86_64: Eliminate some useless printks in ACPI numa.c
Eliminate some useless printks in ACPI numa.c
They trigger all the time on x86-64 with CONFIG_ACPI_NUMA
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.95, 2005-01-03 20:49:07-08:00, ak@suse.de
[PATCH] x86_64: Add x86_64 support for Jack Steiner's SLIT sysfs patch
Add x86_64 support for Jack Steiner's SLIT sysfs patch
Make Jack's code compile on x86-64 and add x86-64 low level support to save
the SLIT pointer and a node_distance() implementation.
Requires the previous SRAT patch.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.94, 2005-01-03 20:48:54-08:00, ak@suse.de
[PATCH] x86_64: Add SLIT (inter node distance) information to sysfs.
Add SLIT (inter node distance) information to sysfs.
[This is Jack's patch that he submitted on l-k. I'm submitting
it for him because I need it for my x86-64 followon SLIT patch.
Hope I don't stomp onto his toes with that one. If you already
merged it please ignore]
From: Jack Steiner
Here is an update patch to externalize the SLIT information. I think I have
encorporated all the comments that were posted previously)
For example:
# cd /sys/devices/system
# find .
./node
./node/node5
./node/node5/distance
./node/node5/numastat
./node/node5/meminfo
./node/node5/cpumap
# cat ./node/node0/distance
10 20 64 42 42 22
# cat node/*/distance
10 20 64 42 42 22
20 10 42 22 64 84
64 42 10 20 22 42
42 22 20 10 42 62
42 64 22 42 10 20
22 84 42 62 20 10
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.93, 2005-01-03 20:48:43-08:00, ak@suse.de
[PATCH] x86_64: Remove unneeded ifdef in hardirq.h
Remove unneeded ifdef in hardirq.h
I can't see any reason for the #ifdef CONFIG_X86 introduced to the x86_64
hardirq.h as part of the generic irq subsystem changes.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.92, 2005-01-03 20:48:28-08:00, ak@suse.de
[PATCH] x86_64: Fix EM64T config description
Fix EM64T config description
From: Xose Vazquez Perez <xose@wanadoo.es>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.91, 2005-01-03 20:48:15-08:00, ak@suse.de
[PATCH] x86_64: Fix some outdated assumptions that CPU numbers are equal numbers.
Fix some outdated assumptions that CPU numbers are equal numbers.
Depends on the unlimited cpus patch.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.90, 2005-01-03 20:48:03-08:00, ak@suse.de
[PATCH] x86_64: Fix a warning in the CMP support code for !CONFIG_NUMA
Fix a warning in the CMP support code for !CONFIG_NUMA
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.89, 2005-01-03 20:47:50-08:00, ak@suse.de
[PATCH] x86_64: Allow to configure more CPUs and nodes.
Allow to configure more CPUs and nodes.
With clustered mode and AMD's big flat APIC mode there is no reason anymore to
limit the max number of CPUs to 8. Increase the limit to 256 for now, which
is the current APIC limit.
Untested for now.
Also increase the max number of nodes to 64. Remove the MAXNODE define and
replace it with MAX_NUMNODES everywhere or the constant if the hardware limits
the number of nodes.
Also remove some obsolete comments.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.88, 2005-01-03 20:47:37-08:00, ak@suse.de
[PATCH] x86_64: Export phys_proc_id
Export phys_proc_id
This is useful for the powernow-k8 driver which needs to know that two CPUs
share a die.
It cannot use cpu_sibling_map anymore, so this is an alternative.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.87, 2005-01-03 20:47:24-08:00, ak@suse.de
[PATCH] x86_64: Always print segfaults for init.
Always print segfaults for init.
This gives better debugging output when something is really wrong with the
kernel.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.86, 2005-01-03 20:47:11-08:00, ak@suse.de
[PATCH] x86_64: Add a missing newline in /proc/cpuinfo
Add a missing newline in /proc/cpuinfo
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.85, 2005-01-03 20:46:58-08:00, ak@suse.de
[PATCH] x86_64: Add a missing __iomem pointed out by Linus.
Add a missing __iomem pointed out by Linus.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.84, 2005-01-03 20:46:45-08:00, ak@suse.de
[PATCH] x86_64: Scheduler support for AMD CMP
Scheduler support for AMD CMP
AMD dual core looks like HT but isn't really. Hide it from the scheduler.
This works around problems with the domain scheduler. Also probably gives
slightly better scheduling and disables SMT nice which is harmful on dual
core.
We still display it like HT in /proc/cpuinfo. This is to make it appear the
same to license managers so that they count dual cores only as a single
physical CPU.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.83, 2005-01-03 20:46:32-08:00, ak@suse.de
[PATCH] x86_64: Rename HTVALID to CMP_LEGACY
Rename HTVALID to CMP_LEGACY
AMD renamed the HTVALID CPUID flag to CMP_LEGACY and reverted its meaning.
Follow this for /proc/cpuinfo
Needed for the followon CMP patches.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.82, 2005-01-03 20:46:17-08:00, ak@suse.de
[PATCH] x86_64: Remove debug information for vsyscalls
Remove debug information for vsyscalls
This helps gdb apparently because it doesn't like code with debugging
information before other code (?)
Via the kgdb folks.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.81, 2005-01-03 20:46:04-08:00, ak@suse.de
[PATCH] x86_64: Allow a kernel debugger to hide single steps in more cases.
Allow a kernel debugger to hide single steps in more cases.
Apparently helps the kgdb people.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.80, 2005-01-03 20:45:51-08:00, ak@suse.de
[PATCH] x86_64: Update uptime after suspend
Update uptime after suspend
Derived from i386
Adjust jiffies after suspend to keep uptime.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.79, 2005-01-03 20:45:38-08:00, ak@suse.de
[PATCH] x86_64: Add SRAT NUMA discovery to x86-64.
Add SRAT NUMA discovery to x86-64.
Previously the NUMA nodes on Opteron systems were directly read from the
hardware registers of the northbridge.
This version also supports reading it from the more generic ACPI SRAT table.
This allows to support NUMA on all kinds of systems and in general gives more
flexibility, but needs a bit of BIOS support.
This implementation was not done before because the SRAT specification had a
bad license from Microsoft that didn't allow to implement it on other OS. Now
that ACPI 3.0 is released and SRAT is part of it that isn't a concern anymore.
One side effect of this is that holes not described in SRAT (e.g. usually the
640K DOS and 4GB PCI memory holes) will not included in the nodes and won't
get mem_map entries allocated. This may have side effects for some drivers.
Some support for handling dual core AMD CPUs is included.
SLIT parsing is done in a later patch. Depends on earlier patches to split up
the ACPI boot parsing and to add better CMP support on x86-64.
Can be disabled with numa=noacpi
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.78, 2005-01-03 20:45:23-08:00, ak@suse.de
[PATCH] x86_64: Split ACPI boot table parsing
Split ACPI boot table parsing
Split ACPI boot table parsing into two parts. First a acpi_boot_table_init()
call that initializes the basic ACPI table parsing machinery and discovers the
RSDP, and then another call to actually parse the various boot tables.
This is needed for a followon patch that implements SRAT support, because
nodes need to be set up before the other ACPI tables can be parsed.
On x86-64 I moved the early initialization very early because that is needed
for the SRAT parser.
On i386 it should be a nop.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.77, 2005-01-03 20:45:08-08:00, ak@suse.de
[PATCH] x86_64: Handle NX correctly in pageattr
Handle NX correctly in pageattr
Second attempt to try to fix an long standing NX bug in change_page_attr.
Hopefully this version will be better.
The kernel text mapping aliases part of the physical memory and needs its
caching attributes changed too. But when doing this one has to be very
careful to handle the NX bit correctly.
A previous slightly different version of this broke the X server on some RH
systems. I hope this version will be better, but if you have X server
problems please revert this one.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.76, 2005-01-03 20:44:54-08:00, ak@suse.de
[PATCH] x86_64: Collected ioremap fixes
Collected ioremap fixes
- Call change_page_attr correctly
- Fix a race during iounmap
- Handle mmio holes without mem_map correctly (needed for SRAT patch)
- Some cleanups
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.75, 2005-01-03 20:44:39-08:00, ak@suse.de
[PATCH] x86_64: Add reboot=force
Add reboot=force
reboot=force doesn't wait for any other CPUs on reboot. This is useful when
you really need a system to reboot on its own.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.74, 2005-01-03 20:44:26-08:00, ak@suse.de
[PATCH] x86_64: Remove BIOS reboot code
Remove BIOS reboot code
Remove the never quite working BIOS reboot code. This gets rid of a lot of
code.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.73, 2005-01-03 20:44:13-08:00, ak@suse.de
[PATCH] x86_64: Remove duplicated FAKE_STACK_FRAME macro.
Remove duplicated FAKE_STACK_FRAME macro.
FAKE_STACK_FRAME macro is defined twice. The one that gets used is in
arch/x86_64/kernel/entry.S, and is slightly different codewise, although
should have the same end result (uses pushq rather than addq %rsp + movq and
has the extra dwarf annotations).
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.72, 2005-01-03 20:44:00-08:00, ak@suse.de
[PATCH] x86_64: Reenable MGA DRI on x86-64
Reenable MGA DRI on x86-64
Has been reported as working.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.71, 2005-01-03 20:43:47-08:00, pbadari@us.ibm.com
[PATCH] x86_64: numa_add_cpu() fix
Problem is with "c - cpu_data" arthimetic. "c" could be "boot_cpu_data" or
"cpu_data".
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.70, 2005-01-03 20:43:34-08:00, ak@suse.de
[PATCH] x86_64: Fix bugs in the AMD K8 CMP support code.
Fix bugs in the AMD K8 CMP support code.
Check the correct cpuid level and move numa_add_cpu to the correct place.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.69, 2005-01-03 20:43:21-08:00, ak@suse.de
[PATCH] x86_64: Add a real pfn_valid
Add a real pfn_valid
This adds a real pfn_valid. Needed together with the SRAT patch which can
generated memmap less holes for mmio. In general it will help to handle
memory holes better.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.68, 2005-01-03 20:43:08-08:00, prasanna@in.ibm.com
[PATCH] x86_64: do_general_protection() retval check
This patch adds the return value check for the exception notifiers at
do_general_protection as pointed out by Chuck Ebbert.
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.67, 2005-01-03 20:42:52-08:00, zwane@linuxpower.ca
[PATCH] Intel thermal monitor for x86_64
Patch adds support for notification of overheating conditions on intel
x86_64 processors. Tested on EM64T, test booted on AMD64.
Hardware courtesy of Intel Corporation
Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.66, 2005-01-03 20:42:35-08:00, hpa@zytor.com
[PATCH] /proc/sys/kernel/bootloader_type
This patch exports to userspace the boot loader ID which has been exported
by (b)zImage boot loaders since boot protocol version 2.
It is needed so that update tools that update kernels from vendors know which
bootloader file they need to update; eg right now those tools do all kinds of
hairy heuristics to find out if it's grub or lilo or .. that installed the
kernel. Those heuristics are fragile in the presence of more than one
bootloader (which isn't that uncommon in OS upgrade situations).
Tested on i386 and x86-64; as far as I know those are the only
architectures which use zImage/bzImage format.
Signed-Off-By: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.65, 2005-01-03 20:42:19-08:00, hpa@zytor.com
[PATCH] i386 boot loader IDs
This patch adds some i386 boot loader IDs that were used but never
officially recorded as assigned. This makes them nice and official.
Signed-Off-By: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.64, 2005-01-03 20:42:05-08:00, vgoyal@in.ibm.com
[PATCH] Secondary cpus boot-up for non default location built kernels
This patch fixes the problem of secondary cpus not coming up over a reboot.
This problem was seen when a kernel compiled for non default (16MB)
location is booted.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.63, 2005-01-03 20:41:53-08:00, haveblue@us.ibm.com
[PATCH] remove pfn_to_pgdat() on x86
This function is unused on i386.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.62, 2005-01-03 20:41:40-08:00, hpa@zytor.com
[PATCH] Trivial cleanup in arch/i386/kernel/head.S
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.61, 2005-01-03 20:41:26-08:00, zwane@arm.linux.org.uk
[PATCH] NX: Triple fault with 4k kernel mappings and PAE
Booting with NX, CONFIG_X86_PAE and CONFIG_DEBUG_PAGEALLOC or mem=nopentium
triple faults really early during boot as it appears to be tripping over
pages from PAGE_OFFSET -> PAGE_OFFSET + 0x100000 not being marked as
executable.
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.60, 2005-01-03 20:41:13-08:00, zwane@linuxpower.ca
[PATCH] Cyrix MII cpuid returns stale %ecx
This patch is for the following bug, thanks to Ondrej Zary for reporting,
testing and submitting a patch.
http://bugzilla.kernel.org/show_bug.cgi?id=3767
It appears that the Cyrix MII won't touch %ecx at all resulting in stale
data being returned as extended attributes, so clear ecx before issuing the
cpuid. I have also made the capability print code display all the
capability words for easier debugging in future.
Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.59, 2005-01-03 20:41:00-08:00, venkatesh.pallipadi@intel.com
[PATCH] x86: remove data-header and code overlap in boot/setup.S
The setup.S data and code is not cleanly separated. The current space
reserved for setup header is not enough to fit the complete header. As a
result, part of the header (EDDBUF) will overwrite the initial code.
I haven't seen any negative impact of this bug. As, by the time the setup
code is overwritten, we would have finished executing it anyway. But, I
think it is better to separate the header and code and prevent this
data_overwriting_the_code condition.
The atatched patch adds some space in the header to fit all the data listed
in Documentation/i386/zero-page.txt for both i386 and x86_64 (and updates
zero-page.txt).
Signed-off-by:: "Venkatesh Pallipadi" <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.58, 2005-01-03 20:40:47-08:00, mbligh@aracnet.com
[PATCH] Assign PKMAP_BASE dynamically
Badari hit a problem when configuring PAE off (ie CONFIG_4G) where the
pkmap area could end up overlapping the fixmap area. For some reason,
PKMAP_BASE was defined statically, which seems rather pointless, and asking
for trouble. Patch below definines it dynamically, under the fixmap area.
The ordering of the VMALLOC_RESERVE space is:
FIXADDR_TOP
fixed_addresses
FIXADDR_START
temp fixed addresses
FIXADDR_BOOT_START
Persistent kmap area
PKMAP_BASE
VMALLOC_END
Vmalloc area
VMALLOC_START
high_memory
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.57, 2005-01-03 20:40:34-08:00, dhowells@redhat.com
[PATCH] IDE_ARCH_OBSOLETE_INIT fix
The attached patch fixes the IDE driver to initialise correctly in the case
that IDE_ARCH_OBSOLETE_INIT is not defined. Not defining this macro would
seem to be the correct thing to do since it includes the word "obsolete" in
its name.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.56, 2005-01-03 20:40:21-08:00, dhowells@redhat.com
[PATCH] Termio userspace access error handling
The attached patch creates a generic set of termio userspace access functions
with proper error handling. None of the current archs check for errors in
this case.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.55, 2005-01-03 20:40:08-08:00, ananth@in.ibm.com
[PATCH] Kprobes: wrapper to define jprobe.entry
Here is a patch that adds a wrapper for defining jprobe.entry to make
t easy to handle the three dword function descriptors defined by the
PowerPC ELF ABI.
x86, ppc64 and x86_64 are also updated.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.54, 2005-01-03 20:39:55-08:00, david@gibson.dropbear.id.au
[PATCH] ppc64: tweaks to ppc64 cpu sysfs information
Currently the ppc64 sysfs code registers an entry for each possible cpu in
sysfs, rather than just online cpus. That makes sense, since the sysfs
entries are needed to control onlining of the cpus. However, this is done
even if CONFIG_HOTPLUG_CPU is not set, or if it is not a hotplug capable
(DLPAR) machine, which is a bit misleading. Secondly it also registers all
the other sysfs entries (mostly performance monitoring controls) on all
possible cpus, although they are quite meaningless on non-online cpus.
This patch alters the code to only register sysfs directories at boot for
cpus which are either online or could be onlined (cpu is possible, and
CONFIG_HOTPLUG_CPU and an lpar machine). Furthermore, the entries apart
from 'online' itself and 'physical_id' are only registered for online CPUs
(and deregistered again if a cpu goes offline).
Currently the ppc64 sysfs code registers an entry for each possible cpu in
sysfs, rather than just online cpus. That makes sense, since the sysfs
entries are needed to control onlining of the cpus. However, this is done
even if CONFIG_HOTPLUG_CPU is not set, or if it is not a hotplug capable
(DLPAR) machine, which is a bit misleading. Secondly it also registers all
the other sysfs entries (mostly performance monitoring controls) on all
possible cpus, although they are quite meaningless on non-online cpus.
This patch alters the code to only register sysfs directories at boot for
cpus which are either online or could be onlined (cpu is possible, and
CONFIG_HOTPLUG_CPU and an lpar machine). Furthermore, the entries apart
from 'online' itself and 'physical_id' are only registered for online CPUs
(and deregistered again if a cpu goes offline).
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.53, 2005-01-03 20:39:42-08:00, ananth@in.ibm.com
[PATCH] ppc64: kprobes implementation
Kprobes (Kernel dynamic probes) is a lightweight mechanism for kernel
modules to insert probes into a running kernel, without the need to modify
the underlying source. The probe handlers can then be coded to log
relevent data at the probe point. More information on kprobes can be found
at:
http://www-124.ibm.com/developerworks/oss/linux/projects/kprobes/
Jprobes (or jumper probes) is a small infrastructure to access function
arguments. It can be used by defining a small stub with the same template
as the routine in kernel, within which the required parameters can be
logged.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.52, 2005-01-03 20:39:27-08:00, a.othieno@bluewin.ch
[PATCH] ppc32: Resurrect Documentation/powerpc/cpu_features.txt
Documentation/powerpc/cpu_features.txt mysteriously disappeared sometime
when 2.5 forked off.
Searching through BK logs on linux.bkbits.net didn't reveal anything,
unfortunately. The only reference I could pick up from searching the
available lkml archives is the 2.4.20-pre11 ChangeLog where this was first
merged.
Thus far, nothing indicates it was intentionally removed, and AFAICS, is
still up to date with the current code.
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.51, 2005-01-03 20:39:14-08:00, mporter@kernel.crashing.org
[PATCH] ppc32: fix io_remap_page_range for 36-bit phys platforms
Fixes io_remap_page_range() to use the 32-bit address translator similar to
ioremap(). Someday u64 start/end resources should make this unnecessary.
Fixes set_pte() to handle a long long pte_t properly.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.50, 2005-01-03 20:39:01-08:00, mporter@kernel.crashing.org
[PATCH] ppc32: add uImage to default targets
We'd like to get a uImage when just using 'make' on many targets. After
some discussion, it made sense to simply add uImage to the default targets
since it adds minimal build overhead and will work on all platforms. Also,
fix a dependency in the boot stuff.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.49, 2005-01-03 20:38:48-08:00, minyard@acm.org
[PATCH] PPC debug setcontext syscall implementation.
Add a debugging interface for PowerPC that allows signal handlers (or any
jump to a context, really) to perform debug functions. It allows the a
user program to turn on single-stepping, for instance, and the thread will
get a trap after executing the next instruction. It can also (on supported
PPC processors) turn on branch tracing and get a trap after the next branch
instruction is executed. This is useful for in-application debugging.
Note that you can enable single-stepping on x86 processors directly from
signal handlers. Newer x86 processors have the equivalent of a
branch-trace bit in the IA32_DEBUGCTL MSR and could have similar function
to this syscall. Most other processors could benefit from a similar
interface, except for ARM which is extraordinarily broken for debugging.
Future uses of this could be adding the ability to set the hardware
breakpoint registers from a signal handler.
Signed-off-by: Corey Minyard <minyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.48, 2005-01-03 20:38:35-08:00, mporter@kernel.crashing.org
[PATCH] ppc32: remove bogus SPRN_CPC0_GPIO define
This trivial patch removes long-standing typo in ibm44x.h. In fact, we
already have correct DCRN_CPC0_GPIO define later in the same file.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.47, 2005-01-03 20:38:22-08:00, mporter@kernel.crashing.org
[PATCH] ppc32: fix ebony.c warnings
This patch removes annoying warnings in ebony.c. Fix is similar to one I
made in ocotea.c before.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.46, 2005-01-03 20:38:09-08:00, galak@somerset.sps.mot.com
[PATCH] Fix prototypes & externs in e500 oprofile support
Remove prototypes and externs out of the .c files
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.45, 2005-01-03 20:37:56-08:00, galak@linen.sps.mot.com
[PATCH] ppc32: performance Monitor/Oprofile support for e500
Adds oprofile support for the e500 PowerPC core.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.44, 2005-01-03 20:33:46-08:00, mporter@kernel.crashing.org
[PATCH] ppc32: PPC4xx PIC rewrite/cleanup
Patch from Eugene to do some cleanup of the PPC4xx PIC code. Separates the
interrupts that can have polarity/triggering modified for platform
modification if necessary. Between the two of us, it's tested on most of
the affected platforms.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.43, 2005-01-03 20:33:32-08:00, rvinson@mvista.com
[PATCH] ppc32: add Support for IBM 750FX and 750GX Eval Boards
I've added support for the IBM 750FX and 750GX Eval Boards
(Chestnut/Buckeye).
Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.42, 2005-01-03 20:33:18-08:00, mgreer@mvista.com
[PATCH] ppc32: support for Artesyn Katana cPCI boards
This patch adds support for the Artesyn Katana 750i, 752i, and 3750.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.41, 2005-01-03 20:33:05-08:00, mgreer@mvista.com
[PATCH] ppc32: support for Force CPCI-690 board
This patch adds support for the Force CPCI-690 cPCI board.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.40, 2005-01-03 20:32:51-08:00, mgreer@mvista.com
[PATCH] ppc32: support for Marvell EV-64260[ab]-BP eval platform
This patch adds support for a line of evaluation platforms from Marvell
that use the Marvell GT64260[ab] host bridges.
This patch depends on the Marvell host bridge support patch (mv64x60).
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.39, 2005-01-03 20:32:15-08:00, mgreer@mvista.com
[PATCH] ppc32-marvell-host-bridge-support-mv64x60 review fixes
Here is an incremental patch [hopefully] with your concerns addressed.
Note that the arch/ppc/boot code is not kernel code and only exists for a
short period of time before execution jumps to the kernel.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.38, 2005-01-03 20:32:01-08:00, mgreer@mvista.com
[PATCH] ppc32: Marvell host bridge support (mv64x60)
This patch adds core support for a line of host bridges from Marvell
(formerly Galileo). This code has been tested with a GT64260a, GT64260b,
MV64360, and MV64460. Patches for platforms that use these bridges will be
sent separately.
The patch is rather large so a link is provided.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.37, 2005-01-03 20:20:09-08:00, trini@kernel.crashing.org
[PATCH] ppc32: Switch to KBUILD_DEFCONFIG
The following patch switches ppc32 from using arch/ppc/defconfig to
arch/ppc/configs/common_defconfig as a defconfig. These files are supposed
to be identical, but always end up out of sync. This also updates the
common_defconfig with current options.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.36, 2005-01-03 20:19:56-08:00, galak@somerset.sps.mot.com
[PATCH] ppc32: refactor common book-e exception code
Moves common handling of InstructionStorage, Alignment, Program, and
Decrementer exceptions handlers for Book-E processors (44x & e500) into
common code.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.35, 2005-01-03 20:19:43-08:00, galak@somerset.sps.mot.com
[PATCH] ppc32: freescale Book-E MMU cleanup
Updates the Freescale Book-E MMU usage to match the architecture spec.
This is mainly growing the widths of fields in various registers to match
the architecture spec instead of the implementation.
Signed-off-by: Becky Gill <becky.gill@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.34, 2005-01-03 20:19:30-08:00, gandalf@netfilter.org
[PATCH] Fix broken RST handling in ip_conntrack
Here's a patch that fixes a pretty serious bug introduced by a recent
"bugfix". The problem is that RST packets are ignored if they follow an
ACK packet, this means that the timeout of the connection isn't decreased,
so we get lots of old connections lingering around until the timeout
expires, the default timeout for state ESTABLISHED is 5 days.
This needs to go into -bk as soon as possible. The bug is present in
2.6.10 as well.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.33, 2005-01-03 20:19:17-08:00, rusty@rustcorp.com.au
[PATCH] netfilter: Fix cleanup in ipt_recent should ipt_registrater_match error
When ipt_registrater_match() fails, ipt_recent doesn't remove its proc
entry. Found by nfsim.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.32, 2005-01-03 20:19:04-08:00, rusty@rustcorp.com.au
[PATCH] netfilter: Remove copy_to_user Warnings in Netfilter
After changing firewall rules, we try to return the counters to userspace. We
didn't fail at that point if the copy failed, but it doesn't really matter.
Someone added a warn_unused_result attribute to copy_to_user, so we get bogus
warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.31, 2005-01-03 20:18:48-08:00, rusty@rustcorp.com.au
[PATCH] netfilter: Remove IPCHAINS and IPFWADM compatibility
We've been threatening to do this for ages: remove the backwards compatibility
code. We can now combine ip_conntrack_core.c and ip_conntrack_standalone.c,
likewise for the NAT code, but that will come later.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.30, 2005-01-03 20:18:31-08:00, rusty@rustcorp.com.au
[PATCH] netfilter: Add comment above remove_expectations in destroy_conntrack()
I removed this code in a previous patch, and Patrick McHardy explained
what was wrong. Add a comment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.29, 2005-01-03 20:18:18-08:00, rusty@rustcorp.com.au
[PATCH] netfilter: Fix ip_ct_selective_cleanup(), and rename ip_ct_iterate_cleanup()
Several places use ip_ct_selective_cleanup() as a general iterator, which it
was not intended for (it takes a const ip_conntrack *). So rename it, and
make it take a non-const argument.
Also, it missed unconfirmed connections, which aren't in the hash table. This
introduces a potential problem for users which expect to iterate all
connections (such as the helper deletion code). So keep a linked list of
unconfirmed connections as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.28, 2005-01-03 20:18:05-08:00, rusty@rustcorp.com.au
[PATCH] netfilter: Fix ip_conntrack_proto_sctp exit on sysctl fail
On failure from register_sysctl_table, we return with exit 0. Oops. init and
fini should also be static. nfsim found these.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.27, 2005-01-03 20:17:52-08:00, rusty@rustcorp.com.au
[PATCH] netfilter: fix return values of ipt_recent checkentry
Peejix's nfsim test for ipt_recent, written two days ago, revealed this bugs
with ipt_recent: checkentry() returns true or false, not an error. (Maybe it
should, but that's a much larger change). Also, make hash_func() static.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.26, 2005-01-03 20:17:39-08:00, bcasavan@sgi.com
[PATCH] TCP hashes: NUMA interleaving
Modifies the TCP ehash and TCP bhash to enable the use of vmalloc to
alleviate boottime memory allocation imbalances on NUMA systems, utilizing
flags to the alloc_large_system_hash routine in order to centralize the
enabling of this behavior.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.25, 2005-01-03 20:17:25-08:00, bcasavan@sgi.com
[PATCH] filesystem hashes: NUMA interleaving
The following patch modifies the dentry cache and inode cache to enable the
use of vmalloc to alleviate boottime memory allocation imbalances on NUMA
systems, utilizing flags to the alloc_large_system_hash routine in order to
centralize the enabling of this behavior.
In general, for each hash, we check at the early allocation point whether
hash distribution is enabled, and if so we defer allocation. At the late
allocation point we perform the allocation if it was not earlier deferred.
These late allocation points are the same points utilized prior to the
addition of alloc_large_system_hash to the kernel.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.24, 2005-01-03 20:17:12-08:00, bcasavan@sgi.com
[PATCH] alloc_large_system_hash: NUMA interleaving
NUMA systems running current Linux kernels suffer from substantial inequities
in the amount of memory allocated from each NUMA node during boot. In
particular, several large hashes are allocated using alloc_bootmem, and as
such are allocated contiguously from a single node each.
This becomes a problem for certain workloads that are relatively common on
big-iron HPC NUMA systems. In particular, a number of MPI and OpenMP
applications which require nearly all available processors in the system and
nearly all the memory on each node run into difficulties. Due to the uneven
memory distribution onto a few nodes, any thread on those nodes will require a
portion of its memory be allocated from remote nodes. Any access to those
memory locations will be slower than local accesses, and thereby slows down
the effective computation rate for the affected CPUs/threads. This problem is
further amplified if the application is tightly synchronized between threads
(as is often the case), as they entire job can run only at the speed of the
slowest thread.
Additionally since these hashes are usually accessed by all CPUS in the
system, the NUMA network link on the node which hosts the hash experiences
disproportionate traffic levels, thereby reducing the memory bandwidth
available to that node's CPUs, and further penalizing performance of the
threads executed thereupon.
As such, it is desired to find a way to distribute these large hash
allocations more evenly across NUMA nodes. Fortunately current kernels do
perform allocation interleaving for vmalloc() during boot, which provides a
stepping stone to a solution.
This series of patches enables (but does not require) the kernel to allocate
several boot time hashes using vmalloc rather than alloc_bootmem, thereby
causing the hashes to be interleaved amongst NUMA nodes. In particular the
dentry cache, inode cache, TCP ehash, and TCP bhash have been changed to be
allocated in this manner. Due to the limited vmalloc space on architectures
such as i386, this behavior is turned on by default only for IA64 NUMA systems
(though there is no reason other interested architectures could not enable it
if desired). Non-IA64 and non-NUMA systems continue to use the existing
alloc_bootmem() allocation mechanism. A boot line parameter "hashdist" can be
set to override the default behavior.
The following two sets of example output show the uneven distribution just
after boot, using init=/bin/sh to eliminate as much non-kernel allocation as
possible.
Without the boot hash distribution patches:
Nid MemTotal MemFree MemUsed (in kB)
0 3870656 3697696 172960
1 3882992 3866656 16336
2 3883008 3866784 16224
3 3882992 3866464 16528
4 3883008 3866592 16416
5 3883008 3866720 16288
6 3882992 3342176 540816
7 3883008 3865440 17568
8 3882992 3866560 16432
9 3883008 3866400 16608
10 3882992 3866592 16400
11 3883008 3866400 16608
12 3882992 3866400 16592
13 3883008 3866432 16576
14 3883008 3866528 16480
15 3864768 3848256 16512
ToT 62097440 61152096 945344
Notice that nodes 0 and 6 have a substantially larger memory utilization
than all other nodes.
With the boot hash distribution patch:
Nid MemTotal MemFree MemUsed (in kB)
0 3870656 3789792 80864
1 3882992 3843776 39216
2 3883008 3843808 39200
3 3882992 3843904 39088
4 3883008 3827488 55520
5 3883008 3843712 39296
6 3882992 3843936 39056
7 3883008 3844096 38912
8 3882992 3843712 39280
9 3883008 3844000 39008
10 3882992 3843872 39120
11 3883008 3843872 39136
12 3882992 3843808 39184
13 3883008 3843936 39072
14 3883008 3843712 39296
15 3864768 3825760 39008
ToT 62097440 61413184 684256
While not perfectly even, we can see that there is a substantial improvement
in the spread of memory allocated by the kernel during boot. The remaining
uneveness may be due in part to further boot time allocations that could be
addressed in a similar manner, but some difference is due to the somewhat
special nature of node 0 during boot. However the uneveness has fallen to a
much more acceptable level (at least to a level that SGI isn't concerned
about).
The astute reader will also notice that in this example, with this patch
approximately 256 MB less memory was allocated during boot. This is due to
the size limits of a single vmalloc. More specifically, this is because the
automatically computed size of the TCP ehash exceeds the maximum size which a
single vmalloc can accomodate. However this is of little practical concern as
the vmalloc size limit simply reduces one ridiculously large allocation
(512MB) to a slightly less ridiculously large allocation (256MB). In practice
machines with large memory configurations are using the thash_entries setting
to limit the size of the TCP ehash _much_ lower than either of the
automatically computed values. Illustrative of the exceedingly large nature
of the automatically computed size, SGI currently recommends that customers
boot with thash_entries=2097152, which works out to a 32MB allocation. In any
case, setting hashdist=0 will allow for allocations in excess of vmalloc
limits, if so desired.
Other than the vmalloc limit, great care was taken to ensure that the size of
TCP hash allocations was not altered by this patch. Due to slightly different
computation techniques between the existing TCP code and
alloc_large_system_hash (which is now utilized), some of the magic constants
in the TCP hash allocation code were changed. On all sizes of system (128MB
through 64GB) that I had access to, the patched code preserves the previous
hash size, as long as the vmalloc limit (256MB on IA64) is not encountered.
There was concern that changing the TCP-related hashes to use vmalloc space
may adversely impact network performance. To this end the netperf set of
benchmarks was run. Some individual tests seemed to benefit slightly, some
seemed to be harmed slightly, but in all cases the average difference with and
without these patches was well within the variabilty I would see from run to
run.
The following is the overall netperf averages (30 10 second runs each) against
an older kernel with these same patches. These tests were run over loopback
as GigE results were so inconsistent run to run both with and without these
patches that they provided no meaningful comparison that I could discern. I
used the same kernel (IA64 generic) for each run, simply varying the new
"hashdist" boot parameter to turn on or off the new allocation behavior. In
all cases the thash_entries value was manually specified as discussed
previously to eliminate any variability that might result from that size
difference.
HP ZX1, hashdist=0
==================
TCP_RR = 19389
TCP_MAERTS = 6561
TCP_STREAM = 6590
TCP_CC = 9483
TCP_CRR = 8633
HP ZX1, hashdist=1
==================
TCP_RR = 19411
TCP_MAERTS = 6559
TCP_STREAM = 6584
TCP_CC = 9454
TCP_CRR = 8626
SGI Altix, hashdist=0
=====================
TCP_RR = 16871
TCP_MAERTS = 3925
TCP_STREAM = 4055
TCP_CC = 8438
TCP_CRR = 7750
SGI Altix, hashdist=1
=====================
TCP_RR = 17040
TCP_MAERTS = 3913
TCP_STREAM = 4044
TCP_CC = 8367
TCP_CRR = 7538
I believe the TCP_CC and TCP_CRR are the tests most sensitive to this
particular change. But again, I want to emphasize that even the differences
you see above are _well_ within the variability I saw from run to run of any
given test.
In addition, Jose Santos at IBM has run specSFS, which has been particularly
sensitive to TLB issues, against these patches and saw no performance
degredation (differences down in the noise).
This patch:
Modifies alloc_large_system_hash to enable the use of vmalloc to alleviate
boottime allocation imbalances on NUMA systems.
Due to limited vmalloc space on some architectures (i.e. x86), the use of
vmalloc is enabled by default only on NUMA IA64 kernels. There should be
no problem enabling this change for any other interested NUMA architecture.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.23, 2005-01-03 20:16:59-08:00, alex.williamson@hp.com
[PATCH] collect page_states only from online cpus
I noticed the function __read_page_state() curiously high in a q-tools
profile of a write to a software raid0 device. Seems this is because we're
checking page_states for all possible cpus and we have NR_CPUS possible
when CONFIG_HOTPLUG_CPU=y. The default config for ia64 is now NR_CPUS=512,
so on a little 8-way box, this is a significant waste of time. The patch
below updates __read_page_state() and __get_page_state() to only count
page_state info for online cpus. To keep the stats consistent, the
page_alloc notifier is updated to move page_states off of the cpu going
offline. On my profile, this dropped __read_page_state() back into the
noise and boosted block write performance by 5% (as measured by spew -
http://spew.berlios.de).
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.22, 2005-01-03 20:16:46-08:00, manfred@colorfullife.com
[PATCH] slab: Add more arch overrides to control object alignment
Add ARCH_SLAB_MINALIGN and document ARCH_KMALLOC_MINALIGN: The flags allow
the arch code to override the default minimum object aligment
(BYTES_PER_WORD).
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.21, 2005-01-03 20:16:33-08:00, akpm@osdl.org
[PATCH] do_anonymous_page() use SetPageReferenced
mark_page_accessed() is more heavyweight than we need: the page is already
headed for the active list, so setting the software-referenced bit is
equivalent.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.20, 2005-01-03 20:16:19-08:00, miquels@cistron.nl
[PATCH] mark_page_accessed() for read()s on non-page boundaries
When reading a (partial) page from disk using read(), the kernel only marks
the page as "accessed" if the read started at a page boundary. This means
that files that are accessed randomly at non-page boundaries (usually
database style files) will not be cached properly.
The patch below uses the readahead state instead. If a page is read(), it
is marked as "accessed" if the previous read() was for a different page,
whatever the offset in the page.
Testing results:
- Boot kernel with mem=128M
- create a testfile of size 8 MB on a partition. Unmount/mount.
- then generate about 10 MB/sec streaming writes
for i in `seq 1 1000`
do
dd if=/dev/zero of=junkfile.$i bs=1M count=10
sync
cat junkfile.$i > /dev/null
sleep 1
done
- use an application that reads 128 bytes 64000 times from a
random offset in the 64 MB testfile.
1. Linux 2.6.10-rc3 vanilla, no streaming writes:
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.03s user 0.22s system 5% cpu 4.456 total
2. Linux 2.6.10-rc3 vanilla, streaming writes:
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.03s user 0.16s system 2% cpu 7.667 total
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.03s user 0.37s system 1% cpu 23.294 total
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.02s user 0.99s system 1% cpu 1:11.52 total
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.03s user 0.21s system 2% cpu 10.273 total
3. Linux 2.6.10-rc3 with read-page-access.patch , streaming writes:
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.02s user 0.21s system 3% cpu 7.634 total
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.04s user 0.22s system 2% cpu 9.588 total
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.02s user 0.12s system 24% cpu 0.563 total
# time ~/rr testfile
Read 128 bytes 64000 times
~/rr testfile 0.03s user 0.13s system 98% cpu 0.163 total
As expected, with the read-page-access.patch, the kernel keeps the 8 MB
testfile cached as expected, while without it, it doesn't.
So this is useful for workloads where one smallish (wrt RAM) file is read
randomly over and over again (like heavily used database indexes), while
other I/O is going on. Plain 2.6 caches those files poorly, if the app
uses plain read().
Signed-Off-By: Miquel van Smoorenburg <miquels@cistron.nl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.19, 2005-01-03 20:16:04-08:00, haveblue@us.ibm.com
[PATCH] make sure ioremap only tests valid addresses
When CONFIG_HIGHMEM=y, but ZONE_NORMAL isn't quite full, there is, of
course, no actual memory at *high_memory. This isn't a problem with normal
virt<->phys translations because it's never dereferenced, but
CONFIG_NONLINEAR is a bit more finicky. So, don't do virt_to_phys() to
non-existent addresses.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.18, 2005-01-03 20:15:51-08:00, haveblue@us.ibm.com
[PATCH] kill off highmem_start_page
People love to do comparisons with highmem_start_page. However, where
CONFIG_HIGHMEM=y and there is no actual highmem, there's no real page at
*highmem_start_page.
That's usually not a problem, but CONFIG_NONLINEAR is a bit more strict and
catches the bogus address tranlations.
There are about a gillion different ways to find out of a 'struct page' is
highmem or not. Why not just check page_flags? Just use PageHighMem()
wherever there used to be a highmem_start_page comparison. Then, kill off
highmem_start_page.
This removes more code than it adds, and gets rid of some nasty
#ifdefs in .c files.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.17, 2005-01-03 20:15:37-08:00, Andries.Brouwer@cwi.nl
[PATCH] mm: overcommit updates
Alan made overcommit mode 2 and it doesnt work at all. A process passing
the limit often does so at a moment of stack extension, and is killed by a
segfault, not better than being OOM-killed.
Another problem is that close to the edge no other processes can be
started, so that a sysadmin has problems logging in and investigating.
Below a patch that does 3 things:
(1) It reserves a reasonable amount of virtual stack space (amount
randomly chosen, no guarantees given) when the process is started, so
that the common utilities will not be killed by segfault on stack
extension.
(2) It reserves a reasonable amount of virtual memory for root, so that
root can do things when the system is out-of-memory
(3) It limits a single process to 97% of what is left, so that also an
ordinary user is able to use getty, login, bash, ps, kill and similar
things when one of her processes got out of control.
Since the current overcommit mode 2 is not really useful, I did not give
this a new number.
The patch is just for playing, not to be applied by Linus. But, Andrew, I
hope that you would be willing to put this in -mm so that people can
experiment. Of course it only does something if one sets overcommit mode
to 2.
The past month I have pressured people asking for feedback, and now have
about a dozen reports, mostly positive, one very positive.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.16, 2005-01-03 20:15:21-08:00, andrea@novell.com
[PATCH] mempolicy optimisation
Some optimizations in mempolicy.c (like to avoid rebalancing the tree while
destroying it and by breaking loops early and not checking for invariant
conditions in the replace operation).
Signed-off-by: Andrea Arcangeli <andrea@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.15, 2005-01-03 20:15:08-08:00, linuxram@us.ibm.com
[PATCH] Simplified readahead congestion control
Reinstate the feature wherein readahead will be bypassed if the underlying
queue is read-congersted.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.14, 2005-01-03 20:14:55-08:00, slpratt@austin.ibm.com
[PATCH] Simplified readahead
With Ram Pai <linuxram@us.ibm.com>
- request size is now passed into page_cache_readahead. This allows the
removal of the size averaging code in the current readahead logic.
- readahead rampup is now faster (especially for larger request sizes)
- No longer "slow read path". Readahead is turn off at first random access,
turned back on at first sequential access.
- Code now handles thrashing, slowly reducing readahead window until
thrashing stops, or min size reached.
- Returned to old behavior where first access is assumed sequential only if
at offset 0.
- designed to handle larger (1M or above) window sizes efficiently
Benchmark results:
machine 1: 8 way pentiumIV 1GB memory, tests run to 36GB SCSI disk
(Similar results were seen on a 1 way 866Mhz box with IDE disk.)
TioBench:
tiobench.pl --dir /mnt/tmp --block 4096 --size 4000 --numruns 2 --threads 1(4,16,64)
4k request size sequential read results in MB/sec
Threads 2.6.9 w/patches %diff diff
ChangeSet@1.1938.483.13, 2005-01-03 20:14:42-08:00, nickpiggin@yahoo.com.au
[PATCH] mm: teach kswapd about higher order areas
Teach kswapd to free memory on behalf of higher order allocators. This
could be important for higher order atomic allocations because they
otherwise have no means to free the memory themselves.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.12, 2005-01-03 20:14:29-08:00, nickpiggin@yahoo.com.au
[PATCH] mm: higher order watermarks
Move the watermark checking code into a single function. Extend it to
account for the order of the allocation and the number of free pages that
could satisfy such a request.
From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Fix typo in Nick's kswapd-high-order awareness patch
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.11, 2005-01-03 20:14:14-08:00, nickpiggin@yahoo.com.au
[PATCH] mm: keep count of free areas
Keep track of the number of free pages of each order in the buddy allocator.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.10, 2005-01-03 20:14:02-08:00, rjmx@rjmx.net
[PATCH] CS461x gameport code isn't being included in build
With Cal Peake <cp@absolutedigital.net>
I've found a typo in drivers/input/gameport/Makefile in kernel 2.6.9 which
effectively prevents the CS461x gameport code from being included.
Signed-off-by: Ron Murray <rjmx@rjmx.net>
Signed-off-by: Cal Peake <cp@absolutedigital.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.9, 2005-01-03 20:13:49-08:00, akpm@osdl.org
[PATCH] vmscan: total_scanned fix
We haven't been incrementing local variable total_scanned since the
scan_control stuff went in. That broke kswapd throttling.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.8, 2005-01-03 20:13:31-08:00, jack@suse.cz
[PATCH] Allow disabling quota messages to console
Allow disabling of quota messages to console (they can disturb other
output).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.7, 2005-01-03 20:13:18-08:00, jack@suse.cz
[PATCH] Fix of quota deadlock on pagelock: reiserfs
Implement quota journaling and quota reading and writing functions for
reiserfs. Solves also several other deadlocks possible for reiserfs due to
the lock inversion on journal_begin and quota locks.
From: Vladimir Saveliev <vs@namesys.com>
When CONFIG_QUOTA is defined reiserfs's finish_unfinished sets and clears
MS_ACTIVE bit in s_flags field of super block. If that bit was set already
it should not be set.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.6, 2005-01-03 20:13:03-08:00, jack@suse.cz
[PATCH] Fix of quota deadlock on pagelock: ext3
Implementation of quota reading and writing functions for ext3.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.5, 2005-01-03 20:12:49-08:00, jack@suse.cz
[PATCH] Fix of quota deadlock on pagelock: ext2
Implementation of quota reading and writing functions for ext2.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.4, 2005-01-03 20:12:36-08:00, jack@suse.cz
[PATCH] quota umount race fix
Fix possible races between umount and quota on/off.
Finally I decided to take a reference to vfsmount during vfs_quota_on() and
to drop it after the final cleanup in the vfs_quota_off(). This way we
should be all the time guarded against umount. This way was protected also
the old code which used filp_open() for opening quota files. I was also
thinking about other ways of protection but there would be always a window
(provided I don't want to play much with namespace locks) where
vfs_quota_on() could be called while umount() is in progress resulting in
the "Busy inodes after unmount" messages...
Get a reference to vfsmount during quotaon() so that we are guarded against
umount (as was the old code using filp_open()).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.3, 2005-01-03 20:12:24-08:00, jack@suse.cz
[PATCH] Fix of quota deadlock on pagelock: quota core
The four patches in this series fix deadlocks with quotas of pagelock (the
problem was lock inversion on PageLock and transaction start - quota code
needed to first start a transaction and then write the data which subsequently
needed acquisition of PageLock while the standard ordering - PageLock first
and transaction start later - was used e.g. by pdflush). They implement a
new way of quota access to disk: Every filesystem that would like to implement
quotas now has to provide quota_read() and quota_write() functions. These
functions must obey quota lock ordering (in particular they should not take
PageLock inside a transaction).
The first patch implements the changes in the quota core, the other three
patches implement needed functions in ext2, ext3 and reiserfs. The patch for
reiserfs also fixes several other lock inversion problems (similar as ext3
had) and implements the journaled quota functionality (which comes almost for
free after the locking fixes...).
The quota core patch makes quota support in other filesystems (except XFS
which implements everything on its own ;)) unfunctional (quotaon() will refuse
to turn on quotas on them). When the patches get reasonable wide testing and
it will seem that no major changes will be needed I can make fixes also for
the other filesystems (JFS, UDF, UFS).
This patch:
The patch implements the new way of quota io in the quota core. Every
filesystem wanting to support quotas has to provide functions quota_read()
and quota_write() obeying quota locking rules. As the writes and reads
bypass the pagecache there is some ugly stuff ensuring that userspace can
see all the data after quotaoff() (or Q_SYNC quotactl). In future I plan
to make quota files inaccessible from userspace (with the exception of
quotacheck(8) which will take care about the cache flushing and such stuff
itself) so that this synchronization stuff can be removed...
The rewrite of the quota core. Quota uses the filesystem read() and write()
functions no more to avoid possible deadlocks on PageLock. From now on every
filesystem supporting quotas must provide functions quota_read() and
quota_write() which obey the quota locking rules (e.g. they cannot acquire the
PageLock).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.2, 2005-01-03 20:12:10-08:00, jack@suse.cz
[PATCH] Fix reiserfs quota debug messages
Attached patch fixes debug messages of quota code in reiserfs so that they
compile. Chris Mason agreed the patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.483.1, 2005-01-03 20:11:57-08:00, jack@suse.cz
[PATCH] Expose reiserfs_sync_fs()
Attached patch exposes reiserfs_sync_fs(). This call is needed by the new
quota code to write data to disk on quotaoff so that userspace can see them
afterwards. Chris Mason agrees with the patch.
Make reiserfs provide the sync_fs() function so that the quota code
has a way to reliably force a transaction to disk.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.482.1, 2005-01-03 22:48:10+00:00, mzzhgg@de.rmk.(none)
[SERIAL] support for another Rockwell PNP modem
From: Lennart Poettering
Trivial patch against Linux 2.6.10 which adds PNP support for a
certain kind of Rockwell 28.8/ISA modems.
ChangeSet@1.1938.481.2, 2005-01-03 18:56:59+00:00, rmk@flint.arm.linux.org.uk
[MMC] Remove deprecated data->req
Since all users of this have now been eliminated, we can eliminate
the element itself. MMC host drivers now operate only on the
scatter lists passed to them, rather than needing knowledge of
block devices.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.481.1, 2005-01-03 18:37:35+00:00, drzeus-list@cx.rmk.(none)
[MMC] Fix warning in wbsd
From: Pierre Ossman
Cleanup that fixes a warning in the wbsd module.
ChangeSet@1.1938.480.5, 2005-01-03 18:28:00+00:00, rmk@flint.arm.linux.org.uk
[ARM] Fix some pointer/integer conversion warnings for RiscPC.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.480.4, 2005-01-03 18:07:07+00:00, rmk@flint.arm.linux.org.uk
[ARm] Silence a couple of compiler warnings.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.480.3, 2005-01-03 17:02:08+00:00, Liam.Girdwood@com.rmk.(none)
[ARM PATCH] 2342/1: Support PXA SSP configuration changes when port is open
Patch from Liam Girdwood
This patch allows the PXA SSP port configuration to be changed without
the need to close the port.
Signed-off-by: Liam Girdwood
Signed-off-by: Russell King
ChangeSet@1.1938.480.2, 2005-01-03 16:33:30+00:00, rmk@flint.arm.linux.org.uk
[ARM] Swap DOMAIN_USER and DOMAIN_KERNEL indicies
This changes kernel domains to use domain 0 rather than domain 1,
in preparation to supporting supersection mappings.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.480.1, 2005-01-03 16:13:30+00:00, Liam.Girdwood@com.rmk.(none)
[ARM PATCH] 2340/1: Added PXA27x SSP port 3 to kernel io address range
Patch from Liam Girdwood
This patch adds the PXA27x SSP port 3 configuration register space (Phys
0x41900000) to the kernel memory table.
Signed-off-by: Liam Girdwood
Signed-off-by: Russell King
ChangeSet@1.1938.1.200, 2005-01-03 15:12:29+01:00, perex@suse.cz
Merge suse.cz:/home/perex/bk/linux-sound/linux-sound
into suse.cz:/home/perex/bk/linux-sound/work
ChangeSet@1.1938.1.199, 2005-01-03 14:55:25+01:00, perex@suse.cz
Merge suse.cz:/home/perex/bk/linux-sound/linux-2.5
into suse.cz:/home/perex/bk/linux-sound/linux-sound
ChangeSet@1.1938.421.85, 2005-01-03 14:17:36+01:00, perex@suse.cz
[ALSA] Fix spinlock
au88x0 driver
Fixed possible spin deadlocks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.84, 2005-01-03 14:16:30+01:00, perex@suse.cz
[ALSA] Add CODEC and BUS device types
OPL3,OPL4,I2C lib core,L3 drivers,AK4117 receiver,ALSA Core
EMU8000 driver,AC97 Codec Core,AK4531 codec
Added SNDRV_DEV_CODEC and SNDRV_DEV_BUS types to tell from the lowlevel
components.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.83, 2005-01-03 14:15:19+01:00, perex@suse.cz
[ALSA] Remove superfluous code
USB USX2Y
Removed the superfluous creation/deletion of lowlevel component.
It's not used at all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.82, 2005-01-03 14:14:10+01:00, perex@suse.cz
[ALSA] Fix the order of creation of instances
AZT3328 driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
Maestro3 driver,SonicVibes driver,CS46xx driver,KORG1212 driver
NM256 driver,Trident driver,YMFPCI driver
Make sure that the chip instance is created at first before other components.
This will fix occasional oops at unloading due to the access to the released
resources.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1968, 2005-01-03 14:13:22+01:00, dtor_core@ameritech.net
Input: i8042 - fix "debug" parameter sysfs permissions.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
ChangeSet@1.1938.421.81, 2005-01-03 14:12:59+01:00, perex@suse.cz
[ALSA] Clean up codes
ALSA<-OSS emulation
Got rid of the unused float codes (the legacy code for sharing with ALSA
library).
Add assert to the invalid conversion indices which results in oops
(just to be sure).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.80, 2005-01-03 14:11:51+01:00, perex@suse.cz
[ALSA] Description about snd_card_set_dev()
Documentation
Added the description about snd_card_set_dev().
Misc cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.79, 2005-01-03 14:10:46+01:00, perex@suse.cz
[ALSA] Fix the release of resources at error path
Control Midlevel
Implemented free callback to fix the release of control resources
before calling register.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.78, 2005-01-03 14:09:39+01:00, perex@suse.cz
[ALSA] Update documentation for hotplug fw loader
Documentation
Updated descriptions about the firmware loading for the recent support of
hotplug firmware loader.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.77, 2005-01-03 14:08:33+01:00, perex@suse.cz
[ALSA] Add hotplug firmware loader support
RME HDSP driver
Added the hotplug firmware loader support without hdsploader.
The firmware data must be installed beforehand in the proper place from
the latest alsa-firmware package.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.76, 2005-01-03 13:40:30+01:00, perex@suse.cz
[ALSA] Fix compile warning
EMU10K1/EMU10K2 driver
Removed an unused variable to fix a compile warning.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.75, 2005-01-03 13:38:17+01:00, perex@suse.cz
[ALSA] Fix compile warning (make inline)
AZT3328 driver
Fixed compile warning when built without joystick support.
(Optimized via inline.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.74, 2005-01-03 13:36:57+01:00, perex@suse.cz
[ALSA] Fix open handling
USB USX2Y
Return -EBUSY from snd_usX2Y_usbpcm_open(), if the associated hwdep
device is not opened.
It now works as originally intended. Had forgotten a pair of parenthesis.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1967, 2005-01-03 13:15:38+01:00, vojtech@suse.cz
Merge suse.cz:/home/vojtech/bk/linus into suse.cz:/home/vojtech/bk/input
ChangeSet@1.1938.421.73, 2005-01-03 13:07:33+01:00, perex@suse.cz
[ALSA CVS] delete unused file
Remove nowhere referenced file. (egrep "filename\." didn't find
anything)
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.72, 2005-01-03 11:48:48+01:00, perex@suse.cz
[ALSA] Code clean up
EMU10K1/EMU10K2 driver
Small code clean up. Use snd_pcm_lib_preallocage_pages_for_all()
for buffer allocation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.71, 2005-01-03 11:47:44+01:00, perex@suse.cz
[ALSA] Avoid VRA on codec chips
YMFPCI driver
Avoid VRA setting on ac97 codec chips. YMFPCI doesn't need VRA.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.70, 2005-01-03 11:46:35+01:00, perex@suse.cz
[ALSA] Add snd-ca0106 driver
Documentation,PCI drivers,CA0106 driver
Added snd-ca0106 driver for SB Audigy LS / Live 24bit boards
by James Courtier-Dutton <James@superbug.demon.co.uk>.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.69, 2005-01-03 11:45:19+01:00, perex@suse.cz
[ALSA] Add emu10k1x driver
Documentation,PCI drivers,EMU10K1/EMU10K2 driver
Added the new driver, snd-emu10k1x, for SB Live Dell OEM version
by Francisco Moraes <fmoraes@nc.rr.com>.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.68, 2005-01-03 11:44:08+01:00, perex@suse.cz
[ALSA] Allow strings for ac97_quirk options
AC97 Codec Core,Intel8x0 driver,VIA82xx driver
Since there are many ac97_quirk values, the number is no longer good to
remember what it really means. Now ac97_quirk option becomes as a string
option, and more undstandable. For example, you can pass like
'ac97_quirk=hp_only'. The old number is still kept and parsed for backward
compatibility.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.67, 2005-01-03 11:42:58+01:00, perex@suse.cz
[ALSA] Fix handling of user-defined controls
Control Midlevel,ALSA Core
Fixed handling of user-defined controls.
The max number of user-defined controls is limited, too (as default 32).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.66, 2005-01-03 11:41:53+01:00, perex@suse.cz
[ALSA] Don't probe rates when bus->no_vra is set
AC97 Codec Core
Don't probe rates and set VRA/VRM bits when bus->no_vra is set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.65, 2005-01-03 11:40:49+01:00, perex@suse.cz
[ALSA] Use msleep() in ac97 callbacks
CS46xx driver,NM256 driver
Use msleep() instead of mdelay() in ac97 callbacks (spinlock was removed).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.64, 2005-01-03 11:39:40+01:00, perex@suse.cz
[ALSA] Spinlock removal and loop fix
au88x0 driver
Removed unnecessary spinlocks.
The invalid (typo) loop in the codec read callback is fixed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.63, 2005-01-03 11:38:37+01:00, perex@suse.cz
[ALSA] Fix spinlocks
FM801 driver
Fixed the possible deadlock with no irq spinlock.
Also, spin_lock_irqsave() is replaced with spin_lock_irq() in some places.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.62, 2005-01-03 11:37:31+01:00, perex@suse.cz
[ALSA] Remove unnecessary ac97 spinlocks
ATIIXP driver,ATIIXP-modem driver,ENS1370/1+ driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,VIA82xx driver
VIA82xx-modem driver
Removed unnecessary spinlocks in ac97 callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.61, 2005-01-03 11:36:22+01:00, perex@suse.cz
[ALSA] Remove spinlock in callbacks
AC97 Codec Core,AK4531 codec
Removed spinlocks in callback, use sempahore instead since all ac97
callbacks are supposed to be non-atomic.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.60, 2005-01-03 11:35:15+01:00, perex@suse.cz
[ALSA] Unify ac97 control callbacks
AC97 Codec Core
Unified single_* and double_* control callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.59, 2005-01-03 11:34:08+01:00, perex@suse.cz
[ALSA] Replace long delays with msleep()
au88x0 driver
Long udelay()'s are replaced with msleep() as much as possible.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.58, 2005-01-03 11:33:00+01:00, perex@suse.cz
[ALSA] Fix creation of control devices over udev
Control Midlevel,ALSA Core
Don't create control devices before the driver initialization finishes
(ALSA BTS #742).
The control device is now handled in the device list together with others
(holding the card instance as the device pointer).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.57, 2005-01-03 11:31:49+01:00, perex@suse.cz
[ALSA] Add mute LED quirk
AC97 Codec Core,Intel8x0 driver
A new quirk type, AC97_TUNE_MUTE_LED, is added for HP/Compaq laptops.
With this quirk, the EAPD bit is used to control the mute LED in
conjunction with the master mute switch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.56, 2005-01-03 11:30:44+01:00, perex@suse.cz
[ALSA] Fix compile warning
Wavefront drivers
Fixed compile warning regarding the sign of char.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.55, 2005-01-03 11:29:35+01:00, perex@suse.cz
[ALSA] Fix the wrong sign of format data entries
PCM Midlevel
Fix suggested by Benjamin Herrenschmidt <benh@kernel.crashing.org>
On architectures like PPC, char is handled as 'unsigned char', thus the
pcm_format_data table entries with -1 give a positive 255. This causes
Oops with OSS-emulation on such architectures.
The patch simply adds the right signed/unsigned prefix to fix this problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.54, 2005-01-03 11:28:17+01:00, perex@suse.cz
[ALSA] Fix invalid 'AutoSync Reference' value
RME HDSP driver
The value returned by controllers for control number 14 ('AutoSync
Reference') is incorrect and different from that reported by doing
a cat /proc/asound/card0/hdsp.
The value reported is not 'AutoSync Reference' but 'Preferred Sync
Reference' instead.
Signed-off-by: Remy Bruno <remy.bruno@trinnov.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.53, 2005-01-03 11:27:08+01:00, perex@suse.cz
[ALSA] Add PCXHR hwdep iface type
ALSA Core
Added SNDRV_HWDEP_IFACE_PCXHR for Digigram PCXHR driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.52, 2005-01-03 11:25:59+01:00, perex@suse.cz
[ALSA] Fix the invalid DMA pointer value
PPC PMAC driver
Fixed the bug returning invalid DMA pointer values.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.51, 2005-01-03 11:24:51+01:00, perex@suse.cz
[ALSA] Fix compilation errors
Digigram VX core,MIXART driver
Fix compilation errors when built without hotplug fw loader.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.50, 2005-01-03 11:23:45+01:00, perex@suse.cz
[ALSA] Fix CMI9739A silent problem
AC97 Codec Core
Fix by Zinx Verituse <zinx@epicsol.org>
The patch for cmi9739a is added. The undocumented unmute bits are
enabled.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.49, 2005-01-03 11:22:40+01:00, perex@suse.cz
[ALSA] Fix interrupt generation on MIDI input for es1938 sound cards
ES1938 driver
The patch ensures that a es1938 based sound card generates interrupts on
incoming MIDI events. I tested the patch successfully on an ess Solo-1 in
a AlphaPC UX/164.
Signed-off-by: Andreas Feldner <pelzi@flying-snail.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.48, 2005-01-03 11:21:34+01:00, perex@suse.cz
[ALSA] Add description about hotplug fw loader
Documentation
New descriptions about hotplug fw loader for vx and mixart drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.47, 2005-01-03 11:20:24+01:00, perex@suse.cz
[ALSA] Hotplug firmware loader support
Digigram VX core,MIXART driver,Digigram VX222 driver
Digigram VX Pocket driver
The hogplut fw loader is supported by vxpocket, vxp440, vx2222 and mixart
drivers. The old ALSA fw loader is still supported for built-in kernels.
To use the hotplug, the new firmware data must be installed beforehand
from the latest alsa-tools package.
The experimental suspend/resume for vxpocket, vxp440 and vx222 are added,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.46, 2005-01-03 11:19:17+01:00, perex@suse.cz
[ALSA] Fix memory corruption
Digigram VX core
Fixed the memory corruption by the wrong sized kmalloc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.45, 2005-01-03 11:18:07+01:00, perex@suse.cz
[ALSA] Return -EBADFD when the device is disconnected
USB generic driver
The trigger callback returns -EBADFD when the device is disconnected.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.44, 2005-01-03 11:17:01+01:00, perex@suse.cz
[ALSA] Add volatile to IO pinters
ALSA Core
Add volatile prefix to IO pointers for copy_to_user_fromio() and
copy_from_user_toio() functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.43, 2005-01-03 11:15:54+01:00, perex@suse.cz
[ALSA] buffersize and constraints on pmac
PPC PMAC driver
Buffersize is a bit small compared to the OSS driver (dmasound.h says
128kb is limit for Amiga, for pmac 256kb is used)
At least on Snapper, some samplerates cause choppy sound when
periods<3 or buffersize is not a multiple of periodsize.
Signed-off-by: Danny Tholen <obiwan@mailmij.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.42, 2005-01-03 11:14:41+01:00, perex@suse.cz
[ALSA] Export snd_ctl_elem_read/write() functions
Control Midlevel,ALSA Core,IOCTL32 emulation
snd_ctl_elem_read() and snd_ctl_elem_write() functions are exported
to be accessible from other kernel modules. They can be used for
suspend/resume codes, for example.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.41, 2005-01-03 11:13:30+01:00, perex@suse.cz
[ALSA] Clean up power-management
Documentation,SA11xx UDA1341 driver,Control Midlevel,ALSA Core
ES18xx driver,OPL3SA2 driver,AD1848 driver,CS4231 driver,ATIIXP driver
ATIIXP-modem driver,CS4281 driver,ES1938 driver,ES1968 driver
Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,VIA82xx driver
VIA82xx-modem driver,ALI5451 driver,CS46xx driver,NM256 driver
Trident driver,YMFPCI driver,Sound Core PDAudioCF driver
PPC PMAC driver
Clean up for PM code.
snd_power_change() is called in the common routines instead of driver's callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.40, 2005-01-03 11:12:14+01:00, perex@suse.cz
[ALSA] Midiman Delta DIO2496 has two stereo analog outs
ICE1712 driver
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
ChangeSet@1.1938.421.39, 2005-01-03 11:11:06+01:00, perex@suse.cz
[ALSA] [trivial] Fix compile warning
Intel8x0 driver
Fix compile warning abount unused variables.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.38, 2005-01-03 11:09:59+01:00, perex@suse.cz
[ALSA] Fix non-symmetrical page_attr changes
Intel8x0 driver
Fixed non-symmetrical calls of change_page_attr() which may cause BUG().
This bug happens only on 440MX.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.37, 2005-01-03 11:08:53+01:00, perex@suse.cz
[ALSA] Add missing USX2Y_PCM hwdep entry
ALSA Core
Added the missing SNDRV_HWDEP_IFACE_USX2Y_PCM definition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.36, 2005-01-03 11:07:46+01:00, perex@suse.cz
[ALSA] Add missing source codes in the last hwdep-pcm patch.
USB USX2Y
The missing source files in the last hwdep-pcm patch are added.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.35, 2005-01-03 11:06:35+01:00, perex@suse.cz
[ALSA] hwdep interface for pcm data
USB,USB USX2Y
Implements 'rawusb' pcm data transfer through hwdep interface:
The usb_hc moves pcm data from/into memory via DMA.
That memory is mmaped by jack's usx2y driver.
Jack's usx2y driver is the first/last executable code to read/write pcm data.
Read/write is a combination of power of 2 period shaping and float/int
conversation.
Compared to standard alsa/jack we leave out power of 2 period shaping
inside snd-usb-usx2y which needs memcpy() and additional buffers.
As a side effect possible unwanted pcm-data coruption resulting of
standard alsa's snd-usb-usx2y period shaping scheme falls away.
Result is sane jack operation at buffering schemes down to 128frames,
2 periods.
Also changed Kconfig file, so snd-usb-usx2y is only available for X86,
PPC or ALPHA platforms, as on others DMA-memory isn't mmapable.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.34, 2005-01-03 11:05:24+01:00, perex@suse.cz
[ALSA] Fix detection of Xbox
AC97 Codec Core
Unfortunately, on newer xboxes, the chip reports less info than
before, making another change necessary - this change is backwards
compatible, and doesn't break earlier xboxes, of course.
The patch is originally from Ed Hucek <hostmaster@ed-soft.at>.
Signed-off-by: David Pye <dmp@davidmpye.dyndns.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.33, 2005-01-03 11:04:20+01:00, perex@suse.cz
ALSA CVS update
ENS1370/1+ driver
Trivial patch to enable rear out selection for ens1373 on
the Gigabyte GA-8IEXP motherboard.
Signed-off-by: Andrew Dennison <andrew-lists@optusnet.com.au>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
ChangeSet@1.1938.421.32, 2005-01-03 11:03:12+01:00, perex@suse.cz
[ALSA] misc cleanups
OPL3,Digigram VX core,I2C cs8427,SoundFont,Common EMU synth
The patch below contains the following changes in ALSA code not touched
by my previous patches:
- make some needlessly global code static
- remove the following unused global functions:
- sound/i2c/cs84: snd_cs8427_detect
- sound/synth/emux/emux_synth.c: snd_emux_release_voice
- sound/synth/emux/soundfont.: snd_soundfont_mem_used
- remove the following unused EXPORT_SYMBOL's:
- sound/i2c/cs8427.c: snd_cs8427_detect
- sound/i2c/cs8427.c: snd_cs8427_reg_read
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.31, 2005-01-03 11:02:01+01:00, perex@suse.cz
[ALSA] Add 'Duplicate Front' control
CS46xx driver
A new mixer control 'Duplicate Front' is added for the board with
a single codec. This toggles the duplication of front signal to
the rear speakers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.30, 2005-01-03 11:00:47+01:00, perex@suse.cz
[ALSA] opl4 depends on opl3
OPL3
Compiling OPL4 doesn't include the snd-opl3-lib. This change in the
Makefile enables now the compiling of snd-opl3-lib.o for OPL4 soundcards.
Signed-off-by: Martin Langer <martin-langer@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.29, 2005-01-03 10:59:39+01:00, perex@suse.cz
[ALSA] Update user-space access from sscape driver
Sound Scape driver
I see that the copy_to/from_user() functions have been updated across
Linux 2.4 and 2.6, and that verify_read/write() has been replaced by
access_ok(). I have patched the SoundScape driver accordingly.
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.28, 2005-01-03 09:19:11+01:00, perex@suse.cz
[ALSA] disable legacy IRQs before request_irq() to avoid unhandled interrupts
VIA82xx driver
Signed-off-by: Christian Koerner <ckoerner@sysgo.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
ChangeSet@1.1938.421.27, 2005-01-03 09:18:06+01:00, perex@suse.cz
[ALSA] IEC958 Capture mixer controls and Universe support
ICE1712 driver,ICE1724 driver
* Added SPI read routine
* Added IEC958 Capture mixer controls
* Improved Universe support
* Headphone Amp renamed to External Amplifier
* Fixed GPIO bug in Prodigy code (There is no GPIO23 on ICE1724)
Signed-off-by: Peter Christensen <peter@developers.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.26, 2005-01-03 09:17:03+01:00, perex@suse.cz
[ALSA] Fix sleep in h/w volume control
ES1968 driver
Fixed sleeps in h/w volume control tasklet.
Also, msleep()s in ac97 accessor callbacks are removed since the chip
works without such delays.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.25, 2005-01-03 09:15:56+01:00, perex@suse.cz
[ALSA] Use macro usb_maxpacket() for portability
USB USX2Y
In future kernels struct usb_device won't have the epmaxpacketin/out members.
Use macro usb_maxpacket() instead of directly accessing those members.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.24, 2005-01-03 09:14:44+01:00, perex@suse.cz
[ALSA] Remove the NULL pointer check in kfree/vfree wrappers
ALSA Core
The check of NULL pointer in kfree/vfree wrappers is removed.
kfree() and vfree() accept NULL pointer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.23, 2005-01-03 09:13:42+01:00, perex@suse.cz
[ALSA] Added VIA82xx-modem driver
Documentation,PCI drivers,VIA82xx-modem driver
Added the VIA82xx AC97 modem driver by Sasha Khapyorsky <sashak@smlink.com>.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.22, 2005-01-03 09:12:28+01:00, perex@suse.cz
[ALSA] ALSA core: misc cleanups
HWDEP Midlevel,ALSA Core,PCM Midlevel,RawMidi Midlevel
ALSA<-OSS emulation,ALSA sequencer,ALSA<-OSS sequencer
The patch below does the following cleanups under sound/core/ :
- make needlessly global code static
- remove the following stale prototypes from pcm.h
(the functions are not or no longer present):
- snd_pcm_capture_ready_jiffies
- snd_pcm_playback_ready_jiffies
- remove the following unused global functions:
- oss/pcm_plugin.c: snd_pcm_plug_capture_channels_mask
- seq/seq_instr.c: snd_seq_cluster_new
- seq/seq_instr.c: snd_seq_cluster_free
- move global to static inline functions
- pcm_lib.c: snd_pcm_playback_ready
- pcm_lib.c: snd_pcm_capture_ready
- pcm_lib.c: snd_pcm_playback_empty
- pcm_lib.c: snd_pcm_capture_empty
- pcm_lib.c: snd_pcm_playback_data
- remove the following unused EXPORT_SYMBOL's:
- snd_create_proc_entry
- snd_interval_ratden
- snd_midi_channel_init
- snd_midi_channel_init_set
- snd_pcm_playback_empty
- snd_pcm_capture_empty
- snd_pcm_playback_data
- snd_pcm_capture_poll
- snd_pcm_playback_ready
- snd_pcm_capture_ready
- snd_pcm_format_size
- snd_pcm_open
- snd_pcm_playback_poll
- snd_pcm_playback_ready
- snd_pcm_release
- snd_pcm_subformat_name
- snd_remove_proc_entry
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.21, 2005-01-03 09:11:10+01:00, perex@suse.cz
[ALSA] check __copy_to_user in sscape_upload_bootblock()
Sound Scape driver
__copy_to_user() is called without checking its return value in
sound/isa/sscape.c::sscape_upload_bootblock .
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.20, 2005-01-03 09:10:09+01:00, perex@suse.cz
[ALSA] ifdef typos: sound_isa_es18xx.c
ES18xx driver
Changed CONFIG_PNP_ to CONFIG_PNP, also fixed a comment related to
another CONFIG_PNP.
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.19, 2005-01-03 09:08:30+01:00, perex@suse.cz
[ALSA] ifdef typos: sound_isa_cs423x_cs4231_lib.c
CS4231 driver
Funny typo.
Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.18, 2005-01-03 09:06:34+01:00, perex@suse.cz
[ALSA] Fix interface type for some mixer controls
RME96 driver
The interface type of some basic mixer controls is changed from
IFACE_PCM to IFACE_MIXER so that it can be accessed from mixer apps.
Signed-off-by: Peter Chrisensen <peter@developers.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.17, 2005-01-03 09:04:45+01:00, perex@suse.cz
[ALSA] Fix the interface type of mixer controls
RME32 driver
The patch will change SNDRV_CTL_ELEM_IFACE_PCM to
SNDRV_CTL_ELEM_IFACE_MIXER for some mixer elements of rme32.
Signed-off-by: Martin Langer <martin-langer@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.421.16, 2005-01-03 09:03:11+01:00, perex@suse.cz
[ALSA] [trivial] Fix compilation warnings on 64bit
SPARC cs4231 driver
Fixed the compilation warnings about the pointer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ChangeSet@1.1938.1.198, 2005-01-02 17:51:04-08:00, nickpiggin@yahoo.com.au
[PATCH] ia64 4-level pgtable fix
Fix a 4-level page table bug that slipped through (introduced by me,
not Andi).
Compiles and boots on ia64 and 2-level i386.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.197, 2005-01-02 17:49:03-08:00, torvalds@evo.osdl.org
x86 single-step: fix up comments and cleanup.
Pretty much all the TF-related comments were stale, and
had been for a long time. Fix them up, clean up code.
ChangeSet@1.1938.1.196, 2005-01-02 17:17:29-08:00, torvalds@ppc970.osdl.org
x86 ptrace: remove long stale (and bitrotted) test for
PT_DTRACE without PT_PTRACED.
Long ago, the "D" in PT_DTRACE meant "Delayed", and it was used
as a flag to mark that we had ptrace'd the process but no longer
did so. That hasn't been true in a while now, and the flag should
probably be renamed, but in the meantime the test for PT_PTRACED
being cleared had been corrupted into something totally nonsensical.
Pointed out by Andi Kleen.
ChangeSet@1.1938.479.1, 2005-01-02 20:27:25+00:00, rmk@flint.arm.linux.org.uk
[MMC] Fix UNSTUFF_BITS
Quieten down compiler warnings, and fix an off-by-one bug when
deciding whether to include the next word.
ChangeSet@1.1938.472.13, 2005-01-02 20:19:07+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add DMA mmap support for SA1100/PXA framebuffer drivers.
Since the framebuffers are allocated via dma_alloc_writecombine() we
should use the DMA mmap interface to map these buffers.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.467.9, 2005-01-02 21:17:55+01:00, kaos@ocs.com.au
kallsyms: Avoid kallsyms corner case on _etext and _einittext
Avoid kallsyms corner case on _etext and _einittext with
CONFIG_KALLSYMS_ALL=n.
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.1.193, 2005-01-02 11:45:13-08:00, torvalds@evo.osdl.org
acpi video device enumeration: fix incorrect device list allocation
It didn't allocate space for the final terminating entry,
which caused it to overwrite the next slab entry, which in turn
sometimes ended up being a slab array cache pointer. End result:
total slab cache corruption at a random time afterwards. Very
nasty.
ChangeSet@1.1938.1.192, 2005-01-02 10:49:42-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] diskonchip missing iomem annotations
some trivial iomem annotations were still missing
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.191, 2005-01-02 10:49:27-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] pc300 portability fixes
local variable used to store flags after spin_lock_irqsave() should be
unsigned long, not u32. That should complete the 64bit cleanups in
there.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.190, 2005-01-02 10:49:14-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ppc uaccess annotations
- get_user() __gu_val should be unsigned long (same as with i386 patch)
- __copy_to_user() et.al. didn't have proper type checking
- documented the casts in __copy_tofrom_user() calls with __force.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.189, 2005-01-02 10:47:03-08:00, rusty@rustcorp.com.au
[PATCH] Fix cleanup path when sysctl registration fails
nfsim gains sysctl support, and sure enough, --failtest uncovered an
unregister when the registration had failed.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.188, 2005-01-02 10:46:04-08:00, rusty@rustcorp.com.au
[PATCH] Fix proc removal in ip_conntrack_standalone
Someone thought it would be clever if proc code ignores removal of
non-existent entries. Hence, we missed that /proc/net/stat/ip_conntrack
is never removed on module removal or init failure.
Found by nfsim.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.187, 2005-01-02 09:49:29-08:00, rddunlap@osdl.org
[PATCH] parport_pc: don't mix module parameter styles
Somehow parport_pc.c ended up with mixed old-style and new-style module
parameters, but mixing them is not allowed.
Use module_param() instead of MODULE_PARM() -- cannot be mixed.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.186, 2005-01-02 09:49:16-08:00, wli@holomorphy.com
[PATCH] sparc32: fix blank screen problem in cg6.c
Although the CG6 framebuffer is detected and initialized, without this
patch all it displays is a blank screen. Tested on an Ultra 1 with a
TGX+.
Originally from Bob Breuer for the CG14.
Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.185, 2005-01-02 09:49:03-08:00, wli@holomorphy.com
[PATCH] sparc32: remove conflicting definition of _exit()
sparc32 had a conflicting _exit, removed the line from asm-
sparc/unistd.h. This is the same change that DaveM made to sparc64 here:
http://linux.bkbits.net:8080/linux-2.6/diffs/include/asm-
sparc64/unistd.h@1.33
Warning was:
In file included from include/linux/unistd.h:9,
from init/main.c:45:
include/asm/unistd.h:489: warning: conflicting types for built-in
function '_exit'
Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.184, 2005-01-02 09:48:52-08:00, wli@holomorphy.com
[PATCH] sparc32: fix incomplete irqreturn_t sweep in include/asm-sparc/floppy.h
Squelch the floppy compile warning:
include/asm/floppy.h: In function `sun_fd_request_irq':
include/asm/floppy.h:276: warning: passing arg 2 of `request_fast_irq'
from incompatible pointer type
Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.183, 2005-01-02 09:48:39-08:00, wli@holomorphy.com
[PATCH] sparc32: fix missing handling for VM fault codes
Fix missing cases for vm fault codes in sparc32 fault handling, and
convert the entire file to using symbolic fault codes. This fixes a
latent bug where an allocation failure returns to the kernel instead of
delivering an error as expected.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.182, 2005-01-02 09:48:26-08:00, wli@holomorphy.com
[PATCH] sparc32: fix sbus rtc warnings
Add a sparc #ifdef to drivers/char/rtc.c and iomem annotations to
drivers/sbus/char/rtc.c
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.181, 2005-01-02 09:48:13-08:00, wli@holomorphy.com
[PATCH] sparc32: unused variable in sunsu.c
serio is unused except in the #ifdef CONFIG_SERIO paths. To kill the
warning, make the declaration conditional on the same.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.180, 2005-01-02 09:48:00-08:00, wli@holomorphy.com
[PATCH] sparc32: arch/sparc/kernel/pcic.c iomem annotations
arch/sparc/kernel/pcic.c trips numerous warnings due to iomem
annotations. This patch adds various needed iomem annotations.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.179, 2005-01-02 09:47:47-08:00, wli@holomorphy.com
[PATCH] sparc32: fix missing return value for svr4_setcontext()
sparc32 svr4_setcontext() needs to return a value in the SIGSEGV path.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.178, 2005-01-02 09:47:34-08:00, wli@holomorphy.com
[PATCH] sparc32: fix initrd memcpy problem
The latter hunk of the forwarded patch has already been applied, so
please apply the patch as it appears in the un-forwarded part. I've
taken some liberties in adding the Acked/Signed-off lines in what I
hope is an agreeable way.
On Sun, Nov 14, 2004 at 11:16:40PM -0500, Jurij Smakov wrote:
> As a followup: I have tried fiddling more with the memcpy() routine.
> Insight from Rob Radez and comments in arch/sparc/lib/blockops.S suggest,
> that __copy_1page assumes that the memory regions copied are aligned on a
> double-word boundary. I have checked, that in the cramfs case it wasn't
> true, the destination was not aligned on the double-word boundary. So, I
> have implemented a simple workaround (see patch below), which together
> with Bob Breuer's iommu.c fix [0] made 2.6.8 kernel to boot on my
> machine (SS10 with Ross Hypersparc CPU)! I also confirm, that adding the
> suggested fix to the srmmu.c also [1] breaks sunlance on my machine. With
> that "fix" the line 'eth0: Memory error, status 88c3, addr 3713ba' is
> displayed continuously during boot, when it comes to configuring network
> interfaces. The successful patch for me is:
Acked-by: William Irwin <wli@holomorphy.com>
Acked-by: Dave Miller <davem@davemloft.net>
Signed-off-by: Jurij Smakov <jurij@wooyd.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.177, 2005-01-02 09:47:21-08:00, wli@holomorphy.com
[PATCH] sparc32: sun4d update
Chris Newport and Thomas Bogendoerfer have been working to get the
sun4d port functional again. This patch updates 2.6.10-rc3 to a current
snapshot of their work. It does the following 3 things:
(1) add sun4d hook to sbus_bus_ranges_init()
(2) fix up pgd_offset() call in sun4d iommu code
(3) fix up sun4d's definition of current
Signed-off-by: Chris Newport <crn@netunix.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.176, 2005-01-02 09:47:08-08:00, wli@holomorphy.com
[PATCH] sparc32: fix hypersparc dvma
DVMA is having aliasing problems. Bob originally sent in the following
description:
At some point in the past, Bob Breuer wrote:
> Here's the preliminary patch. This time around, both the hme
> and esp drivers are working for me. This replaces my previous
> patch and is against the vanilla 2.6.9 kernel. I've tried to
> reduce the amount of unnecessary cache flushing, therefore this
> will need some testing on non-hypersparc cpus also. It needs
> some cleanup yet, and will be rediffed against a later kernel.
> I'm looking for comments and feedback.
This patch represents one of those subsequent rediffings.
Signed-off-by: Bob Breuer <breuerr@mc.net>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.175, 2005-01-02 09:46:55-08:00, akpm@osdl.org
[PATCH] floppy build fix
drivers/block/floppy.c: In function `init_module':
drivers/block/floppy.c:4598: error: parse error before "UTS_RELEASE"
Not sure what went wrong here - just kill the thing.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.174, 2005-01-02 09:46:42-08:00, akpm@osdl.org
[PATCH] fix inet6_sk for non IPV6 builds again
The recent ipv6 "fix" broke the build:
security/selinux/avc.c: In function `avc_audit':
security/selinux/avc.c:581: warning: implicit declaration of function `inet6_sk'
security/selinux/avc.c:581: warning: initialization makes pointer from integer without a cast
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.173, 2005-01-02 09:46:29-08:00, michal@logix.cz
[PATCH] Add Michal Ludvig to CREDITS
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.172, 2005-01-02 09:46:16-08:00, michal@logix.cz
[PATCH] VIA PadLock compilation fixes
This patch contains two fixes for VIA PadLock compilation with GCC 2.95.3
and GCC 3.4.3 (original patch was tested with 3.3.4 only).
Signed-off-by: Michal Ludvig <michal@logix.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.171, 2005-01-02 09:46:03-08:00, akpm@osdl.org
[PATCH] ia64 PTRS_PER_PGD build fix
mm/memory.c:1944:6: missing binary operator before token "long"
The preprocessor doesn't like the typecast....
PTRS_PER_PGD isn't used in assembly code, so this looks to be safe enough..
This patch helps, but the ia64 build is still broken. There is no
implementation of __pmd_alloc().
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.170, 2005-01-02 09:45:50-08:00, akpm@osdl.org
[PATCH] sparc64 pmd_offset() fix
mm/memory.c: In function `zeromap_pud_range':
mm/memory.c:1053: warning: suggest parentheses around + or - inside shift
mm/memory.c: In function `remap_pud_range':
mm/memory.c:1170: warning: suggest parentheses around + or - inside shift
Parenthesize this macro arg.
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.169, 2005-01-02 09:45:38-08:00, akpm@osdl.org
[PATCH] setup_pci.c build fix
On sparc64:
drivers/ide/setup-pci.c:310: error: `DMA_32BIT_MASK' undeclared (first use in this function)
drivers/ide/setup-pci.c:310: error: (Each undeclared identifier is reported only once
drivers/ide/setup-pci.c:310: error: for each function it appears in.)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.168, 2005-01-02 09:40:33-08:00, rusty@rustcorp.com.au
[PATCH] ipt_ECN corrupt checksum fix
Nasty bug, caught while writing the ECN target test. Corrupts
checksums of packets when target is used on them.
Let this be a warning on the evils of casts.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.478.1, 2005-01-02 20:08:59+11:00, airlied@starflyer.(none)
drm: mark ffb as broken because it actually is
The ffb driver has been broken since 2.6.8 at least, so mark it
as so. This also contains some fixes so it at least compiles.
Signed-off-by: Dave Airlie <airlied@linux.ie>
ChangeSet@1.1938.1.167, 2005-01-01 14:02:07-08:00, ak@suse.de
[PATCH] convert x86_64 to 4 level page tables
Converted to true 4levels. The address space per process is expanded to
47bits now, the supported physical address space is 46bits.
Lmbench fork/exit numbers are down a few percent because it has to walk
much more pagetables, but some planned future optimizations will
hopefully recover it.
See Documentation/x86_64/mm.txt for more details on the memory map.
Signed-off-by: Andi Kleen <ak@suse.de>
Converted to pud_t by Nick Piggin.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.166, 2005-01-01 14:01:54-08:00, nickpiggin@yahoo.com.au
[PATCH] convert ia64 to generic nopud header
Convert ia64 architecture over to handle 4 level pagetables.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.165, 2005-01-01 14:01:39-08:00, ak@suse.de
[PATCH] convert i386 to generic nopud header
i386 works with 2 and 3 levels
Signed-off-by: Andi Kleen <ak@suse.de>
Converted to use pud_t by Nick Piggin
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.164, 2005-01-01 14:01:24-08:00, nickpiggin@yahoo.com.au
[PATCH] introduce fallback header
Add a temporary "fallback" header so architectures can run with the 4level
patgetables patch without modification. All architectures should be
converted to use the folding headers (include/asm-generic/pgtable-nop?d.h)
as soon as possible, and the fallback header removed.
Make all architectures include the fallback header, except i386, because that
architecture has earlier been converted to use pgtable-nopmd.h under the 3
level system, which is not compatible with the fallback header.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.163, 2005-01-01 14:01:09-08:00, ak@suse.de
[PATCH] convert Linux to 4-level page tables
Extend the Linux MM to 4level page tables.
This is the core patch for mm/*, fs/*, include/linux/*
It breaks all architectures, which will be fixed in separate patches.
The conversion is quite straight forward. All the functions walking the page
table hierarchy have been changed to deal with another level at the top. The
additional level is called pml4.
mm/memory.c has changed a lot because it did most of the heavy lifting here.
Most of the changes here are extensions of the previous code.
Signed-off-by: Andi Kleen <ak@suse.de>
Converted by Nick Piggin to use the pud_t 'page upper' level between pgd
and pmd instead of Andi's pml4 level above pgd.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.162, 2005-01-01 14:00:55-08:00, nickpiggin@yahoo.com.au
[PATCH] introduce 4-level nopud folding header
Generic headers to fold the 4-level pagetable into 3 levels.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.161, 2005-01-01 14:00:42-08:00, nickpiggin@yahoo.com.au
[PATCH] replace clear_page_tables with clear_page_range
Rename clear_page_tables to clear_page_range. clear_page_range takes byte
ranges, and aggressively frees page table pages. Maybe useful to control
page table memory consumption on 4-level architectures (and even 3 level
ones).
Possible downsides are:
- flush_tlb_pgtables gets called more often (only a problem for sparc64
AFAIKS).
- the opportunistic "expand to fill PGDIR_SIZE hole" logic that ensures
something actually gets done under the old system is still in place.
This could sometimes make unmapping small regions more inefficient. There
are some other solutions to look at if this is the case though.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.160, 2005-01-01 14:00:27-08:00, ak@suse.de
[PATCH] split copy_page_range
Split copy_page_range into the usual set of page table walking functions.
Needed to handle the complexity when moving to 4 levels.
Signed-off-by: Andi Kleen <ak@suse.de>
Split out from Andi Kleen's 4level patch by Nick Piggin.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.159, 2005-01-01 14:00:15-08:00, nickpiggin@yahoo.com.au
[PATCH] convert i386 to generic nopmd header
Adapt the i386 architecture to use the generic 2-level folding header.
Just to show how it is done.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.158, 2005-01-01 14:00:01-08:00, nickpiggin@yahoo.com.au
[PATCH] generic 3-level nopmd folding header
Generic headers to fold the 3-level pagetable into 2 levels.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.157, 2005-01-01 13:59:48-08:00, nickpiggin@yahoo.com.au
[PATCH] parentheses to x86-64 macro
Add parentheses to x86-64's pgd_index's arguments
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.1.156, 2005-01-01 13:47:42-08:00, torvalds@evo.osdl.org
x86: single-step over "popf" without corrupting state.
This still leaves "pushf" able to see that somebody is
single-stepping us, but that is at least something you
can work around.
ChangeSet@1.1938.1.155, 2005-01-01 13:11:08-08:00, torvalds@evo.osdl.org
x86: be a lot more careful about TF handling.
This should fix Wine for some games that otherwise
seem to think that they run under a debugger.
ChangeSet@1.1938.1.154, 2005-01-01 12:24:01-08:00, torvalds@evo.osdl.org
x86: common send_sigtrap helper for debug event SIGTRAP's,
and use that for system call single-step events.
This one also gets the user mode test right, and makes sure
the siginfo is not leaking any stack contents.
ChangeSet@1.1938.1.153, 2005-01-01 12:21:12-08:00, torvalds@evo.osdl.org
Now that sparse looks into asms, fix the fake anti-optimizer cast
macro to use the right address space.
ChangeSet@1.1938.477.3, 2005-01-01 19:02:55+00:00, rmk@flint.arm.linux.org.uk
[ARM] Remove static mapping for RTC on Integrator/AP
ChangeSet@1.1938.477.2, 2005-01-01 18:08:52+00:00, rmk@flint.arm.linux.org.uk
[ARM] Update Integrator RTC driver.
This updates the Integrator RTC driver to use the ARM common RTC
interface, and converts the driver to behave as a standard AMBA
peripheral driver.
ChangeSet@1.1938.477.1, 2005-01-01 16:29:07+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2338/1: IXP465 and IXDPG465 header file updates
Patch from Deepak Saxena
Update IXP4xx header files with new registers for IXP46x CPU family.
Replaces 2306/1
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1938.1.152, 2005-01-01 23:20:59+11:00, airlied@starflyer.(none)
drm: core changes broke i810/830
Reported by Joseph Fannin during -mm, revert incorrect change.
Signed-off-by: Dave Airlie <airlied@linux.ie>
ChangeSet@1.1938.1.151, 2004-12-31 18:36:38+11:00, airlied@starflyer.(none)
drm: make reclaim_buffers take dev argument
Allow drivers to override reclaim_buffers in an OS-independent
way by passing drm_device_t* as first parameter, like in the
BSD version.
From: Felix Kuehling <fxhuehl@gmx.de>
Signed-off-by: Dave Airlie <airlied@linux.ie>
ChangeSet@1.1938.1.150, 2004-12-31 18:24:53+11:00, airlied@starflyer.(none)
drm: use spin_lock_init instead of SPIN_LOCK_UNLOCKED
From: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
ChangeSet@1.1938.1.149, 2004-12-31 18:18:54+11:00, airlied@starflyer.(none)
drm: correct historic mis-attribution of copyright
From: Keith Withwell <keithw@tungstengraphics.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
ChangeSet@1.1938.1.148, 2004-12-31 18:15:21+11:00, airlied@starflyer.(none)
Make 1-bit fields be unsigned (no sign bit :).
sparse complains about them:
drivers/char/drm/sis_ds.h:88:12: warning: dubious one-bit signed bitfield
drivers/char/drm/sis_ds.h:89:16: warning: dubious one-bit signed bitfield
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
ChangeSet@1.1938.476.1, 2004-12-31 12:46:36+11:00, airlied@starflyer.(none)
drm: Use wbinvd macro instead of assembly for it,
From: Stefan Dirsch <sndirsch@suse.de>
Signed-off-by: Dave Airlie <airlied@linux.ie>
ChangeSet@1.1938.475.3, 2004-12-31 00:26:38+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2307/1: Add IXP46x and IXDPG465 implementation
Patch from Deepak Saxena
Patch adds implementation details for IXP46x CPUs and new IXDPG465
reference platform.
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1938.475.2, 2004-12-31 00:20:31+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2339/1: Don't mask IRQ_STATUS with IXP2000_VALID_IRQ_MASK
Patch from Deepak Saxena
Supersedes 2226/1
According to the IXP Programmer's Reference Manual, a read from
IRQ_STATUS can only return '1' for IRQ sources that have been
explicitly enabled in IRQ_ENABLE. So if we never enable 'invalid'
IRQ sources, we don't actually have to mask off IRQ_STATUS with
IXP2000_VALID_IRQ_MASK.
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1938.475.1, 2004-12-31 00:14:52+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add missing end of comment.
ChangeSet@1.1938.472.12, 2004-12-31 00:03:58+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add CLCD driver mmap method and callbacks.
Convert CLCD driver such that boards can use the dma_mmap_*()
interfaces where appropriate.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.1.145, 2004-12-30 15:23:01-08:00, torvalds@ppc970.osdl.org
Merge bk://bart.bkbits.net/ide-2.6
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.1938.1.144, 2004-12-30 15:21:16-08:00, acme@conectiva.com.br
[PATCH] Fix net/core/sock.o build failure
This fixes a build failure that happens when you don't select IPV6.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.469.11, 2004-12-30 22:40:35+01:00, bzolnier@trik.(none)
[patch] Intel ICH7 DID's, PIRQ and PATA support
From: Jason Gaston <jason.d.gaston@intel.com>
This patch adds the Intel ICH7 DID's to the pci_ids.h file
and updates the piix driver and related files for PATA support.
bart: this patch also adds PIRQ support
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.10, 2004-12-30 20:29:23+01:00, bzolnier@trik.(none)
[ide] make host drivers aware of the changes made to ide_setup_pci_device{s}
- nothing clever here: the most noticeable change is the change of
returned value for (*init_setup) in struct ide_pci_device_s which
goes from void to int. Anything else is editing and checking for
errors in the output of the compiler;
- pci_disable_device() added for the error path in pci_init_sgiioc4();
- BUG() removed in amd74xx_probe(): good old printk() is enough.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.9, 2004-12-30 20:16:30+01:00, bzolnier@trik.(none)
[ide] propagate the error status in ide_pci_enable/ide_setup_pci_controller
- no need to overwrite the status code returned by the pci_xyz() functions;
- jump into the new century and use DMA_32BIT_MASK;
- misc cleanup in the error paths. It should not add a huge value in
ide_pci_enable() due to the FIXME comment but it should not bite too hard
either.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.8, 2004-12-30 20:08:53+01:00, bzolnier@trik.(none)
[ide] clean up error path in do_ide_setup_pci_device()
ide_setup_pci_controller() puts the device in a PCI enabled state.
The patch adds a small helper to balance it when things go wrong.
Actually the helper does not *exactly* balance the setup: if it can
not do a better job, ide_setup_pci_controller() may only enable some
BARS whereas the new counterpart will try to disable everything.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.7, 2004-12-30 19:26:14+01:00, bzolnier@trik.(none)
[ide] propagation of error code in PCI IDE setup
- Change the return value and the prototype of do_ide_setup_pci_device
Due to lack of appropriate return status code, the current clients of
do_ide_setup_pci_device() can not distinguish a failing invocation
from a successfull one. The patch modify do_ide_setup_pci_device() so
that it can propagate some of the errors from the lower layers.
- Make ide_setup_pci_device() aware of the change and propagate the news
itself. I only gave a quick sight to create_proc_ide_interfaces() (and
ide_remove_proc_entries()) but they do seem sane and it should not matter
if it fails or not.
- ide_setup_pci_devices(): mostly the same thing than ide_setup_pci_device().
do not look trivially suspect.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.6, 2004-12-30 19:07:00+01:00, bzolnier@trik.(none)
[ide] fix return codes in the generic PCI IDE driver
From: Alan Cox <alan@redhat.com>
This patch updates ide/pci/generic.c to fix the incorrect returns
causing PCI devices to be left reserved wrongly by the driver.
From: Francois Romieu <romieu@fr.zoreil.com>
Use -ENODEV instead of -EAGAIN.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.5, 2004-12-30 19:00:56+01:00, bzolnier@trik.(none)
[ide] it8172: incorrect return from it8172_init_one()
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Several IDE drivers return positive values as errors in the PCI setup
code. Unfortunately the PCI layer considers positive values as success
so the driver skips the device but still claims it and things then go
downhill.
This fixes the IT8172 driver.
From: Francois Romieu <romieu@fr.zoreil.com>
Use -ENODEV instead of -EAGAIN.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.472.11, 2004-12-30 16:55:25+00:00, rmk@flint.arm.linux.org.uk
[ARM] Add DMA mmap() support.
This adds DMA mmap() support for the ARM architecture, as discussed
around March 2003 on the linux-arch and linux-kernel mailing lists.
Subsystems such as ALSA (for sample ring buffers) and video drivers
(for framebuffers in system memory) require this infrastructure to
provide userspace with an architecture clean method to mmap these
memory areas.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
ChangeSet@1.1938.472.10, 2004-12-29 17:32:38-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] i386 uaccess annotations
get_user() stores result in a local variable that later gets cast to
integer or pointer type. The proper type for that is unsigned long.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.469.4, 2004-12-29 23:21:55+01:00, bzolnier@trik.(none)
[ide] fix cleanup_module() in ide.c
DMA should be already released by ide_unregister()
(unless interface is still busy).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.3, 2004-12-29 23:11:22+01:00, bzolnier@trik.(none)
[ide] ide-proc: kill destroy_proc_ide_interfaces()
/proc interface entries should be already unregistered
by ide_unregister() (unless interface is still busy).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.472.8, 2004-12-29 21:00:56+00:00, davis_g@com.rmk.(none)
[ARM PATCH] 2327/1: Thumb ld/st alignment fault fixups
Patch from George G. Davis
Adds support for Thumb ld/st alignment fault fixups via conversion of
Thumb ld/st instruction forms into equivalent ARM instructions and
reusing ARM alignment fault handler for Thumb instructions. This
implementation was inspired by and initially based on the algorithm
found in gdb/sim/arm/thumbemu.c.
I've backed out the silly 'T' suffix on PC in this version as requested
by RMK. At this point, I prefer to avoid making any of the other changes
discussed, e.g. dump_instr() for bad instruction cases, in order to get
the basic Thumb support change committed.
Thanks!
Signed-off-by: George G. Davis
Signed-off-by: Russell King
ChangeSet@1.1938.472.7, 2004-12-29 20:39:53+00:00, tony@com.rmk.(none)
[ARM PATCH] 2336/1: OMAP update 1/2: Arch files, take 2
Patch from Tony Lindgren
This patch syncs the mainline kernel with the linux-omap tree.
The highlights of the patch are:
- Add OMAP board specific low-level init functions for smc91x Ethernet
- DMA audio functions by Nishant Menon
- Remove references to OMAP specific serial.h
This is an updated version of ARM patch 2331/1 with extra comments
added to the omap_get_dma_src_pos() and omap_get_dma_dst_pos() functions
as recommended by RMK.
Signed-off-by: Tony Lindgren
Signed-off-by: Russell King
ChangeSet@1.1938.473.15, 2004-12-29 10:43:28-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ppc __iomem annotations - ->cfg_addr
->cfg_addr is an iomem pointer; annotated as such, setup_indirect_pci()
cleaned up.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.14, 2004-12-29 10:43:15-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ppc __iomem annotations - openpic
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.13, 2004-12-29 10:43:02-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ppc __iomem annotations - gg2
gg2_pci_config_base is an iomem pointer.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.12, 2004-12-29 10:42:49-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ppc __iomem annotations - ->cfg_data
struct pci_controller ->cfg_data annotated as iomem pointer; users
modified accordingly...
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.11, 2004-12-29 10:42:36-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] av7110_hw __user annotations fix
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.10, 2004-12-29 10:42:23-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] dib3000 portability fix
size_t is %zd, not %d...
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.9, 2004-12-29 10:42:10-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] tda80xx.c portability fix
should include asm/irq.h, not linux/irq.h
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.8, 2004-12-29 10:41:57-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] more isa-ectomy
switch to ioremap + normal iomem access primitives
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.7, 2004-12-29 10:41:44-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] hotplug NULL noise removal
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.6, 2004-12-29 10:41:31-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] ppc io.h annotations
* prototypes converted to standard ones
* bunch of useless casts killed in ioread*/iowrite*
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.5, 2004-12-29 10:41:18-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] x86_64 io.h annotations
x86-64 memcpy_toio(), memcpy_fromio(), memset_io() and read{b,w,l,q}(),
switched to standard prototypes.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.4, 2004-12-29 10:41:06-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] cinergy __user annotations
__user annotations in new code.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.3, 2004-12-29 10:40:52-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] mxser annotations and compile fixes
a) __user annotations
b) NULL noise removals
c) added missing ifdef CONFIG_PCI around the loop over mxser_pcibrds
during init.
d) declaration of CMSPAR in case if it had been undefined moved up
prior to the first use
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.2, 2004-12-29 10:40:39-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] zatm fix
Repairs the breakage introduced in gcc4 fixes. Original had expanded
to
((struct zatm_dev *)(dev)->dev_data) = zatm_dev;
and that's what gcc4 had complained about (cast-as-lvalue). Proper fix is,
of course,
dev->dev_data = zatm_dev;
What we have in 2.6.10 is
dev = (struct atm_dev *)zatm_dev;
which doesn't cause complaints, but doesn't do anything good (leak + corruption
at the very least).
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.473.1, 2004-12-29 10:40:24-08:00, viro@parcelfarce.linux.theplanet.co.uk
[PATCH] affs headers cleanup
kernel-only stuff moved from affs headers in include/linux to
fs/affs/affs.h; includes in fs/affs/*.c sanitized.
That's the patch that had been ACKed by Roman + move of function-like
macros from amigaffs.h (also ACKed) + removal of ancient #if 0'ed junk
from declaration of affs_inode_info (spotted and suggested by Roman).
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.470.6, 2004-12-29 09:13:40-08:00, matthew@wil.cx
[IA64] Enable ForteMedia in zx1 defconfig
Patch from Matthew Wilcox:
The FM801 chip is built-in to the zx2000 workstation. There's a lot
of noise in the patch because the defconfig hasn't been updated in a
few releases.
Tony> I tweaked a couple of other CONFIG options (enabled MCA_RECOVERY
and TMPFS_XATTR, disabled TCPDIAG).
Signed-off-by: Tony Luck <tony.luck@intel.com>
ChangeSet@1.1938.471.2, 2004-12-29 10:25:36-06:00, domen@coderock.org
JFS: delete unused file
Remove nowhere referenced file. (egrep "filename\." didn't find anything)
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
ChangeSet@1.1938.472.6, 2004-12-29 15:41:46+00:00, tony@com.rmk.(none)
[ARM PATCH] 2329/1: Update Kconfig for OMAP processor options
Patch from Tony Lindgren
Updates processor specific Kconfig options for OMAP
Signed-off-by: Tony Lindgren
Signed-off-by: Russell King
ChangeSet@1.1938.472.5, 2004-12-29 15:36:14+00:00, tony@com.rmk.(none)
[ARM PATCH] 2328/1: ARM Kconfig updates for OMAP leds
Patch from Tony Lindgren
ARM Kconfig updates for OMAP leds
Signed-off-by: Tony Lindgren
Signed-off-by: Russell King
ChangeSet@1.1938.472.4, 2004-12-29 15:30:34+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2326/1: Fix IXP2000 timer implementation
Patch from Deepak Saxena
This patch fixes two issues with the IXP2000 timer implementation:
- We currently to not account for lost timer interrupts
- We currently do not check for rollover within gettimeoffset()
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1938.472.3, 2004-12-29 15:25:09+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2325/1: Cleanup IXP2000 reset handling
Patch from Deepak Saxena
On IXDP2801 we need to write a magic sequence to the CPLD to ensure
a full system reset instead of just CPU reset. Also cleanup some
comments and copyrights while we are in here.
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1938.472.2, 2004-12-29 15:20:01+00:00, davis_g@com.rmk.(none)
[ARM PATCH] 2324/1: Convert ARM proc files to use domain and pgtable manifest constants
Patch from George G. Davis
Convert ARM proc files to use manifest constants defined in pgtable.h
and domain.h. This is a prelude to allow renumbering domains. The
domain renumbering is required to implement support for ARMv6 MMU
super sections where domain 0 is implied. Although this is technically
only required for ARMv6, it seemed reasonable to clean up all proc
files while here.
I did a test build with and without this patch applied and confirmed
that all proc file binaries are unchanged when this patch is applied.
Signed-off-by: George G. Davis
Signed-off-by: Russell King
ChangeSet@1.1938.472.1, 2004-12-29 15:02:36+00:00, tony@com.rmk.(none)
[ARM PATCH] 2332/1: OMAP update 1/2: Include files
Patch from Tony Lindgren
This patch syncs the mainline kernel with the linux-omap tree.
The patch mostly contains minor fixes and extra register definitions
by various OMAP developers.
Signed-off-by: Tony Lindgren
Signed-off-by: Russell King
ChangeSet@1.1938.1.141, 2004-12-28 23:28:15-08:00, drm.adm@bkbits.net
Merge bkbits.net:/repos/l/linux/linux-2.5
into bkbits.net:/repos/d/drm/drm-2.6
ChangeSet@1.1938.467.8, 2004-12-29 00:15:39+01:00, sam@mars.ravnborg.org
kbuild: Use -isystem `gcc --print-file-name=include`
Using "-nostdinc -isystem `gcc --print-file-name=include" let
us see full path to compiler specific files when compiling with make V=1
Furthermore it lets us use same definition for sparse (CHECKFLAGS) and the kernel.
Tested with gcc 3.3.4 only.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.467.7, 2004-12-28 23:00:28+01:00, ahaas@airmail.net
kbuild: Trivial Makefile patch
The comment doesn't match the function name.
From: "Art Haas" <ahaas@airmail.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.467.6, 2004-12-28 22:59:46+01:00, sam@mars.ravnborg.org
kbuild: skip localversion files with '~' anywhere in their name
Idea from: Blaisorblade <blaisorblade_spam@yahoo.it>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.470.5, 2004-12-28 13:50:56-08:00, matthew@wil.cx
[IA64] Fix memcpy_fromio prototype
Remove one layer of indirection from memcpy_fromio/memcpy_toio/memset_io
and fix the prototypes to be const where appropriate.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Tony Luck <tony.luck@intel.com>
ChangeSet@1.1938.470.4, 2004-12-28 13:46:10-08:00, davidm@hpl.hp.com
[IA64] Fix swiotlb some more:
- don't fault in unmap_single() when unmapping a coherent buffer.
- make swiotlb_alloc_coherent() more resilient for devices with
weird DMA masks
- make swiotlb_dma_supported() return a useful value
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
ChangeSet@1.1938.467.5, 2004-12-28 22:42:36+01:00, mpm@selenic.com
kbuild: make kernelrelease
This patch makes it easy to programmatically get at the kernel
makefile's idea of the kernel version from external scripts and
makefiles with something like V=`make kernelrelease`.
Alternatives include parsing Makefile (errorprone and broken by things
like localversion) and running the C preprocessor on version.h (which
requires a) building version.h somewhere and b) is really ugly).
From: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.470.3, 2004-12-28 13:42:03-08:00, davidm@hpl.hp.com
[IA64] contig.c: fix bug in DMA-zone initialization
Below is a patch that fixes count_dma_pages(). Without this fix, only
memory areas entirely below MAX_DMA_ADDRESS are counted as DMA-pages.
While it doesn't really make a difference in practice (MAX_DMA_ADDRESS
is equal to ~0UL on zx1), it's clearly not what was intended to be
there. I found the bug only because I briefly experimented with
lowering MAX_DMA_ADDRESS.
Tony> The discontig.c version of this code already gets this right.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
ChangeSet@1.1938.470.2, 2004-12-28 13:22:45-08:00, matthew@wil.cx
[IA64] Perfmon over-initialises its inodes
i_sb and i_sock are both initialised by alloc_inode()
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
ChangeSet@1.1938.467.4, 2004-12-28 22:16:26+01:00, kaos@ocs.com.au
kallsyms: gate page is part of the kernel, honour CONFIG_KALLSYMS_ALL
* Treat the gate page as part of the kernel, to improve kernel backtraces.
* Honour CONFIG_KALLSYMS_ALL, all symbols are valid, not just text.
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.467.3, 2004-12-28 22:16:00+01:00, kaos@ocs.com.au
kallsyms: Add in_gate_area_no_task()
Add in_gate_area_no_task() for use in places where no task is valid
(e.g. kallsyms). If you have a valid task, use in_gate_area() as
before.
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.470.1, 2004-12-28 13:15:44-08:00, tony.luck@intel.com
[IA64] irq_ia64.c typo s/_IA64_REG_AR_SP/_IA64_REG_SP/
Patch supplied by Sourav Sen from HP:
If I turn on IRQ_DEBUG in arch/ia64/kernel/irq_ia64.c in 2.6.8.1,
the compilation does not go thru as there isn't any _IA64_REG_AR_SP
Signed-off-by: Tony Luck <tony.luck@intel.com>
ChangeSet@1.1938.467.2, 2004-12-28 22:15:34+01:00, kaos@ocs.com.au
kallsyms: Clean up x86-64 special casing of in_gate_area()
x86-64 has special case code for in_gate_area(), but it is not clean.
* Replace CONFIG_ARCH_GATE_AREA with __HAVE_ARCH_GATE_AREA.
ARCH_GATE_AREA is not a config option.
* The definitions of get_gate_vma() and in_gate_area() are identical in
include/asm-x86_64/page.h and include/linux/mm.h. Fold the duplicate
definitions into include/linux/mm.h.
Does not affect kallsyms directly, this patch just creates a clean base
for patch 2.
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.469.2, 2004-12-28 22:05:31+01:00, bzolnier@trik.(none)
[ide] serverworks: add support for CSB6 RAID
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
The ServerWorks chips include a RAID variant that the 2.6 driver didn't
support. This enables support for this and removes a pile of #if and
other pointless obfuscations. This removes the need to use various
vendor binary only drivers for CSB6 RAID.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.469.1, 2004-12-28 20:35:01+01:00, bzolnier@trik.(none)
[ide] add "ide=nodma" to documentation
Here's a quick patch to add the currently-undocumented ide=nodma option
to the Documentation/ide.txt file. Since the code does not mark this
option as obsolete as far as I can see, I can only assume that it should
be in the documentation
Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ChangeSet@1.1938.468.1, 2004-12-28 16:22:56-02:00, acme@conectiva.com.br
[TCP] merge tcp_sock with tcp_opt
No need for two structs, follow the new inet_sock layout
style.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.467.1, 2004-12-28 19:12:15+01:00, sam@mars.ravnborg.org
kbuild: drop use of /usr/bin/env in top-level Makefile
The use of env is not needed, and caused the output makefile to be
created in some setups where it was not supposed to.
Seems to be an issue with GNU sh-utils version of env.
One user also reported env to be located in another place (/usr/local/bin/..).
This patch fixes bug: http://bugme.osdl.org/show_bug.cgi?id=3953
Thanks to "Mark Williams (MWP)" <mwp@internode.on.net> for helping tracking this down.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ChangeSet@1.1938.464.4, 2004-12-27 22:45:18-08:00, davem@nuts.davemloft.net
[SPARC64]: Include infiniband driver config and update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.464.3, 2004-12-27 22:30:04-08:00, davem@nuts.davemloft.net
Merge nuts.davemloft.net:/disk1/BK/ib-2.6
into nuts.davemloft.net:/disk1/BK/net-2.6
ChangeSet@1.1938.466.24, 2004-12-27 22:26:29-08:00, roland@topspin.com
[INFINIBAND]: InfiniBand MAINTAINERS entry
Add OpenIB maintainers information to MAINTAINERS.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.23, 2004-12-27 22:25:37-08:00, roland@topspin.com
[INFINIBAND]: Add InfiniBand Documentation files
Add files to Documentation/infiniband that describe the tree under
/sys/class/infiniband, the IPoIB driver and the userspace MAD access driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.22, 2004-12-27 22:24:37-08:00, roland@topspin.com
[INFINIBAND]: Document InfiniBand ioctl use
Add the 0x1b ioctl magic number used by ib_umad module to
Documentation/ioctl-number.txt.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.21, 2004-12-27 22:23:44-08:00, roland@topspin.com
[INFINIBAND]: Add IPoIB userspace MAD support
Add a driver that provides a character special device for each
InfiniBand port. This device allows userspace to send and receive
MADs via write() and read() (with some control operations implemented
as ioctls).
All operations are 32/64 clean and have been tested with 32-bit
userspace running on a ppc64 kernel.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.20, 2004-12-27 22:22:21-08:00, roland@topspin.com
[INFINIBAND]: Add IPoIB multicast and partition code
Add functions for handling IPoIB multicast and multiple partitions.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.19, 2004-12-27 22:21:15-08:00, roland@topspin.com
[INFINIBAND]: Add IPoIB (IP-over-InfiniBand) driver
Add a driver that implements the (IPoIB) IP-over-InfiniBand protocol.
This is a network device driver of type ARPHRD_INFINIBAND (and
addr_len INFINIBAND_ALEN bytes).
The ARP/ND implementation for this driver is not completely
straightforward, because InfiniBand requires an additional path lookup
be performed (through an IB-specific mechanism) after a remote
hardware address has been resolved. We are very open to suggestions
of a better way to handle this than the current implementation.
Although IB has a special multicast group join mode intended to
support IP multicast routing (non member join), no means to identify
different multicast styles has yet been determined, so all joins by
the driver are currently full member joins. We are looking for
guidance in how to solve this.
The IPoIB protocol/encapsulation is described in the Internet-Drafts
http://www.ietf.org/internet-drafts/draft-ietf-ipoib-architecture-04.txt
http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txt
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.18, 2004-12-27 22:19:47-08:00, roland@topspin.com
[INFINIBAND]: IPoIB IPv6 support
Add ipv6_ib_mc_map() to convert IPv6 multicast addresses to IPoIB
hardware addresses, and add support for autoconfiguration for devices
with type ARPHRD_INFINIBAND.
The mapping for multicast addresses is described in
http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txt
Signed-off-by: Nitin Hande <Nitin.Hande@Sun.Com>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.17, 2004-12-27 22:18:50-08:00, roland@topspin.com
[INFINIBAND]: IPoIB IPv4 multicast
Add ip_ib_mc_map() to convert IPv4 multicast addresses to IPoIB
hardware addresses. Also add <linux/if_infiniband.h> so INFINIBAND_ALEN
has a home.
The mapping for multicast addresses is described in
http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-08.txt
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.16, 2004-12-27 22:17:23-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver (MAD)
Add MAD (management datagram) code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.15, 2004-12-27 22:16:33-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver (last bits)
Add code for remaining InfiniBand objects (address vectors, multicast
groups, memory regions and protection domains)
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.14, 2004-12-27 22:15:37-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver (QP/CQ)
Add CQ (completion queue) and QP (queue pair) code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.13, 2004-12-27 22:14:43-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver (initialization)
Add device initializaton code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.12, 2004-12-27 22:13:44-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver (EQ)
Add event queue code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.11, 2004-12-27 22:12:48-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver (FW commands)
Add firmware command processing code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.10, 2004-12-27 22:11:50-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver (midlayer interface)
Add midlayer interface code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.9, 2004-12-27 22:10:49-08:00, roland@topspin.com
[INFINIBAND]: Add Mellanox HCA low-level driver
Add a low-level driver for Mellanox MT23108 and MT25208 HCAs. The
MT25208 is only fully supported when in MT23108 compatibility mode;
only the very beginnings of support for native MT25208 mode (required
for HCAs without local memory) is present.
(As a side note, I believe this driver would be the first in-tree
consumer of the PCI MSI/MSI-X API)
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.8, 2004-12-27 22:09:20-08:00, roland@topspin.com
[INFINIBAND]: Add InfiniBand SA (Subnet Administration) query support
Add support for sending queries to the SA (Subnet Administration). In
particular the PathRecord and MCMember (multicast group member) used
by the IP-over-InfiniBand driver are implemented.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.7, 2004-12-27 22:07:43-08:00, roland@topspin.com
[INFINIBAND]: Add InfiniBand MAD SMI support
Add MAD layer SMI (Subnet Management Interface) code.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.6, 2004-12-27 22:06:34-08:00, roland@topspin.com
[INFINIBAND]: Add InfiniBand MAD (management datagram) support (private headers)
Add MAD layer private implementation headers.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.5, 2004-12-27 22:05:25-08:00, roland@topspin.com
[INFINIBAND]: Add InfiniBand MAD (management datagram) support
Add support for handling InfiniBand MADs (management datagrams),
including sending and receiving MADs as well as passing MADs on to
local agents.
This is required for an SM (subnet manager) to discover and configure
the host, since the SM's query MADs must be passed to the local SMA
(subnet management agent). In addition, this support is used by upper
level protocols to send queries to and receive responses from the SM.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.4, 2004-12-27 22:03:33-08:00, roland@topspin.com
[INFINIBAND]: Add InfiniBand MAD (management datagram) support (public headers)
Add public headers for handling InfiniBand MADs (management
datagrams), including sending and receiving MADs as well as passing
MADs on to local agents.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.3, 2004-12-27 22:02:08-08:00, roland@topspin.com
[INFINIBAND]: Hook up drivers/infiniband
Add the appropriate lines to drivers/Kconfig and drivers/Makefile so
that the kernel configuration and build systems know about drivers/infiniband.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.2, 2004-12-27 21:58:49-08:00, roland@topspin.com
[INFINIBAND]: Add core InfiniBand support
Add implementation of core InfiniBand support. This can be thought of
as a midlayer that provides an abstraction between low-level hardware
drivers and upper level protocols (such as IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.466.1, 2004-12-27 21:57:29-08:00, roland@topspin.com
[INFINIBAND]: Add core InfiniBand support (public headers)
Add public headers for core InfiniBand support. This can be thought
of as a midlayer that provides an abstraction between low-level
hardware drivers and upper level protocols (such as
IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.464.2, 2004-12-27 21:30:55-08:00, davem@nuts.davemloft.net
Merge bk://kernel.bkbits.net/acme/connection_sock-2.6
into nuts.davemloft.net:/disk1/BK/net-2.6
ChangeSet@1.1938.465.34, 2004-12-27 21:26:00-08:00, tgraf@suug.ch
[PKT_SCHED]: dsmark should ignore ECN bits
Taking ECN bits into account doesn't make sense. The two bits were
still unused at the time the code was written so this brings back the
old behaviour.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.33, 2004-12-27 21:25:02-08:00, oleg@tv-sign.ru
[NET]: Use prefetching in skb_queue_walk().
This patch changes skb_queue_walk() in the same manner
as in list_for_each() prefetch optimization, see
http://marc.theaimsgroup.com/?l=linux-kernel&m=110399132418587
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.32, 2004-12-27 21:12:16-08:00, davem@nuts.davemloft.net
[LLC]: llc_sap_list_lock really does need to be exported.
For the case where CONFIG_LLC2 is modular and thus
llc_proc.c needs to get at this symbol.
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.31, 2004-12-27 21:08:40-08:00, davem@nuts.davemloft.net
[SPARC64]: Fix typo in previous change, s/IS_SOCK/S_ISSOCK/
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.30, 2004-12-27 21:04:56-08:00, davem@nuts.davemloft.net
[IRDA]: More staticization becomes possible in ircomm_ttp.c
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.29, 2004-12-27 20:55:17-08:00, matthew@wil.cx
[SPARC64]: Stop referencing i_sock directly.
Use S_ISSOCK() instead.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.28, 2004-12-27 20:54:03-08:00, juhl-lkml@dif.dk
[IRDA]: Kill useless parens from return statements in irnet.h
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.27, 2004-12-27 20:52:34-08:00, bunk@stusta.de
[IPVS]: Remove subscribers-only mailing list from MAINTAINERS.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.26, 2004-12-27 20:51:40-08:00, bunk@stusta.de
[PKT_SCHED]: Staticize and other cleanups.
The patch below contans the following possible cleanups:
- make some needlessly global code static
- sch_htb.c: #undef HTB_DEBUG
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.25, 2004-12-27 20:50:34-08:00, bunk@stusta.de
[RXRPC]: Staticize and remove unused globals and exports.
The patch below contains the following possible cleanups:
- make some needlessly global code static
- remove the following unused global function:
- transport.c: rxrpc_clear_transport
- remove the following unneeded EXPORT_SYMBOL:
- rxrpc_syms.c: rxrpc_call_flush
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.24, 2004-12-27 20:49:18-08:00, bunk@stusta.de
[ROSE]: Staticize and remove unused global functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.23, 2004-12-27 20:48:19-08:00, bunk@stusta.de
[NETROM]: Make needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.22, 2004-12-27 20:46:42-08:00, bunk@stusta.de
[LLC]: Staticize and remove unnecessary functions and exports.
The patch below contains the following possible cleanups:
- make some needlessly global code static
- remove the following unused global functions:
- lc_c_ac.c: llc_conn_ac_report_status
- lc_c_ac.c: llc_conn_ac_send_dm_rsp_f_set_f_flag
- lc_c_ac.c: llc_conn_ac_resend_i_cmd_p_set_1
- lc_c_ac.c: llc_conn_ac_resend_i_cmd_p_set_1_or_send_rr
- lc_c_ac.c: llc_conn_ac_send_ack_cmd_p_set_1
- lc_c_ac.c: llc_conn_ac_send_ua_rsp_f_set_f_flag
- lc_c_ac.c: llc_conn_ac_set_f_flag_p
- llc_c_ev.c: llc_conn_ev_conn_resp
- llc_c_ev.c: llc_conn_ev_rst_resp
- llc_c_ev.c: llc_conn_ev_rx_xxx_cmd_pbit_set_0
- llc_c_ev.c: llc_conn_ev_rx_xxx_yyy
- llc_c_ev.c: llc_conn_ev_any_tmr_exp
- llc_c_ev.c: llc_conn_ev_qlfy_init_p_f_cycle
- llc_c_ev.c: llc_conn_ev_qlfy_set_status_impossible
- llc_c_ev.c: llc_conn_ev_qlfy_set_status_received
- llc_if.c: llc_build_and_send_reset_pkt
- llc_pdu.c: llc_pdu_decode_cr_bit
- remove the following unneeded EXPORT_SYMBOL:
- llc_core.c: llc_sap_list_lock
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.21, 2004-12-27 20:45:07-08:00, bunk@stusta.de
[IRDA]: Staticize and remove unnecessary exports.
The patch below contains the following possible cleanups:
- make some needlessly global code static
- remove the following unused global functions:
- discovery.c: irlmp_find_device
- ircomm/ircomm_param.c: ircomm_param_flush
- irda_device.c: irda_device_set_dtr_rts
- irda_device.c: irda_device_change_speed
- irda_device.c: irda_device_set_mode
- iriap.c: iriap_getinfobasedetails_request
- iriap.c: iriap_getinfobasedetails_confirm
- iriap.c: iriap_getobjects_request
- iriap.c: iriap_getobjects_confirm
- iriap.c: iriap_getvalue
- irlan_client.c: irlan_client_reconnect_data_channel
- irlap_frame.c: irlap_send_frmr_frame
- irlmp.c: irlmp_status_request
- remove the follwong unused global variables:
- irnet/irnet_ppp.c: irnet_ppp_ops
- irsysctl.c: sysctl_compression
- qos.c: #ifndef CONFIG_IRDA_DYNAMIC_WINDOW irlap_requested_line_capacity
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.20, 2004-12-27 20:34:31-08:00, kaber@trash.net
[IPV4]: Let people know where to obtain the ss tool from.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.19, 2004-12-27 19:50:18-08:00, bunk@stusta.de
[IPV4]: Staticize and remove unneeded exports.
The patch below contains the following possible cleanups:
- make some needlessly global code static
- remove the following unused global functions:
- fib_rules.c: fib_rules_map_destination
- xfrm4_policy.: xfrm4_fini
- remove the following unneeded EXPORT_SYMBOL:
- tcp_timer.c: tcp_timer_bug_msg
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.18, 2004-12-27 18:54:21-08:00, bunk@stusta.de
[IPX]: Make needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.17, 2004-12-27 18:49:21-08:00, bunk@stusta.de
[IPVS]: Make needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.16, 2004-12-27 18:41:46-08:00, bunk@stusta.de
[AF_PACKET]: Make needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.15, 2004-12-27 18:40:25-08:00, bunk@stusta.de
[NETLINK]: Staticize and remove unused functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.14, 2004-12-27 18:38:23-08:00, bunk@stusta.de
[AF_NET]: Mark pfkey_table static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.13, 2004-12-27 18:36:20-08:00, bunk@stusta.de
[NET]: Mark eth_header_parse static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.12, 2004-12-27 18:33:52-08:00, bunk@stusta.de
[XFRM]: Staticize, and remove unused global functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.11, 2004-12-27 18:32:23-08:00, bunk@stusta.de
[X25]: Staticize, and remove unused global functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.10, 2004-12-27 18:30:49-08:00, bunk@stusta.de
[AF_UNIX]: Mark needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.9, 2004-12-27 18:29:36-08:00, bunk@stusta.de
[SUNRPC]: Staticize, kill unused functions, and remove unneeded exports.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.8, 2004-12-27 18:25:23-08:00, bunk@stusta.de
[NET]: No need to export sock_readv_writev
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.7, 2004-12-27 18:24:18-08:00, bunk@stusta.de
[AX25]: Staticize functions, and remove unused global function.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.6, 2004-12-27 18:23:16-08:00, bunk@stusta.de
[APPLETALK]: Make some code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.5, 2004-12-27 18:18:32-08:00, bunk@stusta.de
[SUNRPC]: Remove unused file net/sunrpc/auth_gss/sunrpcgss_syms.c
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.4, 2004-12-27 18:15:09-08:00, bunk@stusta.de
[SUNRPC]: Remove unused file net/sunrpc/svcauth_des.c
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.3, 2004-12-27 18:12:59-08:00, bunk@stusta.de
[SUNRPC]: Remove unused file net/sunrpc/auth_gss/gss_pseudoflavors.c
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.2, 2004-12-27 18:08:07-08:00, chas@cmf.nrl.navy.mil
[ATM]: small atm cleanups (from Adrian Bunk <bunk@stusta.de>)
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.465.1, 2004-12-27 18:06:57-08:00, tgraf@suug.ch
[PKT_SCHED]: Validate policer configuration TLVs.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.464.1, 2004-12-27 23:57:10-02:00, acme@conectiva.com.br
[INET] move inet_sock into inet_opt and rename it to inet_sock
With this we can remove all the cut'n'pasted layouts in all inet_sock
derived classes, such as tcp_sock, udp_sock, sctp_sock, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChangeSet@1.1938.463.5, 2004-12-27 15:41:28-05:00, stkn@gentoo.org
[libata] add #include (fixes 2.4 alpha build)
ChangeSet@1.1938.463.3, 2004-12-27 15:29:14-05:00, albertcc@tw.ibm.com
[libata] verify ATAPI DMA for a given request is OK
After some testing, it seems that some PATA host adapter (ex. pdc20275) cannot
work reliably with specific request buffer sizes under ATAPI DMA mode.
Detailed test result:
4096, 2048, 1024, 512, 256: OK
384, 257, 255, 128, 96, 64, 32: failed (irq lost)
It seems multiple of 256 bytes are the safe ATAPI DMA buffer sizes to use.
Attached please find the patch to fix the pdc2027x ATAPI DMA problem.
Changes:
1. Add a callback function "check_atapi_dma()" to ata_port_operations such that libata core
can ask the driver: "Can this command be processed in ATAPI DMA mode safely? "
when the the command is received.
2. ATAPI DMA is off by default if the callback function is not provided by the driver
If the callback function is not provided by the driver, the ATAPI DMA should be as is.
The ATAPI DMA is already controlled by dev->flags.
BTW, the patch isolates the ATAPI DMA workaround to the pdc20275 driver itself,
not impacting libata core .
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
ChangeSet@1.1938.463.2, 2004-12-27 15:24:53-05:00, albertcc@tw.ibm.com
[libata] PIO error handling improvement
Tested burning CD-RW with libata-dev-2.6 and cdrecord:
1. ATAPI DMA mode - tested OK
2. ATAPI PIO mode - test failed when cdrecord finishes burning and issues MODE_SELECT to the device.
After checking the log, it showed that MODE_SELECT caused ata_pio_complete() to return error.
However, the error is not handled by ata_pio_task().
Attached please find the patch for ata_pio_task() error handling for your review.
(The patch is against the libata-dev-2.6 tree. )
Changes in the patch:
1. End the PIO task when PIO_ST_IDLE state is entered
2. End the PIO task after PIO_ST_TMOUT and PIO_ST_ERR state handled by ata_pio_error()
3. Remove the first "if" statement to handle the error condition returned from
ata_pio_block(), ata_pio_complete() and ata_pio_poll().
Change #2 is not so necessary since ata_pio_error() will put the cmd to PIO_ST_IDLE state
after the error condition is handled. The change just saves a function call to queue_work().
Tested OK on on my machine with pdc20275 and ASUS CD-RW drive.
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
ChangeSet@1.1938.463.1, 2004-12-27 15:22:51-05:00, albertcc@tw.ibm.com
[libata] use PIO mode for request sense
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
ChangeSet@1.1938.462.1, 2004-12-27 15:18:56-05:00, penguin@muskoka.com
[PATCH] 2.6.9 Use skb_padto() in drivers/net/8390.c
The 8390 driver had been fixed for leaking information in short packets
prior to skb_padto() existing. This change gets rid of the scratch area on
the stack and makes it use skb_padto(). Thanks to Mark Smith for bringing
this to my attention.
Signed-off-by: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1938.461.3, 2004-12-27 15:13:29-05:00, bunk@stusta.de
[PATCH] drivers/char/hw_random.c: make a variable static
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1938.461.2, 2004-12-27 15:13:16-05:00, james4765@verizon.net
[PATCH] hw_random: Minor cleanup to hw_random.c
Clean up in drivers/char/hw_random.c:
Make debug #defines a little easier to understand.
Small whitespace cleanup.
Change some printk()'s into pr_info()'s.
Add KERN_ constant to debug printk().
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ChangeSet@1.1938.438.63, 2004-12-27 10:28:42-08:00, torvalds@ppc970.osdl.org
Merge bk://linux-scsi.bkbits.net/scsi-for-linus-2.6
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.1938.438.62, 2004-12-27 10:24:28-08:00, arjan@infradead.org
[PATCH] drivers/acpi/ibm_acpi.o .init.text refers to .exit.text
the ibm_acpi.c driver references acpi_ibm_exit() from it's __init function,
which means the exit function isn't allowed to be __exit since __exit
functions are not part of vmlinux while __init functions are.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.438.61, 2004-12-27 10:21:04-08:00, torvalds@ppc970.osdl.org
Merge bk://linux-voyager.bkbits.net/mca-2.6
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.1938.438.60, 2004-12-27 10:19:24-08:00, torvalds@ppc970.osdl.org
Revert duplicate AC97 id's.
They were already there, properly sorted too.
ChangeSet@1.1938.395.42, 2004-12-27 10:06:23-06:00, jejb@mulgrave.(none)
SCSI: fix compile warning in fc transport class
CC [M] drivers/scsi/scsi_transport_fc.o
drivers/scsi/scsi_transport_fc.c: In function `fc_stat_show':
drivers/scsi/scsi_transport_fc.c:634: warning: long long unsigned int format, long unsigned int arg (arg 4)
To us %llx on a 64 bit platform we have to cast u64 to
unsigned long long.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
ChangeSet@1.1938.395.41, 2004-12-27 09:52:25-06:00, jejb@mulgrave.(none)
SCSI: Add FC transport host attributes
From: James.Smart@Emulex.Com
This patch updates the fc_transport with attributes for local FC ports
(e.g. Hosts). The port attributes are defined per HBAAPI v2.0 definitions.
This patch results in the following in /sys/class:
-----------------------------------------------------
[jsmart@elxware class]$ cd /sys/class
[jsmart@elxware class]$ ls
fc_host graphics misc pci_bus scsi_host usb_host
fc_transport input net scsi_device tty vc
firmware mem netlink scsi_generic usb
[jsmart@elxware class]$ cd fc_host
[jsmart@elxware fc_host]$ ls
host4
[jsmart@elxware fc_host]$ cd host4
[jsmart@elxware host4]$ ls
device host_port_maxframe_size host_port_supported_speeds
host_fabric_name host_port_name host_port_symbolic_name
host_link_down_tmo host_port_speed host_port_type
host_node_name host_port_state host_tgtid_bind_type
host_port_active_fc4s host_port_supported_classes statistics
host_port_id host_port_supported_fc4s
[jsmart@elxware host4]$ ls -ld *
lrwxrwxrwx 1 root root 0 Oct 13 18:24 device -> ../../../devices/platform/host4
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_fabric_name
-rw-r--r-- 1 root root 4096 Oct 13 18:24 host_link_down_tmo
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_node_name
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_active_fc4s
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_id
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_maxframe_size
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_name
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_speed
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_state
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_classes
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_fc4s
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_speeds
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_symbolic_name
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_type
-rw-r--r-- 1 root root 4096 Oct 13 18:24 host_tgtid_bind_type
drwxr-xr-x 2 root root 0 Oct 13 18:24 statistics
Using the following script (/tmp/show_attributes):
#!/bin/sh
FILES=`ls *`
for file in $FILES; do
if [ -f $file ] ; then
echo "$file : " `cat $file`
fi
done
Here's a sample of querying the attributes:
[jsmart@elxware /]$ cd /sys/class/fc_host/host4
[jsmart@elxware host4]$ /tmp/show_attributes
host_fabric_name : 0x33334444ffeeddcc
host_link_down_tmo : 30
host_node_name : 0x78563412aabbccdd
host_port_active_fc4s : hex: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
host_port_id : 0x789abc
host_port_maxframe_size : 2511 bytes
host_port_name : 0xefcdab9011223344
host_port_speed : 2 Gbit
host_port_state : Online
host_port_supported_classes : Class 2, Class 3
host_port_supported_fc4s : hex: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
host_port_supported_speeds : 2 Gbit, 4 Gbit, 10 Gbit
host_port_symbolic_name : LP9052 Dual Port Adapter
host_port_type : NPort (fabric via point-to-point)
host_tgtid_bind_type : wwpn (World Wide Port Name)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
ChangeSet@1.1938.395.40, 2004-12-27 09:13:20-06:00, sleddog@us.ibm.com
[PATCH] ibmvscsi: replace schedule_timeout() with msleep()
Description: Use msleep() instead of schedule_timeout()
to guarantee the task delays as expected. Originally
submitted to linux-scsi by the janitors, and resubmitted
by boutcher (after testing :-)
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Dave Boutcher <boutcher@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
ChangeSet@1.1938.460.3, 2004-12-27 10:58:39+00:00, dvrabel@com.rmk.(none)
[ARM PATCH] 2323/1: Expand IXP4XX_WATCHDOG config help text
Patch from David Vrabel
Expand the IXP4XX_WATCHDOG (IXP4xx internal watchdog) config option help text with a note about its ineffectiveness.
Signed-off-by: David Vrabel
Signed-off-by: Russell King
ChangeSet@1.1938.460.2, 2004-12-27 10:53:36+00:00, catalin.marinas@com.rmk.(none)
[ARM PATCH] 2322/1: Enable ARM922T configuration option for Integrator
Patch from Catalin Marinas
This patch enables the ARM922T configuration option for the
Integrator platforms (there is an Excalibur core module available).
Signed-off-by: Catalin Marinas
Signed-off-by: Russell King
ChangeSet@1.1938.460.1, 2004-12-27 10:48:52+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 2264/1: Move platform-specific code out of entry-armv.S
Patch from Deepak Saxena
This patch borrows from the uclinux source where they have moved
the per-platform code for get_irqnr_and_base, disable_fiq, and
irq_prio_table out of entry-armv.S. However, instead of putting the
macros in arch/arm/mach-$(MACHINE)/entry-header.S, we just have
it in the machine's incdir. This means we don't need the extra
complexity of creating symlink at build time. The patch also removes
the irq_prio_table as a requirement for all machines and makes it
specific to IOC/IOMD machines.
This patch drastically shrinks entry-armv.S and allows us to delete
and add machines without having to touch generic code (there were two
dead machines laying around in entry-armv.S).
Tested on IXP4xx and test-built for just about every defconfig.
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
ChangeSet@1.1938.438.59, 2004-12-27 04:31:00-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/janitor
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.1938.438.58, 2004-12-27 04:29:21-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/misc
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.1938.438.56, 2004-12-27 04:26:39-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/viro-eth1
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.1966, 2004-12-27 10:21:15+01:00, vojtech@suse.cz
Merge suse.cz:/home/vojtech/bk/linus into suse.cz:/home/vojtech/bk/input
ChangeSet@1.1938.438.52, 2004-12-26 22:20:57-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] Early ALI watchdog support
Originally submitted by Mike Waychison <Michael.Waychison@sun.com> in
August but apparently lost.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.438.51, 2004-12-26 22:20:44-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] quiet scsi ioctls warnings
SCSI ioctls can ask for a lot of memory and fail. We don't need to vomit
in the log file for this case. Again taken from the Red Hat minor
patches applied for FC3.
Original-patch: Arjan van de Ven <arjanv@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.438.50, 2004-12-26 22:20:32-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] Paul Laufer CREDITS address update
Paul Laufer informed the list that he had changed address and his change
of address had been ignored so CREDITS was still wrong although other
files had been updated.
Fix this.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.438.49, 2004-12-26 22:20:19-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] make microcode text less confusing
Red Hat got some confused customers due to this message. The confused
user case is when they update the BIOS and all of a sudden we have "no
suitable data" yet we did before. We (Arjan van de Ven) thus changed it
to "No new microcode" which is much much clearer.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.438.48, 2004-12-26 22:20:06-08:00, alan@lxorguk.ukuu.org.uk
[PATCH] i810 more AC97 tunings
Add some more funky AC97 knowledge to the intel8x0 driver. These come
from Red Hat and its partners and are included in our shipping code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ChangeSet@1.1938.438.47, 2004-12-26 22:15:27-08:00, torvalds@ppc970.osdl.org
Merge bk://linux-dj.bkbits.net/agpgart
into ppc970.osdl.org:/home/torvalds/v2.6/linux
ChangeSet@1.1938.459.2, 2004-12-26 22:14:57-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/s2io
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.1938.459.1, 2004-12-26 22:13:59-05:00, jgarzik@pobox.com
Merge pobox.com:/garz/repo/netdev-2.6/r8169
into pobox.com:/garz/repo/net-drivers-2.6
ChangeSet@1.1938.438.45, 2004-12-25 13:54:06-08:00, davem@nuts.davemloft.net
Merge nuts.davemloft.net:/disk1/BK/net-2.6.11
into nuts.davemloft.net:/disk1/BK/net-2.6
ChangeSet@1.1938.438.44, 2004-12-24 13:26:21-08:00, torvalds@ppc970.osdl.org
Linux 2.6.10
Merry Christmas everyone. Ho ho ho!
TAG: v2.6.10