ChangeSet@1.1667, 2004-03-08 22:49:26-08:00, rusty@rustcorp.com.au
[PATCH] Clean up hotplug slab some more

This is a cleaner fix for the previous bogon fix.

ChangeSet@1.1666, 2004-03-08 22:20:06-08:00, torvalds@ppc970.osdl.org
Fix bogon in slab hotplug cleanup from Rusty.

ChangeSet@1.1665, 2004-03-08 22:06:22-08:00, rusty@rustcorp.com.au
[PATCH] minor slab cleanups for hotplug CPUs

- Move free_block prototype, and ac_entry and ac_data functions up in file.

- Use list_for_each_entry in cpuup_callback.

- Remove unneccessary g_cpucache_up in cpuup_callback.

- Make reap_timer_func take CPU number as data, and check if that is
offline before rescheduing (noop without CONFIG_HOTPLUG_CPU).

ChangeSet@1.1664, 2004-03-08 22:06:12-08:00, rusty@rustcorp.com.au
[PATCH] remove sparc64's num_possible_cpus()

Levent Serinol <levent.serinol@mynet.com> found that the hotplug cpu
patch broke Sparc64. I introduced a num_possible_cpus(), which
Sparc64 already has. Remove the Sparc64 one.

I also removed Sparc64's cpu_online() macro: it's in linux/cpumask.h
already.

ChangeSet@1.1663, 2004-03-08 22:06:03-08:00, rusty@rustcorp.com.au
[PATCH] minor cleanups for hotplug CPUs

Note that without CONFIG_HOTPLUG_CPU, online cpus == possible cpus, so
substitutions are a noop.

- Changes show_stat to print out stats for every possible cpu, not
just online CPUs.

- Allocate mem in stat_open on possible, not online_cpus.

- Add conventient macros to cpu.h: especially cpu_is_offline() for
testing if a cpu is still online.

- Add a num_possible_cpus() similar to num_online_cpus(), and define
cpu_possible_mask for UP.

- Allow printk on down cpus once system is running.

- Mask cpumask with possible, not online cpus, for sys_getaffinity().

ChangeSet@1.1662, 2004-03-08 22:05:53-08:00, rusty@rustcorp.com.au
[PATCH] introduce __drain_pages() to take a CPU number

Extracts core of drain_pages() for hotcpu use. Trivial.

Hotplug CPU needs to drain pages on a downed CPU (usually it's the
current cpu). Introduce "__drain_pages", make the CPU an argument,
and expose it if CONFIG_HOTPLUG_CPU as well as CONFIG_PM.

ChangeSet@1.1651.9.4, 2004-03-08 22:33:25-05:00, jgarzik@redhat.com
[libata sata_promise] provide proper SCSI completion function

Promise driver uses a custom error handling function, so we need
the fix that was applied to the libata core: the SCSI error
handling thread requires that we complete commands using a special
completion function, since the normal one doesn't work inside
the error handling thread.

ChangeSet@1.1651.9.3, 2004-03-08 22:23:20-05:00, jgarzik@redhat.com
[libata ata_piix] Make sure annoying BIOSen don't disable our interrupts

ChangeSet@1.1651.9.2, 2004-03-08 22:06:54-05:00, jgarzik@redhat.com
[libata] Include linux/suspend.h

ChangeSet@1.1651.9.1, 2004-03-08 21:56:57-05:00, arjanv@redhat.com
[PATCH] sata vs suspend-to-ram

The following patch is a very crude one to at least not make sata block
suspend-to-ram entirely. Probably you want more powermanagement handling as
well... but it's a start

ChangeSet@1.1651.8.2, 2004-03-08 21:23:53-05:00, brazilnut@us.ibm.com
[PATCH] pcnet32 transmit hang fix

The pcnet32 driver will hang after a few frames (<30) with the 79C971
(and probably the 79C972 though I don't have the hardware to prove it).
By interrupting slightly more frequently the hang will not occur.

ChangeSet@1.1651.8.1, 2004-03-08 21:23:45-05:00, mzyngier@freesurf.fr
[PATCH] Fix hp100 EISA probing

>>>>> "Pawel" == Pawel Sokolowski <falcon@muflon.linux.pl> writes:

Pawel> This machine has RAM BIOS booted from floppy. I ran it and EISA
Pawel> configure utility to check this once more. Card is enabled and not
Pawel> locked. I added eisa_bus.enable_dev=2 parameter but it didn't help much.
Pawel> I'm getting:

Pawel> EISA: Probing bus 0 at eisa0
Pawel> EISA: Mainboard HWPC061 detected.
Pawel> EISA: slot 2 : HWP1940 detected (forced enabled).
Pawel> EISA: Detected 1 card.

Pawel> I added this final entry you mailed but nothing changed. Still - module
Pawel> loads and unloads cleanly and without any warnings on 2.6.4-rc1. But
Pawel> does nothing - not a single line in logs/dmesg after it's loaded. Card
Pawel> does not work after modprobe, I can't get interface up.

Ok, found it.

It really looks like the new EISA probing code in hp100 never got
tested, since a precious offset has disappeared during the rewriting
process.

Please note that you still need to enable the device by hand, since
your BIOS (or maybe the EISA CFG file, since I'm seeing the exact same
problem on a Compaq machine here) doesn't properly enable the card.

Here is what I'm getting on my test system :

EISA: Probing bus 0 at 0000:00:0f.0
EISA: Mainboard CPQ0541 detected.
EISA: slot 1 : DEC4250 detected.
EISA: slot 2 : UNB0048 detected.
EISA: slot 3 : HWP1940 detected (forced enabled).
hp100: Using (slow) programmed i/o mode.
hp100: at 0x3c38, IRQ 3, EISA bus, 128k SRAM (rx/tx 75%).
hp100: Adapter is attached to 10Mb/s network (10baseT).
EISA: slot 4 : NVL0701 detected.

ChangeSet@1.1659, 2004-03-08 17:12:54-08:00, rusty@rustcorp.com.au
[PATCH] make module code use stop_machine.c

Now we've moved the bogolock code out to stop_machine.c and
generalized it a little, use it in module.c and delete the duplicate
code there.

ChangeSet@1.1658, 2004-03-08 17:12:45-08:00, rusty@rustcorp.com.au
[PATCH] stop_machine_run: Move Bogolock Code Out of module.c

The "bogolock" code was introduced in module.c, as a way of freezing
the machine when we wanted to remove a module. This patch moves it
out to stop_machine.c and stop_machine.h.

Since the code changes affinity and proirity, it's impolite to hijack
the current context, so we use a kthread. This means we have to pass
the function rather than implement "stop_machine()" and
"restart_machine()".

ChangeSet@1.1651.1.52, 2004-03-08 14:42:46-08:00, akpm@osdl.org
[PATCH] gcc-3.5 io_apic.c build fix

From: Valdis.Kletnieks@vt.edu

The send_IPI_self() in smp.c was fixed but the one in io_apic.c was not.

ChangeSet@1.1651.1.51, 2004-03-08 14:42:37-08:00, akpm@osdl.org
[PATCH] vma corruption fix

From: Hugh Dickins <hugh@veritas.com>

Fixes bugzilla #2219

fork's dup_mmap leaves child mm_rb as copied from parent mm while doing all
the copy_page_ranges, and then calls build_mmap_rb without holding
page_table_lock.

try_to_unmap_one's find_vma (holding page_table_lock not mmap_sem) coming
on another cpu may cause mm mayhem. It may leave the child's mmap_cache
pointing to a vma of the parent mm.

When the parent exits and the child faults, quite what happens rather
depends on what junk then inhabits vm_page_prot, which gets set in the page
table, with page_add_rmap adding the ptep, but junk pte likely to fail the
tests for page_remove_rmap.

Eventually the child exits, the page table is freed and try_to_unmap_one
oopses on null ptep_to_mm (but in a kernel with rss limiting, usually
page_referenced hits the null ptep_to_mm first).

This took me days and days to unravel! Big thanks to Matthieu for
reporting it with a good test case.

ChangeSet@1.1651.1.50, 2004-03-08 14:42:27-08:00, akpm@osdl.org
[PATCH] update filemap_flush() comments

It provides a best-effort, minimum-latency "get all the writeout
underway" function.

ChangeSet@1.1651.4.4, 2004-03-08 15:55:54-06:00, shaggy@austin.ibm.com
JFS: Add lots of missing statics and remove dead code

Submitted by Christoph Hellwig

ChangeSet@1.1651.1.49, 2004-03-08 12:59:06-08:00, torvalds@ppc970.osdl.org
Add missing QUEUE_FLAG_REENTER bit from Jens'
blk_start_queue() fix.

ChangeSet@1.1651.1.48, 2004-03-08 12:49:53-08:00, B.Zolnierkiewicz@elka.pw.edu.pl
[PATCH] fix CONFIG_PDC202XX_FORCE/BURST for modular pdc202xx new/old drivers

From: Jakub Bogusz <qboosh@pld-linux.org>

ChangeSet@1.1651.4.3, 2004-03-08 14:40:34-06:00, shaggy@austin.ibm.com
JFS: Avoid incrementing i_count on file create

Committing a transaction creating a file required insuring that the
inode stayed in cache until the journal was written to. i_count was
being incremented until the transaction was complete.

However, incrementing i_count caused fcntl(S_SETLEASE) to fail. I
reworked the transaction code so that the inode does not have to
stay in-memory while the transaction is being committed.

Thanks to Steve French for figuring out why setlease was failing.

ChangeSet@1.1651.1.46, 2004-03-08 12:29:33-08:00, chrisw@osdl.org
[PATCH] proper error cleanup on security_acct hook

Noted by Stephen Smalley: sys_acct does not properly clean up the open
file when the security_acct hook returns an error.

Fixed thus.

ChangeSet@1.1651.1.45, 2004-03-08 12:29:23-08:00, axboe@suse.de
[PATCH] fix blk_start_queue()

Here's the second attempt at fixing blk_start_queue(). The only change
since last version is using proper atomic bitops. If we moved the
read/write full to a different variable, we could rely on the queue lock
for plugging and stop/start of queue (by far the most used bit
operations there) and skip the atomic bitops.

ChangeSet@1.1651.3.4, 2004-03-08 12:15:15-08:00, dlstevens@us.ibm.com
[IPV4/IPV6]: Add sysctl limits for mcast src filters.

ChangeSet@1.1651.3.3, 2004-03-08 12:01:40-08:00, wensong@linux-vs.org
[IPVS]: Code tidy up.

Patch from Horms <horms@vergenet.net>

1. The trailing '\n' was missing, it has been added
2. The protocol is already in host byte order,
the ntohl() call has been removed

ChangeSet@1.1651.3.2, 2004-03-08 11:55:42-08:00, herbert@gondor.apana.org.au
[NETFILTER]: In ip_route_me_harder, don't forget to set fl.proto

ChangeSet@1.1619.6.5, 2004-03-08 11:25:39-08:00, davem@nuts.davemloft.net
[TIGON3]: Update driver version and reldate.

ChangeSet@1.1619.6.4, 2004-03-08 11:24:08-08:00, davem@nuts.davemloft.net
[TIGON3]: Always force PHY reset after major hw config changes.

ChangeSet@1.1651.4.2, 2004-03-08 13:24:03-06:00, shaggy@austin.ibm.com
JFS: warn users of inaccessible file names

When no iocharset is specified, the default action is to trivially
map each byte into the low order of the 16-bit unicode character.
If an existing name exists that has a non-zero high order byte, the
file will be inaccessible without remounting with iocharset set to
a charset that supports the character.

This patch will cause a warning to be issued to the syslog (no more
than five times) suggesting that the volume be mounted with
iocharset=utf8 in order to access the file.

ChangeSet@1.1619.6.3, 2004-03-08 11:08:13-08:00, davem@nuts.davemloft.net
[TIGON3]: Allow MAC address changing even when iface is up.

ChangeSet@1.1651.4.1, 2004-03-08 12:37:12-06:00, shaggy@austin.ibm.com
JFS: setting xattr should update ctime

ChangeSet@1.1651.1.44, 2004-03-08 08:03:34-08:00, axboe@suse.de
[PATCH] blk_insert_request() buglet

blk_insert_request() unconditionally calls q->request_fn(q) regardless
of the plug state of the queue. This means that we could invoke
request_fn with a plugged queue, which is an invalid state.

Also fix a Jamesism style in there.

ChangeSet@1.1651.1.43, 2004-03-08 08:03:25-08:00, nathans@sgi.com
[PATCH] xfs: filemap_flush() unresolved

filemap_flush() needs exporting for modular XFS builds.

ChangeSet@1.1651.1.42, 2004-03-08 08:03:15-08:00, sfr@canb.auug.org.au
[PATCH] small iSeries cleanup

This got missed in my cleanup if iSeries_vio_dev.

ChangeSet@1.1651.1.41, 2004-03-07 19:28:25-05:00, khc@pm.waw.pl
[PATCH] 2.6.x wanXL driver update

The attached patch updates wanXL card driver. Please apply to Linux 2.6.
Thanks.

Changes:
* fixed initialization kernel panic, introduced with recent alloc_netdev()
wan patch,
* wanxl_rx_intr() port# now checked before accessing port structure,
* cleanups etc.
--
Krzysztof Halasa, B*FH

ChangeSet@1.1651.1.40, 2004-03-07 19:28:18-05:00, scott.feldman@intel.com
[PATCH] missing setup for National DP83840 PHY rev b/c

* Add National DP83840 PHY rev b/c setup. Only rev a was being setup.

ChangeSet@1.1651.1.39, 2004-03-07 19:28:10-05:00, akpm@osdl.org
[PATCH] tulip printk cleanup

From: Joe Perches <joe@perches.com>

Use %08llx for a dma_addr_t, not the recently-added %llx.

ChangeSet@1.1651.1.38, 2004-03-07 08:02:56-08:00, axboe@suse.de
[PATCH] add blk_queue_stopped() helper function

The carmel driver will want to use this rather
than muck around in queue internals directly.

ChangeSet@1.1651.1.37, 2004-03-07 08:02:47-08:00, akpm@osdl.org
[PATCH] arc4.c compile fix for older gcc's

Declarations come before statements, please.

Current gcc warns about this too, bless them:

crypto/arc4.c: In function `arc4_crypt':
crypto/arc4.c:65: warning: ISO C90 forbids mixed declarations and code

ChangeSet@1.1651.1.36, 2004-03-07 00:52:03-08:00, akpm@osdl.org
[PATCH] floppy oops fix

From: Zwane Mwaikambo <zwane@linuxpower.ca>

It looks like a block request snuck through before we had initialised the
motor_off_timer timers. So I pushed the timer init earlier.

ChangeSet@1.1651.1.35, 2004-03-07 00:51:53-08:00, akpm@osdl.org
[PATCH] OSS Sound Driver Forte needs ac97_codec

From: Marc-Christian Petersen <m.c.p@wolk-project.de>

OSS Sound Driver Forte needs ac97_codec.

ChangeSet@1.1651.1.34, 2004-03-07 00:51:43-08:00, akpm@osdl.org
[PATCH] fix i2c compile warnings

drivers/i2c/busses/i2c-elv.c: In function `i2c_bitelv_init':

drivers/i2c/busses/i2c-elv.c:155: warning: unsigned int format, long int arg (arg 2)
drivers/i2c/busses/i2c-elv.c:155: warning: unsigned int format, long int arg (arg 2)
drivers/i2c/busses/i2c-velleman.c: In function `i2c_bitvelle_init':
drivers/i2c/busses/i2c-velleman.c:141: warning: unsigned int format, long int arg (arg 2)
drivers/i2c/busses/i2c-velleman.c:141: warning: unsigned int format, long int arg (arg 2)

ChangeSet@1.1651.1.33, 2004-03-07 00:51:32-08:00, akpm@osdl.org
[PATCH] Documentation/cdrom/ide-cd fix

From: David Joerg <davidjoerg@web.de>

Fix the description of the IO ports for the IDE primary and secondary
interfaces.

ChangeSet@1.1651.1.32, 2004-03-07 00:51:22-08:00, akpm@osdl.org
[PATCH] alpha ptrace race fix

From: Aneesh Kumar KV <aneesh.kumar@digital.com>

We need to set the tasks's exit code prior to waking it, not afterwards.

Acked by rth.

ChangeSet@1.1651.1.31, 2004-03-07 00:51:13-08:00, akpm@osdl.org
[PATCH] Fix nobh_prepare_write() race

Dave Kleikamp <shaggy@austin.ibm.com> points out a race between
nobh_prepare_write() and end_buffer_read_sync(). end_buffer_read_sync()
calls unlock_buffer(), waking the nobh_prepare_write() thread, which
immediately frees the buffer_head. end_buffer_read_sync() then calls
put_bh() which decrements b_count for the already freed structure. The
SLAB_DEBUG code detects the slab corruption.

We fix this by giving nobh_prepare_write() a private buffer_head end_o
handler which doesn't touch the buffer's contents after unlocking it.

ChangeSet@1.1651.1.30, 2004-03-07 00:51:03-08:00, akpm@osdl.org
[PATCH] CONFIG_LBD fixes

From: Eric Sandeen <sandeen@sgi.com>

Several functions in buffer.c are using unsigned long where they should be
using sector_t.

Also, use pgoff_t in several places so it is easier to tell what is beingused
as a pagecache index, what is being used as a disk index and what is being
used as an offset-into-page.

ChangeSet@1.1651.1.29, 2004-03-07 00:50:53-08:00, akpm@osdl.org
[PATCH] fix oops in emu10k1_wavein_open() error recovery

If a large pci_alloc_consistent() GFP_ATOMIC allocation fails this driver's
recovery code will call emu10k1_wavein_close() far earlier than it should: it
goes splat in emu10k1_timer_uninstall().

Fix it by simply removing that call: we haven't allocated any resources yet
anyway.

Note that one of the callers of emu10k1_wavein_open(), emu10k1_audio_read()
will sit there stupidly retrying the open. But it has a sleep in there so
something might eventually give way.

ChangeSet@1.1651.1.28, 2004-03-07 00:50:43-08:00, akpm@osdl.org
[PATCH] i2o subsystem minor bugfixes

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

drivers/message/i2o/i2o_block.c:

- corrected the initialization sequence of the request queues.

- added initialization to queue spinlocks.

- release device in i2o_scan because else the device could not be queried.

- i2o_block event threads wait on signal KILL but signal TERM was sent.

drivers/message/i2o/i2o_core.c:

- set the HRT length to 0 at initialization, to avoid calling free on
unallocated memory.

- i2o_core event threads wait on signal KILL but signal TERM was sent.

- added a limit of 3 tries to get the HRT from the controller.

- removed the dpt parameter, which was used to force DPT controllers get
handled by the i2o driver. Now all available i2o controllers will be
handled by this driver.

drivers/message/i2o/i2o_scsi.c:

- beautifying of printk calls.

- added scsi_unregister to properly clean up on module unload.

drivers/message/i2o/Kconfig:

- added help for i2o_block and i2o_scsi to describe the differences between
the two drivers.

include/linux/i2o-dev.h:

- cleaned typo "tate" into "state".

include/linux/i2o.h:

- removed defines from i2o_block and insert it here.

(Acked by Alan)

ChangeSet@1.1651.1.27, 2004-03-07 00:50:34-08:00, akpm@osdl.org
[PATCH] v4l1 compatibility module fix.

From: Gerd Knorr <kraxel@bytesex.org>

This patch fixes a bug in the v4l1-compat module and makes it pass the
correct buffer type to the v4l2 driver on VIDIOC_STREAM(ON|OFF) ioctls.

ChangeSet@1.1651.1.26, 2004-03-07 00:50:22-08:00, akpm@osdl.org
[PATCH] add missing MODULE_LICENSEs

From: Arjan van de Ven <arjanv@redhat.com>

ChangeSet@1.1651.1.25, 2004-03-07 00:50:11-08:00, akpm@osdl.org
[PATCH] ext2/ext3 -ENOSPC bug

From: Chris Mason <mason@suse.com>

find_group_other looks buggy for ext2 and ext3 in 2.6, it can cause -ENOSPC
errors when the fs has plenty of free room.

To hit the bug, you need a filesystem where:

parent_group has no free blocks (but might have free inodes) Every other
group with free inodes has no free blocks.

That gets you down to the final linear search in find_group_other. The
linear search has two bugs:

group = parent_group + 1; means we start searching at parent_group + 2
because the loop increments group before using it.

for(i = 2 ; i < ngroups ; i++) means we don't search through all the
groups.

The end result is that parent_group and parent_group + 1 are not checked
for free inodes in the final linear search. ext3 has the same problem.

ChangeSet@1.1651.1.24, 2004-03-07 00:50:01-08:00, akpm@osdl.org
[PATCH] sb16 sample size fix

From: Andreas Kies <andikies@t-online.de>

Fix improperly handled 16 bit sample size. If you use an odd number of
bytes in 16 bit mode the driver fails to work.

ChangeSet@1.1651.1.23, 2004-03-07 00:49:52-08:00, akpm@osdl.org
[PATCH] serial_core.h needs sched.h

In file included from drivers/misc/ibmasm/uart.c:27:
include/linux/serial_core.h: In function `uart_handle_dcd_change':
include/linux/serial_core.h:407: `TASK_INTERRUPTIBLE' undeclared (first use in this function)

ChangeSet@1.1651.1.22, 2004-03-07 00:49:42-08:00, akpm@osdl.org
[PATCH] kill a dead function in lockd

From: Christoph Hellwig <hch@lst.de>

sleep_on hurts my eyes and this offender is compltely unused, so..

ChangeSet@1.1651.1.21, 2004-03-07 00:49:31-08:00, akpm@osdl.org
[PATCH] c99 initializers for cs46xx_wrapper

From: Arnd Bergmann <arnd@arndb.de>

This use of deprecated struct initializers was hidden behind macro magic
and has appearantly not been noticed before.

ChangeSet@1.1651.1.20, 2004-03-07 00:49:21-08:00, akpm@osdl.org
[PATCH] Fix initrd Kconfig dependencies

From: "Jim Gifford" <maillist@jg555.com>

Prevent initrd from being built if ram device is built as a module.

ChangeSet@1.1651.1.19, 2004-03-07 00:49:11-08:00, akpm@osdl.org
[PATCH] char/rio/rioctrl: fix ioctl return values

From: "Randy.Dunlap" <rddunlap@osdl.org>

From: Tony Breeds <tony@bakeyournoodle.com>

It fixes 3 places where the ioctl returns positives instead of negatives.
I've gotten feedback from the maintainer (Rogier Wolff (sp?) and he has no
objections.

ChangeSet@1.1651.1.18, 2004-03-07 00:49:01-08:00, akpm@osdl.org
[PATCH] fix put_compat_timespec prototype

From: Arnd Bergmann <arnd@arndb.de>

The wrong argument in put_compat_timespec is marked const, causing
unnecessary compiler warnings.

ChangeSet@1.1651.1.17, 2004-03-07 00:48:52-08:00, akpm@osdl.org
[PATCH] ppc64: Convert mm_context_t to a struct

From: David Gibson <david@gibson.dropbear.id.au>

Converts the mm_context_t on ppc64 to be a struct. This lets us separate
the low_hpages flag into a separate field rather than folding it into the
actual context id. That makes things neater, since the flag is
conceptually separate and has, for example, should be propogate across a
fork whereas the context ID obviously isn't. The mm_context_id is the only
place to put arch-specific information in the mm_struct.

This patch will also make some interesting extensions to the hugepage
support much easier, such as allowing dynamic resizing of the hugepage
address space, or using special pagetables for hugepages.

ChangeSet@1.1651.1.16, 2004-03-07 00:48:42-08:00, akpm@osdl.org
[PATCH] ppc64: iSeries virtual cdrom driver

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch adds the virtual cdrom driver for PPC64 iSeries.

ChangeSet@1.1651.1.15, 2004-03-07 00:48:32-08:00, akpm@osdl.org
[PATCH] ppc64: iSeries_vio_dev cleanup

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch declares iSeries_vio_dev in an include file and includes it where
necessary. It also fixes arch/ppc64/kernel/mf.c to use the generic dma API
with iSeries_vio_dev.

ChangeSet@1.1651.1.14, 2004-03-07 00:48:23-08:00, akpm@osdl.org
[PATCH] ppc64: Make xmon survive exit after soft reset

From: Olof Johansson <olof@austin.ibm.com>

Below patch makes xmon survive a softreset invokation (and quite likely
invocations because of other traps as well).

ChangeSet@1.1651.1.13, 2004-03-07 00:48:11-08:00, akpm@osdl.org
[PATCH] fastcall / regparm fixes

From: Gerd Knorr <kraxel@suse.de>

Current gcc's error out if a function's declaration and definition disagree
about the register passing convention.

The patch adds a new `fastcall' declatation primitive, and uses that in all
the FASTCALL functions which we could find. A number of inconsistencies were
fixed up along the way.

ChangeSet@1.1651.1.12, 2004-03-07 00:47:59-08:00, akpm@osdl.org
[PATCH] drivers/sbus/char/vfc_dev.c needs mm.h

From: Jakub Bogusz <qboosh@pld-linux.org>

drivers/sbus/char/vfc_dev.c: In function `vfc_mmap':
drivers/sbus/char/vfc_dev.c:623: error: dereferencing pointer to incomplete type

ChangeSet@1.1651.1.11, 2004-03-07 00:47:49-08:00, akpm@osdl.org
[PATCH] dm: remove v1 ioctl interface

From: Joe Thornber <thornber@redhat.com>

Remove the version-1 ioctl interface.

ChangeSet@1.1651.1.10, 2004-03-07 00:47:39-08:00, akpm@osdl.org
[PATCH] svcauth_gss oops fix

From: "J. Bruce Fields" <bfields@fieldses.org>

I've done some testing with 2.6.4-rc1. It looks fine, except that one
critical patch got dropped somewhere along the way, without which
rpcsec_gss will oops.

We've changed gss_get_mic to write mic in place instead of kmalloc'ing new
memory for it; change must also be reflected in server side code.

ChangeSet@1.1651.1.9, 2004-03-06 16:11:47-08:00, trond.myklebust@fys.uio.no
[PATCH] Fix knfsd filehandles...

Here's a fix for an obvious typo in changeset
neilb@cse.unsw.edu.au|ChangeSet|20040305155724|31191
that was causing ESTALE errors galore on my NFS testrig.

ChangeSet@1.1651.1.8, 2004-03-06 09:40:18-08:00, zippel@linux-m68k.org
[PATCH] hfsplus: symlink initialization fix

This fixes a problem with creating symlinks, a few fields in the
inode/dentry were left uninitialized.

ChangeSet@1.1650.1.1, 2004-03-06 09:39:29-08:00, wesolows@foobazco.org
[SPARC32]: Avoid an oops if thread_info allocation fails

ChangeSet@1.1651.1.7, 2004-03-06 08:19:13-08:00, torvalds@ppc970.osdl.org
Merge bk://linux-acpi.bkbits.net/linux-acpi-release-2.6.4
into ppc970.osdl.org:/home/torvalds/v2.5/linux

ChangeSet@1.1651.3.1, 2004-03-05 23:27:57-08:00, kaber@trash.net
[PKT_SCHED]: Fix ipv6 ECN marking in RED scheduler.

ChangeSet@1.1651.2.2, 2004-03-06 14:47:10+11:00, nathans@sgi.com
[XFS] Fix out-of-space deadlock when flushing delalloc data with pages locked under write.

SGI Modid: xfs-linux:xfs-kern:167948a

ChangeSet@1.1651.2.1, 2004-03-06 14:21:39+11:00, sandeen@sgi.com
[XFS] zero log buffer during initialization at mount time

SGI Modid: xfs-linux:xfs-kern:167980a

ChangeSet@1.1651.1.5, 2004-03-05 18:11:56-08:00, akpm@osdl.org
[PATCH] Add missing AFAVLAB P030 PCI ID

ChangeSet@1.1651.1.4, 2004-03-05 16:16:20-08:00, benh@kernel.crashing.org
[PATCH] High BAT initialization wrong

The code initializing the "high" BATs on CPUs like the 750FX got
broken when copied over from 2.4. This cause random problems with
machines using those CPUs (iBook 2s typically).

ChangeSet@1.1651.1.2, 2004-03-05 15:19:34-08:00, davej@redhat.com
[PATCH] mismatched syscall protos.

Sparse noticed a bunch of mismatched prototypes in the new syscalls.h file
when compiling net/socket.c Whilst most of them are just missing __user
tags, the last argument of sys_socketpair was completely different.

ChangeSet@1.1652, 2004-03-05 14:45:42-08:00, davem@nuts.davemloft.net
[SPARC]: Pass a real page into do_mount() a final arg.

ChangeSet@1.1647.3.2, 2004-03-05 14:20:35-08:00, dlstevens@us.ibm.com
[IPV4]: Add sysctl for per-socket limit on number of mcast src filters.

ChangeSet@1.1647.4.1, 2004-03-05 14:15:11-08:00, i.palsenberg@jdirmedia.nl
[QLOGIC]: Mark mbox_param[] as static to avoid namespace pollution.

ChangeSet@1.1647.3.1, 2004-03-05 14:06:40-08:00, davem@nuts.davemloft.net
Merge http://linux-mh.bkbits.net/bluetooth-2.6
into nuts.davemloft.net:/disk1/BK/net-2.6

ChangeSet@1.1647.2.6, 2004-03-05 21:35:39+00:00, rmk@flint.arm.linux.org.uk
[SERIAL] Correct Oxford Semiconductor 16PCI952 PCI type entry.

WRT 2.4, Ed Vance put this fix into 2.4:

According to the data sheet, the OX16PCI952 has port 0 in BAR0 and
port 1 in BAR1. (unlike the OX16C954, BTW) The 921600 base baud value
is your oscillator rate divided by the default oversample rate, 16.

Since 2.6 PCI IDs have been updated to use the real device ID for
this part, we really should include this fix as well.

ChangeSet@1.1647.2.5, 2004-03-05 21:12:13+00:00, rmk@flint.arm.linux.org.uk
[SERIAL] Don't initialise port->mctrl before calling ->startup

If a serial port is hung up using vhangup() with HUPCL cleared (so
DTR isn't dropped), and then re-opened, we don't want to drop the
DTR line. This occurs during the login process, and dropping DTR
would cause a modem to hang up.

ChangeSet@1.1647.2.4, 2004-03-05 21:02:55+00:00, rmk@flint.arm.linux.org.uk
[SERIAL] Clear up comments concerning mapbase and membase.

ChangeSet@1.1647.2.3, 2004-03-05 20:50:33+00:00, rmk@flint.arm.linux.org.uk
[SERIAL] Remove obsolete CLPS711x serial driver names.

ChangeSet@1.1647.2.2, 2004-03-05 20:41:31+00:00, laforge@org.rmk.(none)
[SERIAL] Fix supprot for AFAVLAB 8port boards in 2.6.x

I didn't yet use one of my AFAVLAB boards with 2.6.x until now. The
upper 4 ports are not detected at all. I suppose the bug was
introduced while porting the driver from 2.4.x.

Please consider applying the following patch. It also adds support
for a new 8 port board called P030.

ChangeSet@1.1647.2.1, 2004-03-05 20:16:43+00:00, bjorn.helgaas@com.rmk.(none)
[SERIAL] Make serial console work for any port (take 2)

The current serial console code only works for ports that are either
defined in SERIAL_PORT_DFNS (and set up by serial8250_isa_init_ports())
or registered by early_serial_setup().

On ia64, SERIAL_PORT_DFNS is empty because we discover everything
via ACPI and PCI. And we only use early_serial_setup() for one port
described by the HCDP firmware table.

This patch against 2.6.4-rc1 makes it work for any valid port. If we
don't know about the port early, we just return -ENODEV from the
setup() function, which leaves the serial console disabled. After the
driver has found all the ports, we try to register the serial console
again if it hasn't been enabled already.

Keith Owens noticed that the first version of this patch broke some
serial console setups because many early serial ports are registered
with "type == PORT_UNKNOWN". So this version tests "port->ops"
instead, and Keith has confirmed that this works for him.

ChangeSet@1.1557.78.10, 2004-03-05 18:53:50+01:00, marcel@holtmann.org
[Bluetooth] Dynamic allocation of the RFCOMM TTY devices

Only allocate the RFCOMM TTY devices when they are really in use. This
prevents the system from calling hotplug and udev 256 times to create or
remove every device node. In fact this makes the loading and unloading
of the RFCOMM module much faster.

ChangeSet@1.1557.78.9, 2004-03-05 17:43:26+01:00, marcel@holtmann.org
[Bluetooth] Add notify callback for host drivers

This patch adds a notification callback to the hci_dev structure which
is used by the HCI core to tell the driver about connection creation
and clearing. It also notifies about changed voice setting.

ChangeSet@1.1557.78.8, 2004-03-05 17:27:52+01:00, marcel@holtmann.org
[Bluetooth] Send HCI_Reset for some Broadcom dongles

This patch introduces a quirk flag for sending the HCI_Reset command. In
general the HCI_Reset is not needed, but some Broadcom dongles uses this
reset command to switch from HID to HCI mode. And it is not safe to send
the HCI_Reset to every Bluetooth device, because the CSR firmware prior
HCI 12.x will reset the host transport and this is wrong according to the
Bluetooth specification.

ChangeSet@1.1647.1.2, 2004-03-05 07:57:24-08:00, neilb@cse.unsw.edu.au
[PATCH] kNFSd - Tidy up new filehandle type.

nfsd uses several different mechanisms for identifying the filesystem
from the filehandle.

This patch:
Marks type 2 as deprecated - it wastes space, and space in the filehandle
is not unlimited
Adds type 3 which handles new, large device number in 32bits of space
Tidies up the code for determining which type to use in a newly created
filehandle - the addition of type 2 broke this code.

ChangeSet@1.1647.1.1, 2004-03-04 23:05:03-08:00, bgerst@didntduck.org
[PATCH] PnP BIOS exception fixes

This fixes two errors in fixup_exception() for PnP BIOS faults:
- Check for the correct segments used for the BIOS
- Fix asm constraints so that EIP and ESP are properly reloaded

ChangeSet@1.1650, 2004-03-04 22:00:48-08:00, wesolows@foobazco.org
[SPARC]: Make parport_sunbpp compile again

ChangeSet@1.1649, 2004-03-04 21:57:18-08:00, wesolows@foobazco.org
[SPARC]: Add stack usage instrumentation

ChangeSet@1.1647, 2004-03-04 20:31:35-08:00, akpm@osdl.org
[PATCH] another rd.c leak

Free the request queues on the rd_init() error recovery path.

ChangeSet@1.1642.1.18, 2004-03-04 21:48:44-05:00, jgarzik@redhat.com
Fix ramdisk driver leak on module unload.

Noticed by me, fixed by Jens.

ChangeSet@1.1644, 2004-03-04 18:22:43-08:00, davem@nuts.davemloft.net
[FFB]: Force-disable cursor in ffb_switch_from_graph().

ChangeSet@1.1642.1.17, 2004-03-04 15:57:35-08:00, benh@kernel.crashing.org
[PATCH] Fix typo in radeonfb

This fixes a typo in the list of PCI IDs in radeonfb, which in turn
fixes detection of some mobility models.

ChangeSet@1.1640.2.3, 2004-03-04 22:17:06+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 1757/1: Allow building of LE kernels with BE-default toolchain

Patch from Deepak Saxena

The ARM makefile currently assumes that the compiler being used
defaults to little-endian builds unless the big-endian options
are provided. This may not always be the case (my toolchains default
to BE since that's what I mostly work with) so this patch forces
endianess options to be passed to the toolchain. W/O this,
building without CONFIG_CPU_BIG_ENDIAN on a big-endian toolchain
will still result in a big-endian kernel.

ChangeSet@1.1640.2.2, 2004-03-04 22:13:54+00:00, icampbell@com.rmk.(none)
[ARM PATCH] 1764/1: Export __arch_strncpy_from_user for modules

Patch from Ian Campbell

__arch_strncpy_from_user needs to be exported if you build the
framebuffer console driver as a module.

ChangeSet@1.1640.2.1, 2004-03-04 22:13:37+00:00, dsaxena@net.rmk.(none)
[ARM PATCH] 1762/1: Fix typo in CONFIG_CPU_BIG_ENDIAN help text

Patch from Deepak Saxena

ChangeSet@1.1642.1.15, 2004-03-04 13:23:44-08:00, viro@www.linux.org.uk
[PATCH] d_alloc_root() fixes: hpfs